Loading ...
Sorry, an error occurred while loading the content.

Re: HTML Output

Expand Messages
  • wuhu_software
    Larry, Yes, the variable name is to the left, when using templates, you must also specify the section in the INI file, it is in the format of:
    Message 1 of 36 , Aug 1 8:36 AM
    • 0 Attachment
      Larry,

      Yes, the variable name is to the left, when using templates, you must
      also specify the section in the INI file, it is in the format of:

      %[section]variable%

      for the extended currdat.lst file.

      The readme is way out of date. I am hoping that someone will put
      together an html readme to replace the current one. It needs a total
      revamping.

      I have went ahead and added rates of change for the following variables.
      You will need to get the latest copy of WUHU to have these included.

      Since the changes are new, you might keep an eye on the values to make
      sure I did not miscalculate something.

      [hourly_rates_of_change]
      outdoor_temperature_rate_deg_C = "1.9280"
      outdoor_temperature_rate_deg_F = "3.4705"
      outdoor_humidity_rate = "-9.7409"
      outdoor_dewpoint_rate_deg_C = "-2.3014"
      outdoor_dewpoint_rate_deg_F = "-4.1425"
      outdoor_apparent_temperature_rate_deg_C = "1.8405"
      outdoor_apparent_temperature_rate_deg_F = "3.3129"
      outdoor_wind_speed_rate_kmh = "-12.1663"
      outdoor_wind_speed_rate_mph = "-7.5600"
      outdoor_wind_gust_rate_kmh = "-12.1663"
      outdoor_wind_gust_rate_mph = "-7.5600"
      outdoor_average_wind_speed_rate_kmh = "0.0000"
      outdoor_average_wind_speed_rate_mph = "0.0000"
      outdoor_relative_pressure_rate_hpa = "-0.0947"
      outdoor_relative_pressure_rate_inHg = "-0.0028"
      outdoor_absolute_pressure_rate_hpa = "0.0070"
      outdoor_absolute_pressure_rate_inHg = "0.0002"
      outdoor_rain1hr_rate_mm = "0.0000"
      outdoor_rain1hr_rate_inch = "0.0000"
      outdoor_rain24hr_rate_mm = "0.0000"
      outdoor_rain24hr_rate_inch = "0.0000"
      outdoor_rain24hr_rate_mm = "0.0000"
      outdoor_rain24hr_rate_inch = "0.0000"
      outdoor_rain_daily_total_rate_mm = "0.0000"
      outdoor_rain_daily_total_rate_inch = "0.0000"
      outdoor_rain_total_rate_mm = "0.0000"
      outdoor_rain_total_rate_inch = "0.0000"
      indoor_temperature_rate_deg_C = "-0.3546"
      indoor_temperature_rate_deg_F = "-0.6384"
      indoor_humidity_rate = "-1.4093"


      --- In wuhu_software_group@yahoogroups.com, "larrymyers312000"
      <hometownnerd@...> wrote:
      >
      > Ok kewl, thought I was missing it somewhere, thanks. Although since I
      > am using IIS with asp I could actually have the template include some
      > asp script to calculate that and change the name of the output file to
      > .asp and that may be good enough, now just to iron out some logic.
      > Thats right, that was written in one of these messages, the variable
      > name in question would be the text to the left of the "=" sign,
      > correct? Thanks again. Funny, looking at the release notes I see
      > templates is something seen as something most people would not use and
      > I see it as one of the things I am most interested in implementing.
      >
      > Thanks again for the great software
      >
      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > wuhu_software@ wrote:
      > >
      > > Larry,
      > >
      > > I have not yet implemented tags for rates of change... That would
      > > probably be good for the hourly section. Will keep it in mind.
      > >
      > > The easiest way to see the list of available tags is to get the
      > > latest version of WUHU, enabled the output of the currdat.lst file,
      > > enable the extended output. After you start WUHU and get an update,
      > > view the currdat.lst file with notepad.
      > >
      > > There are probably about 400-450 tags available already with the
      > > daily and hourly extremes, timestamps, etc.
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "larrymyers312000"
      > > <hometownnerd@> wrote:
      > > >
      > > > This thread has been great for me, as I am just now starting to
      use
      > > > WUHU and am loving the templates!! I know I am missing it
      somewhere,
      > > > where can I find a list of all variables available in the
      > > templates, I
      > > > would like to see temperature rate in particular. And also if
      > > someone
      > > > has a template that has a large amount of the data possible that
      > > would
      > > > be nice too, would make editing my own easier. Thanks to the
      author
      > > > for having a great product!!
      > > >
      > > > Larry
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > <wuhu_software@> wrote:
      > > > >
      > > > > Don,
      > > > >
      > > > > Actually, there was a bit of a performance hit outputting that
      > > file
      > > > > due to the API I was using.
      > > > >
      > > > > I have updated the code so that it is more efficient.
      > > > >
      > > > > Try the latest refresh and let me know if you still see a CPU
      hit.
      > > > >
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "Don"
      <kansasphotos@>
      > > > > wrote:
      > > > > >
      > > > > > The one minute limitation is in that separate FTP program. I
      > > guess
      > > > > > what gets me confused is that using my own server is just a
      > > matter
      > > > > of
      > > > > > moving files from one directory to the other, even though I
      can
      > > go
      > > > > > through the FTP process. The template: etc process has worked
      > > well
      > > > > > for me, but I noticed when you're using some of the extended
      > > tags it
      > > > > > begins to slow down (maybe its' my imagination).
      > > > > >
      > > > > >
      > > > > >
      > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > <wuhu_software@> wrote:
      > > > > > >
      > > > > > > Don,
      > > > > > >
      > > > > > > If you do not use the templates within the on weather
      > > updates,
      > > > > the
      > > > > > > template will not be processed.
      > > > > > >
      > > > > > > Maybe I am missing the question?
      > > > > > >
      > > > > > > Where is the one minute limitation?
      > > > > > >
      > > > > > > Thanks.
      > > > > > >
      > > > > > >
      > > > > > > --- In wuhu_software_group@yahoogroups.com, "Don"
      > > <kansasphotos@>
      > > > > > > wrote:
      > > > > > > >
      > > > > > > > Heath - I didn't realize the full advantage of using that
      > > > > Save2FTP
      > > > > > > > until I tried it this evening. My question is, since I've
      > > been
      > > > > > > using
      > > > > > > > the "Action/Alert" on updates with the template:
      > > > > D:/HeavyWeather
      > > > > > > etc.,
      > > > > > > > even though your limited to a minimum of 1 minutes
      updates,
      > > I
      > > > > assume
      > > > > > > > that I can discontinue using and unclick that box "On
      > > Weather
      > > > > > > Update"
      > > > > > > > as my template and data are being uploaded to the web site
      > > with
      > > > > the
      > > > > > > > Save2FTP.
      > > > > > > > don
      > > > > > > >
      > > > > > > >
      > > > > > > >
      > > > > > > >
      > > > > > > >
      > > > > > > >
      > > > > > > > --- In
      > > wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > > > <utahweatherbear@> wrote:
      > > > > > > > >
      > > > > > > > > Thanx Don. Not as snazzy as yours, but it's a nice
      > > addition
      > > > > to my
      > > > > > > > > overall site.
      > > > > > > > >
      > > > > > > > > db
      > > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Don"
      > > > > <kansasphotos@>
      > > > > > > > > wrote:
      > > > > > > > > >
      > > > > > > > > > Thanks Dan, I was missing the brackets. Nice page you
      > > have
      > > > > > > > > created.
      > > > > > > > > > I like the way WUHU responds - it's fast and smooth.
      > > > > > > > > > don
      > > > > > > > > >
      > > > > > > > > > --- In
      > > > > wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > > > > > <utahweatherbear@> wrote:
      > > > > > > > > > >
      > > > > > > > > > > Thanx. Yeah, probably should. Was gonna just add it
      > > to my
      > > > > > > main
      > > > > > > > > page
      > > > > > > > > > > menu eventually. Got so much stuff there already.
      :-)
      > > > > > > > > > >
      > > > > > > > > > > http://weatherbear.com/
      > > > > > > > > > >
      > > > > > > > > > > db
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, George
      > > Gunn
      > > > > > > > > > > <professorgunn@> wrote:
      > > > > > > > > > > >
      > > > > > > > > > > > Nice web page Dan. Maybe you could add your
      > > location?
      > > > > > > > > > > >
      > > > > > > > > > > > George
      > > > > > > > > > > >
      > > > > > > > > > > > utahweatherbear <utahweatherbear@>
      > > > > > > > > > > wrote: Heath,
      > > > > > > > > > > >
      > > > > > > > > > > > Think I have most of the stuff figured out. Your
      > > > > template
      > > > > > > idea
      > > > > > > > > is
      > > > > > > > > > > > really cool, and the ftp seems to be working. I
      > > have
      > > > > set
      > > > > > > up a
      > > > > > > > > > > small
      > > > > > > > > > > > page here:
      > > > > > > > > > > >
      > > > > > > > > > > > http://weatherbear.com/weather/wxstation.htm
      > > > > > > > > > > >
      > > > > > > > > > > > I set it up to auto-refresh every 10 seconds for
      > > now.
      > > > > Just
      > > > > > > a
      > > > > > > > > > > couple
      > > > > > > > > > > > questions. Is there a way to just have the time
      > > for
      > > > > the
      > > > > > > > > max/min
      > > > > > > > > > > stuff
      > > > > > > > > > > > instead of the whole date, and possibly
      > > a "letters"
      > > > > option
      > > > > > > for
      > > > > > > > > the
      > > > > > > > > > > > peak wind gust? I couldn't find the options in the
      > > > > > > extended
      > > > > > > > > > > currdat
      > > > > > > > > > > > data, but thought that would be a nice feature to
      > > > > shorten
      > > > > > > > > things
      > > > > > > > > > > up
      > > > > > > > > > > > if we wanted to.
      > > > > > > > > > > >
      > > > > > > > > > > > You totally rock!
      > > > > > > > > > > >
      > > > > > > > > > > > Dan
      > > > > > > > > > > >
      > > > > > > > > > > > --- In
      > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > > > > > > > <wuhu_software@> wrote:
      > > > > > > > > > > > >
      > > > > > > > > > > > > Dan,
      > > > > > > > > > > > >
      > > > > > > > > > > > > You have to shut down WUHU, add the key to
      > > the .ini,
      > > > > > > then
      > > > > > > > > start
      > > > > > > > > > > > WUHU.
      > > > > > > > > > > > >
      > > > > > > > > > > > > 20) A new .INI key was added to enable the
      > > writing
      > > > > of
      > > > > > > > > extended
      > > > > > > > > > > > > information in the currdat.lst (daily lows and
      > > > > highs).
      > > > > > > This
      > > > > > > > > > > > > modification will have no effect if you are not
      > > > > writing
      > > > > > > the
      > > > > > > > > > > > > currdat.lst file or if the below key is not
      > > found in
      > > > > the
      > > > > > > > > WUHU
      > > > > > > > > > > > > configuration INI file.
      > > > > > > > > > > > >
      > > > > > > > > > > > > To enable this feature, exit WUHU and edit the
      > > WUHU
      > > > > > > > > > > Configuration
      > > > > > > > > > > > > Data.ini file that is located in the WUHU
      > > program
      > > > > file
      > > > > > > > > folder.
      > > > > > > > > > > > > Notepad is recommended when editing this file.
      > > Add
      > > > > the
      > > > > > > > > following
      > > > > > > > > > > > key
      > > > > > > > > > > > > to the general section of WUHU Configuration.INI
      > > in
      > > > > the
      > > > > > > > > [General
      > > > > > > > > > > > > Settings] section.
      > > > > > > > > > > > >
      > > > > > > > > > > > > Write Extended Currentdat=1
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > > > --- In
      > > > > > > > > wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > > > > > > > > <utahweatherbear@> wrote:
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > Hmmm...not sure about the "extended", but I do
      > > > > > > generate a
      > > > > > > > > > > > > currdat.lst
      > > > > > > > > > > > > > that looks like this:
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > [header]
      > > > > > > > > > > > > > programm_name="heavy weather"
      > > > > > > > > > > > > > programm_version="Ver. 2.0 beta release"
      > > > > > > > > > > > > > file_name="currdat.lst"
      > > > > > > > > > > > > > file_format_version="ver. 1.0"
      > > > > > > > > > > > > > [time]
      > > > > > > > > > > > > > start=3394888486
      > > > > > > > > > > > > > start_date_string="Tue Jul 31 10:34:46 2007"
      > > > > > > > > > > > > > last_actualisation=3394901758
      > > > > > > > > > > > > > last_actualisation_date_string="Tue Jul 31
      > > > > 14:15:58
      > > > > > > 2007"
      > > > > > > > > > > > > > next_actualisation=3394901768
      > > > > > > > > > > > > > next_actualisation_date_string="Tue Jul 31
      > > > > 14:16:08
      > > > > > > 2007"
      > > > > > > > > > > > > > [weather_picture]
      > > > > > > > > > > > > > comment_2="-1=not valid, 0=rain, 1=cloud,
      > > 2=sun"
      > > > > > > > > > > > > > number=1
      > > > > > > > > > > > > > [weather_tendency]
      > > > > > > > > > > > > > comment_1="-1=not valid, 0=no
      > > change of
      > > > > air
      > > > > > > > > > > pressure"
      > > > > > > > > > > > > > comment_2=" 1=air pressure rising, 2=air
      > > pressure
      > > > > > > falling"
      > > > > > > > > > > > > > number=1
      > > > > > > > > > > > > > [indoor_temperature]
      > > > > > > > > > > > > > deg_C="30.0"
      > > > > > > > > > > > > > deg_F="86.0"
      > > > > > > > > > > > > > [outdoor_temperature]
      > > > > > > > > > > > > > deg_C="31.8"
      > > > > > > > > > > > > > deg_F="89.3"
      > > > > > > > > > > > > > [indoor_humidity]
      > > > > > > > > > > > > > percent="49.0"
      > > > > > > > > > > > > > [outdoor_humidity]
      > > > > > > > > > > > > > percent="28.0"
      > > > > > > > > > > > > > [dewpoint]
      > > > > > > > > > > > > > deg_C="11.0"
      > > > > > > > > > > > > > deg_F="51.8"
      > > > > > > > > > > > > > [windchill]
      > > > > > > > > > > > > > deg_C="30.7"
      > > > > > > > > > > > > > deg_F="87.3"
      > > > > > > > > > > > > > [wind_speed]
      > > > > > > > > > > > > > mps="1.5"
      > > > > > > > > > > > > > kmh="5.5"
      > > > > > > > > > > > > > mph="3.4"
      > > > > > > > > > > > > > knt="3.0"
      > > > > > > > > > > > > > bft=" 1"
      > > > > > > > > > > > > > [wind_direction]
      > > > > > > > > > > > > > deg="337"
      > > > > > > > > > > > > > name="NNW"
      > > > > > > > > > > > > > [rain_total]
      > > > > > > > > > > > > > mm="0.00"
      > > > > > > > > > > > > > inch="0.000"
      > > > > > > > > > > > > > [rain_24h]
      > > > > > > > > > > > > > mm="0.00"
      > > > > > > > > > > > > > inch="0.000"
      > > > > > > > > > > > > > [rain_1h]
      > > > > > > > > > > > > > mm="0.00"
      > > > > > > > > > > > > > inch="0.000"
      > > > > > > > > > > > > > [pressure_absolute]
      > > > > > > > > > > > > > hpa="851.34"
      > > > > > > > > > > > > > inHg="25.14"
      > > > > > > > > > > > > > [pressure_relative]
      > > > > > > > > > > > > > hpa="1015.92"
      > > > > > > > > > > > > > inHg="30.00"
      > > > > > > > > > > > > > [storm_alarm]
      > > > > > > > > > > > > > comment="-1=not valid, 0=storm alarm not
      > > activ,
      > > > > > > 1=storm
      > > > > > > > > alarm
      > > > > > > > > > > > activ"
      > > > > > > > > > > > > > number=0
      > > > > > > > > > > > > > [wind_gust]
      > > > > > > > > > > > > > mps="2.4"
      > > > > > > > > > > > > > kmh="8.7"
      > > > > > > > > > > > > > mph="5.4"
      > > > > > > > > > > > > > knt="4.7"
      > > > > > > > > > > > > > bft=" 2"
      > > > > > > > > > > > > > [rain_total_tweaked]
      > > > > > > > > > > > > > mm="0.00"
      > > > > > > > > > > > > > inch="0.000"
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > Don't see any max/min temps or max wind. What
      > > am I
      > > > > > > doing
      > > > > > > > > wrong?
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > Thanx, dan
      > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > --- In
      > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > > > > > > > > > <wuhu_software@> wrote:
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > Dan,
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > If you are configured for extended
      > > currdat.lst
      > > > > > > output,
      > > > > > > > > the
      > > > > > > > > > > > highs
      > > > > > > > > > > > > > and
      > > > > > > > > > > > > > > lows are available by using %[section]var%
      > > and
      > > > > can
      > > > > > > be
      > > > > > > > > used
      > > > > > > > > > > in
      > > > > > > > > > > > > > > templates.
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > My recommendation is the save2ftp freeware.
      > > You
      > > > > can
      > > > > > > send
      > > > > > > > > > > > multiple
      > > > > > > > > > > > > > > files to servers with different conditions.
      > > It
      > > > > seems
      > > > > > > to
      > > > > > > > > work
      > > > > > > > > > > > very
      > > > > > > > > > > > > > > well.
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > --- In
      > > > > > > > > > >
      > > wuhu_software_group@yahoogroups.com, "utahweatherbear"
      > > > > > > > > > > > > > > <utahweatherbear@> wrote:
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > Heath, is there a a variable in there for
      > > a
      > > > > peak
      > > > > > > wind
      > > > > > > > > gust
      > > > > > > > > > > > for
      > > > > > > > > > > > > > the
      > > > > > > > > > > > > > > > day? Also, what would you suggest is the
      > > best
      > > > > way
      > > > > > > to
      > > > > > > > > > > > > > automatically
      > > > > > > > > > > > > > > > upload the ouput file to a website on a
      > > > > realtime
      > > > > > > > > basis? Is
      > > > > > > > > > > > that
      > > > > > > > > > > > > > > > possible with WUHU?
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > Thanx, Dan
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > --- In
      > > > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > > > > > > > > > > > <wuhu_software@> wrote:
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > Tony,
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > Assuming you are running the latest
      > > version
      > > > > that
      > > > > > > > > > > supports
      > > > > > > > > > > > > > > > templates...
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > First you need to set up an action for
      > > > > the "On
      > > > > > > > > weather
      > > > > > > > > > > > > update".
      > > > > > > > > > > > > > > Go
      > > > > > > > > > > > > > > > to
      > > > > > > > > > > > > > > > > where you enter the actions and see the
      > > > > examples
      > > > > > > at
      > > > > > > > > the
      > > > > > > > > > > > > bottom.
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > As an example, if you enter the
      > > following
      > > > > action
      > > > > > > > > (enter
      > > > > > > > > > > > > > exactly):
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > >
      > > > > > >
      > > > >
      > > template:"C:\HeavyWeather\InputTest.htm"
      "C:\HeavyWeather\OutputTest.h
      > > > > > > > > > > > > > > > > tm"
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > That will use the inputtest.htm as the
      > > input
      > > > > > > file,
      > > > > > > > > > > > > > outputtest.htm
      > > > > > > > > > > > > > > > as
      > > > > > > > > > > > > > > > > the output file. You can change the file
      > > > > names
      > > > > > > and
      > > > > > > > > paths
      > > > > > > > > > > to
      > > > > > > > > > > > > > > > whatever
      > > > > > > > > > > > > > > > > you want.
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > Within the inputtest.htm file, you can
      > > enter
      > > > > > > these
      > > > > > > > > > > strings,
      > > > > > > > > > > > > > they
      > > > > > > > > > > > > > > > will
      > > > > > > > > > > > > > > > > be replaced with the real weather data:
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > %StormAlertActive%
      > > > > > > > > > > > > > > > > %LastActualizationTime%
      > > > > > > > > > > > > > > > > %PressureFallingAlertActive%
      > > > > > > > > > > > > > > > > %PressureRisingAlertActive%
      > > > > > > > > > > > > > > > > %IndoorHumidity%
      > > > > > > > > > > > > > > > > %IndoorTempDegC%
      > > > > > > > > > > > > > > > > %IndoorTempDegF%
      > > > > > > > > > > > > > > > > %MetarSkyConditions%
      > > > > > > > > > > > > > > > > %MetarWeatherConditions%
      > > > > > > > > > > > > > > > > %OutdoorDewpointC%
      > > > > > > > > > > > > > > > > %OutdoorDewpointF%
      > > > > > > > > > > > > > > > > %OutdoorSnowDepth%
      > > > > > > > > > > > > > > > > %OutdoorHumidity%
      > > > > > > > > > > > > > > > > %OutdoorPressureAbsoluteHPA%
      > > > > > > > > > > > > > > > > %OutdoorPressureAbsoluteINHG%
      > > > > > > > > > > > > > > > > %OutdoorPressureRelativeHPA%
      > > > > > > > > > > > > > > > > %OutdoorPressureRelativeINHG%
      > > > > > > > > > > > > > > > > %OutdoorRain1HrIN%
      > > > > > > > > > > > > > > > > %OutdoorRain1HrMM%
      > > > > > > > > > > > > > > > > %OutdoorRain24HrIN%
      > > > > > > > > > > > > > > > > %OutdoorRain24HrMM%
      > > > > > > > > > > > > > > > > %OutdoorDailyRainfallIN%
      > > > > > > > > > > > > > > > > %OutdoorDailyRainfallMM%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalIN%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalMM%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalTweakedIN%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalTweakedMM%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalMonthlyIN%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalMonthlyMM%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalMonthlyTweakedMM%
      > > > > > > > > > > > > > > > > %OutdoorRainTotalMonthlyTweakedIN%
      > > > > > > > > > > > > > > > > %OutdoorTempDegC%
      > > > > > > > > > > > > > > > > %OutdoorTempDegF%
      > > > > > > > > > > > > > > > > %OutdoorWindAverageDirection%
      > > > > > > > > > > > > > > > > %OutdoorWindDirectionLetters%
      > > > > > > > > > > > > > > > > %OutdoorWindAverageSpeedKMH%
      > > > > > > > > > > > > > > > > %OutdoorWindAverageSpeedMPH%
      > > > > > > > > > > > > > > > > %OutdoorWindchillC%
      > > > > > > > > > > > > > > > > %OutdoorWindchillF%
      > > > > > > > > > > > > > > > > %OutdoorWindDirection%
      > > > > > > > > > > > > > > > > %OutdoorWindGustSpeedKMH%
      > > > > > > > > > > > > > > > > %OutdoorWindGustSpeedMPH%
      > > > > > > > > > > > > > > > > %OutdoorWindSpeedKMH%
      > > > > > > > > > > > > > > > > %OutdoorWindSpeedMPH%
      > > > > > > > > > > > > > > > > %Time%
      > > > > > > > > > > > > > > > > %TimeHHMM%
      > > > > > > > > > > > > > > > > %EuroDate%
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > --- In
      > > > > > > wuhu_software_group@yahoogroups.com, "Tony"
      > > > > > > > > > > > <is0hha@>
      > > > > > > > > > > > > > > wrote:
      > > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > > Hello all,
      > > > > > > > > > > > > > > > > > i want to create locally an HTML File
      > > with
      > > > > all
      > > > > > > > > data
      > > > > > > > > > > from
      > > > > > > > > > > > > WUHU
      > > > > > > > > > > > > > > > (Wind,
      > > > > > > > > > > > > > > > > > Temp, etc.) and then update it on my
      > > > > website
      > > > > > > with
      > > > > > > > > the
      > > > > > > > > > > > > > save2ftp.
      > > > > > > > > > > > > > > > > > This html file must be updated every
      > > > > minute or
      > > > > > > > > every 5
      > > > > > > > > > > > > > minutes.
      > > > > > > > > > > > > > > > > > Can you help me ?
      > > > > > > > > > > > > > > > > > Thanks.
      > > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > > ---------------------------------
      > > > > > > > > > > > Ready for the edge of your seat? Check out
      > > tonight's
      > > > > top
      > > > > > > picks
      > > > > > > > > on
      > > > > > > > > > > Yahoo! TV.
      > > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > >
      > > > > > > > >
      > > > > > > >
      > > > > > >
      > > > > >
      > > > >
      > > >
      > >
      >
    • wuhu_software
      John, Sorry, you cannot combine the templates with the web service right now on a single action... I did realize it would be nice to do a mix of actions, web
      Message 36 of 36 , Aug 1 10:43 AM
      • 0 Attachment
        John,

        Sorry, you cannot combine the templates with the web service right
        now on a single action... I did realize it would be nice to do a mix
        of actions, web service, and templates all on a single line. Will
        have to give that some thought. I was thinking maybe prefixing
        actions with action: and webservice with webservice: so that the line
        can be parsed.

        Maybe just specifying a file that contains a list of actions,
        templates, etc might be easier. Something like
        actionlist:c:\actionlist.txt, where each action is on a seperate line
        within the file. In that way, you could mix and match. Hm...

        For now you could play a trick, use the web service on the
        activation, use templates on the deactivation for the update (or vice
        versa). The deactivation action will always happen after the
        activation action.

        As far as the length goes, it should be able to handle at least 1024
        bytes or so. I am not sure if there is a limitation on an edit box or
        not. I would suspect there is but it is hard to say.


        --- In wuhu_software_group@yahoogroups.com, John Liss <john@...>
        wrote:
        >
        > I'm sorry if this has been asked before..
        >
        > Damn WUHU.. you have done it again. TEMPLATES! rock on.
        >
        > Q?
        >
        > In the readme it says:
        >
        > *44) Added templates. Templates will allow you to specify an input
        text
        > file and output text file. When the input file is copied to the
        output
        > file, weather data can be injected in to the output file by using
        the
        > replacement strings (%OutdoorTempDegF% for example). This would
        allow to
        > create .htm files that contain the weather data. You can specify
        > multiple templates per action.*
        >
        > *As an example, say that you specified the following as an Update
        action:*
        >
        >
        *template: "C:\HeavyWeather\InputTest.htm" "C:\HeavyWeather\OutputTest
        .htm"*
        >
        > *You can specify multiple templates like this:*
        >
        > *template:"C:\HeavyWeather\InputTest.htm"
        > "C:\HeavyWeather\OutputTest.htm"
        >
        template:"C:\HeavyWeather\InputTest2.htm" "C:\HeavyWeather\OutputTest2
        .htm"
        > *
        >
        > Question: Can you do
        >
        > http://localhost/collector.aspx?t=%OutdoorTempDegF%&h=%
        IndoorHumidity%
        > template:"C:\HeavyWeather\InputTest.htm"
        > "C:\HeavyWeather\OutputTest.htm"
        >
        template:"C:\HeavyWeather\InputTest2.htm" "C:\HeavyWeather\OutputTest2
        .htm"
        >
        > What is the max length of a line action? My collector.aspx string
        > length alone is pretty long (I'd have to count but I'd guess at
        least
        > 100 chars...)
        >
        >
        > <http://localhost/webservice/collector.aspx?t=31&h=54.2&r=0.00>*
        > * <http://localhost/webservice/collector.aspx?t=31&h=54.2&r=0.00>
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.