Loading ...
Sorry, an error occurred while loading the content.

Re: 3-wire howto?

Expand Messages
  • jspraul
    See here for software intended for the 3-wire mod: (Linux required) Subject: Re: [zipitwireless] three wire mod software
    Message 1 of 3 , May 29 5:12 PM
    • 0 Attachment
      See here for software intended for the 3-wire mod: (Linux required)

      Subject: Re: [zipitwireless] three wire mod software
      http://groups.yahoo.com/group/zipitwireless/message/1434

      --- In zipitwireless@yahoogroups.com, "upt1me" <bdesarmo@...> wrote:
      >
      > I've built the 3-wire serial mod. I'm in need of instructions on
      > howto flash it with 3 wires. I've found the 5 wire tool, but it
      > doesn't seem to be working.
      >
      > Output from 5 wire mod:
      > Turn on the Zipit (press button, wait for green, release)
      > Wait 10 seconds, then press any key to start transfer
      > (DBG pin must be grounded)
      > Transfering bootstrap program
      > Transfer complete
      > Switch to 57.6kbps
      > Echo + upload commands
      > Decide what to upload
      > 'A' - allrom.bin upload (2MB)
      > 'a' - loader.bin upload (8K max)
      > 'k' - zimage.dat upload (581K max)
      > 'u' - ramdisk.gz upload (1.5MB max)
      > Follow changes with 'WYes' to write
      > Other commands
      > 'R' - grab ROM
      > //Uploading 2097168 bytes from allrom.bin
      > Zipit is not responding - not ready to upload
      > 'ยบ'
      > ^CTerminate batch job (Y/N)? y
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.