Re: [Z_Scale] Re: Pier set (elevated track)?
- Hi all,
M does make pillars/piers, single track only, which can be kit bashed for double track.
On Mon, Oct 3, 2011 at 5:23 PM, mark2playz <mark.markham@...>wrote:
> Marklin makes both the approach and elevated piers as does one of the other
> German companies (either Faller or Kibri). Ztrackresale curerntly has a
> couple of stone bridges if you are going to build your own ramps. You could
> use N scale as well. The important dimensions are that an elevated track
> passing over another should be 1 3/16" height and the grade should be under
- image uploaded, can we attach videos?
SSgt USMC, Retired
'86 Yamaha FZX-R
Z scale trains
From: mark2playz <mark.markham@...>
Sent: Sunday, October 30, 2011 7:22 PM
Subject: [Z_Scale] Re: Pier set (elevated track)?
Looking at your 10/18 layout image, there seems to be a lot of potential for crossing your reversing loops.
--- In email@example.com, Cliff Smith <cliffiniraq3@...> wrote:
> Ahhh, alternatives, I like it......Thanks also.
> SSgt USMC, Retired
> '08 TITAN
> '86 Yamaha FZX-R
> Z scale trains
> From: mark2playz <mark.markham@...>
> To: firstname.lastname@example.org
> Sent: Tuesday, October 18, 2011 2:50 PM
> Subject: [Z_Scale] Re: Pier set (elevated track)?
> Having built a "less than successful" layout with a 4% grade, I have to agree with Lindley's numbers. Assuming that you want to run a train over another, one trick you can use is to also lower the bottom track as it approaches the crossing.
[Non-text portions of this message have been removed]