Loading ...
Sorry, an error occurred while loading the content.

Re: v215 minor refresh, extended currdat.lst time format change.

Expand Messages
  • wuhu_software
    Dan, I think I am going to keep the leading zero on the hour, there is a reason it is there (standard C timestamp), so that if you have a column of time
    Message 1 of 42 , Aug 2, 2007
    • 0 Attachment
      Dan,

      I think I am going to keep the leading zero on the hour, there is a
      reason it is there (standard C timestamp), so that if you have a
      column of time stamps, the data lines up. If the zero is deleted, it
      makes the column shifted.

      Also, I went to 0.001 on the rates. I think 0.01 did not provide
      enough resolution.

      See refresh.

      Thanks.


      --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      <wuhu_software@...> wrote:
      >
      > try:
      >
      > %[rain_24h]inch%
      >
      > --- In wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > <utahweatherbear@> wrote:
      > >
      > > I'm not sure how to do that one, can you give me an example? I
      > tried
      > > to go with %[rain_24h]OutdoorRain24HrIN% and pretty much hosed
      > things.
      > >
      > > :-)
      > >
      > > dan
      > >
      > >
      > >
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > <wuhu_software@> wrote:
      > > >
      > > > Dan,
      > > >
      > > > Use the %[section]var% format, that should address the problem
      > with
      > > > the precision.
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > <utahweatherbear@> wrote:
      > > > >
      > > > > Heath, looks great. Almost perfect. :-) Just get rid of the
      > stray
      > > > > zero in the verbose time, and you'll have to start charging
      an
      > > > > upgrade fee. I'm also still getting my current pcpn readings
      to
      > > > come
      > > > > out in 1/1000ths, even though it is 1/100ths in the
      currdat.lst
      > > > file
      > > > > where you made the changes. Here is the 1/1000th example:
      > > > >
      > > > > %OutdoorRain24HrIN% gives me:
      > > > >
      > > > > 0.040 still.
      > > > >
      > > > > Thanx, Dan
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > <wuhu_software@> wrote:
      > > > > >
      > > > > >
      > > > > > Dan,
      > > > > >
      > > > > > Give refresh a shot.
      > > > > >
      > > > > > Note: this is a new section:
      > > > > >
      > > > > >
      > > > > > [time2]
      > > > > > time_12hr = "7:02:35 PM"
      > > > > > time_12hr_verbose = "Thu Aug 02 07:02:35 PM 2007"
      > > > > > time_hms = "19:02:35"
      > > > > >
      > > > > >
      > > > > > --- In
      wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > <utahweatherbear@> wrote:
      > > > > > >
      > > > > > > Great Heath, thanx! I'm not sure if that'll work in the
      > > fields
      > > > I
      > > > > > was
      > > > > > > thinking, do I add it to the line? I was hoping to
      shorten
      > > the
      > > > > > > following to 1/100th on the template:
      > > > > > >
      > > > > > > [rain_24h]
      > > > > > > mm = "1.00"
      > > > > > > inch = "0.040"
      > > > > > >
      > > > > > > [rain_1h]
      > > > > > > mm = "0.00"
      > > > > > > inch = "0.000"
      > > > > > >
      > > > > > > [rain_daily]
      > > > > > > mm = "1.00"
      > > > > > > inch = "0.040"
      > > > > > >
      > > > > > > [rain_total_monthly]
      > > > > > > mm = "2.01"
      > > > > > > inch = "0.079"
      > > > > > >
      > > > > > > [rain_total_monthly_tweaked]
      > > > > > > mm = "1.00"
      > > > > > > inch = "0.040"
      > > > > > >
      > > > > > > [rain_total_tweaked]
      > > > > > > mm = "1.00"
      > > > > > > inch = "0.040"
      > > > > > >
      > > > > > > And add an am/pm on this (instead of 24hour clock):
      > > > > > >
      > > > > > > start_date_string = "Thu Aug 02 15:02:30 2007"
      > > > > > >
      > > > > > > you may have already made that possible, and I'm missing
      it.
      > > > > > >
      > > > > > > Thanx, Dan
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > > --- In
      wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > > <wuhu_software@> wrote:
      > > > > > > >
      > > > > > > > Dan,
      > > > > > > >
      > > > > > > > Made a new time field and set the precision for all
      rates
      > > of
      > > > > > change
      > > > > > > > to .01.
      > > > > > > >
      > > > > > > > Let me know if that works.
      > > > > > > >
      > > > > > > >
      > > > > > > > [time2]
      > > > > > > > time_12hr = "4:12:49 PM"
      > > > > > > > time_hms = "16:12:49"
      > > > > > > >
      > > > > > > > [hourly_rates_of_change]
      > > > > > > > outdoor_temperature_rate_deg_C = "-2.84"
      > > > > > > > outdoor_temperature_rate_deg_F = "-5.11"
      > > > > > > > outdoor_humidity_rate = "7.73"
      > > > > > > > outdoor_dewpoint_rate_deg_C = "-1.79"
      > > > > > > > outdoor_dewpoint_rate_deg_F = "-3.23"
      > > > > > > > outdoor_apparent_temperature_rate_deg_C = "-1.31"
      > > > > > > > outdoor_apparent_temperature_rate_deg_F = "-2.35"
      > > > > > > > outdoor_wind_speed_rate_kmh = "-9.78"
      > > > > > > > outdoor_wind_speed_rate_mph = "-6.08"
      > > > > > > > outdoor_wind_gust_rate_kmh = "-9.78"
      > > > > > > > outdoor_wind_gust_rate_mph = "-6.08"
      > > > > > > > outdoor_average_wind_speed_rate_kmh = "0.85"
      > > > > > > > outdoor_average_wind_speed_rate_mph = "0.53"
      > > > > > > > outdoor_relative_pressure_rate_hpa = "-0.70"
      > > > > > > > outdoor_relative_pressure_rate_inHg = "-0.02"
      > > > > > > > outdoor_absolute_pressure_rate_hpa = "-1.03"
      > > > > > > > outdoor_absolute_pressure_rate_inHg = "-0.03"
      > > > > > > > outdoor_rain1hr_rate_mm = "0.00"
      > > > > > > > outdoor_rain1hr_rate_inch = "0.00"
      > > > > > > > outdoor_rain24hr_rate_mm = "0.00"
      > > > > > > > outdoor_rain24hr_rate_inch = "0.00"
      > > > > > > > outdoor_rain24hr_rate_mm = "0.00"
      > > > > > > > outdoor_rain24hr_rate_inch = "0.00"
      > > > > > > > outdoor_rain_daily_total_rate_mm = "0.00"
      > > > > > > > outdoor_rain_daily_total_rate_inch = "0.00"
      > > > > > > > outdoor_rain_total_rate_mm = "0.00"
      > > > > > > > outdoor_rain_total_rate_inch = "0.00"
      > > > > > > > indoor_temperature_rate_deg_C = "0.20"
      > > > > > > > indoor_temperature_rate_deg_F = "0.36"
      > > > > > > > indoor_humidity_rate = "0.00"
      > > > > > > >
      > > > > > > > --- In
      > > wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > > > <utahweatherbear@> wrote:
      > > > > > > > >
      > > > > > > > > Thanx Heath! Ready for a couple more? :-) A co-worker
      > was
      > > > > > > confused
      > > > > > > > > (more than usual) when he saw my page with the 0.040
      > > > report.
      > > > > He
      > > > > > > > > didn't notice right away that it was to the neareast
      > > > > 1/1000th,
      > > > > > so
      > > > > > > > he
      > > > > > > > > read it as 0.40. Is there a way to remove the
      > thousandth
      > > > from
      > > > > > the
      > > > > > > > > template, similar to the way it looks on the "max
      rain"
      > > > > > template?
      > > > > > > > > Also, could you do a date with am/pm time for the
      main
      > > > > > date/time
      > > > > > > > > template at the top of my page? Here is my link to
      see
      > > what
      > > > I
      > > > > > > mean.
      > > > > > > > >
      > > > > > > > > http://weatherbear.com/weather/wxstation.htm
      > > > > > > > >
      > > > > > > > > Thanx! Dan
      > > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > > > --- In
      > > wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > > > > <wuhu_software@> wrote:
      > > > > > > > > >
      > > > > > > > > > Dan,
      > > > > > > > > >
      > > > > > > > > > No problem. Get latest refresh.
      > > > > > > > > >
      > > > > > > > > > --- In
      > > > > wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > > > > > <utahweatherbear@> wrote:
      > > > > > > > > > >
      > > > > > > > > > > Thanx for all the cool stuff you've been adding,
      > your
      > > > > > program
      > > > > > > > is
      > > > > > > > > > the
      > > > > > > > > > > best and keeps getting better. Just a nitpick
      now,
      > > any
      > > > > way
      > > > > > to
      > > > > > > > > > remove
      > > > > > > > > > > the "0" from the front on the AM/PM option? Like
      > > > 04:22PM
      > > > > to
      > > > > > > > > 4:22PM?
      > > > > > > > > > >
      > > > > > > > > > > Thanx again!
      > > > > > > > > > >
      > > > > > > > > > > Dan
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > > --- In
      > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > > > > > > <wuhu_software@> wrote:
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > > Changed the default time format for all the
      time
      > > > stamps
      > > > > > > from
      > > > > > > > > the
      > > > > > > > > > > > verbose format like:
      > > > > > > > > > > >
      > > > > > > > > > > > Wed Aug 01 18:04:36 2007
      > > > > > > > > > > >
      > > > > > > > > > > > to:
      > > > > > > > > > > >
      > > > > > > > > > > > 02:19:18 PM
      > > > > > > > > > > >
      > > > > > > > > > > > The 24 hr time stamps are available as well
      (ones
      > > > that
      > > > > > end
      > > > > > > in
      > > > > > > > > > _hms).
      > > > > > > > > > > >
      > > > > > > > > > > > ---
      > > > > > > > > > > >
      > > > > > > > > > > > Software Download:
      > > > > > > > > > > >
      > > > > > > > > > > > http://home.comcast.net/~wuhu_software/
      > > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > >
      > > > > > > > >
      > > > > > > >
      > > > > > >
      > > > > >
      > > > >
      > > >
      > >
      >
    • mrtn_kstr
      ... OK, found it. It s amazing how quickly one can overlook things. (I searched the files twice)
      Message 42 of 42 , Aug 6, 2007
      • 0 Attachment
        > In the files section of the group, there is a file I am maintaining
        > called "extended.txt" that lists all of the variables available.

        OK, found it. It's amazing how quickly one can overlook things. (I
        searched the files twice)
      Your message has been successfully submitted and would be delivered to recipients shortly.