Loading ...
Sorry, an error occurred while loading the content.

64917Re: [Z_Scale] Re: soldering

Expand Messages
  • Rainer Kuhn
    Jun 1, 2010
    • 0 Attachment
      Hey Garth

      I'll try them.
      Thanks for your help
      RK





      ________________________________
      From: Garth <garth.a.hamilton@...>
      To: z_scale@yahoogroups.com
      Sent: Tue, June 1, 2010 12:01:17 PM
      Subject: [Z_Scale] Re: soldering


      These people should be able to assist you in any repairs you need. They come very highly recommended by many members of the group.
      This information was found in the files section under store fronts.

      cheerz Garth

      Glenn and Sandy Stiska
      1045 Porter Drive
      Largo, FL 33771-1229

      stiska@...
      Telephone: [727] 535-3819

      --- In z_scale@yahoogroups.com, Rainer Kuhn <rayas911@...> wrote:
      >
      > Hello everybody,
      >
      > I just discovered your website and decided to become a member. Please let me introduce myself.
      >
      > My name is Rainer (Ray) Kuhn and I reside on Long Island, NY. I am retired and want to take up my hobby (which I started in the 90' and for which I have limited knowledge) again. I do however, have a large collection of engines and rolling stock which had been stored for the last 10 or so years. As it turned out approx 90% of all engines were "frozen" and it took a lot of time and patience to get them back to excellent running conditions. Unfortunately I had did have a few "casualties". The wires leading to the light bulb assembly broke off on the following engines: 2 # E 94 (Marklin # 8822) and 1 # Be 6/8 Swiss Crocodile.
      > My soldering gun seems much to big for such a microscopic job beside I am not good at it.
      > I am wondering if you have any recommendation as to who could do such repairs.
      >
      > Thank you for your help.
      >
      > Ray
      > Rayas911at yahoo.com
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >







      [Non-text portions of this message have been removed]
    • Show all 11 messages in this topic