Loading ...
Sorry, an error occurred while loading the content.
 

Re: [Z_Scale] Maybe ... just maybe!

Expand Messages
  • Craig Anderson
    Think maybe you shook all the oil out? Those gears will mesh a bit better with a teeny bit of Wahl oil to smooth their surfaces. I think the results will do
    Message 1 of 2 , Feb 1, 2007
      Think maybe you "shook" all the oil out? Those gears
      will mesh a bit better with a teeny bit of Wahl oil to
      smooth their surfaces. I think the results will do
      wonders (especially to your self-cofidence).

      Craig
      --- jvmcsea@... wrote:

      > I washed the Kroc with Radio Shack Electronics
      > Cleaner. Then flooded the
      > ultrasonic bath with the stuff up to about 1/2"
      > depth, put in the Swiss
      > locomotive and hummed it for one minute on each
      > side.
      >
      > After a 10 minute air dry I put the locomotive on
      > the track and when the
      > transformer dial was put full-on the lights came on
      > and it "jumps" about 1/8"
      > then stops (lights out). Ditto reverse operation.
      >
      > I will wait another 15 or so minutes, try again and
      > will ultrasonic wash
      > again if necessary.
      >
      > I'll keep you posted.
      >
      > John McC
      >
      >
      > [Non-text portions of this message have been
      > removed]
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.