Loading ...
Sorry, an error occurred while loading the content.

63877Re: Fastening MTL MicroTrack to luan plywood top

Expand Messages
  • David K. Smith
    Nov 29, 2009
    • 0 Attachment
      Just about any caulk-like product will do well to hold down sectional Micro-Track. The advantage is that the track can be removed later with a razor blade or hobby knife. Liquid Nails (the normal construction formula) has solvents that can attack the plastic of the track, so you'd do better to choose the "foam friendly" version. Still, I'd opt for plain ordinary caulk--the cheapest will do as well as any other.


      --- In z_scale@yahoogroups.com, "Lindley Ruddick" <elruddick@...> wrote:
      > I was not very clear. I was referring to the sectional MTL MicroTrack, not
      > flex track.
      > Lindley
      > -----Original Message-----
      > From: z_scale@yahoogroups.com [mailto:z_scale@yahoogroups.com]On Behalf Of
      > Don Avila
      > Sent: Sunday, November 29, 2009 10:00 AM
      > To: z_scale@yahoogroups.com
      > Subject: [Z_Scale] Fastening MTL MicroTrack to luan plywood top
      > I have NOT tried Luan - BUT I do use "Liquid Nails" in the red color tube.
      > I have not found anything it will not stick to. Spread a thin coat and then
      > put the track down with some weight to hold it in place. Wait about 30
      > minutes and move on, I never do more than a foot to 18" at a time although
      > there is no reason why you couldn't do more PROVIDED you get the track down
      > very promptly after the glue is spread. Spread it fairly thinly so large
      > amounts of glue don't ooze up between the ties.
      > --
      > ...don a, Northern Ohio, USA
      > [Non-text portions of this message have been removed]
      > [Non-text portions of this message have been removed]
    • Show all 18 messages in this topic