Loading ...
Sorry, an error occurred while loading the content.

Re: Variables template min-max weather data

Expand Messages
  • wuhu_software
    Dimitris, Before following the below, hit Stop on WUHU so that it is not attempting to process templates while you are making changes. Since you are wanting to
    Message 1 of 11 , Sep 7, 2007
    • 0 Attachment
      Dimitris,

      Before following the below, hit Stop on WUHU so that it is not
      attempting to process templates while you are making changes.

      Since you are wanting to process multiple template files, I would
      recommend creating an action file. Action files allow you to process
      multiple templates and other commands, one per line.

      To use an action file, would would enter the following line in to the
      action on activation:

      actionfile:"C:\ActionList.txt"

      Open notepad. Enter the following lines:

      template:"D:\inputzwntana.txt" "D:\zwntana.txt"
      template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"

      Save this file to C:\ActionList.txt

      Create a new Notepad file, enter the following:

      %[daily_extremes]low_outdoor_temperature_deg_C%
      %[daily_extremes]high_outdoor_temperature_deg_C%
      %[daily_extremes]low_outdoor_humidity%
      %[daily_extremes]high_outdoor_humidity%
      %[daily_extremes]low_outdoor_dewpoint_deg_C%
      %[daily_extremes]high_outdoor_dewpoint_deg_C%
      %[daily_extremes]low_outdoor_relative_pressure_hpa%
      %[daily_extremes]high_outdoor_relative_pressure_hpa%

      Save this file to C:\mynewtemplate.txt

      Press start on WUHU to resume processing.

      After an update, the following files should be created:

      D:\zwntana.txt
      D:\mynewtemplateoutput.txt


      --- In wuhu_software_group@yahoogroups.com, "petros0022"
      <petros0022@...> wrote:
      >
      > Yes WUHU author nad thank you
      >
      > Do you make for me a template like this for max-min
      > temperature,humidity,wind,dew point,barometer ,pressure ??
      > And tell me please what to do step by step : i think Alert action --
      >
      > WUHU operation alarm Action -->mark on weather up date --> press
      > sound action -->and action and activation i put like it
      > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct or
      > no ??.
      >
      > Thank you
      > Dimitris from Greece
      > http://www.geocities.com/meteo19671967
      >
      >
      >
      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > <wuhu_software@> wrote:
      > >
      > > Dimitris,
      > >
      > > Are you talking about the extended currdat.lst template variables
      > like:
      > >
      > > %[daily_extremes]low_outdoor_temperature_deg_C%
      > > %[daily_extremes]high_outdoor_temperature_deg_C%
      > >
      > > and so on?
      > >
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
      > > <petros0022@> wrote:
      > > >
      > > > Hello from Greece
      > > > I like to ask you ,i can to make a temblate variables about min-
      > max
      > > > weather data every day , temperature-humidity-pressure-wind-dew
      > point-
      > > > barometer ?
      > > > And if yes how is the way ?
      > > >
      > > > Thank you
      > > > Dimitris from Greece
      > > > http://www.geocities.com/meteo19671967
      > > >
      > >
      >
    • wuhu_software
      Dimitris, I forgot to include the low/high wind speed in the new template. Here is a list of all of the daily extremes available for use in the new template:
      Message 2 of 11 , Sep 7, 2007
      • 0 Attachment
        Dimitris,

        I forgot to include the low/high wind speed in the new template.

        Here is a list of all of the daily extremes available for use in the
        new template:

        %[daily_extremes]low_outdoor_temperature_time%
        %[daily_extremes]low_outdoor_temperature_time_hms%
        %[daily_extremes]low_outdoor_temperature_deg_C%
        %[daily_extremes]low_outdoor_temperature_deg_F%
        %[daily_extremes]high_outdoor_temperature_time%
        %[daily_extremes]high_outdoor_temperature_time_hms%
        %[daily_extremes]high_outdoor_temperature_deg_C%
        %[daily_extremes]high_outdoor_temperature_deg_F%
        %[daily_extremes]low_outdoor_humidity_time%
        %[daily_extremes]low_outdoor_humidity_time_hms%
        %[daily_extremes]low_outdoor_humidity%
        %[daily_extremes]high_outdoor_humidity_time%
        %[daily_extremes]high_outdoor_humidity_time_hms%
        %[daily_extremes]high_outdoor_humidity%
        %[daily_extremes]low_outdoor_dewpoint_time%
        %[daily_extremes]low_outdoor_dewpoint_time_hms%
        %[daily_extremes]low_outdoor_dewpoint_deg_C%
        %[daily_extremes]low_outdoor_dewpoint_deg_F%
        %[daily_extremes]high_outdoor_dewpoint_time%
        %[daily_extremes]high_outdoor_dewpoint_time_hms%
        %[daily_extremes]high_outdoor_dewpoint_deg_C%
        %[daily_extremes]high_outdoor_dewpoint_deg_F%
        %[daily_extremes]low_outdoor_windchill_time%
        %[daily_extremes]low_outdoor_windchill_time_hms%
        %[daily_extremes]low_outdoor_windchill_deg_C%
        %[daily_extremes]low_outdoor_windchill_deg_F%
        %[daily_extremes]high_outdoor_windchill_time%
        %[daily_extremes]high_outdoor_windchill_time_hms%
        %[daily_extremes]high_outdoor_windchill_deg_C%
        %[daily_extremes]high_outdoor_windchill_deg_F%
        %[daily_extremes]low_outdoor_wind_direction_time%
        %[daily_extremes]low_outdoor_wind_direction_time_hms%
        %[daily_extremes]low_outdoor_wind_direction%
        %[daily_extremes]low_outdoor_wind_direction_letters%
        %[daily_extremes]high_outdoor_wind_direction_time%
        %[daily_extremes]high_outdoor_wind_direction_time_hms%
        %[daily_extremes]high_outdoor_wind_direction%
        %[daily_extremes]high_outdoor_wind_direction_letters%
        %[daily_extremes]low_outdoor_wind_speed_time%
        %[daily_extremes]low_outdoor_wind_speed_time_hms%
        %[daily_extremes]low_outdoor_wind_speed_kmh%
        %[daily_extremes]low_outdoor_wind_speed_mph%
        %[daily_extremes]high_outdoor_wind_speed_time%
        %[daily_extremes]high_outdoor_wind_speed_time_hms%
        %[daily_extremes]high_outdoor_wind_speed_kmh%
        %[daily_extremes]high_outdoor_wind_speed_mph%
        %[daily_extremes]low_outdoor_wind_gust_time%
        %[daily_extremes]low_outdoor_wind_gust_time_hms%
        %[daily_extremes]low_outdoor_wind_gust_kmh%
        %[daily_extremes]low_outdoor_wind_gust_mph%
        %[daily_extremes]high_outdoor_wind_gust_time%
        %[daily_extremes]high_outdoor_wind_gust_time_hms%
        %[daily_extremes]high_outdoor_wind_gust_kmh%
        %[daily_extremes]high_outdoor_wind_gust_mph%
        %[daily_extremes]low_outdoor_average_wind_speed_time%
        %[daily_extremes]low_outdoor_average_wind_speed_time_hms%
        %[daily_extremes]low_outdoor_average_wind_speed_kmh%
        %[daily_extremes]low_outdoor_average_wind_speed_mph%
        %[daily_extremes]high_outdoor_average_wind_speed_time%
        %[daily_extremes]high_outdoor_average_wind_speed_time_hms%
        %[daily_extremes]high_outdoor_average_wind_speed_kmh%
        %[daily_extremes]high_outdoor_average_wind_speed_mph%
        %[daily_extremes]low_outdoor_relative_pressure_time%
        %[daily_extremes]low_outdoor_relative_pressure_time_hms%
        %[daily_extremes]low_outdoor_relative_pressure_hpa%
        %[daily_extremes]low_outdoor_relative_pressure_inHg%
        %[daily_extremes]high_outdoor_relative_pressure_time%
        %[daily_extremes]high_outdoor_relative_pressure_time_hms%
        %[daily_extremes]high_outdoor_relative_pressure_hpa%
        %[daily_extremes]high_outdoor_relative_pressure_inHg%
        %[daily_extremes]low_outdoor_absolute_pressure_time%
        %[daily_extremes]low_outdoor_absolute_pressure_time_hms%
        %[daily_extremes]low_outdoor_absolute_pressure_hpa%
        %[daily_extremes]low_outdoor_absolute_pressure_inHg%
        %[daily_extremes]high_outdoor_absolute_pressure_time%
        %[daily_extremes]high_outdoor_absolute_pressure_time_hms%
        %[daily_extremes]high_outdoor_absolute_pressure_hpa%
        %[daily_extremes]high_outdoor_absolute_pressure_inHg%
        %[daily_extremes]low_outdoor_rain1hr_time%
        %[daily_extremes]low_outdoor_rain1hr_time_hms%
        %[daily_extremes]low_outdoor_rain1hr_mm%
        %[daily_extremes]low_outdoor_rain1hr_inch%
        %[daily_extremes]high_outdoor_rain1hr_time%
        %[daily_extremes]high_outdoor_rain1hr_time_hms%
        %[daily_extremes]high_outdoor_rain1hr_mm%
        %[daily_extremes]high_outdoor_rain1hr_inch%
        %[daily_extremes]low_outdoor_rain24hr_time%
        %[daily_extremes]low_outdoor_rain24hr_time_hms%
        %[daily_extremes]low_outdoor_rain24hr_mm%
        %[daily_extremes]low_outdoor_rain24hr_inch%
        %[daily_extremes]high_outdoor_rain24hr_time%
        %[daily_extremes]high_outdoor_rain24hr_time_hms%
        %[daily_extremes]high_outdoor_rain24hr_mm%
        %[daily_extremes]high_outdoor_rain24hr_inch%
        %[daily_extremes]low_outdoor_rain_daily_total_time%
        %[daily_extremes]low_outdoor_rain_daily_total_time_hms%
        %[daily_extremes]low_outdoor_rain_daily_total_mm%
        %[daily_extremes]low_outdoor_rain_daily_total_inch%
        %[daily_extremes]high_outdoor_rain_daily_total_time%
        %[daily_extremes]high_outdoor_rain_daily_total_time_hms%
        %[daily_extremes]high_outdoor_rain_daily_total_mm%
        %[daily_extremes]high_outdoor_rain_daily_total_inch%
        %[daily_extremes]low_outdoor_rain_total_time%
        %[daily_extremes]low_outdoor_rain_total_time_hms%
        %[daily_extremes]low_outdoor_rain_total_mm%
        %[daily_extremes]low_outdoor_rain_total_inch%
        %[daily_extremes]high_outdoor_rain_total_time%
        %[daily_extremes]high_outdoor_rain_total_time_hms%
        %[daily_extremes]high_outdoor_rain_total_mm%
        %[daily_extremes]high_outdoor_rain_total_inch%
        %[daily_extremes]low_indoor_temperature_time%
        %[daily_extremes]low_indoor_temperature_time_hms%
        %[daily_extremes]low_indoor_temperature_deg_C%
        %[daily_extremes]low_indoor_temperature_deg_F%
        %[daily_extremes]high_indoor_temperature_time%
        %[daily_extremes]high_indoor_temperature_time_hms%
        %[daily_extremes]high_indoor_temperature_deg_C%
        %[daily_extremes]high_indoor_temperature_deg_F%
        %[daily_extremes]low_indoor_humidity_time%
        %[daily_extremes]low_indoor_humidity_time_hms%
        %[daily_extremes]low_indoor_humidity%
        %[daily_extremes]high_indoor_humidity_time%
        %[daily_extremes]high_indoor_humidity_time_hms%
        %[daily_extremes]high_indoor_humidity%



        --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        <wuhu_software@...> wrote:
        >
        > Dimitris,
        >
        > Before following the below, hit Stop on WUHU so that it is not
        > attempting to process templates while you are making changes.
        >
        > Since you are wanting to process multiple template files, I would
        > recommend creating an action file. Action files allow you to
        process
        > multiple templates and other commands, one per line.
        >
        > To use an action file, would would enter the following line in to
        the
        > action on activation:
        >
        > actionfile:"C:\ActionList.txt"
        >
        > Open notepad. Enter the following lines:
        >
        > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
        > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
        >
        > Save this file to C:\ActionList.txt
        >
        > Create a new Notepad file, enter the following:
        >
        > %[daily_extremes]low_outdoor_temperature_deg_C%
        > %[daily_extremes]high_outdoor_temperature_deg_C%
        > %[daily_extremes]low_outdoor_humidity%
        > %[daily_extremes]high_outdoor_humidity%
        > %[daily_extremes]low_outdoor_dewpoint_deg_C%
        > %[daily_extremes]high_outdoor_dewpoint_deg_C%
        > %[daily_extremes]low_outdoor_relative_pressure_hpa%
        > %[daily_extremes]high_outdoor_relative_pressure_hpa%
        >
        > Save this file to C:\mynewtemplate.txt
        >
        > Press start on WUHU to resume processing.
        >
        > After an update, the following files should be created:
        >
        > D:\zwntana.txt
        > D:\mynewtemplateoutput.txt
        >
        >
        > --- In wuhu_software_group@yahoogroups.com, "petros0022"
        > <petros0022@> wrote:
        > >
        > > Yes WUHU author nad thank you
        > >
        > > Do you make for me a template like this for max-min
        > > temperature,humidity,wind,dew point,barometer ,pressure ??
        > > And tell me please what to do step by step : i think Alert
        action --
        > >
        > > WUHU operation alarm Action -->mark on weather up date --> press
        > > sound action -->and action and activation i put like it
        > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct
        or
        > > no ??.
        > >
        > > Thank you
        > > Dimitris from Greece
        > > http://www.geocities.com/meteo19671967
        > >
        > >
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        > > <wuhu_software@> wrote:
        > > >
        > > > Dimitris,
        > > >
        > > > Are you talking about the extended currdat.lst template
        variables
        > > like:
        > > >
        > > > %[daily_extremes]low_outdoor_temperature_deg_C%
        > > > %[daily_extremes]high_outdoor_temperature_deg_C%
        > > >
        > > > and so on?
        > > >
        > > >
        > > >
        > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
        > > > <petros0022@> wrote:
        > > > >
        > > > > Hello from Greece
        > > > > I like to ask you ,i can to make a temblate variables about
        min-
        > > max
        > > > > weather data every day , temperature-humidity-pressure-wind-
        dew
        > > point-
        > > > > barometer ?
        > > > > And if yes how is the way ?
        > > > >
        > > > > Thank you
        > > > > Dimitris from Greece
        > > > > http://www.geocities.com/meteo19671967
        > > > >
        > > >
        > >
        >
      • petros0022
        Thank you WUHU i will try it i put and wind at km/h is corect ??i see variables have %time% and time_hms what is hms ,and i put and time it time it was styl
        Message 3 of 11 , Sep 7, 2007
        • 0 Attachment
          Thank you WUHU i will try it

          i put and wind at km/h is corect ??i see variables have %time% and
          time_hms what is hms ,and i put and time it time it was styl
          12:30 ???

          I see for it i must to go from another way and no like before like
          zwntana.txt file .

          %[daily_extremes]low_outdoor_temperature_deg_C%
          %[daily_extremes]high_outdoor_temperature_deg_C%
          %[daily_extremes]low_outdoor_humidity%
          %[daily_extremes]high_outdoor_humidity%
          %[daily_extremes]low_outdoor_dewpoint_deg_C%
          %[daily_extremes]high_outdoor_dewpoint_deg_C%
          %[daily_extremes]low_outdoor_relative_pressure_hpa%
          %[daily_extremes]high_outdoor_relative_pressure_hpa%
          %[daily_extremes]low_outdoor_wind_speed_km/h%
          %[daily_extremes]high_outdoor_wind_speed_km/h%

          Thank you
          Dimitris


          --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
          <wuhu_software@...> wrote:
          >
          > Dimitris,
          >
          > Before following the below, hit Stop on WUHU so that it is not
          > attempting to process templates while you are making changes.
          >
          > Since you are wanting to process multiple template files, I would
          > recommend creating an action file. Action files allow you to
          process
          > multiple templates and other commands, one per line.
          >
          > To use an action file, would would enter the following line in to
          the
          > action on activation:
          >
          > actionfile:"C:\ActionList.txt"
          >
          > Open notepad. Enter the following lines:
          >
          > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
          > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
          >
          > Save this file to C:\ActionList.txt
          >
          > Create a new Notepad file, enter the following:
          >
          > %[daily_extremes]low_outdoor_temperature_deg_C%
          > %[daily_extremes]high_outdoor_temperature_deg_C%
          > %[daily_extremes]low_outdoor_humidity%
          > %[daily_extremes]high_outdoor_humidity%
          > %[daily_extremes]low_outdoor_dewpoint_deg_C%
          > %[daily_extremes]high_outdoor_dewpoint_deg_C%
          > %[daily_extremes]low_outdoor_relative_pressure_hpa%
          > %[daily_extremes]high_outdoor_relative_pressure_hpa%
          >
          > Save this file to C:\mynewtemplate.txt
          >
          > Press start on WUHU to resume processing.
          >
          > After an update, the following files should be created:
          >
          > D:\zwntana.txt
          > D:\mynewtemplateoutput.txt
          >
          >
          > --- In wuhu_software_group@yahoogroups.com, "petros0022"
          > <petros0022@> wrote:
          > >
          > > Yes WUHU author nad thank you
          > >
          > > Do you make for me a template like this for max-min
          > > temperature,humidity,wind,dew point,barometer ,pressure ??
          > > And tell me please what to do step by step : i think Alert
          action --
          > >
          > > WUHU operation alarm Action -->mark on weather up date --> press
          > > sound action -->and action and activation i put like it
          > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct
          or
          > > no ??.
          > >
          > > Thank you
          > > Dimitris from Greece
          > > http://www.geocities.com/meteo19671967
          > >
          > >
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
          > > <wuhu_software@> wrote:
          > > >
          > > > Dimitris,
          > > >
          > > > Are you talking about the extended currdat.lst template
          variables
          > > like:
          > > >
          > > > %[daily_extremes]low_outdoor_temperature_deg_C%
          > > > %[daily_extremes]high_outdoor_temperature_deg_C%
          > > >
          > > > and so on?
          > > >
          > > >
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
          > > > <petros0022@> wrote:
          > > > >
          > > > > Hello from Greece
          > > > > I like to ask you ,i can to make a temblate variables about
          min-
          > > max
          > > > > weather data every day , temperature-humidity-pressure-wind-
          dew
          > > point-
          > > > > barometer ?
          > > > > And if yes how is the way ?
          > > > >
          > > > > Thank you
          > > > > Dimitris from Greece
          > > > > http://www.geocities.com/meteo19671967
          > > > >
          > > >
          > >
          >
        • wuhu_software
          _time variables contain AM/PM, hh:mm:ss AM/PM _time_hms variables are the 24 hour format: hh:mm:ss ... press ... correct
          Message 4 of 11 , Sep 7, 2007
          • 0 Attachment
            _time variables contain AM/PM, hh:mm:ss AM/PM

            _time_hms variables are the 24 hour format: hh:mm:ss


            --- In wuhu_software_group@yahoogroups.com, "petros0022"
            <petros0022@...> wrote:
            >
            > Thank you WUHU i will try it
            >
            > i put and wind at km/h is corect ??i see variables have %time% and
            > time_hms what is hms ,and i put and time it time it was styl
            > 12:30 ???
            >
            > I see for it i must to go from another way and no like before like
            > zwntana.txt file .
            >
            > %[daily_extremes]low_outdoor_temperature_deg_C%
            > %[daily_extremes]high_outdoor_temperature_deg_C%
            > %[daily_extremes]low_outdoor_humidity%
            > %[daily_extremes]high_outdoor_humidity%
            > %[daily_extremes]low_outdoor_dewpoint_deg_C%
            > %[daily_extremes]high_outdoor_dewpoint_deg_C%
            > %[daily_extremes]low_outdoor_relative_pressure_hpa%
            > %[daily_extremes]high_outdoor_relative_pressure_hpa%
            > %[daily_extremes]low_outdoor_wind_speed_km/h%
            > %[daily_extremes]high_outdoor_wind_speed_km/h%
            >
            > Thank you
            > Dimitris
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            > <wuhu_software@> wrote:
            > >
            > > Dimitris,
            > >
            > > Before following the below, hit Stop on WUHU so that it is not
            > > attempting to process templates while you are making changes.
            > >
            > > Since you are wanting to process multiple template files, I would
            > > recommend creating an action file. Action files allow you to
            > process
            > > multiple templates and other commands, one per line.
            > >
            > > To use an action file, would would enter the following line in to
            > the
            > > action on activation:
            > >
            > > actionfile:"C:\ActionList.txt"
            > >
            > > Open notepad. Enter the following lines:
            > >
            > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
            > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
            > >
            > > Save this file to C:\ActionList.txt
            > >
            > > Create a new Notepad file, enter the following:
            > >
            > > %[daily_extremes]low_outdoor_temperature_deg_C%
            > > %[daily_extremes]high_outdoor_temperature_deg_C%
            > > %[daily_extremes]low_outdoor_humidity%
            > > %[daily_extremes]high_outdoor_humidity%
            > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
            > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
            > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
            > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
            > >
            > > Save this file to C:\mynewtemplate.txt
            > >
            > > Press start on WUHU to resume processing.
            > >
            > > After an update, the following files should be created:
            > >
            > > D:\zwntana.txt
            > > D:\mynewtemplateoutput.txt
            > >
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
            > > <petros0022@> wrote:
            > > >
            > > > Yes WUHU author nad thank you
            > > >
            > > > Do you make for me a template like this for max-min
            > > > temperature,humidity,wind,dew point,barometer ,pressure ??
            > > > And tell me please what to do step by step : i think Alert
            > action --
            > > >
            > > > WUHU operation alarm Action -->mark on weather up date -->
            press
            > > > sound action -->and action and activation i put like it
            > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
            correct
            > or
            > > > no ??.
            > > >
            > > > Thank you
            > > > Dimitris from Greece
            > > > http://www.geocities.com/meteo19671967
            > > >
            > > >
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            > > > <wuhu_software@> wrote:
            > > > >
            > > > > Dimitris,
            > > > >
            > > > > Are you talking about the extended currdat.lst template
            > variables
            > > > like:
            > > > >
            > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
            > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
            > > > >
            > > > > and so on?
            > > > >
            > > > >
            > > > >
            > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
            > > > > <petros0022@> wrote:
            > > > > >
            > > > > > Hello from Greece
            > > > > > I like to ask you ,i can to make a temblate variables about
            > min-
            > > > max
            > > > > > weather data every day , temperature-humidity-pressure-wind-
            > dew
            > > > point-
            > > > > > barometer ?
            > > > > > And if yes how is the way ?
            > > > > >
            > > > > > Thank you
            > > > > > Dimitris from Greece
            > > > > > http://www.geocities.com/meteo19671967
            > > > > >
            > > > >
            > > >
            > >
            >
          • petros0022
            WUHU author i do it, but i don not see anything in new file on notepad . I do this i do a new file D: ActionList.txt and I put inside this
            Message 5 of 11 , Sep 7, 2007
            • 0 Attachment
              WUHU author i do it, but i don not see anything in new file on
              notepad .

              I do this
              i do a new file D:\ActionList.txt and I put inside this
              template:"D:\inputzwntana.txt" "D:\zwntana.txt"
              template:"D:\minmax.txt" "D:\minmaxoutput.txt"

              ACTION and activation i put inside this
              actionfile:"D:\ActionList.txt"

              AND a file from notepad name "D:\minmaxoutput.txt"

              and i put inside this

              %[daily_extremes]low_outdoor_temperature_deg_C%
              %[daily_extremes]high_outdoor_temperature_deg_C%
              %[daily_extremes]low_outdoor_humidity%
              %[daily_extremes]high_outdoor_humidity%
              %[daily_extremes]low_outdoor_dewpoint_deg_C%
              %[daily_extremes]high_outdoor_dewpoint_deg_C%
              %[daily_extremes]low_outdoor_relative_pressure_hpa%
              %[daily_extremes]high_outdoor_relative_pressure_hpa%
              %[daily_extremes]low_outdoor_wind_speed_km/h%
              %[daily_extremes]high_outdoor_wind_speed_km/h%

              i see in D:/ disk a new notepad name minmaxoutput but it is empty it
              no wrriten inside nothing

              Where is my wrong ??

              Thank you Dimitris



              --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
              <wuhu_software@...> wrote:
              >
              > _time variables contain AM/PM, hh:mm:ss AM/PM
              >
              > _time_hms variables are the 24 hour format: hh:mm:ss
              >
              >
              > --- In wuhu_software_group@yahoogroups.com, "petros0022"
              > <petros0022@> wrote:
              > >
              > > Thank you WUHU i will try it
              > >
              > > i put and wind at km/h is corect ??i see variables have %time%
              and
              > > time_hms what is hms ,and i put and time it time it was styl
              > > 12:30 ???
              > >
              > > I see for it i must to go from another way and no like before
              like
              > > zwntana.txt file .
              > >
              > > %[daily_extremes]low_outdoor_temperature_deg_C%
              > > %[daily_extremes]high_outdoor_temperature_deg_C%
              > > %[daily_extremes]low_outdoor_humidity%
              > > %[daily_extremes]high_outdoor_humidity%
              > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
              > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
              > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
              > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
              > > %[daily_extremes]low_outdoor_wind_speed_km/h%
              > > %[daily_extremes]high_outdoor_wind_speed_km/h%
              > >
              > > Thank you
              > > Dimitris
              > >
              > >
              > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
              > > <wuhu_software@> wrote:
              > > >
              > > > Dimitris,
              > > >
              > > > Before following the below, hit Stop on WUHU so that it is not
              > > > attempting to process templates while you are making changes.
              > > >
              > > > Since you are wanting to process multiple template files, I
              would
              > > > recommend creating an action file. Action files allow you to
              > > process
              > > > multiple templates and other commands, one per line.
              > > >
              > > > To use an action file, would would enter the following line in
              to
              > > the
              > > > action on activation:
              > > >
              > > > actionfile:"C:\ActionList.txt"
              > > >
              > > > Open notepad. Enter the following lines:
              > > >
              > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
              > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
              > > >
              > > > Save this file to C:\ActionList.txt
              > > >
              > > > Create a new Notepad file, enter the following:
              > > >
              > > > %[daily_extremes]low_outdoor_temperature_deg_C%
              > > > %[daily_extremes]high_outdoor_temperature_deg_C%
              > > > %[daily_extremes]low_outdoor_humidity%
              > > > %[daily_extremes]high_outdoor_humidity%
              > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
              > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
              > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
              > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
              > > >
              > > > Save this file to C:\mynewtemplate.txt
              > > >
              > > > Press start on WUHU to resume processing.
              > > >
              > > > After an update, the following files should be created:
              > > >
              > > > D:\zwntana.txt
              > > > D:\mynewtemplateoutput.txt
              > > >
              > > >
              > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
              > > > <petros0022@> wrote:
              > > > >
              > > > > Yes WUHU author nad thank you
              > > > >
              > > > > Do you make for me a template like this for max-min
              > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
              > > > > And tell me please what to do step by step : i think Alert
              > > action --
              > > > >
              > > > > WUHU operation alarm Action -->mark on weather up date -->
              > press
              > > > > sound action -->and action and activation i put like it
              > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
              > correct
              > > or
              > > > > no ??.
              > > > >
              > > > > Thank you
              > > > > Dimitris from Greece
              > > > > http://www.geocities.com/meteo19671967
              > > > >
              > > > >
              > > > >
              > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
              > > > > <wuhu_software@> wrote:
              > > > > >
              > > > > > Dimitris,
              > > > > >
              > > > > > Are you talking about the extended currdat.lst template
              > > variables
              > > > > like:
              > > > > >
              > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
              > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
              > > > > >
              > > > > > and so on?
              > > > > >
              > > > > >
              > > > > >
              > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
              > > > > > <petros0022@> wrote:
              > > > > > >
              > > > > > > Hello from Greece
              > > > > > > I like to ask you ,i can to make a temblate variables
              about
              > > min-
              > > > > max
              > > > > > > weather data every day , temperature-humidity-pressure-
              wind-
              > > dew
              > > > > point-
              > > > > > > barometer ?
              > > > > > > And if yes how is the way ?
              > > > > > >
              > > > > > > Thank you
              > > > > > > Dimitris from Greece
              > > > > > > http://www.geocities.com/meteo19671967
              > > > > > >
              > > > > >
              > > > >
              > > >
              > >
              >
            • petros0022
              Ok WUHU author my is mistake i forget to mark wrriten extended data all is ok now thank you very much Dimitris from Greece
              Message 6 of 11 , Sep 7, 2007
              • 0 Attachment
                Ok WUHU author my is mistake i forget to mark wrriten extended
                data
                all is ok now thank you very much

                Dimitris from Greece
                http://www.geocities.com/meteo19671967





                --- In wuhu_software_group@yahoogroups.com, "petros0022"
                <petros0022@...> wrote:
                >
                > WUHU author i do it, but i don not see anything in new file on
                > notepad .
                >
                > I do this
                > i do a new file D:\ActionList.txt and I put inside this
                > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
                >
                > ACTION and activation i put inside this
                > actionfile:"D:\ActionList.txt"
                >
                > AND a file from notepad name "D:\minmaxoutput.txt"
                >
                > and i put inside this
                >
                > %[daily_extremes]low_outdoor_temperature_deg_C%
                > %[daily_extremes]high_outdoor_temperature_deg_C%
                > %[daily_extremes]low_outdoor_humidity%
                > %[daily_extremes]high_outdoor_humidity%
                > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                > %[daily_extremes]low_outdoor_wind_speed_km/h%
                > %[daily_extremes]high_outdoor_wind_speed_km/h%
                >
                > i see in D:/ disk a new notepad name minmaxoutput but it is empty
                it
                > no wrriten inside nothing
                >
                > Where is my wrong ??
                >
                > Thank you Dimitris
                >
                >
                >
                > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                > <wuhu_software@> wrote:
                > >
                > > _time variables contain AM/PM, hh:mm:ss AM/PM
                > >
                > > _time_hms variables are the 24 hour format: hh:mm:ss
                > >
                > >
                > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                > > <petros0022@> wrote:
                > > >
                > > > Thank you WUHU i will try it
                > > >
                > > > i put and wind at km/h is corect ??i see variables have %time%
                > and
                > > > time_hms what is hms ,and i put and time it time it was styl
                > > > 12:30 ???
                > > >
                > > > I see for it i must to go from another way and no like before
                > like
                > > > zwntana.txt file .
                > > >
                > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                > > > %[daily_extremes]low_outdoor_humidity%
                > > > %[daily_extremes]high_outdoor_humidity%
                > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                > > >
                > > > Thank you
                > > > Dimitris
                > > >
                > > >
                > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                > > > <wuhu_software@> wrote:
                > > > >
                > > > > Dimitris,
                > > > >
                > > > > Before following the below, hit Stop on WUHU so that it is
                not
                > > > > attempting to process templates while you are making changes.
                > > > >
                > > > > Since you are wanting to process multiple template files, I
                > would
                > > > > recommend creating an action file. Action files allow you to
                > > > process
                > > > > multiple templates and other commands, one per line.
                > > > >
                > > > > To use an action file, would would enter the following line
                in
                > to
                > > > the
                > > > > action on activation:
                > > > >
                > > > > actionfile:"C:\ActionList.txt"
                > > > >
                > > > > Open notepad. Enter the following lines:
                > > > >
                > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                > > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                > > > >
                > > > > Save this file to C:\ActionList.txt
                > > > >
                > > > > Create a new Notepad file, enter the following:
                > > > >
                > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                > > > > %[daily_extremes]low_outdoor_humidity%
                > > > > %[daily_extremes]high_outdoor_humidity%
                > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                > > > >
                > > > > Save this file to C:\mynewtemplate.txt
                > > > >
                > > > > Press start on WUHU to resume processing.
                > > > >
                > > > > After an update, the following files should be created:
                > > > >
                > > > > D:\zwntana.txt
                > > > > D:\mynewtemplateoutput.txt
                > > > >
                > > > >
                > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                > > > > <petros0022@> wrote:
                > > > > >
                > > > > > Yes WUHU author nad thank you
                > > > > >
                > > > > > Do you make for me a template like this for max-min
                > > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
                > > > > > And tell me please what to do step by step : i think Alert
                > > > action --
                > > > > >
                > > > > > WUHU operation alarm Action -->mark on weather up date -->
                > > press
                > > > > > sound action -->and action and activation i put like it
                > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                > > correct
                > > > or
                > > > > > no ??.
                > > > > >
                > > > > > Thank you
                > > > > > Dimitris from Greece
                > > > > > http://www.geocities.com/meteo19671967
                > > > > >
                > > > > >
                > > > > >
                > > > > > --- In
                wuhu_software_group@yahoogroups.com, "wuhu_software"
                > > > > > <wuhu_software@> wrote:
                > > > > > >
                > > > > > > Dimitris,
                > > > > > >
                > > > > > > Are you talking about the extended currdat.lst template
                > > > variables
                > > > > > like:
                > > > > > >
                > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                > > > > > >
                > > > > > > and so on?
                > > > > > >
                > > > > > >
                > > > > > >
                > > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                > > > > > > <petros0022@> wrote:
                > > > > > > >
                > > > > > > > Hello from Greece
                > > > > > > > I like to ask you ,i can to make a temblate variables
                > about
                > > > min-
                > > > > > max
                > > > > > > > weather data every day , temperature-humidity-pressure-
                > wind-
                > > > dew
                > > > > > point-
                > > > > > > > barometer ?
                > > > > > > > And if yes how is the way ?
                > > > > > > >
                > > > > > > > Thank you
                > > > > > > > Dimitris from Greece
                > > > > > > > http://www.geocities.com/meteo19671967
                > > > > > > >
                > > > > > >
                > > > > >
                > > > >
                > > >
                > >
                >
              • wuhu_software
                ...a file from notepad name D: minmaxoutput.txt You want to put the contents in to D: minmax.txt rather than D: minmaxoutput.txt . D: minmax.txt is the
                Message 7 of 11 , Sep 7, 2007
                • 0 Attachment
                  "...a file from notepad name "D:\minmaxoutput.txt"

                  You want to put the contents in to "D:\minmax.txt" rather
                  than "D:\minmaxoutput.txt".

                  D:\minmax.txt is the input template file, D:\minmaxoutput.txt will be
                  the resulting output file.


                  --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  <petros0022@...> wrote:
                  >
                  > WUHU author i do it, but i don not see anything in new file on
                  > notepad .
                  >
                  > I do this
                  > i do a new file D:\ActionList.txt and I put inside this
                  > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                  > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
                  >
                  > ACTION and activation i put inside this
                  > actionfile:"D:\ActionList.txt"
                  >
                  > AND a file from notepad name "D:\minmaxoutput.txt"
                  >
                  > and i put inside this
                  >
                  > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > %[daily_extremes]low_outdoor_humidity%
                  > %[daily_extremes]high_outdoor_humidity%
                  > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                  > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                  > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                  > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                  > %[daily_extremes]low_outdoor_wind_speed_km/h%
                  > %[daily_extremes]high_outdoor_wind_speed_km/h%
                  >
                  > i see in D:/ disk a new notepad name minmaxoutput but it is empty
                  it
                  > no wrriten inside nothing
                  >
                  > Where is my wrong ??
                  >
                  > Thank you Dimitris
                  >
                  >
                  >
                  > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > <wuhu_software@> wrote:
                  > >
                  > > _time variables contain AM/PM, hh:mm:ss AM/PM
                  > >
                  > > _time_hms variables are the 24 hour format: hh:mm:ss
                  > >
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  > > <petros0022@> wrote:
                  > > >
                  > > > Thank you WUHU i will try it
                  > > >
                  > > > i put and wind at km/h is corect ??i see variables have %time%
                  > and
                  > > > time_hms what is hms ,and i put and time it time it was styl
                  > > > 12:30 ???
                  > > >
                  > > > I see for it i must to go from another way and no like before
                  > like
                  > > > zwntana.txt file .
                  > > >
                  > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > > > %[daily_extremes]low_outdoor_humidity%
                  > > > %[daily_extremes]high_outdoor_humidity%
                  > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                  > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                  > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                  > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                  > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                  > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                  > > >
                  > > > Thank you
                  > > > Dimitris
                  > > >
                  > > >
                  > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > > <wuhu_software@> wrote:
                  > > > >
                  > > > > Dimitris,
                  > > > >
                  > > > > Before following the below, hit Stop on WUHU so that it is
                  not
                  > > > > attempting to process templates while you are making changes.
                  > > > >
                  > > > > Since you are wanting to process multiple template files, I
                  > would
                  > > > > recommend creating an action file. Action files allow you to
                  > > > process
                  > > > > multiple templates and other commands, one per line.
                  > > > >
                  > > > > To use an action file, would would enter the following line
                  in
                  > to
                  > > > the
                  > > > > action on activation:
                  > > > >
                  > > > > actionfile:"C:\ActionList.txt"
                  > > > >
                  > > > > Open notepad. Enter the following lines:
                  > > > >
                  > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                  > > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                  > > > >
                  > > > > Save this file to C:\ActionList.txt
                  > > > >
                  > > > > Create a new Notepad file, enter the following:
                  > > > >
                  > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > > > > %[daily_extremes]low_outdoor_humidity%
                  > > > > %[daily_extremes]high_outdoor_humidity%
                  > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                  > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                  > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                  > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                  > > > >
                  > > > > Save this file to C:\mynewtemplate.txt
                  > > > >
                  > > > > Press start on WUHU to resume processing.
                  > > > >
                  > > > > After an update, the following files should be created:
                  > > > >
                  > > > > D:\zwntana.txt
                  > > > > D:\mynewtemplateoutput.txt
                  > > > >
                  > > > >
                  > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  > > > > <petros0022@> wrote:
                  > > > > >
                  > > > > > Yes WUHU author nad thank you
                  > > > > >
                  > > > > > Do you make for me a template like this for max-min
                  > > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
                  > > > > > And tell me please what to do step by step : i think Alert
                  > > > action --
                  > > > > >
                  > > > > > WUHU operation alarm Action -->mark on weather up date -->
                  > > press
                  > > > > > sound action -->and action and activation i put like it
                  > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                  > > correct
                  > > > or
                  > > > > > no ??.
                  > > > > >
                  > > > > > Thank you
                  > > > > > Dimitris from Greece
                  > > > > > http://www.geocities.com/meteo19671967
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > > > > <wuhu_software@> wrote:
                  > > > > > >
                  > > > > > > Dimitris,
                  > > > > > >
                  > > > > > > Are you talking about the extended currdat.lst template
                  > > > variables
                  > > > > > like:
                  > > > > > >
                  > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > > > > > >
                  > > > > > > and so on?
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  > > > > > > <petros0022@> wrote:
                  > > > > > > >
                  > > > > > > > Hello from Greece
                  > > > > > > > I like to ask you ,i can to make a temblate variables
                  > about
                  > > > min-
                  > > > > > max
                  > > > > > > > weather data every day , temperature-humidity-pressure-
                  > wind-
                  > > > dew
                  > > > > > point-
                  > > > > > > > barometer ?
                  > > > > > > > And if yes how is the way ?
                  > > > > > > >
                  > > > > > > > Thank you
                  > > > > > > > Dimitris from Greece
                  > > > > > > > http://www.geocities.com/meteo19671967
                  > > > > > > >
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                • petros0022
                  Yes WUHU author i do it and i forget to tell you this template is finaly %[daily_extremes]high_outdoor_temperature_deg_c%--
                  Message 8 of 11 , Sep 7, 2007
                  • 0 Attachment
                    Yes WUHU author i do it and i forget to tell you

                    this template is finaly

                    %[daily_extremes]high_outdoor_temperature_deg_c%--
                    %[daily_extremes]low_outdoor_temperature_deg_C%--
                    %[daily_extremes]high_outdoor_humidity%--
                    %[daily_extremes]low_outdoor_humidity%--
                    %[daily_extremes]high_outdoor_dewpoint_deg_C%--
                    %[daily_extremes]low_outdoor_dewpoint_deg_C%--
                    %[daily_extremes]high_outdoor_relative_pressure_hpa%--
                    %[daily_extremes]low_outdoor_relative_pressure_hpa%--
                    %[daily_extremes]high_outdoor_wind_gust_kmh%

                    I have a problem about clock but i do not interesting the clock

                    And here is my new data min-max

                    http://users.otenet.gr/~meteo/minmaxoutput.txt

                    A great thank you WUHU author

                    Dimitris from Greece
                    http://www.geocities.com/meteo19671967













                    --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    <wuhu_software@...> wrote:
                    >
                    >
                    > "...a file from notepad name "D:\minmaxoutput.txt"
                    >
                    > You want to put the contents in to "D:\minmax.txt" rather
                    > than "D:\minmaxoutput.txt".
                    >
                    > D:\minmax.txt is the input template file, D:\minmaxoutput.txt will
                    be
                    > the resulting output file.
                    >
                    >
                    > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    > <petros0022@> wrote:
                    > >
                    > > WUHU author i do it, but i don not see anything in new file on
                    > > notepad .
                    > >
                    > > I do this
                    > > i do a new file D:\ActionList.txt and I put inside this
                    > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                    > > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
                    > >
                    > > ACTION and activation i put inside this
                    > > actionfile:"D:\ActionList.txt"
                    > >
                    > > AND a file from notepad name "D:\minmaxoutput.txt"
                    > >
                    > > and i put inside this
                    > >
                    > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > %[daily_extremes]low_outdoor_humidity%
                    > > %[daily_extremes]high_outdoor_humidity%
                    > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                    > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                    > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                    > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                    > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                    > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                    > >
                    > > i see in D:/ disk a new notepad name minmaxoutput but it is
                    empty
                    > it
                    > > no wrriten inside nothing
                    > >
                    > > Where is my wrong ??
                    > >
                    > > Thank you Dimitris
                    > >
                    > >
                    > >
                    > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > <wuhu_software@> wrote:
                    > > >
                    > > > _time variables contain AM/PM, hh:mm:ss AM/PM
                    > > >
                    > > > _time_hms variables are the 24 hour format: hh:mm:ss
                    > > >
                    > > >
                    > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    > > > <petros0022@> wrote:
                    > > > >
                    > > > > Thank you WUHU i will try it
                    > > > >
                    > > > > i put and wind at km/h is corect ??i see variables have %
                    time%
                    > > and
                    > > > > time_hms what is hms ,and i put and time it time it was styl
                    > > > > 12:30 ???
                    > > > >
                    > > > > I see for it i must to go from another way and no like
                    before
                    > > like
                    > > > > zwntana.txt file .
                    > > > >
                    > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > > > %[daily_extremes]low_outdoor_humidity%
                    > > > > %[daily_extremes]high_outdoor_humidity%
                    > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                    > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                    > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                    > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                    > > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                    > > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                    > > > >
                    > > > > Thank you
                    > > > > Dimitris
                    > > > >
                    > > > >
                    > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > > > <wuhu_software@> wrote:
                    > > > > >
                    > > > > > Dimitris,
                    > > > > >
                    > > > > > Before following the below, hit Stop on WUHU so that it is
                    > not
                    > > > > > attempting to process templates while you are making
                    changes.
                    > > > > >
                    > > > > > Since you are wanting to process multiple template files,
                    I
                    > > would
                    > > > > > recommend creating an action file. Action files allow you
                    to
                    > > > > process
                    > > > > > multiple templates and other commands, one per line.
                    > > > > >
                    > > > > > To use an action file, would would enter the following
                    line
                    > in
                    > > to
                    > > > > the
                    > > > > > action on activation:
                    > > > > >
                    > > > > > actionfile:"C:\ActionList.txt"
                    > > > > >
                    > > > > > Open notepad. Enter the following lines:
                    > > > > >
                    > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                    > > > > >
                    template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                    > > > > >
                    > > > > > Save this file to C:\ActionList.txt
                    > > > > >
                    > > > > > Create a new Notepad file, enter the following:
                    > > > > >
                    > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > > > > %[daily_extremes]low_outdoor_humidity%
                    > > > > > %[daily_extremes]high_outdoor_humidity%
                    > > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                    > > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                    > > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                    > > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                    > > > > >
                    > > > > > Save this file to C:\mynewtemplate.txt
                    > > > > >
                    > > > > > Press start on WUHU to resume processing.
                    > > > > >
                    > > > > > After an update, the following files should be created:
                    > > > > >
                    > > > > > D:\zwntana.txt
                    > > > > > D:\mynewtemplateoutput.txt
                    > > > > >
                    > > > > >
                    > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    > > > > > <petros0022@> wrote:
                    > > > > > >
                    > > > > > > Yes WUHU author nad thank you
                    > > > > > >
                    > > > > > > Do you make for me a template like this for max-min
                    > > > > > > temperature,humidity,wind,dew
                    point,barometer ,pressure ??
                    > > > > > > And tell me please what to do step by step : i think
                    Alert
                    > > > > action --
                    > > > > > >
                    > > > > > > WUHU operation alarm Action -->mark on weather up date --
                    >
                    > > > press
                    > > > > > > sound action -->and action and activation i put like it
                    > > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                    > > > correct
                    > > > > or
                    > > > > > > no ??.
                    > > > > > >
                    > > > > > > Thank you
                    > > > > > > Dimitris from Greece
                    > > > > > > http://www.geocities.com/meteo19671967
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > > > --- In
                    wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > > > > > <wuhu_software@> wrote:
                    > > > > > > >
                    > > > > > > > Dimitris,
                    > > > > > > >
                    > > > > > > > Are you talking about the extended currdat.lst
                    template
                    > > > > variables
                    > > > > > > like:
                    > > > > > > >
                    > > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > > > > > >
                    > > > > > > > and so on?
                    > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > > > --- In
                    wuhu_software_group@yahoogroups.com, "petros0022"
                    > > > > > > > <petros0022@> wrote:
                    > > > > > > > >
                    > > > > > > > > Hello from Greece
                    > > > > > > > > I like to ask you ,i can to make a temblate
                    variables
                    > > about
                    > > > > min-
                    > > > > > > max
                    > > > > > > > > weather data every day , temperature-humidity-
                    pressure-
                    > > wind-
                    > > > > dew
                    > > > > > > point-
                    > > > > > > > > barometer ?
                    > > > > > > > > And if yes how is the way ?
                    > > > > > > > >
                    > > > > > > > > Thank you
                    > > > > > > > > Dimitris from Greece
                    > > > > > > > > http://www.geocities.com/meteo19671967
                    > > > > > > > >
                    > > > > > > >
                    > > > > > >
                    > > > > >
                    > > > >
                    > > >
                    > >
                    >
                  Your message has been successfully submitted and would be delivered to recipients shortly.