Re: Which bulb for streetlamp?
- Thanks for the advice, John. If nobody gives me a hint about a part
number, I may have to use an LED out of necessity!
--- In firstname.lastname@example.org, "John Mui" <jmui@...> wrote:
> Roger, I had problems with the same light. I could never get the
> to work even though it wasnt burn out. I replace it with a smd from
> and added a 390k resistor from Radio Shack. The wires are superglue
> back of the post. I prefer to use leds because they last a lot
> produce less heat. Here is a link to my light thread.
> ----- Original Message -----
> From: "Roger Shimada" <rogershimada@...>
> To: <email@example.com>
> Sent: Sunday, July 27, 2008 5:44 PM
> Subject: [Z_Scale] Which bulb for streetlamp?
> > Hi all,
> > I recently acquired a layout that has a streetlamp that was hit
> > during shipping. The cover for the bulb was found (silver top,
> > bottom) but the bulb is missing.
> > The lamp is under 2 inches tall and has a circular base. A
> > of the lamp is at
> > Any help to identify the lamp, or even better which bulb it needs,
> > would be highly appreciated!