Loading ...
Sorry, an error occurred while loading the content.

64918Re: soldering

Expand Messages
  • Glenn and Sandy
    Jun 1, 2010
    • 0 Attachment
      We want to thank Ed Turner and Garth Hamilton for recommending us to help Ray Kuhn with his soldering. Our Email address has changed to stiska@...
      Please let us know if we can be of help to you.

      Best regards,
      Glenn and Sandy Stiska
      1045 Porter Drive
      Largo, Fl 33771
      email: stiska@...
      727-535-3819

      --- In z_scale@yahoogroups.com, Rainer Kuhn <rayas911@...> wrote:
      >
      > Thanks Ed,
      > 'l' ll try them.
      >
      > Would you believe I was just there (Largo)last week
      >
      > Thanx again
      >
      > Ray
      >
      > ________________________________
      > From: Ed Turner <eit30@...>
      > To: z_scale@yahoogroups.com
      > Sent: Tue, June 1, 2010 12:21:40 PM
      > Subject: Re: [Z_Scale] Re: soldering
      >
      >
      > Hi Ray,
      >
      > The Stiskas do excellent work. You will not be disappointed.
      >
      > ________________________________
      > From: Garth <garth.a.hamilton@...>
      > To: z_scale@yahoogroups.com
      > Sent: Tue, June 1, 2010 3:01:17 PM
      > Subject: [Z_Scale] Re: soldering
      >
      >
      > These people should be able to assist you in any repairs you need. They come very highly recommended by many members of the group.
      > This information was found in the files section under store fronts.
      >
      > cheerz Garth
      >
      > Glenn and Sandy Stiska
      > 1045 Porter Drive
      > Largo, FL 33771-1229
      >
      > stiska@...
      > Telephone: [727] 535-3819
      >
      > --- In z_scale@yahoogroups.com, Rainer Kuhn <rayas911@> wrote:
      > >
      > > Hello everybody,
      > >
      > > I just discovered your website and decided to become a member. Please let me introduce myself.
      > >
      > > My name is Rainer (Ray) Kuhn and I reside on Long Island, NY. I am retired and want to take up my hobby (which I started in the 90' and for which I have limited knowledge) again. I do however, have a large collection of engines and rolling stock which had been stored for the last 10 or so years. As it turned out approx 90% of all engines were "frozen" and it took a lot of time and patience to get them back to excellent running conditions. Unfortunately I had did have a few "casualties". The wires leading to the light bulb assembly broke off on the following engines: 2 # E 94 (Marklin # 8822) and 1 # Be 6/8 Swiss Crocodile.
      > > My soldering gun seems much to big for such a microscopic job beside I am not good at it.
      > > I am wondering if you have any recommendation as to who could do such repairs.
      > >
      > > Thank you for your help.
      > >
      > > Ray
      > > Rayas911at yahoo.com
    • Show all 11 messages in this topic