Loading ...
Sorry, an error occurred while loading the content.

RE: Re: [Z_Scale] Looking for the person who is going a resin British Class 47 diesel, and coachs

Expand Messages
  • ahellary
    The guy you need I think is graham jones The main man of z club gb if hes not the right man he will know who is Hes is based in northampton
    Message 1 of 7 , Aug 3 12:47 AM
    • 0 Attachment
      The guy you need I think is graham jones



      The main man of z club gb if hes not the right man he will know who is



      Hes is based in northampton



      http://www.ford.demon.co.uk/



      tony



      _____

      From: z_scale@yahoogroups.com [mailto:z_scale@yahoogroups.com] On Behalf Of
      Arnim v. Herff
      Sent: 03 August 2010 08:38
      To: z_scale@yahoogroups.com
      Subject: [!! SPAM] Re: [Z_Scale] Looking for the person who is going a resin
      British Class 47 diesel, and coachs





      Am Montag, 2. August 2010 19:41:25 schrieb epressey2002:
      > While traveling last week, I was looking on the well know auction site,
      and
      > ran accross a gentleman that was doing British castings of a class 47 in
      > resin and transfers for marklin coaches. When I finally got home
      yesterday,
      > I could not find any trace of this gentleman. Does anyone have a leads on
      > this person. Thanks.

      Hello Ed.

      Maybe you speak of the gentleman, who posted below message via a British
      yahoo-group. Only difference seems to be that he use rapid prototyping
      instead
      of resine.

      Anyway, I hope this helps.

      Best greetz
      Arnim

      ---------- Weitergeleitete Nachricht ----------

      Betreff: [Z Gauge British and European] Any interest in possible British
      outline wagons?
      Datum: Samstag, 15. Mai 2010
      Von: "janitorium" <yahoo@... <mailto:yahoo%40janitorium.co.uk>
      >
      An: zgaugebritishandeuropean@yahoogroups.com
      <mailto:zgaugebritishandeuropean%40yahoogroups.com>

      I've been toying with doing some British outline in Z scale for some time
      now,
      and decided it would be interesting to experiment with some of the rapid
      prototyping technologies that are around now - as a result of which I've
      managed to end up with a handful of prototype wagons which you can see the
      best of here:

      http://gallery.me.com/big.stu#100040

      I'm also looking at the feasibility of brake vans (BR 20T/GWR Toad) and
      possibly even Mk 1 coaches running on MTL bogies.

      It occurred to me that other people may be interested if these could be
      produced at a reasonable price, so I thought I'd de-lurk and see if there
      was
      any interest, and try and gain some feedback on what people might like. So
      here are the questions:

      1) Is anyone interested in 16T mineral wagons or planked wagons as depicted
      in
      the gallery linked above? (Or similar variants - should be possible to
      easily
      do N-plank or even a flat wagon.)

      2) Would interest be in small quantities (less than 5) or rakes (10 or
      more)?

      3) Metal (Full-throttle 33") or plastic (MTL 33" or 36") wheels?

      4) Couplings - Marklin/MTL/Simple pin/Other?

      Or any other wagon types which might be of interest?

      My very rough back of an envelope calculation (i.e. don't hold me to this)
      suggests that in small quantities, unpainted wagons with wheelsets, buffers
      and some form of couplers are going to cost somewhere between £15-£20 to
      produce. This doesn't seem an outrageous price range to be in compared to
      the
      commercial offerings (but guess it may end up being more if they are painted

      and sensibly packaged) - what do people think?

      At the moment I guess there are three potential outcomes:

      a) There is no interest and I'll just get a few made for myself.

      b) There is some interest and it may even be possible to have them made in
      sufficient quantities for the per-unit cost to drop a bit.

      c) There is a lot of interest and it may be worth investigating 'proper'
      production technologies (e.g. injection moulding).

      So - please let me know (privately or on list) if you're interested. I look
      forward to hearing from you :) Meanwhile I shall continue experimenting with

      some simple coupler technology which is compatible with Marklin couplers and

      suitable weights...

      Stu

      -------------------------------------------------------





      [Non-text portions of this message have been removed]
    • Michael Crane
      Hi, Here is the link to the web page I believe you refer to - http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230503672915&ssPageName=ADME:B:SS:US:1123 e**y
      Message 2 of 7 , Aug 3 9:38 AM
      • 0 Attachment
        Hi,

        Here is the link to the web page I believe you refer to -

        http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230503672915&ssPageName=ADME:B:SS:US:1123


        e**y ID - and1969hill

        Regards,

        Michael.





        ________________________________
        From: epressey2002 <cap_eleven@...>
        To: z_scale@yahoogroups.com
        Sent: Mon, 2 August, 2010 18:41:25
        Subject: [Z_Scale] Looking for the person who is going a resin British Class 47
        diesel, and coachs


        While traveling last week, I was looking on the well know auction site, and ran
        accross a gentleman that was doing British castings of a class 47 in resin and
        transfers for marklin coaches. When I finally got home yesterday, I could not
        find any trace of this gentleman. Does anyone have a leads on this person.
        Thanks.

        Ed







        [Non-text portions of this message have been removed]
      • Michael Crane
        ... bloody spell checker! ID = ant1969hill Regards, Michael. ________________________________ From: Michael Crane To:
        Message 3 of 7 , Aug 3 9:40 AM
        • 0 Attachment
          ... bloody spell checker! ID = ant1969hill

          Regards,

          Michael.





          ________________________________
          From: Michael Crane <crane_alma@...>
          To: z_scale@yahoogroups.com
          Sent: Tue, 3 August, 2010 17:38:20
          Subject: Re: [Z_Scale] Looking for the person who is going a resin British Class
          47 diesel, and coachs


          Hi,

          Here is the link to the web page I believe you refer to -

          http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230503672915&ssPageName=ADME:B:SS:US:1123


          e**y ID - and1969hill

          Regards,

          Michael.

          ________________________________
          From: epressey2002 <cap_eleven@...>
          To: z_scale@yahoogroups.com
          Sent: Mon, 2 August, 2010 18:41:25
          Subject: [Z_Scale] Looking for the person who is going a resin British Class 47
          diesel, and coachs

          While traveling last week, I was looking on the well know auction site, and ran
          accross a gentleman that was doing British castings of a class 47 in resin and
          transfers for marklin coaches. When I finally got home yesterday, I could not
          find any trace of this gentleman. Does anyone have a leads on this person.
          Thanks.

          Ed

          [Non-text portions of this message have been removed]







          [Non-text portions of this message have been removed]
        • Ed Turner
          ________________________________ From: ahellary To: z_scale@yahoogroups.com Sent: Tue, August 3, 2010 3:47:51 AM Subject: RE: Re:
          Message 4 of 7 , Aug 12 5:36 AM
          • 0 Attachment
            ________________________________
            From: ahellary <ahellary@...>
            To: z_scale@yahoogroups.com
            Sent: Tue, August 3, 2010 3:47:51 AM
            Subject: RE: Re: [Z_Scale] Looking for the person who is going a resin British
            Class 47 diesel, and coachs

             
            The guy you need I think is graham jones

            The main man of z club gb if hes not the right man he will know who is

            Hes is based in northampton

            http://www.ford.demon.co.uk/

            tony

            _____

            From: z_scale@yahoogroups.com [mailto:z_scale@yahoogroups.com] On Behalf Of
            Arnim v. Herff
            Sent: 03 August 2010 08:38
            To: z_scale@yahoogroups.com
            Subject: [!! SPAM] Re: [Z_Scale] Looking for the person who is going a resin
            British Class 47 diesel, and coachs

            Am Montag, 2. August 2010 19:41:25 schrieb epressey2002:
            > While traveling last week, I was looking on the well know auction site,
            and
            > ran accross a gentleman that was doing British castings of a class 47 in
            > resin and transfers for marklin coaches. When I finally got home
            yesterday,
            > I could not find any trace of this gentleman. Does anyone have a leads on
            > this person. Thanks.

            Hello Ed.

            Maybe you speak of the gentleman, who posted below message via a British
            yahoo-group. Only difference seems to be that he use rapid prototyping
            instead
            of resine.

            Anyway, I hope this helps.

            Best greetz
            Arnim

            ---------- Weitergeleitete Nachricht ----------

            Betreff: [Z Gauge British and European] Any interest in possible British
            outline wagons?
            Datum: Samstag, 15. Mai 2010
            Von: "janitorium" <yahoo@... <mailto:yahoo%40janitorium.co.uk>
            >
            An: zgaugebritishandeuropean@yahoogroups.com
            <mailto:zgaugebritishandeuropean%40yahoogroups.com>

            I've been toying with doing some British outline in Z scale for some time
            now,
            and decided it would be interesting to experiment with some of the rapid
            prototyping technologies that are around now - as a result of which I've
            managed to end up with a handful of prototype wagons which you can see the
            best of here:

            http://gallery.me.com/big.stu#100040

            I'm also looking at the feasibility of brake vans (BR 20T/GWR Toad) and
            possibly even Mk 1 coaches running on MTL bogies.

            It occurred to me that other people may be interested if these could be
            produced at a reasonable price, so I thought I'd de-lurk and see if there
            was
            any interest, and try and gain some feedback on what people might like. So
            here are the questions:

            1) Is anyone interested in 16T mineral wagons or planked wagons as depicted
            in
            the gallery linked above? (Or similar variants - should be possible to
            easily
            do N-plank or even a flat wagon.)

            2) Would interest be in small quantities (less than 5) or rakes (10 or
            more)?

            3) Metal (Full-throttle 33") or plastic (MTL 33" or 36") wheels?

            4) Couplings - Marklin/MTL/Simple pin/Other?

            Or any other wagon types which might be of interest?

            My very rough back of an envelope calculation (i.e. don't hold me to this)
            suggests that in small quantities, unpainted wagons with wheelsets, buffers
            and some form of couplers are going to cost somewhere between £15-£20 to
            produce. This doesn't seem an outrageous price range to be in compared to
            the
            commercial offerings (but guess it may end up being more if they are painted

            and sensibly packaged) - what do people think?

            At the moment I guess there are three potential outcomes:

            a) There is no interest and I'll just get a few made for myself.

            b) There is some interest and it may even be possible to have them made in
            sufficient quantities for the per-unit cost to drop a bit.

            c) There is a lot of interest and it may be worth investigating 'proper'
            production technologies (e.g. injection moulding).

            So - please let me know (privately or on list) if you're interested. I look
            forward to hearing from you :) Meanwhile I shall continue experimenting with

            some simple coupler technology which is compatible with Marklin couplers and

            suitable weights...

            Stu

            -------------------------------------------------------

            [Non-text portions of this message have been removed]







            [Non-text portions of this message have been removed]
          Your message has been successfully submitted and would be delivered to recipients shortly.