Loading ...
Sorry, an error occurred while loading the content.

Re: Marklin 0-8-8-0

Expand Messages
  • David
    the best thing you can do is spend the 35.00 and sind it to sand and glenn in florida and have them work on it. se the back of z track mag for their info if
    Message 1 of 2 , Sep 27, 2007
    • 0 Attachment
      the best thing you can do is spend the 35.00 and sind it to sand and
      glenn in florida and have them work on it.
      se the back of z track mag for their info if you can't find it e mail
      me at david_bierman@...
      --- In z_scale@yahoogroups.com, Garth Hamilton <garthah@...> wrote:
      >
      > Having some trouble with my 0-8-8-0.
      >
      > The drivers do not want to run properly. The gear below the top tower
      > gear seems to move around and the outer most driver at the gear tower
      > does not want to stay in sync and jams to running of the mechanism.
      > Anyone have any ideas on the fix for this. The engine ran well to
      > start with and then after sitting for awhile it seems to have trouble
      > binding up and stalling. The second gear down the tower has a hole in
      > the center but does not seem to sit on an axle in the chassis. Maybe
      > the plastic gear at the top in the tower has become worn out as all
      > of the other gears are metal in the drive train.
      >
      > regards
      > Garth
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.