Loading ...
Sorry, an error occurred while loading the content.

Re: Variables template min-max weather data

Expand Messages
  • petros0022
    Yes WUHU author nad thank you Do you make for me a template like this for max-min temperature,humidity,wind,dew point,barometer ,pressure ?? And tell me please
    Message 1 of 11 , Sep 7, 2007
    • 0 Attachment
      Yes WUHU author nad thank you

      Do you make for me a template like this for max-min
      temperature,humidity,wind,dew point,barometer ,pressure ??
      And tell me please what to do step by step : i think Alert action -->
      WUHU operation alarm Action -->mark on weather up date --> press
      sound action -->and action and activation i put like it
      template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct or
      no ??.

      Thank you
      Dimitris from Greece
      http://www.geocities.com/meteo19671967



      --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      <wuhu_software@...> wrote:
      >
      > Dimitris,
      >
      > Are you talking about the extended currdat.lst template variables
      like:
      >
      > %[daily_extremes]low_outdoor_temperature_deg_C%
      > %[daily_extremes]high_outdoor_temperature_deg_C%
      >
      > and so on?
      >
      >
      >
      > --- In wuhu_software_group@yahoogroups.com, "petros0022"
      > <petros0022@> wrote:
      > >
      > > Hello from Greece
      > > I like to ask you ,i can to make a temblate variables about min-
      max
      > > weather data every day , temperature-humidity-pressure-wind-dew
      point-
      > > barometer ?
      > > And if yes how is the way ?
      > >
      > > Thank you
      > > Dimitris from Greece
      > > http://www.geocities.com/meteo19671967
      > >
      >
    • wuhu_software
      Dimitris, Before following the below, hit Stop on WUHU so that it is not attempting to process templates while you are making changes. Since you are wanting to
      Message 2 of 11 , Sep 7, 2007
      • 0 Attachment
        Dimitris,

        Before following the below, hit Stop on WUHU so that it is not
        attempting to process templates while you are making changes.

        Since you are wanting to process multiple template files, I would
        recommend creating an action file. Action files allow you to process
        multiple templates and other commands, one per line.

        To use an action file, would would enter the following line in to the
        action on activation:

        actionfile:"C:\ActionList.txt"

        Open notepad. Enter the following lines:

        template:"D:\inputzwntana.txt" "D:\zwntana.txt"
        template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"

        Save this file to C:\ActionList.txt

        Create a new Notepad file, enter the following:

        %[daily_extremes]low_outdoor_temperature_deg_C%
        %[daily_extremes]high_outdoor_temperature_deg_C%
        %[daily_extremes]low_outdoor_humidity%
        %[daily_extremes]high_outdoor_humidity%
        %[daily_extremes]low_outdoor_dewpoint_deg_C%
        %[daily_extremes]high_outdoor_dewpoint_deg_C%
        %[daily_extremes]low_outdoor_relative_pressure_hpa%
        %[daily_extremes]high_outdoor_relative_pressure_hpa%

        Save this file to C:\mynewtemplate.txt

        Press start on WUHU to resume processing.

        After an update, the following files should be created:

        D:\zwntana.txt
        D:\mynewtemplateoutput.txt


        --- In wuhu_software_group@yahoogroups.com, "petros0022"
        <petros0022@...> wrote:
        >
        > Yes WUHU author nad thank you
        >
        > Do you make for me a template like this for max-min
        > temperature,humidity,wind,dew point,barometer ,pressure ??
        > And tell me please what to do step by step : i think Alert action --
        >
        > WUHU operation alarm Action -->mark on weather up date --> press
        > sound action -->and action and activation i put like it
        > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct or
        > no ??.
        >
        > Thank you
        > Dimitris from Greece
        > http://www.geocities.com/meteo19671967
        >
        >
        >
        > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        > <wuhu_software@> wrote:
        > >
        > > Dimitris,
        > >
        > > Are you talking about the extended currdat.lst template variables
        > like:
        > >
        > > %[daily_extremes]low_outdoor_temperature_deg_C%
        > > %[daily_extremes]high_outdoor_temperature_deg_C%
        > >
        > > and so on?
        > >
        > >
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
        > > <petros0022@> wrote:
        > > >
        > > > Hello from Greece
        > > > I like to ask you ,i can to make a temblate variables about min-
        > max
        > > > weather data every day , temperature-humidity-pressure-wind-dew
        > point-
        > > > barometer ?
        > > > And if yes how is the way ?
        > > >
        > > > Thank you
        > > > Dimitris from Greece
        > > > http://www.geocities.com/meteo19671967
        > > >
        > >
        >
      • wuhu_software
        Dimitris, I forgot to include the low/high wind speed in the new template. Here is a list of all of the daily extremes available for use in the new template:
        Message 3 of 11 , Sep 7, 2007
        • 0 Attachment
          Dimitris,

          I forgot to include the low/high wind speed in the new template.

          Here is a list of all of the daily extremes available for use in the
          new template:

          %[daily_extremes]low_outdoor_temperature_time%
          %[daily_extremes]low_outdoor_temperature_time_hms%
          %[daily_extremes]low_outdoor_temperature_deg_C%
          %[daily_extremes]low_outdoor_temperature_deg_F%
          %[daily_extremes]high_outdoor_temperature_time%
          %[daily_extremes]high_outdoor_temperature_time_hms%
          %[daily_extremes]high_outdoor_temperature_deg_C%
          %[daily_extremes]high_outdoor_temperature_deg_F%
          %[daily_extremes]low_outdoor_humidity_time%
          %[daily_extremes]low_outdoor_humidity_time_hms%
          %[daily_extremes]low_outdoor_humidity%
          %[daily_extremes]high_outdoor_humidity_time%
          %[daily_extremes]high_outdoor_humidity_time_hms%
          %[daily_extremes]high_outdoor_humidity%
          %[daily_extremes]low_outdoor_dewpoint_time%
          %[daily_extremes]low_outdoor_dewpoint_time_hms%
          %[daily_extremes]low_outdoor_dewpoint_deg_C%
          %[daily_extremes]low_outdoor_dewpoint_deg_F%
          %[daily_extremes]high_outdoor_dewpoint_time%
          %[daily_extremes]high_outdoor_dewpoint_time_hms%
          %[daily_extremes]high_outdoor_dewpoint_deg_C%
          %[daily_extremes]high_outdoor_dewpoint_deg_F%
          %[daily_extremes]low_outdoor_windchill_time%
          %[daily_extremes]low_outdoor_windchill_time_hms%
          %[daily_extremes]low_outdoor_windchill_deg_C%
          %[daily_extremes]low_outdoor_windchill_deg_F%
          %[daily_extremes]high_outdoor_windchill_time%
          %[daily_extremes]high_outdoor_windchill_time_hms%
          %[daily_extremes]high_outdoor_windchill_deg_C%
          %[daily_extremes]high_outdoor_windchill_deg_F%
          %[daily_extremes]low_outdoor_wind_direction_time%
          %[daily_extremes]low_outdoor_wind_direction_time_hms%
          %[daily_extremes]low_outdoor_wind_direction%
          %[daily_extremes]low_outdoor_wind_direction_letters%
          %[daily_extremes]high_outdoor_wind_direction_time%
          %[daily_extremes]high_outdoor_wind_direction_time_hms%
          %[daily_extremes]high_outdoor_wind_direction%
          %[daily_extremes]high_outdoor_wind_direction_letters%
          %[daily_extremes]low_outdoor_wind_speed_time%
          %[daily_extremes]low_outdoor_wind_speed_time_hms%
          %[daily_extremes]low_outdoor_wind_speed_kmh%
          %[daily_extremes]low_outdoor_wind_speed_mph%
          %[daily_extremes]high_outdoor_wind_speed_time%
          %[daily_extremes]high_outdoor_wind_speed_time_hms%
          %[daily_extremes]high_outdoor_wind_speed_kmh%
          %[daily_extremes]high_outdoor_wind_speed_mph%
          %[daily_extremes]low_outdoor_wind_gust_time%
          %[daily_extremes]low_outdoor_wind_gust_time_hms%
          %[daily_extremes]low_outdoor_wind_gust_kmh%
          %[daily_extremes]low_outdoor_wind_gust_mph%
          %[daily_extremes]high_outdoor_wind_gust_time%
          %[daily_extremes]high_outdoor_wind_gust_time_hms%
          %[daily_extremes]high_outdoor_wind_gust_kmh%
          %[daily_extremes]high_outdoor_wind_gust_mph%
          %[daily_extremes]low_outdoor_average_wind_speed_time%
          %[daily_extremes]low_outdoor_average_wind_speed_time_hms%
          %[daily_extremes]low_outdoor_average_wind_speed_kmh%
          %[daily_extremes]low_outdoor_average_wind_speed_mph%
          %[daily_extremes]high_outdoor_average_wind_speed_time%
          %[daily_extremes]high_outdoor_average_wind_speed_time_hms%
          %[daily_extremes]high_outdoor_average_wind_speed_kmh%
          %[daily_extremes]high_outdoor_average_wind_speed_mph%
          %[daily_extremes]low_outdoor_relative_pressure_time%
          %[daily_extremes]low_outdoor_relative_pressure_time_hms%
          %[daily_extremes]low_outdoor_relative_pressure_hpa%
          %[daily_extremes]low_outdoor_relative_pressure_inHg%
          %[daily_extremes]high_outdoor_relative_pressure_time%
          %[daily_extremes]high_outdoor_relative_pressure_time_hms%
          %[daily_extremes]high_outdoor_relative_pressure_hpa%
          %[daily_extremes]high_outdoor_relative_pressure_inHg%
          %[daily_extremes]low_outdoor_absolute_pressure_time%
          %[daily_extremes]low_outdoor_absolute_pressure_time_hms%
          %[daily_extremes]low_outdoor_absolute_pressure_hpa%
          %[daily_extremes]low_outdoor_absolute_pressure_inHg%
          %[daily_extremes]high_outdoor_absolute_pressure_time%
          %[daily_extremes]high_outdoor_absolute_pressure_time_hms%
          %[daily_extremes]high_outdoor_absolute_pressure_hpa%
          %[daily_extremes]high_outdoor_absolute_pressure_inHg%
          %[daily_extremes]low_outdoor_rain1hr_time%
          %[daily_extremes]low_outdoor_rain1hr_time_hms%
          %[daily_extremes]low_outdoor_rain1hr_mm%
          %[daily_extremes]low_outdoor_rain1hr_inch%
          %[daily_extremes]high_outdoor_rain1hr_time%
          %[daily_extremes]high_outdoor_rain1hr_time_hms%
          %[daily_extremes]high_outdoor_rain1hr_mm%
          %[daily_extremes]high_outdoor_rain1hr_inch%
          %[daily_extremes]low_outdoor_rain24hr_time%
          %[daily_extremes]low_outdoor_rain24hr_time_hms%
          %[daily_extremes]low_outdoor_rain24hr_mm%
          %[daily_extremes]low_outdoor_rain24hr_inch%
          %[daily_extremes]high_outdoor_rain24hr_time%
          %[daily_extremes]high_outdoor_rain24hr_time_hms%
          %[daily_extremes]high_outdoor_rain24hr_mm%
          %[daily_extremes]high_outdoor_rain24hr_inch%
          %[daily_extremes]low_outdoor_rain_daily_total_time%
          %[daily_extremes]low_outdoor_rain_daily_total_time_hms%
          %[daily_extremes]low_outdoor_rain_daily_total_mm%
          %[daily_extremes]low_outdoor_rain_daily_total_inch%
          %[daily_extremes]high_outdoor_rain_daily_total_time%
          %[daily_extremes]high_outdoor_rain_daily_total_time_hms%
          %[daily_extremes]high_outdoor_rain_daily_total_mm%
          %[daily_extremes]high_outdoor_rain_daily_total_inch%
          %[daily_extremes]low_outdoor_rain_total_time%
          %[daily_extremes]low_outdoor_rain_total_time_hms%
          %[daily_extremes]low_outdoor_rain_total_mm%
          %[daily_extremes]low_outdoor_rain_total_inch%
          %[daily_extremes]high_outdoor_rain_total_time%
          %[daily_extremes]high_outdoor_rain_total_time_hms%
          %[daily_extremes]high_outdoor_rain_total_mm%
          %[daily_extremes]high_outdoor_rain_total_inch%
          %[daily_extremes]low_indoor_temperature_time%
          %[daily_extremes]low_indoor_temperature_time_hms%
          %[daily_extremes]low_indoor_temperature_deg_C%
          %[daily_extremes]low_indoor_temperature_deg_F%
          %[daily_extremes]high_indoor_temperature_time%
          %[daily_extremes]high_indoor_temperature_time_hms%
          %[daily_extremes]high_indoor_temperature_deg_C%
          %[daily_extremes]high_indoor_temperature_deg_F%
          %[daily_extremes]low_indoor_humidity_time%
          %[daily_extremes]low_indoor_humidity_time_hms%
          %[daily_extremes]low_indoor_humidity%
          %[daily_extremes]high_indoor_humidity_time%
          %[daily_extremes]high_indoor_humidity_time_hms%
          %[daily_extremes]high_indoor_humidity%



          --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
          <wuhu_software@...> wrote:
          >
          > Dimitris,
          >
          > Before following the below, hit Stop on WUHU so that it is not
          > attempting to process templates while you are making changes.
          >
          > Since you are wanting to process multiple template files, I would
          > recommend creating an action file. Action files allow you to
          process
          > multiple templates and other commands, one per line.
          >
          > To use an action file, would would enter the following line in to
          the
          > action on activation:
          >
          > actionfile:"C:\ActionList.txt"
          >
          > Open notepad. Enter the following lines:
          >
          > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
          > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
          >
          > Save this file to C:\ActionList.txt
          >
          > Create a new Notepad file, enter the following:
          >
          > %[daily_extremes]low_outdoor_temperature_deg_C%
          > %[daily_extremes]high_outdoor_temperature_deg_C%
          > %[daily_extremes]low_outdoor_humidity%
          > %[daily_extremes]high_outdoor_humidity%
          > %[daily_extremes]low_outdoor_dewpoint_deg_C%
          > %[daily_extremes]high_outdoor_dewpoint_deg_C%
          > %[daily_extremes]low_outdoor_relative_pressure_hpa%
          > %[daily_extremes]high_outdoor_relative_pressure_hpa%
          >
          > Save this file to C:\mynewtemplate.txt
          >
          > Press start on WUHU to resume processing.
          >
          > After an update, the following files should be created:
          >
          > D:\zwntana.txt
          > D:\mynewtemplateoutput.txt
          >
          >
          > --- In wuhu_software_group@yahoogroups.com, "petros0022"
          > <petros0022@> wrote:
          > >
          > > Yes WUHU author nad thank you
          > >
          > > Do you make for me a template like this for max-min
          > > temperature,humidity,wind,dew point,barometer ,pressure ??
          > > And tell me please what to do step by step : i think Alert
          action --
          > >
          > > WUHU operation alarm Action -->mark on weather up date --> press
          > > sound action -->and action and activation i put like it
          > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct
          or
          > > no ??.
          > >
          > > Thank you
          > > Dimitris from Greece
          > > http://www.geocities.com/meteo19671967
          > >
          > >
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
          > > <wuhu_software@> wrote:
          > > >
          > > > Dimitris,
          > > >
          > > > Are you talking about the extended currdat.lst template
          variables
          > > like:
          > > >
          > > > %[daily_extremes]low_outdoor_temperature_deg_C%
          > > > %[daily_extremes]high_outdoor_temperature_deg_C%
          > > >
          > > > and so on?
          > > >
          > > >
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
          > > > <petros0022@> wrote:
          > > > >
          > > > > Hello from Greece
          > > > > I like to ask you ,i can to make a temblate variables about
          min-
          > > max
          > > > > weather data every day , temperature-humidity-pressure-wind-
          dew
          > > point-
          > > > > barometer ?
          > > > > And if yes how is the way ?
          > > > >
          > > > > Thank you
          > > > > Dimitris from Greece
          > > > > http://www.geocities.com/meteo19671967
          > > > >
          > > >
          > >
          >
        • petros0022
          Thank you WUHU i will try it i put and wind at km/h is corect ??i see variables have %time% and time_hms what is hms ,and i put and time it time it was styl
          Message 4 of 11 , Sep 7, 2007
          • 0 Attachment
            Thank you WUHU i will try it

            i put and wind at km/h is corect ??i see variables have %time% and
            time_hms what is hms ,and i put and time it time it was styl
            12:30 ???

            I see for it i must to go from another way and no like before like
            zwntana.txt file .

            %[daily_extremes]low_outdoor_temperature_deg_C%
            %[daily_extremes]high_outdoor_temperature_deg_C%
            %[daily_extremes]low_outdoor_humidity%
            %[daily_extremes]high_outdoor_humidity%
            %[daily_extremes]low_outdoor_dewpoint_deg_C%
            %[daily_extremes]high_outdoor_dewpoint_deg_C%
            %[daily_extremes]low_outdoor_relative_pressure_hpa%
            %[daily_extremes]high_outdoor_relative_pressure_hpa%
            %[daily_extremes]low_outdoor_wind_speed_km/h%
            %[daily_extremes]high_outdoor_wind_speed_km/h%

            Thank you
            Dimitris


            --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            <wuhu_software@...> wrote:
            >
            > Dimitris,
            >
            > Before following the below, hit Stop on WUHU so that it is not
            > attempting to process templates while you are making changes.
            >
            > Since you are wanting to process multiple template files, I would
            > recommend creating an action file. Action files allow you to
            process
            > multiple templates and other commands, one per line.
            >
            > To use an action file, would would enter the following line in to
            the
            > action on activation:
            >
            > actionfile:"C:\ActionList.txt"
            >
            > Open notepad. Enter the following lines:
            >
            > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
            > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
            >
            > Save this file to C:\ActionList.txt
            >
            > Create a new Notepad file, enter the following:
            >
            > %[daily_extremes]low_outdoor_temperature_deg_C%
            > %[daily_extremes]high_outdoor_temperature_deg_C%
            > %[daily_extremes]low_outdoor_humidity%
            > %[daily_extremes]high_outdoor_humidity%
            > %[daily_extremes]low_outdoor_dewpoint_deg_C%
            > %[daily_extremes]high_outdoor_dewpoint_deg_C%
            > %[daily_extremes]low_outdoor_relative_pressure_hpa%
            > %[daily_extremes]high_outdoor_relative_pressure_hpa%
            >
            > Save this file to C:\mynewtemplate.txt
            >
            > Press start on WUHU to resume processing.
            >
            > After an update, the following files should be created:
            >
            > D:\zwntana.txt
            > D:\mynewtemplateoutput.txt
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "petros0022"
            > <petros0022@> wrote:
            > >
            > > Yes WUHU author nad thank you
            > >
            > > Do you make for me a template like this for max-min
            > > temperature,humidity,wind,dew point,barometer ,pressure ??
            > > And tell me please what to do step by step : i think Alert
            action --
            > >
            > > WUHU operation alarm Action -->mark on weather up date --> press
            > > sound action -->and action and activation i put like it
            > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am correct
            or
            > > no ??.
            > >
            > > Thank you
            > > Dimitris from Greece
            > > http://www.geocities.com/meteo19671967
            > >
            > >
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            > > <wuhu_software@> wrote:
            > > >
            > > > Dimitris,
            > > >
            > > > Are you talking about the extended currdat.lst template
            variables
            > > like:
            > > >
            > > > %[daily_extremes]low_outdoor_temperature_deg_C%
            > > > %[daily_extremes]high_outdoor_temperature_deg_C%
            > > >
            > > > and so on?
            > > >
            > > >
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
            > > > <petros0022@> wrote:
            > > > >
            > > > > Hello from Greece
            > > > > I like to ask you ,i can to make a temblate variables about
            min-
            > > max
            > > > > weather data every day , temperature-humidity-pressure-wind-
            dew
            > > point-
            > > > > barometer ?
            > > > > And if yes how is the way ?
            > > > >
            > > > > Thank you
            > > > > Dimitris from Greece
            > > > > http://www.geocities.com/meteo19671967
            > > > >
            > > >
            > >
            >
          • wuhu_software
            _time variables contain AM/PM, hh:mm:ss AM/PM _time_hms variables are the 24 hour format: hh:mm:ss ... press ... correct
            Message 5 of 11 , Sep 7, 2007
            • 0 Attachment
              _time variables contain AM/PM, hh:mm:ss AM/PM

              _time_hms variables are the 24 hour format: hh:mm:ss


              --- In wuhu_software_group@yahoogroups.com, "petros0022"
              <petros0022@...> wrote:
              >
              > Thank you WUHU i will try it
              >
              > i put and wind at km/h is corect ??i see variables have %time% and
              > time_hms what is hms ,and i put and time it time it was styl
              > 12:30 ???
              >
              > I see for it i must to go from another way and no like before like
              > zwntana.txt file .
              >
              > %[daily_extremes]low_outdoor_temperature_deg_C%
              > %[daily_extremes]high_outdoor_temperature_deg_C%
              > %[daily_extremes]low_outdoor_humidity%
              > %[daily_extremes]high_outdoor_humidity%
              > %[daily_extremes]low_outdoor_dewpoint_deg_C%
              > %[daily_extremes]high_outdoor_dewpoint_deg_C%
              > %[daily_extremes]low_outdoor_relative_pressure_hpa%
              > %[daily_extremes]high_outdoor_relative_pressure_hpa%
              > %[daily_extremes]low_outdoor_wind_speed_km/h%
              > %[daily_extremes]high_outdoor_wind_speed_km/h%
              >
              > Thank you
              > Dimitris
              >
              >
              > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
              > <wuhu_software@> wrote:
              > >
              > > Dimitris,
              > >
              > > Before following the below, hit Stop on WUHU so that it is not
              > > attempting to process templates while you are making changes.
              > >
              > > Since you are wanting to process multiple template files, I would
              > > recommend creating an action file. Action files allow you to
              > process
              > > multiple templates and other commands, one per line.
              > >
              > > To use an action file, would would enter the following line in to
              > the
              > > action on activation:
              > >
              > > actionfile:"C:\ActionList.txt"
              > >
              > > Open notepad. Enter the following lines:
              > >
              > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
              > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
              > >
              > > Save this file to C:\ActionList.txt
              > >
              > > Create a new Notepad file, enter the following:
              > >
              > > %[daily_extremes]low_outdoor_temperature_deg_C%
              > > %[daily_extremes]high_outdoor_temperature_deg_C%
              > > %[daily_extremes]low_outdoor_humidity%
              > > %[daily_extremes]high_outdoor_humidity%
              > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
              > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
              > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
              > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
              > >
              > > Save this file to C:\mynewtemplate.txt
              > >
              > > Press start on WUHU to resume processing.
              > >
              > > After an update, the following files should be created:
              > >
              > > D:\zwntana.txt
              > > D:\mynewtemplateoutput.txt
              > >
              > >
              > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
              > > <petros0022@> wrote:
              > > >
              > > > Yes WUHU author nad thank you
              > > >
              > > > Do you make for me a template like this for max-min
              > > > temperature,humidity,wind,dew point,barometer ,pressure ??
              > > > And tell me please what to do step by step : i think Alert
              > action --
              > > >
              > > > WUHU operation alarm Action -->mark on weather up date -->
              press
              > > > sound action -->and action and activation i put like it
              > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
              correct
              > or
              > > > no ??.
              > > >
              > > > Thank you
              > > > Dimitris from Greece
              > > > http://www.geocities.com/meteo19671967
              > > >
              > > >
              > > >
              > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
              > > > <wuhu_software@> wrote:
              > > > >
              > > > > Dimitris,
              > > > >
              > > > > Are you talking about the extended currdat.lst template
              > variables
              > > > like:
              > > > >
              > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
              > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
              > > > >
              > > > > and so on?
              > > > >
              > > > >
              > > > >
              > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
              > > > > <petros0022@> wrote:
              > > > > >
              > > > > > Hello from Greece
              > > > > > I like to ask you ,i can to make a temblate variables about
              > min-
              > > > max
              > > > > > weather data every day , temperature-humidity-pressure-wind-
              > dew
              > > > point-
              > > > > > barometer ?
              > > > > > And if yes how is the way ?
              > > > > >
              > > > > > Thank you
              > > > > > Dimitris from Greece
              > > > > > http://www.geocities.com/meteo19671967
              > > > > >
              > > > >
              > > >
              > >
              >
            • petros0022
              WUHU author i do it, but i don not see anything in new file on notepad . I do this i do a new file D: ActionList.txt and I put inside this
              Message 6 of 11 , Sep 7, 2007
              • 0 Attachment
                WUHU author i do it, but i don not see anything in new file on
                notepad .

                I do this
                i do a new file D:\ActionList.txt and I put inside this
                template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                template:"D:\minmax.txt" "D:\minmaxoutput.txt"

                ACTION and activation i put inside this
                actionfile:"D:\ActionList.txt"

                AND a file from notepad name "D:\minmaxoutput.txt"

                and i put inside this

                %[daily_extremes]low_outdoor_temperature_deg_C%
                %[daily_extremes]high_outdoor_temperature_deg_C%
                %[daily_extremes]low_outdoor_humidity%
                %[daily_extremes]high_outdoor_humidity%
                %[daily_extremes]low_outdoor_dewpoint_deg_C%
                %[daily_extremes]high_outdoor_dewpoint_deg_C%
                %[daily_extremes]low_outdoor_relative_pressure_hpa%
                %[daily_extremes]high_outdoor_relative_pressure_hpa%
                %[daily_extremes]low_outdoor_wind_speed_km/h%
                %[daily_extremes]high_outdoor_wind_speed_km/h%

                i see in D:/ disk a new notepad name minmaxoutput but it is empty it
                no wrriten inside nothing

                Where is my wrong ??

                Thank you Dimitris



                --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                <wuhu_software@...> wrote:
                >
                > _time variables contain AM/PM, hh:mm:ss AM/PM
                >
                > _time_hms variables are the 24 hour format: hh:mm:ss
                >
                >
                > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                > <petros0022@> wrote:
                > >
                > > Thank you WUHU i will try it
                > >
                > > i put and wind at km/h is corect ??i see variables have %time%
                and
                > > time_hms what is hms ,and i put and time it time it was styl
                > > 12:30 ???
                > >
                > > I see for it i must to go from another way and no like before
                like
                > > zwntana.txt file .
                > >
                > > %[daily_extremes]low_outdoor_temperature_deg_C%
                > > %[daily_extremes]high_outdoor_temperature_deg_C%
                > > %[daily_extremes]low_outdoor_humidity%
                > > %[daily_extremes]high_outdoor_humidity%
                > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                > >
                > > Thank you
                > > Dimitris
                > >
                > >
                > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                > > <wuhu_software@> wrote:
                > > >
                > > > Dimitris,
                > > >
                > > > Before following the below, hit Stop on WUHU so that it is not
                > > > attempting to process templates while you are making changes.
                > > >
                > > > Since you are wanting to process multiple template files, I
                would
                > > > recommend creating an action file. Action files allow you to
                > > process
                > > > multiple templates and other commands, one per line.
                > > >
                > > > To use an action file, would would enter the following line in
                to
                > > the
                > > > action on activation:
                > > >
                > > > actionfile:"C:\ActionList.txt"
                > > >
                > > > Open notepad. Enter the following lines:
                > > >
                > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                > > >
                > > > Save this file to C:\ActionList.txt
                > > >
                > > > Create a new Notepad file, enter the following:
                > > >
                > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                > > > %[daily_extremes]low_outdoor_humidity%
                > > > %[daily_extremes]high_outdoor_humidity%
                > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                > > >
                > > > Save this file to C:\mynewtemplate.txt
                > > >
                > > > Press start on WUHU to resume processing.
                > > >
                > > > After an update, the following files should be created:
                > > >
                > > > D:\zwntana.txt
                > > > D:\mynewtemplateoutput.txt
                > > >
                > > >
                > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                > > > <petros0022@> wrote:
                > > > >
                > > > > Yes WUHU author nad thank you
                > > > >
                > > > > Do you make for me a template like this for max-min
                > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
                > > > > And tell me please what to do step by step : i think Alert
                > > action --
                > > > >
                > > > > WUHU operation alarm Action -->mark on weather up date -->
                > press
                > > > > sound action -->and action and activation i put like it
                > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                > correct
                > > or
                > > > > no ??.
                > > > >
                > > > > Thank you
                > > > > Dimitris from Greece
                > > > > http://www.geocities.com/meteo19671967
                > > > >
                > > > >
                > > > >
                > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                > > > > <wuhu_software@> wrote:
                > > > > >
                > > > > > Dimitris,
                > > > > >
                > > > > > Are you talking about the extended currdat.lst template
                > > variables
                > > > > like:
                > > > > >
                > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                > > > > >
                > > > > > and so on?
                > > > > >
                > > > > >
                > > > > >
                > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                > > > > > <petros0022@> wrote:
                > > > > > >
                > > > > > > Hello from Greece
                > > > > > > I like to ask you ,i can to make a temblate variables
                about
                > > min-
                > > > > max
                > > > > > > weather data every day , temperature-humidity-pressure-
                wind-
                > > dew
                > > > > point-
                > > > > > > barometer ?
                > > > > > > And if yes how is the way ?
                > > > > > >
                > > > > > > Thank you
                > > > > > > Dimitris from Greece
                > > > > > > http://www.geocities.com/meteo19671967
                > > > > > >
                > > > > >
                > > > >
                > > >
                > >
                >
              • petros0022
                Ok WUHU author my is mistake i forget to mark wrriten extended data all is ok now thank you very much Dimitris from Greece
                Message 7 of 11 , Sep 7, 2007
                • 0 Attachment
                  Ok WUHU author my is mistake i forget to mark wrriten extended
                  data
                  all is ok now thank you very much

                  Dimitris from Greece
                  http://www.geocities.com/meteo19671967





                  --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  <petros0022@...> wrote:
                  >
                  > WUHU author i do it, but i don not see anything in new file on
                  > notepad .
                  >
                  > I do this
                  > i do a new file D:\ActionList.txt and I put inside this
                  > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                  > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
                  >
                  > ACTION and activation i put inside this
                  > actionfile:"D:\ActionList.txt"
                  >
                  > AND a file from notepad name "D:\minmaxoutput.txt"
                  >
                  > and i put inside this
                  >
                  > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > %[daily_extremes]low_outdoor_humidity%
                  > %[daily_extremes]high_outdoor_humidity%
                  > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                  > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                  > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                  > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                  > %[daily_extremes]low_outdoor_wind_speed_km/h%
                  > %[daily_extremes]high_outdoor_wind_speed_km/h%
                  >
                  > i see in D:/ disk a new notepad name minmaxoutput but it is empty
                  it
                  > no wrriten inside nothing
                  >
                  > Where is my wrong ??
                  >
                  > Thank you Dimitris
                  >
                  >
                  >
                  > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > <wuhu_software@> wrote:
                  > >
                  > > _time variables contain AM/PM, hh:mm:ss AM/PM
                  > >
                  > > _time_hms variables are the 24 hour format: hh:mm:ss
                  > >
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  > > <petros0022@> wrote:
                  > > >
                  > > > Thank you WUHU i will try it
                  > > >
                  > > > i put and wind at km/h is corect ??i see variables have %time%
                  > and
                  > > > time_hms what is hms ,and i put and time it time it was styl
                  > > > 12:30 ???
                  > > >
                  > > > I see for it i must to go from another way and no like before
                  > like
                  > > > zwntana.txt file .
                  > > >
                  > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > > > %[daily_extremes]low_outdoor_humidity%
                  > > > %[daily_extremes]high_outdoor_humidity%
                  > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                  > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                  > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                  > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                  > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                  > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                  > > >
                  > > > Thank you
                  > > > Dimitris
                  > > >
                  > > >
                  > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > > <wuhu_software@> wrote:
                  > > > >
                  > > > > Dimitris,
                  > > > >
                  > > > > Before following the below, hit Stop on WUHU so that it is
                  not
                  > > > > attempting to process templates while you are making changes.
                  > > > >
                  > > > > Since you are wanting to process multiple template files, I
                  > would
                  > > > > recommend creating an action file. Action files allow you to
                  > > > process
                  > > > > multiple templates and other commands, one per line.
                  > > > >
                  > > > > To use an action file, would would enter the following line
                  in
                  > to
                  > > > the
                  > > > > action on activation:
                  > > > >
                  > > > > actionfile:"C:\ActionList.txt"
                  > > > >
                  > > > > Open notepad. Enter the following lines:
                  > > > >
                  > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                  > > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                  > > > >
                  > > > > Save this file to C:\ActionList.txt
                  > > > >
                  > > > > Create a new Notepad file, enter the following:
                  > > > >
                  > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > > > > %[daily_extremes]low_outdoor_humidity%
                  > > > > %[daily_extremes]high_outdoor_humidity%
                  > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                  > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                  > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                  > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                  > > > >
                  > > > > Save this file to C:\mynewtemplate.txt
                  > > > >
                  > > > > Press start on WUHU to resume processing.
                  > > > >
                  > > > > After an update, the following files should be created:
                  > > > >
                  > > > > D:\zwntana.txt
                  > > > > D:\mynewtemplateoutput.txt
                  > > > >
                  > > > >
                  > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  > > > > <petros0022@> wrote:
                  > > > > >
                  > > > > > Yes WUHU author nad thank you
                  > > > > >
                  > > > > > Do you make for me a template like this for max-min
                  > > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
                  > > > > > And tell me please what to do step by step : i think Alert
                  > > > action --
                  > > > > >
                  > > > > > WUHU operation alarm Action -->mark on weather up date -->
                  > > press
                  > > > > > sound action -->and action and activation i put like it
                  > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                  > > correct
                  > > > or
                  > > > > > no ??.
                  > > > > >
                  > > > > > Thank you
                  > > > > > Dimitris from Greece
                  > > > > > http://www.geocities.com/meteo19671967
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > --- In
                  wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > > > > <wuhu_software@> wrote:
                  > > > > > >
                  > > > > > > Dimitris,
                  > > > > > >
                  > > > > > > Are you talking about the extended currdat.lst template
                  > > > variables
                  > > > > > like:
                  > > > > > >
                  > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                  > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                  > > > > > >
                  > > > > > > and so on?
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                  > > > > > > <petros0022@> wrote:
                  > > > > > > >
                  > > > > > > > Hello from Greece
                  > > > > > > > I like to ask you ,i can to make a temblate variables
                  > about
                  > > > min-
                  > > > > > max
                  > > > > > > > weather data every day , temperature-humidity-pressure-
                  > wind-
                  > > > dew
                  > > > > > point-
                  > > > > > > > barometer ?
                  > > > > > > > And if yes how is the way ?
                  > > > > > > >
                  > > > > > > > Thank you
                  > > > > > > > Dimitris from Greece
                  > > > > > > > http://www.geocities.com/meteo19671967
                  > > > > > > >
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                • wuhu_software
                  ...a file from notepad name D: minmaxoutput.txt You want to put the contents in to D: minmax.txt rather than D: minmaxoutput.txt . D: minmax.txt is the
                  Message 8 of 11 , Sep 7, 2007
                  • 0 Attachment
                    "...a file from notepad name "D:\minmaxoutput.txt"

                    You want to put the contents in to "D:\minmax.txt" rather
                    than "D:\minmaxoutput.txt".

                    D:\minmax.txt is the input template file, D:\minmaxoutput.txt will be
                    the resulting output file.


                    --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    <petros0022@...> wrote:
                    >
                    > WUHU author i do it, but i don not see anything in new file on
                    > notepad .
                    >
                    > I do this
                    > i do a new file D:\ActionList.txt and I put inside this
                    > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                    > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
                    >
                    > ACTION and activation i put inside this
                    > actionfile:"D:\ActionList.txt"
                    >
                    > AND a file from notepad name "D:\minmaxoutput.txt"
                    >
                    > and i put inside this
                    >
                    > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > %[daily_extremes]low_outdoor_humidity%
                    > %[daily_extremes]high_outdoor_humidity%
                    > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                    > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                    > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                    > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                    > %[daily_extremes]low_outdoor_wind_speed_km/h%
                    > %[daily_extremes]high_outdoor_wind_speed_km/h%
                    >
                    > i see in D:/ disk a new notepad name minmaxoutput but it is empty
                    it
                    > no wrriten inside nothing
                    >
                    > Where is my wrong ??
                    >
                    > Thank you Dimitris
                    >
                    >
                    >
                    > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > <wuhu_software@> wrote:
                    > >
                    > > _time variables contain AM/PM, hh:mm:ss AM/PM
                    > >
                    > > _time_hms variables are the 24 hour format: hh:mm:ss
                    > >
                    > >
                    > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    > > <petros0022@> wrote:
                    > > >
                    > > > Thank you WUHU i will try it
                    > > >
                    > > > i put and wind at km/h is corect ??i see variables have %time%
                    > and
                    > > > time_hms what is hms ,and i put and time it time it was styl
                    > > > 12:30 ???
                    > > >
                    > > > I see for it i must to go from another way and no like before
                    > like
                    > > > zwntana.txt file .
                    > > >
                    > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > > %[daily_extremes]low_outdoor_humidity%
                    > > > %[daily_extremes]high_outdoor_humidity%
                    > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                    > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                    > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                    > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                    > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                    > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                    > > >
                    > > > Thank you
                    > > > Dimitris
                    > > >
                    > > >
                    > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > > <wuhu_software@> wrote:
                    > > > >
                    > > > > Dimitris,
                    > > > >
                    > > > > Before following the below, hit Stop on WUHU so that it is
                    not
                    > > > > attempting to process templates while you are making changes.
                    > > > >
                    > > > > Since you are wanting to process multiple template files, I
                    > would
                    > > > > recommend creating an action file. Action files allow you to
                    > > > process
                    > > > > multiple templates and other commands, one per line.
                    > > > >
                    > > > > To use an action file, would would enter the following line
                    in
                    > to
                    > > > the
                    > > > > action on activation:
                    > > > >
                    > > > > actionfile:"C:\ActionList.txt"
                    > > > >
                    > > > > Open notepad. Enter the following lines:
                    > > > >
                    > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                    > > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                    > > > >
                    > > > > Save this file to C:\ActionList.txt
                    > > > >
                    > > > > Create a new Notepad file, enter the following:
                    > > > >
                    > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > > > %[daily_extremes]low_outdoor_humidity%
                    > > > > %[daily_extremes]high_outdoor_humidity%
                    > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                    > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                    > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                    > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                    > > > >
                    > > > > Save this file to C:\mynewtemplate.txt
                    > > > >
                    > > > > Press start on WUHU to resume processing.
                    > > > >
                    > > > > After an update, the following files should be created:
                    > > > >
                    > > > > D:\zwntana.txt
                    > > > > D:\mynewtemplateoutput.txt
                    > > > >
                    > > > >
                    > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    > > > > <petros0022@> wrote:
                    > > > > >
                    > > > > > Yes WUHU author nad thank you
                    > > > > >
                    > > > > > Do you make for me a template like this for max-min
                    > > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
                    > > > > > And tell me please what to do step by step : i think Alert
                    > > > action --
                    > > > > >
                    > > > > > WUHU operation alarm Action -->mark on weather up date -->
                    > > press
                    > > > > > sound action -->and action and activation i put like it
                    > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                    > > correct
                    > > > or
                    > > > > > no ??.
                    > > > > >
                    > > > > > Thank you
                    > > > > > Dimitris from Greece
                    > > > > > http://www.geocities.com/meteo19671967
                    > > > > >
                    > > > > >
                    > > > > >
                    > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > > > > <wuhu_software@> wrote:
                    > > > > > >
                    > > > > > > Dimitris,
                    > > > > > >
                    > > > > > > Are you talking about the extended currdat.lst template
                    > > > variables
                    > > > > > like:
                    > > > > > >
                    > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                    > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                    > > > > > >
                    > > > > > > and so on?
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                    > > > > > > <petros0022@> wrote:
                    > > > > > > >
                    > > > > > > > Hello from Greece
                    > > > > > > > I like to ask you ,i can to make a temblate variables
                    > about
                    > > > min-
                    > > > > > max
                    > > > > > > > weather data every day , temperature-humidity-pressure-
                    > wind-
                    > > > dew
                    > > > > > point-
                    > > > > > > > barometer ?
                    > > > > > > > And if yes how is the way ?
                    > > > > > > >
                    > > > > > > > Thank you
                    > > > > > > > Dimitris from Greece
                    > > > > > > > http://www.geocities.com/meteo19671967
                    > > > > > > >
                    > > > > > >
                    > > > > >
                    > > > >
                    > > >
                    > >
                    >
                  • petros0022
                    Yes WUHU author i do it and i forget to tell you this template is finaly %[daily_extremes]high_outdoor_temperature_deg_c%--
                    Message 9 of 11 , Sep 7, 2007
                    • 0 Attachment
                      Yes WUHU author i do it and i forget to tell you

                      this template is finaly

                      %[daily_extremes]high_outdoor_temperature_deg_c%--
                      %[daily_extremes]low_outdoor_temperature_deg_C%--
                      %[daily_extremes]high_outdoor_humidity%--
                      %[daily_extremes]low_outdoor_humidity%--
                      %[daily_extremes]high_outdoor_dewpoint_deg_C%--
                      %[daily_extremes]low_outdoor_dewpoint_deg_C%--
                      %[daily_extremes]high_outdoor_relative_pressure_hpa%--
                      %[daily_extremes]low_outdoor_relative_pressure_hpa%--
                      %[daily_extremes]high_outdoor_wind_gust_kmh%

                      I have a problem about clock but i do not interesting the clock

                      And here is my new data min-max

                      http://users.otenet.gr/~meteo/minmaxoutput.txt

                      A great thank you WUHU author

                      Dimitris from Greece
                      http://www.geocities.com/meteo19671967













                      --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      <wuhu_software@...> wrote:
                      >
                      >
                      > "...a file from notepad name "D:\minmaxoutput.txt"
                      >
                      > You want to put the contents in to "D:\minmax.txt" rather
                      > than "D:\minmaxoutput.txt".
                      >
                      > D:\minmax.txt is the input template file, D:\minmaxoutput.txt will
                      be
                      > the resulting output file.
                      >
                      >
                      > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                      > <petros0022@> wrote:
                      > >
                      > > WUHU author i do it, but i don not see anything in new file on
                      > > notepad .
                      > >
                      > > I do this
                      > > i do a new file D:\ActionList.txt and I put inside this
                      > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                      > > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
                      > >
                      > > ACTION and activation i put inside this
                      > > actionfile:"D:\ActionList.txt"
                      > >
                      > > AND a file from notepad name "D:\minmaxoutput.txt"
                      > >
                      > > and i put inside this
                      > >
                      > > %[daily_extremes]low_outdoor_temperature_deg_C%
                      > > %[daily_extremes]high_outdoor_temperature_deg_C%
                      > > %[daily_extremes]low_outdoor_humidity%
                      > > %[daily_extremes]high_outdoor_humidity%
                      > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                      > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                      > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                      > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                      > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                      > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                      > >
                      > > i see in D:/ disk a new notepad name minmaxoutput but it is
                      empty
                      > it
                      > > no wrriten inside nothing
                      > >
                      > > Where is my wrong ??
                      > >
                      > > Thank you Dimitris
                      > >
                      > >
                      > >
                      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > <wuhu_software@> wrote:
                      > > >
                      > > > _time variables contain AM/PM, hh:mm:ss AM/PM
                      > > >
                      > > > _time_hms variables are the 24 hour format: hh:mm:ss
                      > > >
                      > > >
                      > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                      > > > <petros0022@> wrote:
                      > > > >
                      > > > > Thank you WUHU i will try it
                      > > > >
                      > > > > i put and wind at km/h is corect ??i see variables have %
                      time%
                      > > and
                      > > > > time_hms what is hms ,and i put and time it time it was styl
                      > > > > 12:30 ???
                      > > > >
                      > > > > I see for it i must to go from another way and no like
                      before
                      > > like
                      > > > > zwntana.txt file .
                      > > > >
                      > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                      > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                      > > > > %[daily_extremes]low_outdoor_humidity%
                      > > > > %[daily_extremes]high_outdoor_humidity%
                      > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                      > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                      > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                      > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                      > > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
                      > > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
                      > > > >
                      > > > > Thank you
                      > > > > Dimitris
                      > > > >
                      > > > >
                      > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > > > <wuhu_software@> wrote:
                      > > > > >
                      > > > > > Dimitris,
                      > > > > >
                      > > > > > Before following the below, hit Stop on WUHU so that it is
                      > not
                      > > > > > attempting to process templates while you are making
                      changes.
                      > > > > >
                      > > > > > Since you are wanting to process multiple template files,
                      I
                      > > would
                      > > > > > recommend creating an action file. Action files allow you
                      to
                      > > > > process
                      > > > > > multiple templates and other commands, one per line.
                      > > > > >
                      > > > > > To use an action file, would would enter the following
                      line
                      > in
                      > > to
                      > > > > the
                      > > > > > action on activation:
                      > > > > >
                      > > > > > actionfile:"C:\ActionList.txt"
                      > > > > >
                      > > > > > Open notepad. Enter the following lines:
                      > > > > >
                      > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
                      > > > > >
                      template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
                      > > > > >
                      > > > > > Save this file to C:\ActionList.txt
                      > > > > >
                      > > > > > Create a new Notepad file, enter the following:
                      > > > > >
                      > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                      > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                      > > > > > %[daily_extremes]low_outdoor_humidity%
                      > > > > > %[daily_extremes]high_outdoor_humidity%
                      > > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
                      > > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
                      > > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
                      > > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
                      > > > > >
                      > > > > > Save this file to C:\mynewtemplate.txt
                      > > > > >
                      > > > > > Press start on WUHU to resume processing.
                      > > > > >
                      > > > > > After an update, the following files should be created:
                      > > > > >
                      > > > > > D:\zwntana.txt
                      > > > > > D:\mynewtemplateoutput.txt
                      > > > > >
                      > > > > >
                      > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
                      > > > > > <petros0022@> wrote:
                      > > > > > >
                      > > > > > > Yes WUHU author nad thank you
                      > > > > > >
                      > > > > > > Do you make for me a template like this for max-min
                      > > > > > > temperature,humidity,wind,dew
                      point,barometer ,pressure ??
                      > > > > > > And tell me please what to do step by step : i think
                      Alert
                      > > > > action --
                      > > > > > >
                      > > > > > > WUHU operation alarm Action -->mark on weather up date --
                      >
                      > > > press
                      > > > > > > sound action -->and action and activation i put like it
                      > > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
                      > > > correct
                      > > > > or
                      > > > > > > no ??.
                      > > > > > >
                      > > > > > > Thank you
                      > > > > > > Dimitris from Greece
                      > > > > > > http://www.geocities.com/meteo19671967
                      > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > > > --- In
                      wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > > > > > <wuhu_software@> wrote:
                      > > > > > > >
                      > > > > > > > Dimitris,
                      > > > > > > >
                      > > > > > > > Are you talking about the extended currdat.lst
                      template
                      > > > > variables
                      > > > > > > like:
                      > > > > > > >
                      > > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
                      > > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
                      > > > > > > >
                      > > > > > > > and so on?
                      > > > > > > >
                      > > > > > > >
                      > > > > > > >
                      > > > > > > > --- In
                      wuhu_software_group@yahoogroups.com, "petros0022"
                      > > > > > > > <petros0022@> wrote:
                      > > > > > > > >
                      > > > > > > > > Hello from Greece
                      > > > > > > > > I like to ask you ,i can to make a temblate
                      variables
                      > > about
                      > > > > min-
                      > > > > > > max
                      > > > > > > > > weather data every day , temperature-humidity-
                      pressure-
                      > > wind-
                      > > > > dew
                      > > > > > > point-
                      > > > > > > > > barometer ?
                      > > > > > > > > And if yes how is the way ?
                      > > > > > > > >
                      > > > > > > > > Thank you
                      > > > > > > > > Dimitris from Greece
                      > > > > > > > > http://www.geocities.com/meteo19671967
                      > > > > > > > >
                      > > > > > > >
                      > > > > > >
                      > > > > >
                      > > > >
                      > > >
                      > >
                      >
                    Your message has been successfully submitted and would be delivered to recipients shortly.