8154Re: [z_scale] M.T. F7's
- Jan 1, 2002John:
> My problem is that need advice on how to get the Micro TrainsThere was a recent exchange on this list that taught me a few tricks on the
> F7's to run smooth. Over the last couple of years I have owned 3,
> and not one of them is a good runner. The are rough running and buck
> and rock down the track.
MT F7's: good and bad axles (and attached gears).
It would appear (from a former MT employee on the list) that "most all" F7's
have "good axles." Now don't ask me what that means, because it was not
explained on the list. But I can tell you that you have "good" axles if you
can freely interchange the axles in the trucks, and the direction they run in.
"Some" axles are "not so good," again, whatever that means. I've had several
of those kinds of locos sent to me in plastic zip lock bags over the last
year, when the owners flat gave up.
However, in every case, they ran as smooth as sewing machines after taking
the time to find out which axle goes in which truck and in which direction.
Yes, its a real pain, assembling, testing, and disassembling until you find
the "perfect place" for each axle. Set aside an hour to "play the placement
game." The results are worth it.
I also learned from the list that its a really bad thing to mix up the worms
and 1st gears after they leave the factory. I've never tried mixing them,
due to the way I take them apart and lay them out on the workbench. But I'll
gladly take the author's word on that topic.
I'm of the opinion that rather than discover if you have "good" or "bad"
axles the hard way, the proper way is to clearly lay them out on the table as
you take them apart, and assemble everything exactly the way you found it
(left/right, truck slot, etc.). Then you will never know which one you
happen to have.
Also use the search engine on this list to find a step by step electrical
shake down I wrote a few weeks back.
If you are at your wit's end on your F7(s), contact me off list, and I'll do
the same no-charge repairs for you.
Anyone else have any ideas to share?
- << Previous post in topic