Loading ...
Sorry, an error occurred while loading the content.

69781Re: [Z_Scale] Re: My first layout

Expand Messages
  • Loren Snyder
    Mar 4, 2012
    • 0 Attachment
      I did basically the same thing when I built the display layout for MTL. I
      did not have to worry about the width when gluing the pieces down as no
      scenery or edge restrictions were preventing me from gluing the entire
      surface down with yellow glue to the pink foam base. Once the glue had
      dried, I used a hot foam knife to slice down the middle of the risers to the
      width I wanted and then just popped off the pieces I did not want. And yes,
      the puzzle pieces promptly went into the trash can.

      New modelers will quickly find that there is a certain amount of 'throw away
      in any building project. Of course, the less the better as I hate to undo
      some work only to throw it away or do over some aspect I wasn't initially
      happy with.

      -------Original Message-------

      From: Uwe Liermann
      Date: 3/4/2012 7:32:34 AM
      To: z_scale@yahoogroups.com
      Subject: Re: [Z_Scale] Re: My first layout

      > HOW do you cut them in half? Since they are zig-zag strips I find
      when they are cut in half you end up with a shopping cart full of puzzle

      just glue them on the base with only the half that you intend to use, an
      then cut of the excess. Then you have only half a shopping cart full of
      puzzle pieces.



      [Non-text portions of this message have been removed]
    • Show all 17 messages in this topic