Loading ...
Sorry, an error occurred while loading the content.

Re: [z_scale] Handlaid track

Expand Messages
  • Jay & Anne Greer
    Hi Roy, Naptha or Lighter Fluid and an old tooth brush will disolove wax based flux. These fluids are also better than alcohol when used with the rag and
    Message 1 of 1 , Mar 13, 2000
    • 0 Attachment
      Hi Roy,
      Naptha or Lighter Fluid and an old tooth brush will disolove wax based flux.
      These fluids are also better than alcohol when used with the rag and finger
      technique for cleaning track.
      Jay Greer/ Der Wegmann

      > From: "Roy Stevens" <riogrande5771@...>
      > Reply-To: z_scale@onelist.com
      > Date: Fri, 03 Mar 2000 00:38:59 GMT
      > To: z_scale@onelist.com
      > Subject: Re: [z_scale] Handlaid track
      >
      > From: "Roy Stevens" <riogrande5771@...>
      >
      > To anyone soldering ANY model, I highly recommend finding a water-soluable
      > flux. Micro-Mark sells flux that can be washed off with water for $4.00
      > Regular flux, especially when used to lay track can work its way to the
      > flanges and wheels, and is VERY hard to clean off. Flux is very important
      > for laying track, since it helps the solder bond without having to heat the
      > rail very much.
      > ______________________________________________________
      > Get Your Private, Free Email at http://www.hotmail.com
      >
      >
      > ------------------------------------------------------------------------
      > MAXIMIZE YOUR CARD, MINIMIZE YOUR RATE!
      > Get a NextCard Visa, in 30 seconds! Get rates as low as
      > 0.0% Intro or 9.9% Fixed APR and no hidden fees.
      > Apply NOW!
      > http://click.egroups.com/1/2122/0/_/560875/_/952043980/
      > ------------------------------------------------------------------------
      >
      > CraZy 'bout Zee!
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.