61466Re: Amperage Draw
- May 1, 2009To measure AMPERAGE, you must 'break' the circuit.. remove one wire from the power pack and connect it to one lead of the meter, connect the other meter lead directly to powerpack.
To measure VOLTAGE, you would simply touch the leads onto the two contacts of the powerpack, or one lead to each rail.
For a picture, see http://www.stonysmith.com/railroad/va.gif
> He said one end should be connected to the two wires coming from the output power from the controller, and the other end two wires be connected to the track.
- << Previous post in topic Next post in topic >>