Loading ...
Sorry, an error occurred while loading the content.

72604Re: [Z_Scale] Re: Track crossing question

Expand Messages
  • Eddie Hen
    Apr 2, 2013
      Ok folks,
       I could not get AnyRail to save the layout in .jpg form, so I took a picture of it
      with my cell phone and uploaded it into the file section, 'Marklin_81865_set_2_loops_layout.jpg'.
      For those who have not used AnyRail, there is a free version out there. You are limited in
      what you can do with it (the free version), but hey,for a begginer like me, it is very helpful.
      Ok, now the laughter (or 'what a novice comments') can begin and Jonathon, as far as the engine going
       into a bar.... it's a German engine, so it must be going into a pub ;)


      From: mark2playz <mark.markham@...>
      To: z_scale@yahoogroups.com
      Sent: Monday, April 1, 2013 11:50 AM
      Subject: [Z_Scale] Re: Track crossing question


      For those of us you don't have Anyrail, you might want to upload a jpeg version. BTW I rarely laugh at any layout.

      --- In mailto:z_scale%40yahoogroups.com, Eddie Hen <southridge90@...> wrote:
      > Thanks for the advice Mark. I have uploaded the track layout in the file section named Marklin
      > _81865_set_2_ Loops_Layout.any . If you have time, please
      > take a look at it. You might even get a good laugh at what I'm trying to do........
      > _______________________________
      > From: mark2playz <mark.markham@...>
      > To: mailto:z_scale%40yahoogroups.com
      > Sent: Saturday, March 30, 2013 10:31 PM
      > Subject: [Z_Scale] Track crossing question
      > Eddie,
      > Welcome to Z. Here's some thoughts on you track crossing question.
      > If you consider a clearance for an over/under crossing is 1 1/4" you could consider a 4% grade, you could do the grade in about 32".
      > The 90-degree crossing is unique to Rokuhan. You should be able to connect the Marklin track to the Rokuhan crossing using the Rokuhan A014 track adapter.
      > Hope this helps,
      > Mark

      [Non-text portions of this message have been removed]
    • Show all 38 messages in this topic