Loading ...
Sorry, an error occurred while loading the content.

Woot! Re: Error installing wuhu

Expand Messages
  • wuhu_software
    Kathy, I am not sure which console you have but the next few paragraphs assume you are using a WS-23XX type station. There are a couple of methods you can use
    Message 1 of 26 , Jan 1, 2007
    • 0 Attachment
      Kathy,

      I am not sure which console you have but the next few paragraphs
      assume you are using a WS-23XX type station.

      There are a couple of methods you can use to have WUHU intercept data
      from the console.

      The first is quite easy. You run Heavyweather Beta 2.0 (newer than
      the version that ships on CD), you run WUHU, it monitors a file
      called currdat.lst (stored in C:\Heavyweather). Heavweather and WUHU
      must be run at all times otherwise WUHU will not receive the
      currdat.lst file updates. That method is fine if you insist on
      running Heavyweather. Personally, I think Heavyweather is a CPU hog
      (can easily chew up 20-30% of your processor even when idle) so I do
      not run it.

      If you run wired mode (wire between the console and the remote thermo
      unit), your weather data can be updated every 10 seconds or so. In
      this case, you would probably want to run WUHU in direct serial
      communications mode. If you are running wireless mode (no wire
      between the console and remote thermo unit), your weather data will
      only be updated once per minute regardless of the software
      combination you choose.

      When you run WUHU in direct serial mode, you must terminate the
      Heavyweather application. When you choose this method, you must hit
      Stop on WUHU so you can make changes to the settings. In the general
      settings, there is a pulldown combo box. You can select "WS-23XX
      Direct Serial Access", then to the right of the combo box, select the
      communications port that the console is hooked up to. Once the
      changes are made, you hit start. WUHU will then manage the
      communications with the console.

      If you have a WS-36XX type station, WUHU does not support direct
      serial communications at this time so you must run the Heavyweather
      Pro application. Like Heavyweather Beta 2.0, this application will
      write to the currdat.lst file once per minute. As with the first
      method, Heavyweather Pro and WUHU must be running at all times.

      Well, that is the long answer. I hope things are a bit clearer now.


      --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
      <sun_spot_mom@...> wrote:
      >
      > Okay!! That worked...and interestingly IE7 still works, although
      it
      > seems slower.
      > So, now I have it installed, not sure if it's getting the readings,
      > tho. My gauges don't show anything. I did turn on logging to show
      > uploads and console comm. errors. I'm not seeing much in there as
      > yet.
      >
      > Perhaps some tips here would help?
      >
      > I will look at more again maybe tomorrow. I am tired after
      bringing
      > in the new year.
      >
      > Happy New Year!
      > Thanks for your help.
      > Kathy
      >
      > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie Bradford
      > >>>>>" <dbradford@> wrote:
      > >
      > > I had this problem a few days ago with windows 2000, I had a
      > printer
      > > installed and everytime i started WUHU it said I needed a
      printer,
      > what I
      > > did was deleted the printer, rebooted and reinstalled the printer
      > again and
      > > the reinstalled WUHU and it has not acted up since.
      > >
      > > Dickie
      > >
      > > -----Original Message-----
      > > From: wuhu_software_group@yahoogroups.com
      > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
      > sun_spot_mom
      > > Sent: Monday, January 01, 2007 8:04 PM
      > > To: wuhu_software_group@yahoogroups.com
      > > Subject: [wuhu_software_group] Re: Error installing wuhu
      > >
      > >
      > > It could all be IE7 related...
      > > When I said to go ahead and install IE7, I had problems
      > connecting.
      > > I went through all services and stuff in startup and it
      appeared
      > that
      > > my camera & printer services interfere with IE7, so I stopped
      them
      > > from loading. I will try loading them and restarting and then
      try
      > > the install again.
      > >
      > > I also did not see version 213 anywhere. I only tried 212 & 214.
      > > Where is 213?
      > >
      > > Thanks
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
      > wrote:
      > > >
      > > > I was getting the same error when WUHU would try to load at
      > Windows
      > > > startup. Never really got it resolved (thought I did, but it
      > > > returned). I figured it was just my machine. I do have a
      printer
      > > > installed...I wonder if my printer wasn't loading at startup
      > prior
      > > > to WUHU, therefore it was not recognizing it? I was using
      > version
      > > > 214.
      > > >
      > > > I actually decided to try uninstalling 214 and trying 213. The
      > > > problem seemed to go away. My other problem (serial port
      issue
      > with
      > > > console stopping communication with computer and serial port
      > > > indicating it was in use) seemed to go away when I went back
      to
      > > 213.
      > > > Can't say for sure though. I will say it has been almost a
      day
      > now
      > > > without the problems and the problems did seem to start when I
      > > > installed V214.
      > > >
      > > >
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > <wuhu_software@> wrote:
      > > > >
      > > > >
      > > > > You must have a printer defined on the machine to install
      > WUHU.
      > > > >
      > > > > Go to your control panel, click printers.
      > > > >
      > > > > If you do not have one defined, add printer.
      > > > >
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
      > > > > <sun_spot_mom@> wrote:
      > > > > >
      > > > > > Please help.
      > > > > >
      > > > > > When I run install.exe I am getting:
      > > > > > error
      > > > > > Runtime error 217 at 00021AEE
      > > > > >
      > > > > > Then:
      > > > > > WUHU setup
      > > > > > An error occurred during the move data process: -119
      > > > > >
      > > > > > Component: DLLs
      > > > > > File group: program DLLs
      > > > > > File: D:\program files\wuhu\teechart.ocx
      > > > > >
      > > > > > I have tried both versions of the download files: the 212
      &
      > 214
      > > > > > versions and I get the same messages.
      > > > > >
      > > > > > I'm trying to get my LaCrosse 2315 to upload to
      > wunderground.
      > > > > >
      > > > > > I have IE7, is that a problem?
      > > > > >
      > > > > > Thanks in advance.
      > > > > > Kathy
      > > > > >
      > > > >
      > > >
      > >
      >
    • sun_spot_mom
      I do believe that it will work now (except for a minor problem, I don t think I know my ID, duh). Where do I locate my PWS ID? I ve been looking at the member
      Message 2 of 26 , Jan 2, 2007
      • 0 Attachment
        I do believe that it will work now (except for a minor problem, I
        don't think I know my ID, duh). Where do I locate my PWS ID? I've
        been looking at the member settings and do not see it. I think its
        KIL something... I was using my "handle" for the ID.

        My gauges are showing activity. I just need to see it upload.
        The problem was during the install of wuhu I chose to install in
        d:\ . Since it asked I thought it would be okay to put it there.

        Check out the weather for 60964 coming soon!

        Thanks again.
        Kathy



        --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        <wuhu_software@...> wrote:
        >
        > Kathy,
        >
        > I am not sure which console you have but the next few paragraphs
        > assume you are using a WS-23XX type station.
        >
        > There are a couple of methods you can use to have WUHU intercept
        data
        > from the console.
        >
        > The first is quite easy. You run Heavyweather Beta 2.0 (newer than
        > the version that ships on CD), you run WUHU, it monitors a file
        > called currdat.lst (stored in C:\Heavyweather). Heavweather and
        WUHU
        > must be run at all times otherwise WUHU will not receive the
        > currdat.lst file updates. That method is fine if you insist on
        > running Heavyweather. Personally, I think Heavyweather is a CPU hog
        > (can easily chew up 20-30% of your processor even when idle) so I
        do
        > not run it.
        >
        > If you run wired mode (wire between the console and the remote
        thermo
        > unit), your weather data can be updated every 10 seconds or so. In
        > this case, you would probably want to run WUHU in direct serial
        > communications mode. If you are running wireless mode (no wire
        > between the console and remote thermo unit), your weather data will
        > only be updated once per minute regardless of the software
        > combination you choose.
        >
        > When you run WUHU in direct serial mode, you must terminate the
        > Heavyweather application. When you choose this method, you must hit
        > Stop on WUHU so you can make changes to the settings. In the
        general
        > settings, there is a pulldown combo box. You can select "WS-23XX
        > Direct Serial Access", then to the right of the combo box, select
        the
        > communications port that the console is hooked up to. Once the
        > changes are made, you hit start. WUHU will then manage the
        > communications with the console.
        >
        > If you have a WS-36XX type station, WUHU does not support direct
        > serial communications at this time so you must run the Heavyweather
        > Pro application. Like Heavyweather Beta 2.0, this application will
        > write to the currdat.lst file once per minute. As with the first
        > method, Heavyweather Pro and WUHU must be running at all times.
        >
        > Well, that is the long answer. I hope things are a bit clearer now.
        >
        >
        > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
        > <sun_spot_mom@> wrote:
        > >
        > > Okay!! That worked...and interestingly IE7 still works, although
        > it
        > > seems slower.
        > > So, now I have it installed, not sure if it's getting the
        readings,
        > > tho. My gauges don't show anything. I did turn on logging to
        show
        > > uploads and console comm. errors. I'm not seeing much in there as
        > > yet.
        > >
        > > Perhaps some tips here would help?
        > >
        > > I will look at more again maybe tomorrow. I am tired after
        > bringing
        > > in the new year.
        > >
        > > Happy New Year!
        > > Thanks for your help.
        > > Kathy
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
        Bradford
        > > >>>>>" <dbradford@> wrote:
        > > >
        > > > I had this problem a few days ago with windows 2000, I had a
        > > printer
        > > > installed and everytime i started WUHU it said I needed a
        > printer,
        > > what I
        > > > did was deleted the printer, rebooted and reinstalled the
        printer
        > > again and
        > > > the reinstalled WUHU and it has not acted up since.
        > > >
        > > > Dickie
        > > >
        > > > -----Original Message-----
        > > > From: wuhu_software_group@yahoogroups.com
        > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
        > > sun_spot_mom
        > > > Sent: Monday, January 01, 2007 8:04 PM
        > > > To: wuhu_software_group@yahoogroups.com
        > > > Subject: [wuhu_software_group] Re: Error installing wuhu
        > > >
        > > >
        > > > It could all be IE7 related...
        > > > When I said to go ahead and install IE7, I had problems
        > > connecting.
        > > > I went through all services and stuff in startup and it
        > appeared
        > > that
        > > > my camera & printer services interfere with IE7, so I stopped
        > them
        > > > from loading. I will try loading them and restarting and then
        > try
        > > > the install again.
        > > >
        > > > I also did not see version 213 anywhere. I only tried 212 &
        214.
        > > > Where is 213?
        > > >
        > > > Thanks
        > > >
        > > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
        > > wrote:
        > > > >
        > > > > I was getting the same error when WUHU would try to load at
        > > Windows
        > > > > startup. Never really got it resolved (thought I did, but it
        > > > > returned). I figured it was just my machine. I do have a
        > printer
        > > > > installed...I wonder if my printer wasn't loading at
        startup
        > > prior
        > > > > to WUHU, therefore it was not recognizing it? I was using
        > > version
        > > > > 214.
        > > > >
        > > > > I actually decided to try uninstalling 214 and trying 213.
        The
        > > > > problem seemed to go away. My other problem (serial port
        > issue
        > > with
        > > > > console stopping communication with computer and serial port
        > > > > indicating it was in use) seemed to go away when I went
        back
        > to
        > > > 213.
        > > > > Can't say for sure though. I will say it has been almost a
        > day
        > > now
        > > > > without the problems and the problems did seem to start
        when I
        > > > > installed V214.
        > > > >
        > > > >
        > > > >
        > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        > > > > <wuhu_software@> wrote:
        > > > > >
        > > > > >
        > > > > > You must have a printer defined on the machine to install
        > > WUHU.
        > > > > >
        > > > > > Go to your control panel, click printers.
        > > > > >
        > > > > > If you do not have one defined, add printer.
        > > > > >
        > > > > >
        > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
        > > > > > <sun_spot_mom@> wrote:
        > > > > > >
        > > > > > > Please help.
        > > > > > >
        > > > > > > When I run install.exe I am getting:
        > > > > > > error
        > > > > > > Runtime error 217 at 00021AEE
        > > > > > >
        > > > > > > Then:
        > > > > > > WUHU setup
        > > > > > > An error occurred during the move data process: -119
        > > > > > >
        > > > > > > Component: DLLs
        > > > > > > File group: program DLLs
        > > > > > > File: D:\program files\wuhu\teechart.ocx
        > > > > > >
        > > > > > > I have tried both versions of the download files: the
        212
        > &
        > > 214
        > > > > > > versions and I get the same messages.
        > > > > > >
        > > > > > > I'm trying to get my LaCrosse 2315 to upload to
        > > wunderground.
        > > > > > >
        > > > > > > I have IE7, is that a problem?
        > > > > > >
        > > > > > > Thanks in advance.
        > > > > > > Kathy
        > > > > > >
        > > > > >
        > > > >
        > > >
        > >
        >
      • steve_03222
        Kathy, If you click on MY Stations on the left it shoould bring you to a screen that will show your station ID. If you are logged in as a member at WU. Steve
        Message 3 of 26 , Jan 2, 2007
        • 0 Attachment
          Kathy,
          If you click on "MY Stations" on the left it shoould bring you to a
          screen that will show your station ID. If you are logged in as a
          member at WU.

          Steve
        • wuhu_software
          Kathy, Sounds like you are almost there... Go to the Weather Underground site and log in with your WU email and password. Once you are logged in, there is a
          Message 4 of 26 , Jan 2, 2007
          • 0 Attachment
            Kathy,

            Sounds like you are almost there...

            Go to the Weather Underground site and log in with your WU email and
            password.

            Once you are logged in, there is a "My Stations" link. Click it.

            On the next page you will see something like:

            Current Stations
            ID: KMI????? | data

            Your station id follows ID:

            The password entered in to WUHU is the same as you use for your
            normal WU account. It *is* case sensitive.


            --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
            <sun_spot_mom@...> wrote:
            >
            > I do believe that it will work now (except for a minor problem, I
            > don't think I know my ID, duh). Where do I locate my PWS ID? I've
            > been looking at the member settings and do not see it. I think its
            > KIL something... I was using my "handle" for the ID.
            >
            > My gauges are showing activity. I just need to see it upload.
            > The problem was during the install of wuhu I chose to install in
            > d:\ . Since it asked I thought it would be okay to put it there.
            >
            > Check out the weather for 60964 coming soon!
            >
            > Thanks again.
            > Kathy
            >
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            > <wuhu_software@> wrote:
            > >
            > > Kathy,
            > >
            > > I am not sure which console you have but the next few paragraphs
            > > assume you are using a WS-23XX type station.
            > >
            > > There are a couple of methods you can use to have WUHU intercept
            > data
            > > from the console.
            > >
            > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
            than
            > > the version that ships on CD), you run WUHU, it monitors a file
            > > called currdat.lst (stored in C:\Heavyweather). Heavweather and
            > WUHU
            > > must be run at all times otherwise WUHU will not receive the
            > > currdat.lst file updates. That method is fine if you insist on
            > > running Heavyweather. Personally, I think Heavyweather is a CPU
            hog
            > > (can easily chew up 20-30% of your processor even when idle) so I
            > do
            > > not run it.
            > >
            > > If you run wired mode (wire between the console and the remote
            > thermo
            > > unit), your weather data can be updated every 10 seconds or so.
            In
            > > this case, you would probably want to run WUHU in direct serial
            > > communications mode. If you are running wireless mode (no wire
            > > between the console and remote thermo unit), your weather data
            will
            > > only be updated once per minute regardless of the software
            > > combination you choose.
            > >
            > > When you run WUHU in direct serial mode, you must terminate the
            > > Heavyweather application. When you choose this method, you must
            hit
            > > Stop on WUHU so you can make changes to the settings. In the
            > general
            > > settings, there is a pulldown combo box. You can select "WS-23XX
            > > Direct Serial Access", then to the right of the combo box, select
            > the
            > > communications port that the console is hooked up to. Once the
            > > changes are made, you hit start. WUHU will then manage the
            > > communications with the console.
            > >
            > > If you have a WS-36XX type station, WUHU does not support direct
            > > serial communications at this time so you must run the
            Heavyweather
            > > Pro application. Like Heavyweather Beta 2.0, this application
            will
            > > write to the currdat.lst file once per minute. As with the first
            > > method, Heavyweather Pro and WUHU must be running at all times.
            > >
            > > Well, that is the long answer. I hope things are a bit clearer
            now.
            > >
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
            > > <sun_spot_mom@> wrote:
            > > >
            > > > Okay!! That worked...and interestingly IE7 still works,
            although
            > > it
            > > > seems slower.
            > > > So, now I have it installed, not sure if it's getting the
            > readings,
            > > > tho. My gauges don't show anything. I did turn on logging to
            > show
            > > > uploads and console comm. errors. I'm not seeing much in there
            as
            > > > yet.
            > > >
            > > > Perhaps some tips here would help?
            > > >
            > > > I will look at more again maybe tomorrow. I am tired after
            > > bringing
            > > > in the new year.
            > > >
            > > > Happy New Year!
            > > > Thanks for your help.
            > > > Kathy
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
            > Bradford
            > > > >>>>>" <dbradford@> wrote:
            > > > >
            > > > > I had this problem a few days ago with windows 2000, I had a
            > > > printer
            > > > > installed and everytime i started WUHU it said I needed a
            > > printer,
            > > > what I
            > > > > did was deleted the printer, rebooted and reinstalled the
            > printer
            > > > again and
            > > > > the reinstalled WUHU and it has not acted up since.
            > > > >
            > > > > Dickie
            > > > >
            > > > > -----Original Message-----
            > > > > From: wuhu_software_group@yahoogroups.com
            > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
            > > > sun_spot_mom
            > > > > Sent: Monday, January 01, 2007 8:04 PM
            > > > > To: wuhu_software_group@yahoogroups.com
            > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
            > > > >
            > > > >
            > > > > It could all be IE7 related...
            > > > > When I said to go ahead and install IE7, I had problems
            > > > connecting.
            > > > > I went through all services and stuff in startup and it
            > > appeared
            > > > that
            > > > > my camera & printer services interfere with IE7, so I
            stopped
            > > them
            > > > > from loading. I will try loading them and restarting and
            then
            > > try
            > > > > the install again.
            > > > >
            > > > > I also did not see version 213 anywhere. I only tried 212 &
            > 214.
            > > > > Where is 213?
            > > > >
            > > > > Thanks
            > > > >
            > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
            <yahoo@>
            > > > wrote:
            > > > > >
            > > > > > I was getting the same error when WUHU would try to load
            at
            > > > Windows
            > > > > > startup. Never really got it resolved (thought I did, but
            it
            > > > > > returned). I figured it was just my machine. I do have a
            > > printer
            > > > > > installed...I wonder if my printer wasn't loading at
            > startup
            > > > prior
            > > > > > to WUHU, therefore it was not recognizing it? I was using
            > > > version
            > > > > > 214.
            > > > > >
            > > > > > I actually decided to try uninstalling 214 and trying
            213.
            > The
            > > > > > problem seemed to go away. My other problem (serial port
            > > issue
            > > > with
            > > > > > console stopping communication with computer and serial
            port
            > > > > > indicating it was in use) seemed to go away when I went
            > back
            > > to
            > > > > 213.
            > > > > > Can't say for sure though. I will say it has been almost
            a
            > > day
            > > > now
            > > > > > without the problems and the problems did seem to start
            > when I
            > > > > > installed V214.
            > > > > >
            > > > > >
            > > > > >
            > > > > > --- In
            wuhu_software_group@yahoogroups.com, "wuhu_software"
            > > > > > <wuhu_software@> wrote:
            > > > > > >
            > > > > > >
            > > > > > > You must have a printer defined on the machine to
            install
            > > > WUHU.
            > > > > > >
            > > > > > > Go to your control panel, click printers.
            > > > > > >
            > > > > > > If you do not have one defined, add printer.
            > > > > > >
            > > > > > >
            > > > > > > --- In
            wuhu_software_group@yahoogroups.com, "sun_spot_mom"
            > > > > > > <sun_spot_mom@> wrote:
            > > > > > > >
            > > > > > > > Please help.
            > > > > > > >
            > > > > > > > When I run install.exe I am getting:
            > > > > > > > error
            > > > > > > > Runtime error 217 at 00021AEE
            > > > > > > >
            > > > > > > > Then:
            > > > > > > > WUHU setup
            > > > > > > > An error occurred during the move data process: -119
            > > > > > > >
            > > > > > > > Component: DLLs
            > > > > > > > File group: program DLLs
            > > > > > > > File: D:\program files\wuhu\teechart.ocx
            > > > > > > >
            > > > > > > > I have tried both versions of the download files: the
            > 212
            > > &
            > > > 214
            > > > > > > > versions and I get the same messages.
            > > > > > > >
            > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
            > > > wunderground.
            > > > > > > >
            > > > > > > > I have IE7, is that a problem?
            > > > > > > >
            > > > > > > > Thanks in advance.
            > > > > > > > Kathy
            > > > > > > >
            > > > > > >
            > > > > >
            > > > >
            > > >
            > >
            >
          • sun_spot_mom
            Steve Finally found another post with where to locate it. Sorry to have bothered you again. I m hoping this is all good to go now. Just waiting to see it
            Message 5 of 26 , Jan 2, 2007
            • 0 Attachment
              Steve
              Finally found another post with where to locate it. Sorry to have
              bothered you again.
              I'm hoping this is all good to go now. Just waiting to see it upload
              now.

              Thanks again.
              Kathy

              --- In wuhu_software_group@yahoogroups.com, "steve_03222"
              <steve_03222@...> wrote:
              >
              > Kathy,
              > If you click on "MY Stations" on the left it shoould bring you to a
              > screen that will show your station ID. If you are logged in as a
              > member at WU.
              >
              > Steve
              >
            • sun_spot_mom
              Check out the weather at 60964! Thanks much for all of your help. Kathy
              Message 6 of 26 , Jan 2, 2007
              • 0 Attachment
                Check out the weather at 60964!
                Thanks much for all of your help.

                Kathy
                --- In wuhu_software_group@yahoogroups.com, "steve_03222"
                <steve_03222@...> wrote:
                >
                > Kathy,
                > If you click on "MY Stations" on the left it shoould bring you to a
                > screen that will show your station ID. If you are logged in as a
                > member at WU.
                >
                > Steve
                >
              • sun_spot_mom
                Yes, I logged in and saw my data. Do I have to wait a day to see it when I type in my zipcode? Thanks much. ... Kathy ... and ... its ... there. ...
                Message 7 of 26 , Jan 2, 2007
                • 0 Attachment
                  Yes, I logged in and saw my data. Do I have to wait a day to see it
                  when I type in my zipcode?

                  Thanks much.
                  :>)
                  Kathy

                  --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  <wuhu_software@...> wrote:
                  >
                  >
                  > Kathy,
                  >
                  > Sounds like you are almost there...
                  >
                  > Go to the Weather Underground site and log in with your WU email
                  and
                  > password.
                  >
                  > Once you are logged in, there is a "My Stations" link. Click it.
                  >
                  > On the next page you will see something like:
                  >
                  > Current Stations
                  > ID: KMI????? | data
                  >
                  > Your station id follows ID:
                  >
                  > The password entered in to WUHU is the same as you use for your
                  > normal WU account. It *is* case sensitive.
                  >
                  >
                  > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                  > <sun_spot_mom@> wrote:
                  > >
                  > > I do believe that it will work now (except for a minor problem, I
                  > > don't think I know my ID, duh). Where do I locate my PWS ID? I've
                  > > been looking at the member settings and do not see it. I think
                  its
                  > > KIL something... I was using my "handle" for the ID.
                  > >
                  > > My gauges are showing activity. I just need to see it upload.
                  > > The problem was during the install of wuhu I chose to install in
                  > > d:\ . Since it asked I thought it would be okay to put it
                  there.
                  > >
                  > > Check out the weather for 60964 coming soon!
                  > >
                  > > Thanks again.
                  > > Kathy
                  > >
                  > >
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > <wuhu_software@> wrote:
                  > > >
                  > > > Kathy,
                  > > >
                  > > > I am not sure which console you have but the next few
                  paragraphs
                  > > > assume you are using a WS-23XX type station.
                  > > >
                  > > > There are a couple of methods you can use to have WUHU
                  intercept
                  > > data
                  > > > from the console.
                  > > >
                  > > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                  > than
                  > > > the version that ships on CD), you run WUHU, it monitors a file
                  > > > called currdat.lst (stored in C:\Heavyweather). Heavweather and
                  > > WUHU
                  > > > must be run at all times otherwise WUHU will not receive the
                  > > > currdat.lst file updates. That method is fine if you insist on
                  > > > running Heavyweather. Personally, I think Heavyweather is a CPU
                  > hog
                  > > > (can easily chew up 20-30% of your processor even when idle) so
                  I
                  > > do
                  > > > not run it.
                  > > >
                  > > > If you run wired mode (wire between the console and the remote
                  > > thermo
                  > > > unit), your weather data can be updated every 10 seconds or so.
                  > In
                  > > > this case, you would probably want to run WUHU in direct serial
                  > > > communications mode. If you are running wireless mode (no wire
                  > > > between the console and remote thermo unit), your weather data
                  > will
                  > > > only be updated once per minute regardless of the software
                  > > > combination you choose.
                  > > >
                  > > > When you run WUHU in direct serial mode, you must terminate the
                  > > > Heavyweather application. When you choose this method, you must
                  > hit
                  > > > Stop on WUHU so you can make changes to the settings. In the
                  > > general
                  > > > settings, there is a pulldown combo box. You can select "WS-
                  23XX
                  > > > Direct Serial Access", then to the right of the combo box,
                  select
                  > > the
                  > > > communications port that the console is hooked up to. Once the
                  > > > changes are made, you hit start. WUHU will then manage the
                  > > > communications with the console.
                  > > >
                  > > > If you have a WS-36XX type station, WUHU does not support
                  direct
                  > > > serial communications at this time so you must run the
                  > Heavyweather
                  > > > Pro application. Like Heavyweather Beta 2.0, this application
                  > will
                  > > > write to the currdat.lst file once per minute. As with the
                  first
                  > > > method, Heavyweather Pro and WUHU must be running at all times.
                  > > >
                  > > > Well, that is the long answer. I hope things are a bit clearer
                  > now.
                  > > >
                  > > >
                  > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                  > > > <sun_spot_mom@> wrote:
                  > > > >
                  > > > > Okay!! That worked...and interestingly IE7 still works,
                  > although
                  > > > it
                  > > > > seems slower.
                  > > > > So, now I have it installed, not sure if it's getting the
                  > > readings,
                  > > > > tho. My gauges don't show anything. I did turn on logging to
                  > > show
                  > > > > uploads and console comm. errors. I'm not seeing much in
                  there
                  > as
                  > > > > yet.
                  > > > >
                  > > > > Perhaps some tips here would help?
                  > > > >
                  > > > > I will look at more again maybe tomorrow. I am tired after
                  > > > bringing
                  > > > > in the new year.
                  > > > >
                  > > > > Happy New Year!
                  > > > > Thanks for your help.
                  > > > > Kathy
                  > > > >
                  > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                  > > Bradford
                  > > > > >>>>>" <dbradford@> wrote:
                  > > > > >
                  > > > > > I had this problem a few days ago with windows 2000, I had
                  a
                  > > > > printer
                  > > > > > installed and everytime i started WUHU it said I needed a
                  > > > printer,
                  > > > > what I
                  > > > > > did was deleted the printer, rebooted and reinstalled the
                  > > printer
                  > > > > again and
                  > > > > > the reinstalled WUHU and it has not acted up since.
                  > > > > >
                  > > > > > Dickie
                  > > > > >
                  > > > > > -----Original Message-----
                  > > > > > From: wuhu_software_group@yahoogroups.com
                  > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                  > > > > sun_spot_mom
                  > > > > > Sent: Monday, January 01, 2007 8:04 PM
                  > > > > > To: wuhu_software_group@yahoogroups.com
                  > > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                  > > > > >
                  > > > > >
                  > > > > > It could all be IE7 related...
                  > > > > > When I said to go ahead and install IE7, I had problems
                  > > > > connecting.
                  > > > > > I went through all services and stuff in startup and it
                  > > > appeared
                  > > > > that
                  > > > > > my camera & printer services interfere with IE7, so I
                  > stopped
                  > > > them
                  > > > > > from loading. I will try loading them and restarting and
                  > then
                  > > > try
                  > > > > > the install again.
                  > > > > >
                  > > > > > I also did not see version 213 anywhere. I only tried 212
                  &
                  > > 214.
                  > > > > > Where is 213?
                  > > > > >
                  > > > > > Thanks
                  > > > > >
                  > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                  > <yahoo@>
                  > > > > wrote:
                  > > > > > >
                  > > > > > > I was getting the same error when WUHU would try to
                  load
                  > at
                  > > > > Windows
                  > > > > > > startup. Never really got it resolved (thought I did,
                  but
                  > it
                  > > > > > > returned). I figured it was just my machine. I do have
                  a
                  > > > printer
                  > > > > > > installed...I wonder if my printer wasn't loading at
                  > > startup
                  > > > > prior
                  > > > > > > to WUHU, therefore it was not recognizing it? I was
                  using
                  > > > > version
                  > > > > > > 214.
                  > > > > > >
                  > > > > > > I actually decided to try uninstalling 214 and trying
                  > 213.
                  > > The
                  > > > > > > problem seemed to go away. My other problem (serial
                  port
                  > > > issue
                  > > > > with
                  > > > > > > console stopping communication with computer and serial
                  > port
                  > > > > > > indicating it was in use) seemed to go away when I went
                  > > back
                  > > > to
                  > > > > > 213.
                  > > > > > > Can't say for sure though. I will say it has been
                  almost
                  > a
                  > > > day
                  > > > > now
                  > > > > > > without the problems and the problems did seem to start
                  > > when I
                  > > > > > > installed V214.
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > > --- In
                  > wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > > > > > <wuhu_software@> wrote:
                  > > > > > > >
                  > > > > > > >
                  > > > > > > > You must have a printer defined on the machine to
                  > install
                  > > > > WUHU.
                  > > > > > > >
                  > > > > > > > Go to your control panel, click printers.
                  > > > > > > >
                  > > > > > > > If you do not have one defined, add printer.
                  > > > > > > >
                  > > > > > > >
                  > > > > > > > --- In
                  > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                  > > > > > > > <sun_spot_mom@> wrote:
                  > > > > > > > >
                  > > > > > > > > Please help.
                  > > > > > > > >
                  > > > > > > > > When I run install.exe I am getting:
                  > > > > > > > > error
                  > > > > > > > > Runtime error 217 at 00021AEE
                  > > > > > > > >
                  > > > > > > > > Then:
                  > > > > > > > > WUHU setup
                  > > > > > > > > An error occurred during the move data process: -119
                  > > > > > > > >
                  > > > > > > > > Component: DLLs
                  > > > > > > > > File group: program DLLs
                  > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                  > > > > > > > >
                  > > > > > > > > I have tried both versions of the download files:
                  the
                  > > 212
                  > > > &
                  > > > > 214
                  > > > > > > > > versions and I get the same messages.
                  > > > > > > > >
                  > > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                  > > > > wunderground.
                  > > > > > > > >
                  > > > > > > > > I have IE7, is that a problem?
                  > > > > > > > >
                  > > > > > > > > Thanks in advance.
                  > > > > > > > > Kathy
                  > > > > > > > >
                  > > > > > > >
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                • wuhu_software
                  Kathy, What is your WU Station ID? Tried looking it up by zipcode, did not see yours in there. There was another WUHU station but it has been uploading for
                  Message 8 of 26 , Jan 2, 2007
                  • 0 Attachment
                    Kathy,

                    What is your WU Station ID?

                    Tried looking it up by zipcode, did not see yours in there.

                    There was another WUHU station but it has been uploading for some
                    time.


                    --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                    <sun_spot_mom@...> wrote:
                    >
                    > Yes, I logged in and saw my data. Do I have to wait a day to see
                    it
                    > when I type in my zipcode?
                    >
                    > Thanks much.
                    > :>)
                    > Kathy
                    >
                    > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > <wuhu_software@> wrote:
                    > >
                    > >
                    > > Kathy,
                    > >
                    > > Sounds like you are almost there...
                    > >
                    > > Go to the Weather Underground site and log in with your WU email
                    > and
                    > > password.
                    > >
                    > > Once you are logged in, there is a "My Stations" link. Click it.
                    > >
                    > > On the next page you will see something like:
                    > >
                    > > Current Stations
                    > > ID: KMI????? | data
                    > >
                    > > Your station id follows ID:
                    > >
                    > > The password entered in to WUHU is the same as you use for your
                    > > normal WU account. It *is* case sensitive.
                    > >
                    > >
                    > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                    > > <sun_spot_mom@> wrote:
                    > > >
                    > > > I do believe that it will work now (except for a minor problem,
                    I
                    > > > don't think I know my ID, duh). Where do I locate my PWS ID?
                    I've
                    > > > been looking at the member settings and do not see it. I think
                    > its
                    > > > KIL something... I was using my "handle" for the ID.
                    > > >
                    > > > My gauges are showing activity. I just need to see it upload.
                    > > > The problem was during the install of wuhu I chose to install
                    in
                    > > > d:\ . Since it asked I thought it would be okay to put it
                    > there.
                    > > >
                    > > > Check out the weather for 60964 coming soon!
                    > > >
                    > > > Thanks again.
                    > > > Kathy
                    > > >
                    > > >
                    > > >
                    > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > > <wuhu_software@> wrote:
                    > > > >
                    > > > > Kathy,
                    > > > >
                    > > > > I am not sure which console you have but the next few
                    > paragraphs
                    > > > > assume you are using a WS-23XX type station.
                    > > > >
                    > > > > There are a couple of methods you can use to have WUHU
                    > intercept
                    > > > data
                    > > > > from the console.
                    > > > >
                    > > > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                    > > than
                    > > > > the version that ships on CD), you run WUHU, it monitors a
                    file
                    > > > > called currdat.lst (stored in C:\Heavyweather). Heavweather
                    and
                    > > > WUHU
                    > > > > must be run at all times otherwise WUHU will not receive the
                    > > > > currdat.lst file updates. That method is fine if you insist
                    on
                    > > > > running Heavyweather. Personally, I think Heavyweather is a
                    CPU
                    > > hog
                    > > > > (can easily chew up 20-30% of your processor even when idle)
                    so
                    > I
                    > > > do
                    > > > > not run it.
                    > > > >
                    > > > > If you run wired mode (wire between the console and the
                    remote
                    > > > thermo
                    > > > > unit), your weather data can be updated every 10 seconds or
                    so.
                    > > In
                    > > > > this case, you would probably want to run WUHU in direct
                    serial
                    > > > > communications mode. If you are running wireless mode (no
                    wire
                    > > > > between the console and remote thermo unit), your weather
                    data
                    > > will
                    > > > > only be updated once per minute regardless of the software
                    > > > > combination you choose.
                    > > > >
                    > > > > When you run WUHU in direct serial mode, you must terminate
                    the
                    > > > > Heavyweather application. When you choose this method, you
                    must
                    > > hit
                    > > > > Stop on WUHU so you can make changes to the settings. In the
                    > > > general
                    > > > > settings, there is a pulldown combo box. You can select "WS-
                    > 23XX
                    > > > > Direct Serial Access", then to the right of the combo box,
                    > select
                    > > > the
                    > > > > communications port that the console is hooked up to. Once
                    the
                    > > > > changes are made, you hit start. WUHU will then manage the
                    > > > > communications with the console.
                    > > > >
                    > > > > If you have a WS-36XX type station, WUHU does not support
                    > direct
                    > > > > serial communications at this time so you must run the
                    > > Heavyweather
                    > > > > Pro application. Like Heavyweather Beta 2.0, this application
                    > > will
                    > > > > write to the currdat.lst file once per minute. As with the
                    > first
                    > > > > method, Heavyweather Pro and WUHU must be running at all
                    times.
                    > > > >
                    > > > > Well, that is the long answer. I hope things are a bit
                    clearer
                    > > now.
                    > > > >
                    > > > >
                    > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                    > > > > <sun_spot_mom@> wrote:
                    > > > > >
                    > > > > > Okay!! That worked...and interestingly IE7 still works,
                    > > although
                    > > > > it
                    > > > > > seems slower.
                    > > > > > So, now I have it installed, not sure if it's getting the
                    > > > readings,
                    > > > > > tho. My gauges don't show anything. I did turn on logging
                    to
                    > > > show
                    > > > > > uploads and console comm. errors. I'm not seeing much in
                    > there
                    > > as
                    > > > > > yet.
                    > > > > >
                    > > > > > Perhaps some tips here would help?
                    > > > > >
                    > > > > > I will look at more again maybe tomorrow. I am tired after
                    > > > > bringing
                    > > > > > in the new year.
                    > > > > >
                    > > > > > Happy New Year!
                    > > > > > Thanks for your help.
                    > > > > > Kathy
                    > > > > >
                    > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                    > > > Bradford
                    > > > > > >>>>>" <dbradford@> wrote:
                    > > > > > >
                    > > > > > > I had this problem a few days ago with windows 2000, I
                    had
                    > a
                    > > > > > printer
                    > > > > > > installed and everytime i started WUHU it said I needed
                    a
                    > > > > printer,
                    > > > > > what I
                    > > > > > > did was deleted the printer, rebooted and reinstalled the
                    > > > printer
                    > > > > > again and
                    > > > > > > the reinstalled WUHU and it has not acted up since.
                    > > > > > >
                    > > > > > > Dickie
                    > > > > > >
                    > > > > > > -----Original Message-----
                    > > > > > > From: wuhu_software_group@yahoogroups.com
                    > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                    > > > > > sun_spot_mom
                    > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                    > > > > > > To: wuhu_software_group@yahoogroups.com
                    > > > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                    > > > > > >
                    > > > > > >
                    > > > > > > It could all be IE7 related...
                    > > > > > > When I said to go ahead and install IE7, I had problems
                    > > > > > connecting.
                    > > > > > > I went through all services and stuff in startup and it
                    > > > > appeared
                    > > > > > that
                    > > > > > > my camera & printer services interfere with IE7, so I
                    > > stopped
                    > > > > them
                    > > > > > > from loading. I will try loading them and restarting
                    and
                    > > then
                    > > > > try
                    > > > > > > the install again.
                    > > > > > >
                    > > > > > > I also did not see version 213 anywhere. I only tried
                    212
                    > &
                    > > > 214.
                    > > > > > > Where is 213?
                    > > > > > >
                    > > > > > > Thanks
                    > > > > > >
                    > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                    > > <yahoo@>
                    > > > > > wrote:
                    > > > > > > >
                    > > > > > > > I was getting the same error when WUHU would try to
                    > load
                    > > at
                    > > > > > Windows
                    > > > > > > > startup. Never really got it resolved (thought I did,
                    > but
                    > > it
                    > > > > > > > returned). I figured it was just my machine. I do
                    have
                    > a
                    > > > > printer
                    > > > > > > > installed...I wonder if my printer wasn't loading at
                    > > > startup
                    > > > > > prior
                    > > > > > > > to WUHU, therefore it was not recognizing it? I was
                    > using
                    > > > > > version
                    > > > > > > > 214.
                    > > > > > > >
                    > > > > > > > I actually decided to try uninstalling 214 and trying
                    > > 213.
                    > > > The
                    > > > > > > > problem seemed to go away. My other problem (serial
                    > port
                    > > > > issue
                    > > > > > with
                    > > > > > > > console stopping communication with computer and
                    serial
                    > > port
                    > > > > > > > indicating it was in use) seemed to go away when I
                    went
                    > > > back
                    > > > > to
                    > > > > > > 213.
                    > > > > > > > Can't say for sure though. I will say it has been
                    > almost
                    > > a
                    > > > > day
                    > > > > > now
                    > > > > > > > without the problems and the problems did seem to
                    start
                    > > > when I
                    > > > > > > > installed V214.
                    > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > > > --- In
                    > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                    > > > > > > > <wuhu_software@> wrote:
                    > > > > > > > >
                    > > > > > > > >
                    > > > > > > > > You must have a printer defined on the machine to
                    > > install
                    > > > > > WUHU.
                    > > > > > > > >
                    > > > > > > > > Go to your control panel, click printers.
                    > > > > > > > >
                    > > > > > > > > If you do not have one defined, add printer.
                    > > > > > > > >
                    > > > > > > > >
                    > > > > > > > > --- In
                    > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                    > > > > > > > > <sun_spot_mom@> wrote:
                    > > > > > > > > >
                    > > > > > > > > > Please help.
                    > > > > > > > > >
                    > > > > > > > > > When I run install.exe I am getting:
                    > > > > > > > > > error
                    > > > > > > > > > Runtime error 217 at 00021AEE
                    > > > > > > > > >
                    > > > > > > > > > Then:
                    > > > > > > > > > WUHU setup
                    > > > > > > > > > An error occurred during the move data process: -
                    119
                    > > > > > > > > >
                    > > > > > > > > > Component: DLLs
                    > > > > > > > > > File group: program DLLs
                    > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                    > > > > > > > > >
                    > > > > > > > > > I have tried both versions of the download files:
                    > the
                    > > > 212
                    > > > > &
                    > > > > > 214
                    > > > > > > > > > versions and I get the same messages.
                    > > > > > > > > >
                    > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                    > > > > > wunderground.
                    > > > > > > > > >
                    > > > > > > > > > I have IE7, is that a problem?
                    > > > > > > > > >
                    > > > > > > > > > Thanks in advance.
                    > > > > > > > > > Kathy
                    > > > > > > > > >
                    > > > > > > > >
                    > > > > > > >
                    > > > > > >
                    > > > > >
                    > > > >
                    > > >
                    > >
                    >
                  • sun_spot_mom
                    I am KILSAINT2. Thanks for checking. I guess I am supposed to be able to look it up by zipcode, right? Thanks Kathy ... see ... email ... it. ... your ...
                    Message 9 of 26 , Jan 3, 2007
                    • 0 Attachment
                      I am KILSAINT2.

                      Thanks for checking. I guess I am supposed to be able to look it up
                      by zipcode, right?

                      Thanks
                      Kathy

                      --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      <wuhu_software@...> wrote:
                      >
                      >
                      > Kathy,
                      >
                      > What is your WU Station ID?
                      >
                      > Tried looking it up by zipcode, did not see yours in there.
                      >
                      > There was another WUHU station but it has been uploading for some
                      > time.
                      >
                      >
                      > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > <sun_spot_mom@> wrote:
                      > >
                      > > Yes, I logged in and saw my data. Do I have to wait a day to
                      see
                      > it
                      > > when I type in my zipcode?
                      > >
                      > > Thanks much.
                      > > :>)
                      > > Kathy
                      > >
                      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > <wuhu_software@> wrote:
                      > > >
                      > > >
                      > > > Kathy,
                      > > >
                      > > > Sounds like you are almost there...
                      > > >
                      > > > Go to the Weather Underground site and log in with your WU
                      email
                      > > and
                      > > > password.
                      > > >
                      > > > Once you are logged in, there is a "My Stations" link. Click
                      it.
                      > > >
                      > > > On the next page you will see something like:
                      > > >
                      > > > Current Stations
                      > > > ID: KMI????? | data
                      > > >
                      > > > Your station id follows ID:
                      > > >
                      > > > The password entered in to WUHU is the same as you use for
                      your
                      > > > normal WU account. It *is* case sensitive.
                      > > >
                      > > >
                      > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > > <sun_spot_mom@> wrote:
                      > > > >
                      > > > > I do believe that it will work now (except for a minor
                      problem,
                      > I
                      > > > > don't think I know my ID, duh). Where do I locate my PWS ID?
                      > I've
                      > > > > been looking at the member settings and do not see it. I
                      think
                      > > its
                      > > > > KIL something... I was using my "handle" for the ID.
                      > > > >
                      > > > > My gauges are showing activity. I just need to see it
                      upload.
                      > > > > The problem was during the install of wuhu I chose to
                      install
                      > in
                      > > > > d:\ . Since it asked I thought it would be okay to put it
                      > > there.
                      > > > >
                      > > > > Check out the weather for 60964 coming soon!
                      > > > >
                      > > > > Thanks again.
                      > > > > Kathy
                      > > > >
                      > > > >
                      > > > >
                      > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > > > <wuhu_software@> wrote:
                      > > > > >
                      > > > > > Kathy,
                      > > > > >
                      > > > > > I am not sure which console you have but the next few
                      > > paragraphs
                      > > > > > assume you are using a WS-23XX type station.
                      > > > > >
                      > > > > > There are a couple of methods you can use to have WUHU
                      > > intercept
                      > > > > data
                      > > > > > from the console.
                      > > > > >
                      > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                      (newer
                      > > > than
                      > > > > > the version that ships on CD), you run WUHU, it monitors a
                      > file
                      > > > > > called currdat.lst (stored in C:\Heavyweather).
                      Heavweather
                      > and
                      > > > > WUHU
                      > > > > > must be run at all times otherwise WUHU will not receive
                      the
                      > > > > > currdat.lst file updates. That method is fine if you
                      insist
                      > on
                      > > > > > running Heavyweather. Personally, I think Heavyweather is
                      a
                      > CPU
                      > > > hog
                      > > > > > (can easily chew up 20-30% of your processor even when
                      idle)
                      > so
                      > > I
                      > > > > do
                      > > > > > not run it.
                      > > > > >
                      > > > > > If you run wired mode (wire between the console and the
                      > remote
                      > > > > thermo
                      > > > > > unit), your weather data can be updated every 10 seconds
                      or
                      > so.
                      > > > In
                      > > > > > this case, you would probably want to run WUHU in direct
                      > serial
                      > > > > > communications mode. If you are running wireless mode (no
                      > wire
                      > > > > > between the console and remote thermo unit), your weather
                      > data
                      > > > will
                      > > > > > only be updated once per minute regardless of the software
                      > > > > > combination you choose.
                      > > > > >
                      > > > > > When you run WUHU in direct serial mode, you must
                      terminate
                      > the
                      > > > > > Heavyweather application. When you choose this method, you
                      > must
                      > > > hit
                      > > > > > Stop on WUHU so you can make changes to the settings. In
                      the
                      > > > > general
                      > > > > > settings, there is a pulldown combo box. You can
                      select "WS-
                      > > 23XX
                      > > > > > Direct Serial Access", then to the right of the combo box,
                      > > select
                      > > > > the
                      > > > > > communications port that the console is hooked up to. Once
                      > the
                      > > > > > changes are made, you hit start. WUHU will then manage the
                      > > > > > communications with the console.
                      > > > > >
                      > > > > > If you have a WS-36XX type station, WUHU does not support
                      > > direct
                      > > > > > serial communications at this time so you must run the
                      > > > Heavyweather
                      > > > > > Pro application. Like Heavyweather Beta 2.0, this
                      application
                      > > > will
                      > > > > > write to the currdat.lst file once per minute. As with the
                      > > first
                      > > > > > method, Heavyweather Pro and WUHU must be running at all
                      > times.
                      > > > > >
                      > > > > > Well, that is the long answer. I hope things are a bit
                      > clearer
                      > > > now.
                      > > > > >
                      > > > > >
                      > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > > > > <sun_spot_mom@> wrote:
                      > > > > > >
                      > > > > > > Okay!! That worked...and interestingly IE7 still works,
                      > > > although
                      > > > > > it
                      > > > > > > seems slower.
                      > > > > > > So, now I have it installed, not sure if it's getting
                      the
                      > > > > readings,
                      > > > > > > tho. My gauges don't show anything. I did turn on
                      logging
                      > to
                      > > > > show
                      > > > > > > uploads and console comm. errors. I'm not seeing much in
                      > > there
                      > > > as
                      > > > > > > yet.
                      > > > > > >
                      > > > > > > Perhaps some tips here would help?
                      > > > > > >
                      > > > > > > I will look at more again maybe tomorrow. I am tired
                      after
                      > > > > > bringing
                      > > > > > > in the new year.
                      > > > > > >
                      > > > > > > Happy New Year!
                      > > > > > > Thanks for your help.
                      > > > > > > Kathy
                      > > > > > >
                      > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                      Dickie
                      > > > > Bradford
                      > > > > > > >>>>>" <dbradford@> wrote:
                      > > > > > > >
                      > > > > > > > I had this problem a few days ago with windows 2000,
                      I
                      > had
                      > > a
                      > > > > > > printer
                      > > > > > > > installed and everytime i started WUHU it said I
                      needed
                      > a
                      > > > > > printer,
                      > > > > > > what I
                      > > > > > > > did was deleted the printer, rebooted and reinstalled
                      the
                      > > > > printer
                      > > > > > > again and
                      > > > > > > > the reinstalled WUHU and it has not acted up since.
                      > > > > > > >
                      > > > > > > > Dickie
                      > > > > > > >
                      > > > > > > > -----Original Message-----
                      > > > > > > > From: wuhu_software_group@yahoogroups.com
                      > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf
                      Of
                      > > > > > > sun_spot_mom
                      > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                      > > > > > > > To: wuhu_software_group@yahoogroups.com
                      > > > > > > > Subject: [wuhu_software_group] Re: Error installing
                      wuhu
                      > > > > > > >
                      > > > > > > >
                      > > > > > > > It could all be IE7 related...
                      > > > > > > > When I said to go ahead and install IE7, I had
                      problems
                      > > > > > > connecting.
                      > > > > > > > I went through all services and stuff in startup and
                      it
                      > > > > > appeared
                      > > > > > > that
                      > > > > > > > my camera & printer services interfere with IE7, so
                      I
                      > > > stopped
                      > > > > > them
                      > > > > > > > from loading. I will try loading them and restarting
                      > and
                      > > > then
                      > > > > > try
                      > > > > > > > the install again.
                      > > > > > > >
                      > > > > > > > I also did not see version 213 anywhere. I only
                      tried
                      > 212
                      > > &
                      > > > > 214.
                      > > > > > > > Where is 213?
                      > > > > > > >
                      > > > > > > > Thanks
                      > > > > > > >
                      > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                      > > > <yahoo@>
                      > > > > > > wrote:
                      > > > > > > > >
                      > > > > > > > > I was getting the same error when WUHU would try
                      to
                      > > load
                      > > > at
                      > > > > > > Windows
                      > > > > > > > > startup. Never really got it resolved (thought I
                      did,
                      > > but
                      > > > it
                      > > > > > > > > returned). I figured it was just my machine. I do
                      > have
                      > > a
                      > > > > > printer
                      > > > > > > > > installed...I wonder if my printer wasn't loading
                      at
                      > > > > startup
                      > > > > > > prior
                      > > > > > > > > to WUHU, therefore it was not recognizing it? I
                      was
                      > > using
                      > > > > > > version
                      > > > > > > > > 214.
                      > > > > > > > >
                      > > > > > > > > I actually decided to try uninstalling 214 and
                      trying
                      > > > 213.
                      > > > > The
                      > > > > > > > > problem seemed to go away. My other problem
                      (serial
                      > > port
                      > > > > > issue
                      > > > > > > with
                      > > > > > > > > console stopping communication with computer and
                      > serial
                      > > > port
                      > > > > > > > > indicating it was in use) seemed to go away when I
                      > went
                      > > > > back
                      > > > > > to
                      > > > > > > > 213.
                      > > > > > > > > Can't say for sure though. I will say it has been
                      > > almost
                      > > > a
                      > > > > > day
                      > > > > > > now
                      > > > > > > > > without the problems and the problems did seem to
                      > start
                      > > > > when I
                      > > > > > > > > installed V214.
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > > --- In
                      > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > > > > > > > <wuhu_software@> wrote:
                      > > > > > > > > >
                      > > > > > > > > >
                      > > > > > > > > > You must have a printer defined on the machine
                      to
                      > > > install
                      > > > > > > WUHU.
                      > > > > > > > > >
                      > > > > > > > > > Go to your control panel, click printers.
                      > > > > > > > > >
                      > > > > > > > > > If you do not have one defined, add printer.
                      > > > > > > > > >
                      > > > > > > > > >
                      > > > > > > > > > --- In
                      > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > > > > > > > > <sun_spot_mom@> wrote:
                      > > > > > > > > > >
                      > > > > > > > > > > Please help.
                      > > > > > > > > > >
                      > > > > > > > > > > When I run install.exe I am getting:
                      > > > > > > > > > > error
                      > > > > > > > > > > Runtime error 217 at 00021AEE
                      > > > > > > > > > >
                      > > > > > > > > > > Then:
                      > > > > > > > > > > WUHU setup
                      > > > > > > > > > > An error occurred during the move data
                      process: -
                      > 119
                      > > > > > > > > > >
                      > > > > > > > > > > Component: DLLs
                      > > > > > > > > > > File group: program DLLs
                      > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                      > > > > > > > > > >
                      > > > > > > > > > > I have tried both versions of the download
                      files:
                      > > the
                      > > > > 212
                      > > > > > &
                      > > > > > > 214
                      > > > > > > > > > > versions and I get the same messages.
                      > > > > > > > > > >
                      > > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload
                      to
                      > > > > > > wunderground.
                      > > > > > > > > > >
                      > > > > > > > > > > I have IE7, is that a problem?
                      > > > > > > > > > >
                      > > > > > > > > > > Thanks in advance.
                      > > > > > > > > > > Kathy
                      > > > > > > > > > >
                      > > > > > > > > >
                      > > > > > > > >
                      > > > > > > >
                      > > > > > >
                      > > > > >
                      > > > >
                      > > >
                      > >
                      >
                    • wuhu_software
                      Kathy, I can see your data but you are right, it is not coming up when zip code is listed. I would check under the My Stations link at the Weather
                      Message 10 of 26 , Jan 3, 2007
                      • 0 Attachment
                        Kathy,

                        I can see your data but you are right, it is not coming up when zip
                        code is listed.

                        I would check under the 'My Stations' link at the Weather Underground
                        page and verify that your zip code, city and state are entered
                        correctly there.

                        If everything is entered correctly and the it does not show up by
                        tomorrow, we will need to contact Weather Underground to resolve it.


                        --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        <sun_spot_mom@...> wrote:
                        >
                        > I am KILSAINT2.
                        >
                        > Thanks for checking. I guess I am supposed to be able to look it
                        up
                        > by zipcode, right?
                        >
                        > Thanks
                        > Kathy
                        >
                        > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > <wuhu_software@> wrote:
                        > >
                        > >
                        > > Kathy,
                        > >
                        > > What is your WU Station ID?
                        > >
                        > > Tried looking it up by zipcode, did not see yours in there.
                        > >
                        > > There was another WUHU station but it has been uploading for some
                        > > time.
                        > >
                        > >
                        > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > <sun_spot_mom@> wrote:
                        > > >
                        > > > Yes, I logged in and saw my data. Do I have to wait a day to
                        > see
                        > > it
                        > > > when I type in my zipcode?
                        > > >
                        > > > Thanks much.
                        > > > :>)
                        > > > Kathy
                        > > >
                        > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > > > <wuhu_software@> wrote:
                        > > > >
                        > > > >
                        > > > > Kathy,
                        > > > >
                        > > > > Sounds like you are almost there...
                        > > > >
                        > > > > Go to the Weather Underground site and log in with your WU
                        > email
                        > > > and
                        > > > > password.
                        > > > >
                        > > > > Once you are logged in, there is a "My Stations" link. Click
                        > it.
                        > > > >
                        > > > > On the next page you will see something like:
                        > > > >
                        > > > > Current Stations
                        > > > > ID: KMI????? | data
                        > > > >
                        > > > > Your station id follows ID:
                        > > > >
                        > > > > The password entered in to WUHU is the same as you use for
                        > your
                        > > > > normal WU account. It *is* case sensitive.
                        > > > >
                        > > > >
                        > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > > > <sun_spot_mom@> wrote:
                        > > > > >
                        > > > > > I do believe that it will work now (except for a minor
                        > problem,
                        > > I
                        > > > > > don't think I know my ID, duh). Where do I locate my PWS
                        ID?
                        > > I've
                        > > > > > been looking at the member settings and do not see it. I
                        > think
                        > > > its
                        > > > > > KIL something... I was using my "handle" for the ID.
                        > > > > >
                        > > > > > My gauges are showing activity. I just need to see it
                        > upload.
                        > > > > > The problem was during the install of wuhu I chose to
                        > install
                        > > in
                        > > > > > d:\ . Since it asked I thought it would be okay to put it
                        > > > there.
                        > > > > >
                        > > > > > Check out the weather for 60964 coming soon!
                        > > > > >
                        > > > > > Thanks again.
                        > > > > > Kathy
                        > > > > >
                        > > > > >
                        > > > > >
                        > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > > > > > <wuhu_software@> wrote:
                        > > > > > >
                        > > > > > > Kathy,
                        > > > > > >
                        > > > > > > I am not sure which console you have but the next few
                        > > > paragraphs
                        > > > > > > assume you are using a WS-23XX type station.
                        > > > > > >
                        > > > > > > There are a couple of methods you can use to have WUHU
                        > > > intercept
                        > > > > > data
                        > > > > > > from the console.
                        > > > > > >
                        > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                        > (newer
                        > > > > than
                        > > > > > > the version that ships on CD), you run WUHU, it monitors
                        a
                        > > file
                        > > > > > > called currdat.lst (stored in C:\Heavyweather).
                        > Heavweather
                        > > and
                        > > > > > WUHU
                        > > > > > > must be run at all times otherwise WUHU will not receive
                        > the
                        > > > > > > currdat.lst file updates. That method is fine if you
                        > insist
                        > > on
                        > > > > > > running Heavyweather. Personally, I think Heavyweather is
                        > a
                        > > CPU
                        > > > > hog
                        > > > > > > (can easily chew up 20-30% of your processor even when
                        > idle)
                        > > so
                        > > > I
                        > > > > > do
                        > > > > > > not run it.
                        > > > > > >
                        > > > > > > If you run wired mode (wire between the console and the
                        > > remote
                        > > > > > thermo
                        > > > > > > unit), your weather data can be updated every 10 seconds
                        > or
                        > > so.
                        > > > > In
                        > > > > > > this case, you would probably want to run WUHU in direct
                        > > serial
                        > > > > > > communications mode. If you are running wireless mode (no
                        > > wire
                        > > > > > > between the console and remote thermo unit), your weather
                        > > data
                        > > > > will
                        > > > > > > only be updated once per minute regardless of the
                        software
                        > > > > > > combination you choose.
                        > > > > > >
                        > > > > > > When you run WUHU in direct serial mode, you must
                        > terminate
                        > > the
                        > > > > > > Heavyweather application. When you choose this method,
                        you
                        > > must
                        > > > > hit
                        > > > > > > Stop on WUHU so you can make changes to the settings. In
                        > the
                        > > > > > general
                        > > > > > > settings, there is a pulldown combo box. You can
                        > select "WS-
                        > > > 23XX
                        > > > > > > Direct Serial Access", then to the right of the combo
                        box,
                        > > > select
                        > > > > > the
                        > > > > > > communications port that the console is hooked up to.
                        Once
                        > > the
                        > > > > > > changes are made, you hit start. WUHU will then manage
                        the
                        > > > > > > communications with the console.
                        > > > > > >
                        > > > > > > If you have a WS-36XX type station, WUHU does not support
                        > > > direct
                        > > > > > > serial communications at this time so you must run the
                        > > > > Heavyweather
                        > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                        > application
                        > > > > will
                        > > > > > > write to the currdat.lst file once per minute. As with
                        the
                        > > > first
                        > > > > > > method, Heavyweather Pro and WUHU must be running at all
                        > > times.
                        > > > > > >
                        > > > > > > Well, that is the long answer. I hope things are a bit
                        > > clearer
                        > > > > now.
                        > > > > > >
                        > > > > > >
                        > > > > > > --- In
                        wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > > > > > <sun_spot_mom@> wrote:
                        > > > > > > >
                        > > > > > > > Okay!! That worked...and interestingly IE7 still
                        works,
                        > > > > although
                        > > > > > > it
                        > > > > > > > seems slower.
                        > > > > > > > So, now I have it installed, not sure if it's getting
                        > the
                        > > > > > readings,
                        > > > > > > > tho. My gauges don't show anything. I did turn on
                        > logging
                        > > to
                        > > > > > show
                        > > > > > > > uploads and console comm. errors. I'm not seeing much
                        in
                        > > > there
                        > > > > as
                        > > > > > > > yet.
                        > > > > > > >
                        > > > > > > > Perhaps some tips here would help?
                        > > > > > > >
                        > > > > > > > I will look at more again maybe tomorrow. I am tired
                        > after
                        > > > > > > bringing
                        > > > > > > > in the new year.
                        > > > > > > >
                        > > > > > > > Happy New Year!
                        > > > > > > > Thanks for your help.
                        > > > > > > > Kathy
                        > > > > > > >
                        > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                        > Dickie
                        > > > > > Bradford
                        > > > > > > > >>>>>" <dbradford@> wrote:
                        > > > > > > > >
                        > > > > > > > > I had this problem a few days ago with windows 2000,
                        > I
                        > > had
                        > > > a
                        > > > > > > > printer
                        > > > > > > > > installed and everytime i started WUHU it said I
                        > needed
                        > > a
                        > > > > > > printer,
                        > > > > > > > what I
                        > > > > > > > > did was deleted the printer, rebooted and reinstalled
                        > the
                        > > > > > printer
                        > > > > > > > again and
                        > > > > > > > > the reinstalled WUHU and it has not acted up since.
                        > > > > > > > >
                        > > > > > > > > Dickie
                        > > > > > > > >
                        > > > > > > > > -----Original Message-----
                        > > > > > > > > From: wuhu_software_group@yahoogroups.com
                        > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf
                        > Of
                        > > > > > > > sun_spot_mom
                        > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                        > > > > > > > > To: wuhu_software_group@yahoogroups.com
                        > > > > > > > > Subject: [wuhu_software_group] Re: Error installing
                        > wuhu
                        > > > > > > > >
                        > > > > > > > >
                        > > > > > > > > It could all be IE7 related...
                        > > > > > > > > When I said to go ahead and install IE7, I had
                        > problems
                        > > > > > > > connecting.
                        > > > > > > > > I went through all services and stuff in startup
                        and
                        > it
                        > > > > > > appeared
                        > > > > > > > that
                        > > > > > > > > my camera & printer services interfere with IE7, so
                        > I
                        > > > > stopped
                        > > > > > > them
                        > > > > > > > > from loading. I will try loading them and
                        restarting
                        > > and
                        > > > > then
                        > > > > > > try
                        > > > > > > > > the install again.
                        > > > > > > > >
                        > > > > > > > > I also did not see version 213 anywhere. I only
                        > tried
                        > > 212
                        > > > &
                        > > > > > 214.
                        > > > > > > > > Where is 213?
                        > > > > > > > >
                        > > > > > > > > Thanks
                        > > > > > > > >
                        > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                        > > > > <yahoo@>
                        > > > > > > > wrote:
                        > > > > > > > > >
                        > > > > > > > > > I was getting the same error when WUHU would try
                        > to
                        > > > load
                        > > > > at
                        > > > > > > > Windows
                        > > > > > > > > > startup. Never really got it resolved (thought I
                        > did,
                        > > > but
                        > > > > it
                        > > > > > > > > > returned). I figured it was just my machine. I do
                        > > have
                        > > > a
                        > > > > > > printer
                        > > > > > > > > > installed...I wonder if my printer wasn't loading
                        > at
                        > > > > > startup
                        > > > > > > > prior
                        > > > > > > > > > to WUHU, therefore it was not recognizing it? I
                        > was
                        > > > using
                        > > > > > > > version
                        > > > > > > > > > 214.
                        > > > > > > > > >
                        > > > > > > > > > I actually decided to try uninstalling 214 and
                        > trying
                        > > > > 213.
                        > > > > > The
                        > > > > > > > > > problem seemed to go away. My other problem
                        > (serial
                        > > > port
                        > > > > > > issue
                        > > > > > > > with
                        > > > > > > > > > console stopping communication with computer and
                        > > serial
                        > > > > port
                        > > > > > > > > > indicating it was in use) seemed to go away when
                        I
                        > > went
                        > > > > > back
                        > > > > > > to
                        > > > > > > > > 213.
                        > > > > > > > > > Can't say for sure though. I will say it has been
                        > > > almost
                        > > > > a
                        > > > > > > day
                        > > > > > > > now
                        > > > > > > > > > without the problems and the problems did seem to
                        > > start
                        > > > > > when I
                        > > > > > > > > > installed V214.
                        > > > > > > > > >
                        > > > > > > > > >
                        > > > > > > > > >
                        > > > > > > > > > --- In
                        > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > > > > > > > > > <wuhu_software@> wrote:
                        > > > > > > > > > >
                        > > > > > > > > > >
                        > > > > > > > > > > You must have a printer defined on the machine
                        > to
                        > > > > install
                        > > > > > > > WUHU.
                        > > > > > > > > > >
                        > > > > > > > > > > Go to your control panel, click printers.
                        > > > > > > > > > >
                        > > > > > > > > > > If you do not have one defined, add printer.
                        > > > > > > > > > >
                        > > > > > > > > > >
                        > > > > > > > > > > --- In
                        > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > > > > > > > > > <sun_spot_mom@> wrote:
                        > > > > > > > > > > >
                        > > > > > > > > > > > Please help.
                        > > > > > > > > > > >
                        > > > > > > > > > > > When I run install.exe I am getting:
                        > > > > > > > > > > > error
                        > > > > > > > > > > > Runtime error 217 at 00021AEE
                        > > > > > > > > > > >
                        > > > > > > > > > > > Then:
                        > > > > > > > > > > > WUHU setup
                        > > > > > > > > > > > An error occurred during the move data
                        > process: -
                        > > 119
                        > > > > > > > > > > >
                        > > > > > > > > > > > Component: DLLs
                        > > > > > > > > > > > File group: program DLLs
                        > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                        > > > > > > > > > > >
                        > > > > > > > > > > > I have tried both versions of the download
                        > files:
                        > > > the
                        > > > > > 212
                        > > > > > > &
                        > > > > > > > 214
                        > > > > > > > > > > > versions and I get the same messages.
                        > > > > > > > > > > >
                        > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload
                        > to
                        > > > > > > > wunderground.
                        > > > > > > > > > > >
                        > > > > > > > > > > > I have IE7, is that a problem?
                        > > > > > > > > > > >
                        > > > > > > > > > > > Thanks in advance.
                        > > > > > > > > > > > Kathy
                        > > > > > > > > > > >
                        > > > > > > > > > >
                        > > > > > > > > >
                        > > > > > > > >
                        > > > > > > >
                        > > > > > >
                        > > > > >
                        > > > >
                        > > >
                        > >
                        >
                      • sun_spot_mom
                        Okay, I checked and I changed Saint to St. (maybe it likes that better?) How long should it take to show up? Thanks Kathy ... zip ... Underground ... it. ...
                        Message 11 of 26 , Jan 3, 2007
                        • 0 Attachment
                          Okay, I checked and I changed Saint to St. (maybe it likes that
                          better?) How long should it take to show up?

                          Thanks
                          Kathy

                          --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                          <wuhu_software@...> wrote:
                          >
                          > Kathy,
                          >
                          > I can see your data but you are right, it is not coming up when
                          zip
                          > code is listed.
                          >
                          > I would check under the 'My Stations' link at the Weather
                          Underground
                          > page and verify that your zip code, city and state are entered
                          > correctly there.
                          >
                          > If everything is entered correctly and the it does not show up by
                          > tomorrow, we will need to contact Weather Underground to resolve
                          it.
                          >
                          >
                          > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > <sun_spot_mom@> wrote:
                          > >
                          > > I am KILSAINT2.
                          > >
                          > > Thanks for checking. I guess I am supposed to be able to look
                          it
                          > up
                          > > by zipcode, right?
                          > >
                          > > Thanks
                          > > Kathy
                          > >
                          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > <wuhu_software@> wrote:
                          > > >
                          > > >
                          > > > Kathy,
                          > > >
                          > > > What is your WU Station ID?
                          > > >
                          > > > Tried looking it up by zipcode, did not see yours in there.
                          > > >
                          > > > There was another WUHU station but it has been uploading for
                          some
                          > > > time.
                          > > >
                          > > >
                          > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > <sun_spot_mom@> wrote:
                          > > > >
                          > > > > Yes, I logged in and saw my data. Do I have to wait a day
                          to
                          > > see
                          > > > it
                          > > > > when I type in my zipcode?
                          > > > >
                          > > > > Thanks much.
                          > > > > :>)
                          > > > > Kathy
                          > > > >
                          > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > > > <wuhu_software@> wrote:
                          > > > > >
                          > > > > >
                          > > > > > Kathy,
                          > > > > >
                          > > > > > Sounds like you are almost there...
                          > > > > >
                          > > > > > Go to the Weather Underground site and log in with your WU
                          > > email
                          > > > > and
                          > > > > > password.
                          > > > > >
                          > > > > > Once you are logged in, there is a "My Stations" link.
                          Click
                          > > it.
                          > > > > >
                          > > > > > On the next page you will see something like:
                          > > > > >
                          > > > > > Current Stations
                          > > > > > ID: KMI????? | data
                          > > > > >
                          > > > > > Your station id follows ID:
                          > > > > >
                          > > > > > The password entered in to WUHU is the same as you use for
                          > > your
                          > > > > > normal WU account. It *is* case sensitive.
                          > > > > >
                          > > > > >
                          > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > > > <sun_spot_mom@> wrote:
                          > > > > > >
                          > > > > > > I do believe that it will work now (except for a minor
                          > > problem,
                          > > > I
                          > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                          > ID?
                          > > > I've
                          > > > > > > been looking at the member settings and do not see it.
                          I
                          > > think
                          > > > > its
                          > > > > > > KIL something... I was using my "handle" for the ID.
                          > > > > > >
                          > > > > > > My gauges are showing activity. I just need to see it
                          > > upload.
                          > > > > > > The problem was during the install of wuhu I chose to
                          > > install
                          > > > in
                          > > > > > > d:\ . Since it asked I thought it would be okay to put
                          it
                          > > > > there.
                          > > > > > >
                          > > > > > > Check out the weather for 60964 coming soon!
                          > > > > > >
                          > > > > > > Thanks again.
                          > > > > > > Kathy
                          > > > > > >
                          > > > > > >
                          > > > > > >
                          > > > > > > --- In
                          wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > > > > > <wuhu_software@> wrote:
                          > > > > > > >
                          > > > > > > > Kathy,
                          > > > > > > >
                          > > > > > > > I am not sure which console you have but the next few
                          > > > > paragraphs
                          > > > > > > > assume you are using a WS-23XX type station.
                          > > > > > > >
                          > > > > > > > There are a couple of methods you can use to have WUHU
                          > > > > intercept
                          > > > > > > data
                          > > > > > > > from the console.
                          > > > > > > >
                          > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                          > > (newer
                          > > > > > than
                          > > > > > > > the version that ships on CD), you run WUHU, it
                          monitors
                          > a
                          > > > file
                          > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                          > > Heavweather
                          > > > and
                          > > > > > > WUHU
                          > > > > > > > must be run at all times otherwise WUHU will not
                          receive
                          > > the
                          > > > > > > > currdat.lst file updates. That method is fine if you
                          > > insist
                          > > > on
                          > > > > > > > running Heavyweather. Personally, I think Heavyweather
                          is
                          > > a
                          > > > CPU
                          > > > > > hog
                          > > > > > > > (can easily chew up 20-30% of your processor even when
                          > > idle)
                          > > > so
                          > > > > I
                          > > > > > > do
                          > > > > > > > not run it.
                          > > > > > > >
                          > > > > > > > If you run wired mode (wire between the console and
                          the
                          > > > remote
                          > > > > > > thermo
                          > > > > > > > unit), your weather data can be updated every 10
                          seconds
                          > > or
                          > > > so.
                          > > > > > In
                          > > > > > > > this case, you would probably want to run WUHU in
                          direct
                          > > > serial
                          > > > > > > > communications mode. If you are running wireless mode
                          (no
                          > > > wire
                          > > > > > > > between the console and remote thermo unit), your
                          weather
                          > > > data
                          > > > > > will
                          > > > > > > > only be updated once per minute regardless of the
                          > software
                          > > > > > > > combination you choose.
                          > > > > > > >
                          > > > > > > > When you run WUHU in direct serial mode, you must
                          > > terminate
                          > > > the
                          > > > > > > > Heavyweather application. When you choose this method,
                          > you
                          > > > must
                          > > > > > hit
                          > > > > > > > Stop on WUHU so you can make changes to the settings.
                          In
                          > > the
                          > > > > > > general
                          > > > > > > > settings, there is a pulldown combo box. You can
                          > > select "WS-
                          > > > > 23XX
                          > > > > > > > Direct Serial Access", then to the right of the combo
                          > box,
                          > > > > select
                          > > > > > > the
                          > > > > > > > communications port that the console is hooked up to.
                          > Once
                          > > > the
                          > > > > > > > changes are made, you hit start. WUHU will then manage
                          > the
                          > > > > > > > communications with the console.
                          > > > > > > >
                          > > > > > > > If you have a WS-36XX type station, WUHU does not
                          support
                          > > > > direct
                          > > > > > > > serial communications at this time so you must run the
                          > > > > > Heavyweather
                          > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                          > > application
                          > > > > > will
                          > > > > > > > write to the currdat.lst file once per minute. As with
                          > the
                          > > > > first
                          > > > > > > > method, Heavyweather Pro and WUHU must be running at
                          all
                          > > > times.
                          > > > > > > >
                          > > > > > > > Well, that is the long answer. I hope things are a bit
                          > > > clearer
                          > > > > > now.
                          > > > > > > >
                          > > > > > > >
                          > > > > > > > --- In
                          > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > > > > > <sun_spot_mom@> wrote:
                          > > > > > > > >
                          > > > > > > > > Okay!! That worked...and interestingly IE7 still
                          > works,
                          > > > > > although
                          > > > > > > > it
                          > > > > > > > > seems slower.
                          > > > > > > > > So, now I have it installed, not sure if it's
                          getting
                          > > the
                          > > > > > > readings,
                          > > > > > > > > tho. My gauges don't show anything. I did turn on
                          > > logging
                          > > > to
                          > > > > > > show
                          > > > > > > > > uploads and console comm. errors. I'm not seeing
                          much
                          > in
                          > > > > there
                          > > > > > as
                          > > > > > > > > yet.
                          > > > > > > > >
                          > > > > > > > > Perhaps some tips here would help?
                          > > > > > > > >
                          > > > > > > > > I will look at more again maybe tomorrow. I am
                          tired
                          > > after
                          > > > > > > > bringing
                          > > > > > > > > in the new year.
                          > > > > > > > >
                          > > > > > > > > Happy New Year!
                          > > > > > > > > Thanks for your help.
                          > > > > > > > > Kathy
                          > > > > > > > >
                          > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                          > > Dickie
                          > > > > > > Bradford
                          > > > > > > > > >>>>>" <dbradford@> wrote:
                          > > > > > > > > >
                          > > > > > > > > > I had this problem a few days ago with windows
                          2000,
                          > > I
                          > > > had
                          > > > > a
                          > > > > > > > > printer
                          > > > > > > > > > installed and everytime i started WUHU it said I
                          > > needed
                          > > > a
                          > > > > > > > printer,
                          > > > > > > > > what I
                          > > > > > > > > > did was deleted the printer, rebooted and
                          reinstalled
                          > > the
                          > > > > > > printer
                          > > > > > > > > again and
                          > > > > > > > > > the reinstalled WUHU and it has not acted up
                          since.
                          > > > > > > > > >
                          > > > > > > > > > Dickie
                          > > > > > > > > >
                          > > > > > > > > > -----Original Message-----
                          > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                          > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                          Behalf
                          > > Of
                          > > > > > > > > sun_spot_mom
                          > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                          > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                          > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                          installing
                          > > wuhu
                          > > > > > > > > >
                          > > > > > > > > >
                          > > > > > > > > > It could all be IE7 related...
                          > > > > > > > > > When I said to go ahead and install IE7, I had
                          > > problems
                          > > > > > > > > connecting.
                          > > > > > > > > > I went through all services and stuff in startup
                          > and
                          > > it
                          > > > > > > > appeared
                          > > > > > > > > that
                          > > > > > > > > > my camera & printer services interfere with IE7,
                          so
                          > > I
                          > > > > > stopped
                          > > > > > > > them
                          > > > > > > > > > from loading. I will try loading them and
                          > restarting
                          > > > and
                          > > > > > then
                          > > > > > > > try
                          > > > > > > > > > the install again.
                          > > > > > > > > >
                          > > > > > > > > > I also did not see version 213 anywhere. I only
                          > > tried
                          > > > 212
                          > > > > &
                          > > > > > > 214.
                          > > > > > > > > > Where is 213?
                          > > > > > > > > >
                          > > > > > > > > > Thanks
                          > > > > > > > > >
                          > > > > > > > > > --- In
                          wuhu_software_group@yahoogroups.com, "Brian"
                          > > > > > <yahoo@>
                          > > > > > > > > wrote:
                          > > > > > > > > > >
                          > > > > > > > > > > I was getting the same error when WUHU would
                          try
                          > > to
                          > > > > load
                          > > > > > at
                          > > > > > > > > Windows
                          > > > > > > > > > > startup. Never really got it resolved (thought
                          I
                          > > did,
                          > > > > but
                          > > > > > it
                          > > > > > > > > > > returned). I figured it was just my machine. I
                          do
                          > > > have
                          > > > > a
                          > > > > > > > printer
                          > > > > > > > > > > installed...I wonder if my printer wasn't
                          loading
                          > > at
                          > > > > > > startup
                          > > > > > > > > prior
                          > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                          I
                          > > was
                          > > > > using
                          > > > > > > > > version
                          > > > > > > > > > > 214.
                          > > > > > > > > > >
                          > > > > > > > > > > I actually decided to try uninstalling 214 and
                          > > trying
                          > > > > > 213.
                          > > > > > > The
                          > > > > > > > > > > problem seemed to go away. My other problem
                          > > (serial
                          > > > > port
                          > > > > > > > issue
                          > > > > > > > > with
                          > > > > > > > > > > console stopping communication with computer
                          and
                          > > > serial
                          > > > > > port
                          > > > > > > > > > > indicating it was in use) seemed to go away
                          when
                          > I
                          > > > went
                          > > > > > > back
                          > > > > > > > to
                          > > > > > > > > > 213.
                          > > > > > > > > > > Can't say for sure though. I will say it has
                          been
                          > > > > almost
                          > > > > > a
                          > > > > > > > day
                          > > > > > > > > now
                          > > > > > > > > > > without the problems and the problems did seem
                          to
                          > > > start
                          > > > > > > when I
                          > > > > > > > > > > installed V214.
                          > > > > > > > > > >
                          > > > > > > > > > >
                          > > > > > > > > > >
                          > > > > > > > > > > --- In
                          > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > > > > > > > > > <wuhu_software@> wrote:
                          > > > > > > > > > > >
                          > > > > > > > > > > >
                          > > > > > > > > > > > You must have a printer defined on the
                          machine
                          > > to
                          > > > > > install
                          > > > > > > > > WUHU.
                          > > > > > > > > > > >
                          > > > > > > > > > > > Go to your control panel, click printers.
                          > > > > > > > > > > >
                          > > > > > > > > > > > If you do not have one defined, add printer.
                          > > > > > > > > > > >
                          > > > > > > > > > > >
                          > > > > > > > > > > > --- In
                          > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > > > > > > > > > <sun_spot_mom@> wrote:
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > Please help.
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > When I run install.exe I am getting:
                          > > > > > > > > > > > > error
                          > > > > > > > > > > > > Runtime error 217 at 00021AEE
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > Then:
                          > > > > > > > > > > > > WUHU setup
                          > > > > > > > > > > > > An error occurred during the move data
                          > > process: -
                          > > > 119
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > Component: DLLs
                          > > > > > > > > > > > > File group: program DLLs
                          > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > I have tried both versions of the download
                          > > files:
                          > > > > the
                          > > > > > > 212
                          > > > > > > > &
                          > > > > > > > > 214
                          > > > > > > > > > > > > versions and I get the same messages.
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                          upload
                          > > to
                          > > > > > > > > wunderground.
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > I have IE7, is that a problem?
                          > > > > > > > > > > > >
                          > > > > > > > > > > > > Thanks in advance.
                          > > > > > > > > > > > > Kathy
                          > > > > > > > > > > > >
                          > > > > > > > > > > >
                          > > > > > > > > > >
                          > > > > > > > > >
                          > > > > > > > >
                          > > > > > > >
                          > > > > > >
                          > > > > >
                          > > > >
                          > > >
                          > >
                          >
                        • wuhu_software
                          Kathy, I think I have found the problem. Your latitude and longitude numbers entered in the My Stations page at WU may not be correct. The are actually
                          Message 12 of 26 , Jan 3, 2007
                          • 0 Attachment

                            Kathy,

                            I think I have found the problem.

                            Your latitude and longitude numbers entered in the 'My Stations' page at WU may not be correct. The are actually pointing to Dearing, Kansas.

                            If I pull up the forecast page for Saint Anne, Illinois:

                            http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Saint+Anne%2C+IL#History

                            The station is not listed.

                            I can pull up the station history:

                            http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=KILSAINT2

                            When I click the 'View Full Conditions and Forecast' on the history page, I end up here:

                            http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                            I believe the latitude and longitude entered for the station are not correct.

                            Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                            Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )

                            A quick way to get your latitude and longitude is to pull up:

                            http://terraserver.homeadvisor.msn.com

                            Enter your street address, city and state. When you git go you can chose either the topo or aerial map. Choose topo.

                            When the next screen is displayed, the URL at the top will look something like this:

                            http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700...

                            Get the numbers that are associated with Alon and ALat

                            So the data you would need is:

                            Lat: 42.52875700

                            Lon: -83.79587400

                            Once you have the correct numbers, copy and paste them in the 'My Stations' page back at Weather Underground.

                            ---

                            To John,

                            What is interesting to note here is that when you pull up the page:

                            http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                            There are stations listed from all over the country.

                            I suspect that there is a default latitude and longitude being loaded in the 'My Stations' new user signup??

                            ---

                            --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom" <sun_spot_mom@...> wrote:
                            >
                            > Okay, I checked and I changed Saint to St. (maybe it likes that
                            > better?) How long should it take to show up?
                            >
                            > Thanks
                            > Kathy
                            >
                            > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > wuhu_software@ wrote:
                            > >
                            > > Kathy,
                            > >
                            > > I can see your data but you are right, it is not coming up when
                            > zip
                            > > code is listed.
                            > >
                            > > I would check under the 'My Stations' link at the Weather
                            > Underground
                            > > page and verify that your zip code, city and state are entered
                            > > correctly there.
                            > >
                            > > If everything is entered correctly and the it does not show up by
                            > > tomorrow, we will need to contact Weather Underground to resolve
                            > it.
                            > >
                            > >
                            > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > <sun_spot_mom@> wrote:
                            > > >
                            > > > I am KILSAINT2.
                            > > >
                            > > > Thanks for checking. I guess I am supposed to be able to look
                            > it
                            > > up
                            > > > by zipcode, right?
                            > > >
                            > > > Thanks
                            > > > Kathy
                            > > >
                            > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > <wuhu_software@> wrote:
                            > > > >
                            > > > >
                            > > > > Kathy,
                            > > > >
                            > > > > What is your WU Station ID?
                            > > > >
                            > > > > Tried looking it up by zipcode, did not see yours in there.
                            > > > >
                            > > > > There was another WUHU station but it has been uploading for
                            > some
                            > > > > time.
                            > > > >
                            > > > >
                            > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > <sun_spot_mom@> wrote:
                            > > > > >
                            > > > > > Yes, I logged in and saw my data. Do I have to wait a day
                            > to
                            > > > see
                            > > > > it
                            > > > > > when I type in my zipcode?
                            > > > > >
                            > > > > > Thanks much.
                            > > > > > :>)
                            > > > > > Kathy
                            > > > > >
                            > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > > > <wuhu_software@> wrote:
                            > > > > > >
                            > > > > > >
                            > > > > > > Kathy,
                            > > > > > >
                            > > > > > > Sounds like you are almost there...
                            > > > > > >
                            > > > > > > Go to the Weather Underground site and log in with your WU
                            > > > email
                            > > > > > and
                            > > > > > > password.
                            > > > > > >
                            > > > > > > Once you are logged in, there is a "My Stations" link.
                            > Click
                            > > > it.
                            > > > > > >
                            > > > > > > On the next page you will see something like:
                            > > > > > >
                            > > > > > > Current Stations
                            > > > > > > ID: KMI????? | data
                            > > > > > >
                            > > > > > > Your station id follows ID:
                            > > > > > >
                            > > > > > > The password entered in to WUHU is the same as you use for
                            > > > your
                            > > > > > > normal WU account. It *is* case sensitive.
                            > > > > > >
                            > > > > > >
                            > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > > > <sun_spot_mom@> wrote:
                            > > > > > > >
                            > > > > > > > I do believe that it will work now (except for a minor
                            > > > problem,
                            > > > > I
                            > > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                            > > ID?
                            > > > > I've
                            > > > > > > > been looking at the member settings and do not see it.
                            > I
                            > > > think
                            > > > > > its
                            > > > > > > > KIL something... I was using my "handle" for the ID.
                            > > > > > > >
                            > > > > > > > My gauges are showing activity. I just need to see it
                            > > > upload.
                            > > > > > > > The problem was during the install of wuhu I chose to
                            > > > install
                            > > > > in
                            > > > > > > > d:\ . Since it asked I thought it would be okay to put
                            > it
                            > > > > > there.
                            > > > > > > >
                            > > > > > > > Check out the weather for 60964 coming soon!
                            > > > > > > >
                            > > > > > > > Thanks again.
                            > > > > > > > Kathy
                            > > > > > > >
                            > > > > > > >
                            > > > > > > >
                            > > > > > > > --- In
                            > wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > > > > > <wuhu_software@> wrote:
                            > > > > > > > >
                            > > > > > > > > Kathy,
                            > > > > > > > >
                            > > > > > > > > I am not sure which console you have but the next few
                            > > > > > paragraphs
                            > > > > > > > > assume you are using a WS-23XX type station.
                            > > > > > > > >
                            > > > > > > > > There are a couple of methods you can use to have WUHU
                            > > > > > intercept
                            > > > > > > > data
                            > > > > > > > > from the console.
                            > > > > > > > >
                            > > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                            > > > (newer
                            > > > > > > than
                            > > > > > > > > the version that ships on CD), you run WUHU, it
                            > monitors
                            > > a
                            > > > > file
                            > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                            > > > Heavweather
                            > > > > and
                            > > > > > > > WUHU
                            > > > > > > > > must be run at all times otherwise WUHU will not
                            > receive
                            > > > the
                            > > > > > > > > currdat.lst file updates. That method is fine if you
                            > > > insist
                            > > > > on
                            > > > > > > > > running Heavyweather. Personally, I think Heavyweather
                            > is
                            > > > a
                            > > > > CPU
                            > > > > > > hog
                            > > > > > > > > (can easily chew up 20-30% of your processor even when
                            > > > idle)
                            > > > > so
                            > > > > > I
                            > > > > > > > do
                            > > > > > > > > not run it.
                            > > > > > > > >
                            > > > > > > > > If you run wired mode (wire between the console and
                            > the
                            > > > > remote
                            > > > > > > > thermo
                            > > > > > > > > unit), your weather data can be updated every 10
                            > seconds
                            > > > or
                            > > > > so.
                            > > > > > > In
                            > > > > > > > > this case, you would probably want to run WUHU in
                            > direct
                            > > > > serial
                            > > > > > > > > communications mode. If you are running wireless mode
                            > (no
                            > > > > wire
                            > > > > > > > > between the console and remote thermo unit), your
                            > weather
                            > > > > data
                            > > > > > > will
                            > > > > > > > > only be updated once per minute regardless of the
                            > > software
                            > > > > > > > > combination you choose.
                            > > > > > > > >
                            > > > > > > > > When you run WUHU in direct serial mode, you must
                            > > > terminate
                            > > > > the
                            > > > > > > > > Heavyweather application. When you choose this method,
                            > > you
                            > > > > must
                            > > > > > > hit
                            > > > > > > > > Stop on WUHU so you can make changes to the settings.
                            > In
                            > > > the
                            > > > > > > > general
                            > > > > > > > > settings, there is a pulldown combo box. You can
                            > > > select "WS-
                            > > > > > 23XX
                            > > > > > > > > Direct Serial Access", then to the right of the combo
                            > > box,
                            > > > > > select
                            > > > > > > > the
                            > > > > > > > > communications port that the console is hooked up to.
                            > > Once
                            > > > > the
                            > > > > > > > > changes are made, you hit start. WUHU will then manage
                            > > the
                            > > > > > > > > communications with the console.
                            > > > > > > > >
                            > > > > > > > > If you have a WS-36XX type station, WUHU does not
                            > support
                            > > > > > direct
                            > > > > > > > > serial communications at this time so you must run the
                            > > > > > > Heavyweather
                            > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                            > > > application
                            > > > > > > will
                            > > > > > > > > write to the currdat.lst file once per minute. As with
                            > > the
                            > > > > > first
                            > > > > > > > > method, Heavyweather Pro and WUHU must be running at
                            > all
                            > > > > times.
                            > > > > > > > >
                            > > > > > > > > Well, that is the long answer. I hope things are a bit
                            > > > > clearer
                            > > > > > > now.
                            > > > > > > > >
                            > > > > > > > >
                            > > > > > > > > --- In
                            > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > > > > > <sun_spot_mom@> wrote:
                            > > > > > > > > >
                            > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                            > > works,
                            > > > > > > although
                            > > > > > > > > it
                            > > > > > > > > > seems slower.
                            > > > > > > > > > So, now I have it installed, not sure if it's
                            > getting
                            > > > the
                            > > > > > > > readings,
                            > > > > > > > > > tho. My gauges don't show anything. I did turn on
                            > > > logging
                            > > > > to
                            > > > > > > > show
                            > > > > > > > > > uploads and console comm. errors. I'm not seeing
                            > much
                            > > in
                            > > > > > there
                            > > > > > > as
                            > > > > > > > > > yet.
                            > > > > > > > > >
                            > > > > > > > > > Perhaps some tips here would help?
                            > > > > > > > > >
                            > > > > > > > > > I will look at more again maybe tomorrow. I am
                            > tired
                            > > > after
                            > > > > > > > > bringing
                            > > > > > > > > > in the new year.
                            > > > > > > > > >
                            > > > > > > > > > Happy New Year!
                            > > > > > > > > > Thanks for your help.
                            > > > > > > > > > Kathy
                            > > > > > > > > >
                            > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                            > > > Dickie
                            > > > > > > > Bradford
                            > > > > > > > > > >>>>>" <dbradford@> wrote:
                            > > > > > > > > > >
                            > > > > > > > > > > I had this problem a few days ago with windows
                            > 2000,
                            > > > I
                            > > > > had
                            > > > > > a
                            > > > > > > > > > printer
                            > > > > > > > > > > installed and everytime i started WUHU it said I
                            > > > needed
                            > > > > a
                            > > > > > > > > printer,
                            > > > > > > > > > what I
                            > > > > > > > > > > did was deleted the printer, rebooted and
                            > reinstalled
                            > > > the
                            > > > > > > > printer
                            > > > > > > > > > again and
                            > > > > > > > > > > the reinstalled WUHU and it has not acted up
                            > since.
                            > > > > > > > > > >
                            > > > > > > > > > > Dickie
                            > > > > > > > > > >
                            > > > > > > > > > > -----Original Message-----
                            > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                            > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                            > Behalf
                            > > > Of
                            > > > > > > > > > sun_spot_mom
                            > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                            > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                            > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                            > installing
                            > > > wuhu
                            > > > > > > > > > >
                            > > > > > > > > > >
                            > > > > > > > > > > It could all be IE7 related...
                            > > > > > > > > > > When I said to go ahead and install IE7, I had
                            > > > problems
                            > > > > > > > > > connecting.
                            > > > > > > > > > > I went through all services and stuff in startup
                            > > and
                            > > > it
                            > > > > > > > > appeared
                            > > > > > > > > > that
                            > > > > > > > > > > my camera & printer services interfere with IE7,
                            > so
                            > > > I
                            > > > > > > stopped
                            > > > > > > > > them
                            > > > > > > > > > > from loading. I will try loading them and
                            > > restarting
                            > > > > and
                            > > > > > > then
                            > > > > > > > > try
                            > > > > > > > > > > the install again.
                            > > > > > > > > > >
                            > > > > > > > > > > I also did not see version 213 anywhere. I only
                            > > > tried
                            > > > > 212
                            > > > > > &
                            > > > > > > > 214.
                            > > > > > > > > > > Where is 213?
                            > > > > > > > > > >
                            > > > > > > > > > > Thanks
                            > > > > > > > > > >
                            > > > > > > > > > > --- In
                            > wuhu_software_group@yahoogroups.com, "Brian"
                            > > > > > > <yahoo@>
                            > > > > > > > > > wrote:
                            > > > > > > > > > > >
                            > > > > > > > > > > > I was getting the same error when WUHU would
                            > try
                            > > > to
                            > > > > > load
                            > > > > > > at
                            > > > > > > > > > Windows
                            > > > > > > > > > > > startup. Never really got it resolved (thought
                            > I
                            > > > did,
                            > > > > > but
                            > > > > > > it
                            > > > > > > > > > > > returned). I figured it was just my machine. I
                            > do
                            > > > > have
                            > > > > > a
                            > > > > > > > > printer
                            > > > > > > > > > > > installed...I wonder if my printer wasn't
                            > loading
                            > > > at
                            > > > > > > > startup
                            > > > > > > > > > prior
                            > > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                            > I
                            > > > was
                            > > > > > using
                            > > > > > > > > > version
                            > > > > > > > > > > > 214.
                            > > > > > > > > > > >
                            > > > > > > > > > > > I actually decided to try uninstalling 214 and
                            > > > trying
                            > > > > > > 213.
                            > > > > > > > The
                            > > > > > > > > > > > problem seemed to go away. My other problem
                            > > > (serial
                            > > > > > port
                            > > > > > > > > issue
                            > > > > > > > > > with
                            > > > > > > > > > > > console stopping communication with computer
                            > and
                            > > > > serial
                            > > > > > > port
                            > > > > > > > > > > > indicating it was in use) seemed to go away
                            > when
                            > > I
                            > > > > went
                            > > > > > > > back
                            > > > > > > > > to
                            > > > > > > > > > > 213.
                            > > > > > > > > > > > Can't say for sure though. I will say it has
                            > been
                            > > > > > almost
                            > > > > > > a
                            > > > > > > > > day
                            > > > > > > > > > now
                            > > > > > > > > > > > without the problems and the problems did seem
                            > to
                            > > > > start
                            > > > > > > > when I
                            > > > > > > > > > > > installed V214.
                            > > > > > > > > > > >
                            > > > > > > > > > > >
                            > > > > > > > > > > >
                            > > > > > > > > > > > --- In
                            > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > > > > > > > > > <wuhu_software@> wrote:
                            > > > > > > > > > > > >
                            > > > > > > > > > > > >
                            > > > > > > > > > > > > You must have a printer defined on the
                            > machine
                            > > > to
                            > > > > > > install
                            > > > > > > > > > WUHU.
                            > > > > > > > > > > > >
                            > > > > > > > > > > > > Go to your control panel, click printers.
                            > > > > > > > > > > > >
                            > > > > > > > > > > > > If you do not have one defined, add printer.
                            > > > > > > > > > > > >
                            > > > > > > > > > > > >
                            > > > > > > > > > > > > --- In
                            > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > > > > > > > > > <sun_spot_mom@> wrote:
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > Please help.
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > When I run install.exe I am getting:
                            > > > > > > > > > > > > > error
                            > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > Then:
                            > > > > > > > > > > > > > WUHU setup
                            > > > > > > > > > > > > > An error occurred during the move data
                            > > > process: -
                            > > > > 119
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > Component: DLLs
                            > > > > > > > > > > > > > File group: program DLLs
                            > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > I have tried both versions of the download
                            > > > files:
                            > > > > > the
                            > > > > > > > 212
                            > > > > > > > > &
                            > > > > > > > > > 214
                            > > > > > > > > > > > > > versions and I get the same messages.
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                            > upload
                            > > > to
                            > > > > > > > > > wunderground.
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > I have IE7, is that a problem?
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > > > Thanks in advance.
                            > > > > > > > > > > > > > Kathy
                            > > > > > > > > > > > > >
                            > > > > > > > > > > > >
                            > > > > > > > > > > >
                            > > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > >
                            > > > > > > >
                            > > > > > >
                            > > > > >
                            > > > >
                            > > >
                            > >
                            >

                          • John Celenza
                            Hello :-) Sounds like you re on the right track. You can test which city your station is nearest to by taking the lat and lon from the Weather Station History
                            Message 13 of 26 , Jan 3, 2007
                            • 0 Attachment
                              Hello :-)

                              Sounds like you're on the right track.

                              You can test which city your station is nearest to by taking the lat and lon from the Weather Station History page and entering it into the "Fast Forecast" box with "lat,lon".  You have to use the decimal version (the one in parentheses) with no degree symbol like:

                              37.062,-95.677

                              When I tried this, I also got Dearing Kansas.

                              When you change your lat/lon for the station in "My Stations", it will take until tomorrow morning for your station to appear on the correct St. Anne pages.  This is because our databases have to update.

                              -John

                              On 1/3/07, wuhu_software <wuhu_software@...> wrote:

                              Kathy,

                              I think I have found the problem.

                              Your latitude and longitude numbers entered in the 'My Stations' page at WU may not be correct. The are actually pointing to Dearing, Kansas.

                              If I pull up the forecast page for Saint Anne, Illinois:

                              http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Saint+Anne%2C+IL#History

                              The station is not listed.

                              I can pull up the station history:

                              http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=KILSAINT2

                              When I click the 'View Full Conditions and Forecast' on the history page, I end up here:

                              http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                              I believe the latitude and longitude entered for the station are not correct.

                              Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                              Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )

                              A quick way to get your latitude and longitude is to pull up:

                              http://terraserver.homeadvisor.msn.com

                              Enter your street address, city and state. When you git go you can chose either the topo or aerial map. Choose topo.

                              When the next screen is displayed, the URL at the top will look something like this:

                              http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon= -83.79587400&ALat=42.52875700...

                              Get the numbers that are associated with Alon and ALat

                              So the data you would need is:

                              Lat: 42.52875700

                              Lon: -83.79587400

                              Once you have the correct numbers, copy and paste them in the 'My Stations' page back at Weather Underground.

                              ---

                              To John,

                              What is interesting to note here is that when you pull up the page:

                              http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                              There are stations listed from all over the country.

                              I suspect that there is a default latitude and longitude being loaded in the 'My Stations' new user signup??

                              ---

                              --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom" <sun_spot_mom@...> wrote:
                              >
                              > Okay, I checked and I changed Saint to St. (maybe it likes that
                              > better?) How long should it take to show up?
                              >
                              > Thanks
                              > Kathy
                              >
                              > --- In wuhu_software_group@yahoogroup s.com, "wuhu_software"
                              > wuhu_software@ wrote:
                              > >
                              > > Kathy,
                              > >
                              > > I can see your data but you are right, it is not coming up when
                              > zip
                              > > code is listed.
                              > >
                              > > I would check under the 'My Stations' link at the Weather
                              > Underground
                              > > page and verify that your zip code, city and state are entered
                              > > correctly there.
                              > >
                              > > If everything is entered correctly and the it does not show up by
                              > > tomorrow, we will need to contact Weather Underground to resolve
                              > it.
                              > >
                              > >
                              > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > <sun_spot_mom@> wrote:
                              > > >
                              > > > I am KILSAINT2.
                              > > >
                              > > > Thanks for checking. I guess I am supposed to be able to look
                              > it
                              > > up
                              > > > by zipcode, right?
                              > > >
                              > > > Thanks
                              > > > Kathy
                              > > >
                              > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > <wuhu_software@> wrote:
                              > > > >
                              > > > >
                              > > > > Kathy,
                              > > > >
                              > > > > What is your WU Station ID?
                              > > > >
                              > > > > Tried looking it up by zipcode, did not see yours in there.
                              > > > >
                              > > > > There was another WUHU station but it has been uploading for
                              > some
                              > > > > time.
                              > > > >
                              > > > >
                              > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > > <sun_spot_mom@> wrote:
                              > > > > >
                              > > > > > Yes, I logged in and saw my data. Do I have to wait a day
                              > to
                              > > > see
                              > > > > it
                              > > > > > when I type in my zipcode?
                              > > > > >
                              > > > > > Thanks much.
                              > > > > > :>)
                              > > > > > Kathy
                              > > > > >
                              > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > > > <wuhu_software@> wrote:
                              > > > > > >
                              > > > > > >
                              > > > > > > Kathy,
                              > > > > > >
                              > > > > > > Sounds like you are almost there...
                              > > > > > >
                              > > > > > > Go to the Weather Underground site and log in with your WU
                              > > > email
                              > > > > > and
                              > > > > > > password.
                              > > > > > >
                              > > > > > > Once you are logged in, there is a "My Stations" link.
                              > Click
                              > > > it.
                              > > > > > >
                              > > > > > > On the next page you will see something like:
                              > > > > > >
                              > > > > > > Current Stations
                              > > > > > > ID: KMI????? | data
                              > > > > > >
                              > > > > > > Your station id follows ID:
                              > > > > > >
                              > > > > > > The password entered in to WUHU is the same as you use for
                              > > > your
                              > > > > > > normal WU account. It *is* case sensitive.
                              > > > > > >
                              > > > > > >
                              > > > > > > --- In wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                              > > > > > > <sun_spot_mom@> wrote:
                              > > > > > > >
                              > > > > > > > I do believe that it will work now (except for a minor
                              > > > problem,
                              > > > > I
                              > > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                              > > ID?
                              > > > > I've
                              > > > > > > > been looking at the member settings and do not see it.
                              > I
                              > > > think
                              > > > > > its
                              > > > > > > > KIL something... I was using my "handle" for the ID.
                              > > > > > > >
                              > > > > > > > My gauges are showing activity. I just need to see it
                              > > > upload.
                              > > > > > > > The problem was during the install of wuhu I chose to
                              > > > install
                              > > > > in
                              > > > > > > > d:\ . Since it asked I thought it would be okay to put
                              > it
                              > > > > > there.
                              > > > > > > >
                              > > > > > > > Check out the weather for 60964 coming soon!
                              > > > > > > >
                              > > > > > > > Thanks again.
                              > > > > > > > Kathy
                              > > > > > > >
                              > > > > > > >
                              > > > > > > >
                              > > > > > > > --- In
                              > wuhu_software_group@yahoogroup s.com, "wuhu_software"
                              > > > > > > > <wuhu_software@> wrote:
                              > > > > > > > >
                              > > > > > > > > Kathy,
                              > > > > > > > >
                              > > > > > > > > I am not sure which console you have but the next few
                              > > > > > paragraphs
                              > > > > > > > > assume you are using a WS-23XX type station.
                              > > > > > > > >
                              > > > > > > > > There are a couple of methods you can use to have WUHU
                              > > > > > intercept
                              > > > > > > > data
                              > > > > > > > > from the console.
                              > > > > > > > >
                              > > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                              > > > (newer
                              > > > > > > than
                              > > > > > > > > the version that ships on CD), you run WUHU, it
                              > monitors
                              > > a
                              > > > > file
                              > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                              > > > Heavweather
                              > > > > and
                              > > > > > > > WUHU
                              > > > > > > > > must be run at all times otherwise WUHU will not
                              > receive
                              > > > the
                              > > > > > > > > currdat.lst file updates. That method is fine if you
                              > > > insist
                              > > > > on
                              > > > > > > > > running Heavyweather. Personally, I think Heavyweather
                              > is
                              > > > a
                              > > > > CPU
                              > > > > > > hog
                              > > > > > > > > (can easily chew up 20-30% of your processor even when
                              > > > idle)
                              > > > > so
                              > > > > > I
                              > > > > > > > do
                              > > > > > > > > not run it.
                              > > > > > > > >
                              > > > > > > > > If you run wired mode (wire between the console and
                              > the
                              > > > > remote
                              > > > > > > > thermo
                              > > > > > > > > unit), your weather data can be updated every 10
                              > seconds
                              > > > or
                              > > > > so.
                              > > > > > > In
                              > > > > > > > > this case, you would probably want to run WUHU in
                              > direct
                              > > > > serial
                              > > > > > > > > communications mode. If you are running wireless mode
                              > (no
                              > > > > wire
                              > > > > > > > > between the console and remote thermo unit), your
                              > weather
                              > > > > data
                              > > > > > > will
                              > > > > > > > > only be updated once per minute regardless of the
                              > > software
                              > > > > > > > > combination you choose.
                              > > > > > > > >
                              > > > > > > > > When you run WUHU in direct serial mode, you must
                              > > > terminate
                              > > > > the
                              > > > > > > > > Heavyweather application. When you choose this method,
                              > > you
                              > > > > must
                              > > > > > > hit
                              > > > > > > > > Stop on WUHU so you can make changes to the settings.
                              > In
                              > > > the
                              > > > > > > > general
                              > > > > > > > > settings, there is a pulldown combo box. You can
                              > > > select "WS-
                              > > > > > 23XX
                              > > > > > > > > Direct Serial Access", then to the right of the combo
                              > > box,
                              > > > > > select
                              > > > > > > > the
                              > > > > > > > > communications port that the console is hooked up to.
                              > > Once
                              > > > > the
                              > > > > > > > > changes are made, you hit start. WUHU will then manage
                              > > the
                              > > > > > > > > communications with the console.
                              > > > > > > > >
                              > > > > > > > > If you have a WS-36XX type station, WUHU does not
                              > support
                              > > > > > direct
                              > > > > > > > > serial communications at this time so you must run the
                              > > > > > > Heavyweather
                              > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                              > > > application
                              > > > > > > will
                              > > > > > > > > write to the currdat.lst file once per minute. As with
                              > > the
                              > > > > > first
                              > > > > > > > > method, Heavyweather Pro and WUHU must be running at
                              > all
                              > > > > times.
                              > > > > > > > >
                              > > > > > > > > Well, that is the long answer. I hope things are a bit
                              > > > > clearer
                              > > > > > > now.
                              > > > > > > > >
                              > > > > > > > >
                              > > > > > > > > --- In
                              > > wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                              > > > > > > > > <sun_spot_mom@> wrote:
                              > > > > > > > > >
                              > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                              > > works,
                              > > > > > > although
                              > > > > > > > > it
                              > > > > > > > > > seems slower.
                              > > > > > > > > > So, now I have it installed, not sure if it's
                              > getting
                              > > > the
                              > > > > > > > readings,
                              > > > > > > > > > tho. My gauges don't show anything. I did turn on
                              > > > logging
                              > > > > to
                              > > > > > > > show
                              > > > > > > > > > uploads and console comm. errors. I'm not seeing
                              > much
                              > > in
                              > > > > > there
                              > > > > > > as
                              > > > > > > > > > yet.
                              > > > > > > > > >
                              > > > > > > > > > Perhaps some tips here would help?
                              > > > > > > > > >
                              > > > > > > > > > I will look at more again maybe tomorrow. I am
                              > tired
                              > > > after
                              > > > > > > > > bringing
                              > > > > > > > > > in the new year.
                              > > > > > > > > >
                              > > > > > > > > > Happy New Year!
                              > > > > > > > > > Thanks for your help.
                              > > > > > > > > > Kathy
                              > > > > > > > > >
                              > > > > > > > > > --- In wuhu_software_group@yahoogroup s.com, "<<<<<
                              > > > Dickie
                              > > > > > > > Bradford
                              > > > > > > > > > >>>>>" <dbradford@> wrote:
                              > > > > > > > > > >
                              > > > > > > > > > > I had this problem a few days ago with windows
                              > 2000,
                              > > > I
                              > > > > had
                              > > > > > a
                              > > > > > > > > > printer
                              > > > > > > > > > > installed and everytime i started WUHU it said I
                              > > > needed
                              > > > > a
                              > > > > > > > > printer,
                              > > > > > > > > > what I
                              > > > > > > > > > > did was deleted the printer, rebooted and
                              > reinstalled
                              > > > the
                              > > > > > > > printer
                              > > > > > > > > > again and
                              > > > > > > > > > > the reinstalled WUHU and it has not acted up
                              > since.
                              > > > > > > > > > >
                              > > > > > > > > > > Dickie
                              > > > > > > > > > >
                              > > > > > > > > > > -----Original Message-----
                              > > > > > > > > > > From: wuhu_software_group@yahoogroup s.com
                              > > > > > > > > > > [mailto: wuhu_software_group@yahoogroups.com]On
                              > Behalf
                              > > > Of
                              > > > > > > > > > sun_spot_mom
                              > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                              > > > > > > > > > > To: wuhu_software_group@yahoogroup s.com
                              > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                              > installing
                              > > > wuhu
                              > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > > > It could all be IE7 related...
                              > > > > > > > > > > When I said to go ahead and install IE7, I had
                              > > > problems
                              > > > > > > > > > connecting.
                              > > > > > > > > > > I went through all services and stuff in startup
                              > > and
                              > > > it
                              > > > > > > > > appeared
                              > > > > > > > > > that
                              > > > > > > > > > > my camera & printer services interfere with IE7,
                              > so
                              > > > I
                              > > > > > > stopped
                              > > > > > > > > them
                              > > > > > > > > > > from loading. I will try loading them and
                              > > restarting
                              > > > > and
                              > > > > > > then
                              > > > > > > > > try
                              > > > > > > > > > > the install again.
                              > > > > > > > > > >
                              > > > > > > > > > > I also did not see version 213 anywhere. I only
                              > > > tried
                              > > > > 212
                              > > > > > &
                              > > > > > > > 214.
                              > > > > > > > > > > Where is 213?
                              > > > > > > > > > >
                              > > > > > > > > > > Thanks
                              > > > > > > > > > >
                              > > > > > > > > > > --- In
                              > wuhu_software_group@yahoogroup s.com, "Brian"
                              > > > > > > <yahoo@>
                              > > > > > > > > > wrote:
                              > > > > > > > > > > >
                              > > > > > > > > > > > I was getting the same error when WUHU would
                              > try
                              > > > to
                              > > > > > load
                              > > > > > > at
                              > > > > > > > > > Windows
                              > > > > > > > > > > > startup. Never really got it resolved (thought
                              > I
                              > > > did,
                              > > > > > but
                              > > > > > > it
                              > > > > > > > > > > > returned). I figured it was just my machine. I
                              > do
                              > > > > have
                              > > > > > a
                              > > > > > > > > printer
                              > > > > > > > > > > > installed...I wonder if my printer wasn't
                              > loading
                              > > > at
                              > > > > > > > startup
                              > > > > > > > > > prior
                              > > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                              > I
                              > > > was
                              > > > > > using
                              > > > > > > > > > version
                              > > > > > > > > > > > 214.
                              > > > > > > > > > > >
                              > > > > > > > > > > > I actually decided to try uninstalling 214 and
                              > > > trying
                              > > > > > > 213.
                              > > > > > > > The
                              > > > > > > > > > > > problem seemed to go away. My other problem
                              > > > (serial
                              > > > > > port
                              > > > > > > > > issue
                              > > > > > > > > > with
                              > > > > > > > > > > > console stopping communication with computer
                              > and
                              > > > > serial
                              > > > > > > port
                              > > > > > > > > > > > indicating it was in use) seemed to go away
                              > when
                              > > I
                              > > > > went
                              > > > > > > > back
                              > > > > > > > > to
                              > > > > > > > > > > 213.
                              > > > > > > > > > > > Can't say for sure though. I will say it has
                              > been
                              > > > > > almost
                              > > > > > > a
                              > > > > > > > > day
                              > > > > > > > > > now
                              > > > > > > > > > > > without the problems and the problems did seem
                              > to
                              > > > > start
                              > > > > > > > when I
                              > > > > > > > > > > > installed V214.
                              > > > > > > > > > > >
                              > > > > > > > > > > >
                              > > > > > > > > > > >
                              > > > > > > > > > > > --- In
                              > > > > > > wuhu_software_group@yahoogroup s.com, "wuhu_software"
                              > > > > > > > > > > > <wuhu_software@> wrote:
                              > > > > > > > > > > > >
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > You must have a printer defined on the
                              > machine
                              > > > to
                              > > > > > > install
                              > > > > > > > > > WUHU.
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > Go to your control panel, click printers.
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > If you do not have one defined, add printer.
                              > > > > > > > > > > > >
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > --- In
                              > > > > > > wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                              > > > > > > > > > > > > <sun_spot_mom@> wrote:
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > Please help.
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > When I run install.exe I am getting:
                              > > > > > > > > > > > > > error
                              > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > Then:
                              > > > > > > > > > > > > > WUHU setup
                              > > > > > > > > > > > > > An error occurred during the move data
                              > > > process: -
                              > > > > 119
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > Component: DLLs
                              > > > > > > > > > > > > > File group: program DLLs
                              > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > I have tried both versions of the download
                              > > > files:
                              > > > > > the
                              > > > > > > > 212
                              > > > > > > > > &
                              > > > > > > > > > 214
                              > > > > > > > > > > > > > versions and I get the same messages.
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                              > upload
                              > > > to
                              > > > > > > > > > wunderground.
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > I have IE7, is that a problem?
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > > > Thanks in advance.
                              > > > > > > > > > > > > > Kathy
                              > > > > > > > > > > > > >
                              > > > > > > > > > > > >
                              > > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > >
                              > > > > > > > >
                              > > > > > > >
                              > > > > > >
                              > > > > >
                              > > > >
                              > > >
                              > >
                              >




                              --
                              ============================================================
                              John Celenza
                              Director of Weather Technology
                              Phone (415) 543-5022 x105
                              FAX   (415) 543-5044
                              john@...
                              ============================================================
                            • wuhu_software
                              John, Did you happen to notice the other stations with that same Latitude/Longitude? Do you have a default loaded when a user creates a station? You might want
                              Message 14 of 26 , Jan 3, 2007
                              • 0 Attachment
                                John,

                                Did you happen to notice the other stations with that same
                                Latitude/Longitude?

                                Do you have a default loaded when a user creates a station?

                                You might want to see how many are registered with that location.

                                I am sure the owners would like to know they are pointing off to
                                Dearing Kansas.

                                Thanks.


                                --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                <john.celenza@...> wrote:
                                >
                                > Hello :-)
                                >
                                > Sounds like you're on the right track.
                                >
                                > You can test which city your station is nearest to by taking the
                                lat and lon
                                > from the Weather Station History page and entering it into the "Fast
                                > Forecast" box with "lat,lon". You have to use the decimal version
                                (the one
                                > in parentheses) with no degree symbol like:
                                >
                                > 37.062,-95.677
                                >
                                > When I tried this, I also got Dearing Kansas.
                                >
                                > When you change your lat/lon for the station in "My Stations", it
                                will take
                                > until tomorrow morning for your station to appear on the correct
                                St. Anne
                                > pages. This is because our databases have to update.
                                >
                                > -John
                                >
                                > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                > >
                                > > Kathy,
                                > >
                                > > I think I have found the problem.
                                > >
                                > > Your latitude and longitude numbers entered in the 'My Stations'
                                page at
                                > > WU may not be correct. The are actually pointing to Dearing,
                                Kansas.
                                > >
                                > > If I pull up the forecast page for Saint Anne, Illinois:
                                > >
                                > >
                                > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                query=Saint+Anne%2C+IL#History
                                > >
                                > > The station is not listed.
                                > >
                                > > I can pull up the station history:
                                > >
                                > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                ID=KILSAINT2
                                > >
                                > > When I click the 'View Full Conditions and Forecast' on the
                                history page,
                                > > I end up here:
                                > >
                                > >
                                > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                query=37.062%2C-95.677
                                > >
                                > > I believe the latitude and longitude entered for the station are
                                not
                                > > correct.
                                > >
                                > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                > >
                                > > A quick way to get your latitude and longitude is to pull up:
                                > >
                                > > http://terraserver.homeadvisor.msn.com
                                > >
                                > > Enter your street address, city and state. When you git go you
                                can chose
                                > > either the topo or aerial map. Choose topo.
                                > >
                                > > When the next screen is displayed, the URL at the top will look
                                something
                                > > like this:
                                > >
                                > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                > > -
                                83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.com
                                /image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                > > ...
                                > >
                                > > Get the numbers that are associated with Alon and ALat
                                > >
                                > > So the data you would need is:
                                > >
                                > > Lat: *42.52875700*
                                > >
                                > > Lon: *-83.79587400*
                                > >
                                > > Once you have the correct numbers, copy and paste them in the 'My
                                > > Stations' page back at Weather Underground.
                                > >
                                > > ---
                                > >
                                > > To John,
                                > >
                                > > What is interesting to note here is that when you pull up the
                                page:
                                > >
                                > >
                                > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                query=37.062%2C-95.677
                                > >
                                > > There are stations listed from all over the country.
                                > >
                                > > I suspect that there is a default latitude and longitude being
                                loaded in
                                > > the 'My Stations' new user signup??
                                > >
                                > > ---
                                > >
                                > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > <sun_spot_mom@> wrote:
                                > > >
                                > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                > > > better?) How long should it take to show up?
                                > > >
                                > > > Thanks
                                > > > Kathy
                                > > >
                                > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > wuhu_software@ wrote:
                                > > > >
                                > > > > Kathy,
                                > > > >
                                > > > > I can see your data but you are right, it is not coming up
                                when
                                > > > zip
                                > > > > code is listed.
                                > > > >
                                > > > > I would check under the 'My Stations' link at the Weather
                                > > > Underground
                                > > > > page and verify that your zip code, city and state are entered
                                > > > > correctly there.
                                > > > >
                                > > > > If everything is entered correctly and the it does not show
                                up by
                                > > > > tomorrow, we will need to contact Weather Underground to
                                resolve
                                > > > it.
                                > > > >
                                > > > >
                                > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > <sun_spot_mom@> wrote:
                                > > > > >
                                > > > > > I am KILSAINT2.
                                > > > > >
                                > > > > > Thanks for checking. I guess I am supposed to be able to
                                look
                                > > > it
                                > > > > up
                                > > > > > by zipcode, right?
                                > > > > >
                                > > > > > Thanks
                                > > > > > Kathy
                                > > > > >
                                > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > <wuhu_software@> wrote:
                                > > > > > >
                                > > > > > >
                                > > > > > > Kathy,
                                > > > > > >
                                > > > > > > What is your WU Station ID?
                                > > > > > >
                                > > > > > > Tried looking it up by zipcode, did not see yours in
                                there.
                                > > > > > >
                                > > > > > > There was another WUHU station but it has been uploading
                                for
                                > > > some
                                > > > > > > time.
                                > > > > > >
                                > > > > > >
                                > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > >
                                > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                day
                                > > > to
                                > > > > > see
                                > > > > > > it
                                > > > > > > > when I type in my zipcode?
                                > > > > > > >
                                > > > > > > > Thanks much.
                                > > > > > > > :>)
                                > > > > > > > Kathy
                                > > > > > > >
                                > > > > > > > --- In
                                wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > > > <wuhu_software@> wrote:
                                > > > > > > > >
                                > > > > > > > >
                                > > > > > > > > Kathy,
                                > > > > > > > >
                                > > > > > > > > Sounds like you are almost there...
                                > > > > > > > >
                                > > > > > > > > Go to the Weather Underground site and log in with
                                your WU
                                > > > > > email
                                > > > > > > > and
                                > > > > > > > > password.
                                > > > > > > > >
                                > > > > > > > > Once you are logged in, there is a "My Stations" link.
                                > > > Click
                                > > > > > it.
                                > > > > > > > >
                                > > > > > > > > On the next page you will see something like:
                                > > > > > > > >
                                > > > > > > > > Current Stations
                                > > > > > > > > ID: KMI????? | data
                                > > > > > > > >
                                > > > > > > > > Your station id follows ID:
                                > > > > > > > >
                                > > > > > > > > The password entered in to WUHU is the same as you
                                use for
                                > > > > > your
                                > > > > > > > > normal WU account. It *is* case sensitive.
                                > > > > > > > >
                                > > > > > > > >
                                > > > > > > > > --- In
                                wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > > > >
                                > > > > > > > > > I do believe that it will work now (except for a
                                minor
                                > > > > > problem,
                                > > > > > > I
                                > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                my PWS
                                > > > > ID?
                                > > > > > > I've
                                > > > > > > > > > been looking at the member settings and do not see
                                it.
                                > > > I
                                > > > > > think
                                > > > > > > > its
                                > > > > > > > > > KIL something... I was using my "handle" for the ID.
                                > > > > > > > > >
                                > > > > > > > > > My gauges are showing activity. I just need to see
                                it
                                > > > > > upload.
                                > > > > > > > > > The problem was during the install of wuhu I chose
                                to
                                > > > > > install
                                > > > > > > in
                                > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                put
                                > > > it
                                > > > > > > > there.
                                > > > > > > > > >
                                > > > > > > > > > Check out the weather for 60964 coming soon!
                                > > > > > > > > >
                                > > > > > > > > > Thanks again.
                                > > > > > > > > > Kathy
                                > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > > > --- In
                                > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > > > > > <wuhu_software@> wrote:
                                > > > > > > > > > >
                                > > > > > > > > > > Kathy,
                                > > > > > > > > > >
                                > > > > > > > > > > I am not sure which console you have but the next
                                few
                                > > > > > > > paragraphs
                                > > > > > > > > > > assume you are using a WS-23XX type station.
                                > > > > > > > > > >
                                > > > > > > > > > > There are a couple of methods you can use to have
                                WUHU
                                > > > > > > > intercept
                                > > > > > > > > > data
                                > > > > > > > > > > from the console.
                                > > > > > > > > > >
                                > > > > > > > > > > The first is quite easy. You run Heavyweather
                                Beta 2.0
                                > > > > > (newer
                                > > > > > > > > than
                                > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                > > > monitors
                                > > > > a
                                > > > > > > file
                                > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                > > > > > Heavweather
                                > > > > > > and
                                > > > > > > > > > WUHU
                                > > > > > > > > > > must be run at all times otherwise WUHU will not
                                > > > receive
                                > > > > > the
                                > > > > > > > > > > currdat.lst file updates. That method is fine if
                                you
                                > > > > > insist
                                > > > > > > on
                                > > > > > > > > > > running Heavyweather. Personally, I think
                                Heavyweather
                                > > > is
                                > > > > > a
                                > > > > > > CPU
                                > > > > > > > > hog
                                > > > > > > > > > > (can easily chew up 20-30% of your processor even
                                when
                                > > > > > idle)
                                > > > > > > so
                                > > > > > > > I
                                > > > > > > > > > do
                                > > > > > > > > > > not run it.
                                > > > > > > > > > >
                                > > > > > > > > > > If you run wired mode (wire between the console
                                and
                                > > > the
                                > > > > > > remote
                                > > > > > > > > > thermo
                                > > > > > > > > > > unit), your weather data can be updated every 10
                                > > > seconds
                                > > > > > or
                                > > > > > > so.
                                > > > > > > > > In
                                > > > > > > > > > > this case, you would probably want to run WUHU in
                                > > > direct
                                > > > > > > serial
                                > > > > > > > > > > communications mode. If you are running wireless
                                mode
                                > > > (no
                                > > > > > > wire
                                > > > > > > > > > > between the console and remote thermo unit), your
                                > > > weather
                                > > > > > > data
                                > > > > > > > > will
                                > > > > > > > > > > only be updated once per minute regardless of the
                                > > > > software
                                > > > > > > > > > > combination you choose.
                                > > > > > > > > > >
                                > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                > > > > > terminate
                                > > > > > > the
                                > > > > > > > > > > Heavyweather application. When you choose this
                                method,
                                > > > > you
                                > > > > > > must
                                > > > > > > > > hit
                                > > > > > > > > > > Stop on WUHU so you can make changes to the
                                settings.
                                > > > In
                                > > > > > the
                                > > > > > > > > > general
                                > > > > > > > > > > settings, there is a pulldown combo box. You can
                                > > > > > select "WS-
                                > > > > > > > 23XX
                                > > > > > > > > > > Direct Serial Access", then to the right of the
                                combo
                                > > > > box,
                                > > > > > > > select
                                > > > > > > > > > the
                                > > > > > > > > > > communications port that the console is hooked up
                                to.
                                > > > > Once
                                > > > > > > the
                                > > > > > > > > > > changes are made, you hit start. WUHU will then
                                manage
                                > > > > the
                                > > > > > > > > > > communications with the console.
                                > > > > > > > > > >
                                > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                > > > support
                                > > > > > > > direct
                                > > > > > > > > > > serial communications at this time so you must
                                run the
                                > > > > > > > > Heavyweather
                                > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                > > > > > application
                                > > > > > > > > will
                                > > > > > > > > > > write to the currdat.lst file once per minute. As
                                with
                                > > > > the
                                > > > > > > > first
                                > > > > > > > > > > method, Heavyweather Pro and WUHU must be running
                                at
                                > > > all
                                > > > > > > times.
                                > > > > > > > > > >
                                > > > > > > > > > > Well, that is the long answer. I hope things are
                                a bit
                                > > > > > > clearer
                                > > > > > > > > now.
                                > > > > > > > > > >
                                > > > > > > > > > >
                                > > > > > > > > > > --- In
                                > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > > > > > >
                                > > > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                > > > > works,
                                > > > > > > > > although
                                > > > > > > > > > > it
                                > > > > > > > > > > > seems slower.
                                > > > > > > > > > > > So, now I have it installed, not sure if it's
                                > > > getting
                                > > > > > the
                                > > > > > > > > > readings,
                                > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                on
                                > > > > > logging
                                > > > > > > to
                                > > > > > > > > > show
                                > > > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                > > > much
                                > > > > in
                                > > > > > > > there
                                > > > > > > > > as
                                > > > > > > > > > > > yet.
                                > > > > > > > > > > >
                                > > > > > > > > > > > Perhaps some tips here would help?
                                > > > > > > > > > > >
                                > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                > > > tired
                                > > > > > after
                                > > > > > > > > > > bringing
                                > > > > > > > > > > > in the new year.
                                > > > > > > > > > > >
                                > > > > > > > > > > > Happy New Year!
                                > > > > > > > > > > > Thanks for your help.
                                > > > > > > > > > > > Kathy
                                > > > > > > > > > > >
                                > > > > > > > > > > > --- In
                                wuhu_software_group@yahoogroups.com, "<<<<<
                                > > > > > Dickie
                                > > > > > > > > > Bradford
                                > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > I had this problem a few days ago with windows
                                > > > 2000,
                                > > > > > I
                                > > > > > > had
                                > > > > > > > a
                                > > > > > > > > > > > printer
                                > > > > > > > > > > > > installed and everytime i started WUHU it
                                said I
                                > > > > > needed
                                > > > > > > a
                                > > > > > > > > > > printer,
                                > > > > > > > > > > > what I
                                > > > > > > > > > > > > did was deleted the printer, rebooted and
                                > > > reinstalled
                                > > > > > the
                                > > > > > > > > > printer
                                > > > > > > > > > > > again and
                                > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                > > > since.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Dickie
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > -----Original Message-----
                                > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                                > > > Behalf
                                > > > > > Of
                                > > > > > > > > > > > sun_spot_mom
                                > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                > > > installing
                                > > > > > wuhu
                                > > > > > > > > > > > >
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > It could all be IE7 related...
                                > > > > > > > > > > > > When I said to go ahead and install IE7, I had
                                > > > > > problems
                                > > > > > > > > > > > connecting.
                                > > > > > > > > > > > > I went through all services and stuff in
                                startup
                                > > > > and
                                > > > > > it
                                > > > > > > > > > > appeared
                                > > > > > > > > > > > that
                                > > > > > > > > > > > > my camera & printer services interfere with
                                IE7,
                                > > > so
                                > > > > > I
                                > > > > > > > > stopped
                                > > > > > > > > > > them
                                > > > > > > > > > > > > from loading. I will try loading them and
                                > > > > restarting
                                > > > > > > and
                                > > > > > > > > then
                                > > > > > > > > > > try
                                > > > > > > > > > > > > the install again.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                only
                                > > > > > tried
                                > > > > > > 212
                                > > > > > > > &
                                > > > > > > > > > 214.
                                > > > > > > > > > > > > Where is 213?
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Thanks
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > --- In
                                > > > wuhu_software_group@yahoogroups.com, "Brian"
                                > > > > > > > > <yahoo@>
                                > > > > > > > > > > > wrote:
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > I was getting the same error when WUHU would
                                > > > try
                                > > > > > to
                                > > > > > > > load
                                > > > > > > > > at
                                > > > > > > > > > > > Windows
                                > > > > > > > > > > > > > startup. Never really got it resolved
                                (thought
                                > > > I
                                > > > > > did,
                                > > > > > > > but
                                > > > > > > > > it
                                > > > > > > > > > > > > > returned). I figured it was just my
                                machine. I
                                > > > do
                                > > > > > > have
                                > > > > > > > a
                                > > > > > > > > > > printer
                                > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                > > > loading
                                > > > > > at
                                > > > > > > > > > startup
                                > > > > > > > > > > > prior
                                > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                it?
                                > > > I
                                > > > > > was
                                > > > > > > > using
                                > > > > > > > > > > > version
                                > > > > > > > > > > > > > 214.
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                and
                                > > > > > trying
                                > > > > > > > > 213.
                                > > > > > > > > > The
                                > > > > > > > > > > > > > problem seemed to go away. My other problem
                                > > > > > (serial
                                > > > > > > > port
                                > > > > > > > > > > issue
                                > > > > > > > > > > > with
                                > > > > > > > > > > > > > console stopping communication with computer
                                > > > and
                                > > > > > > serial
                                > > > > > > > > port
                                > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                > > > when
                                > > > > I
                                > > > > > > went
                                > > > > > > > > > back
                                > > > > > > > > > > to
                                > > > > > > > > > > > > 213.
                                > > > > > > > > > > > > > Can't say for sure though. I will say it has
                                > > > been
                                > > > > > > > almost
                                > > > > > > > > a
                                > > > > > > > > > > day
                                > > > > > > > > > > > now
                                > > > > > > > > > > > > > without the problems and the problems did
                                seem
                                > > > to
                                > > > > > > start
                                > > > > > > > > > when I
                                > > > > > > > > > > > > > installed V214.
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > --- In
                                > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > > > > > > > > > <wuhu_software@> wrote:
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > You must have a printer defined on the
                                > > > machine
                                > > > > > to
                                > > > > > > > > install
                                > > > > > > > > > > > WUHU.
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > Go to your control panel, click printers.
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > If you do not have one defined, add
                                printer.
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > --- In
                                > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > Please help.
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                > > > > > > > > > > > > > > > error
                                > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > Then:
                                > > > > > > > > > > > > > > > WUHU setup
                                > > > > > > > > > > > > > > > An error occurred during the move data
                                > > > > > process: -
                                > > > > > > 119
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > Component: DLLs
                                > > > > > > > > > > > > > > > File group: program DLLs
                                > > > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > I have tried both versions of the
                                download
                                > > > > > files:
                                > > > > > > > the
                                > > > > > > > > > 212
                                > > > > > > > > > > &
                                > > > > > > > > > > > 214
                                > > > > > > > > > > > > > > > versions and I get the same messages.
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                > > > upload
                                > > > > > to
                                > > > > > > > > > > > wunderground.
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > > > Thanks in advance.
                                > > > > > > > > > > > > > > > Kathy
                                > > > > > > > > > > > > > > >
                                > > > > > > > > > > > > > >
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > >
                                > > > > > > >
                                > > > > > >
                                > > > > >
                                > > > >
                                > > >
                                > >
                                > >
                                > >
                                >
                                >
                                >
                                > --
                                > ============================================================
                                > John Celenza
                                > Director of Weather Technology
                                > Phone (415) 543-5022 x105
                                > FAX (415) 543-5044
                                > john@...
                                > ============================================================
                                >
                              • John Celenza
                                I have seen this, and it s on a oh my list of bugs to fix. What happens is that Dearing Kansas is the center of the US. So, if an address lookup fails, we
                                Message 15 of 26 , Jan 3, 2007
                                • 0 Attachment
                                  I have seen this, and it's on a "oh my" list of bugs to fix.

                                  What happens is that Dearing Kansas is the center of the US. So, if an address lookup fails, we get Dearing Kansas back since the geocoder defaults to the center of the country!

                                  -John

                                  On 1/3/07, wuhu_software <wuhu_software@...> wrote:


                                  John,

                                  Did you happen to notice the other stations with that same
                                  Latitude/Longitude?

                                  Do you have a default loaded when a user creates a station?

                                  You might want to see how many are registered with that location.

                                  I am sure the owners would like to know they are pointing off to
                                  Dearing Kansas.

                                  Thanks.

                                  --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                  <john.celenza@...> wrote:
                                  >
                                  > Hello :-)
                                  >
                                  > Sounds like you're on the right track.
                                  >
                                  > You can test which city your station is nearest to by taking the
                                  lat and lon
                                  > from the Weather Station History page and entering it into the "Fast
                                  > Forecast" box with "lat,lon". You have to use the decimal version
                                  (the one
                                  > in parentheses) with no degree symbol like:
                                  >
                                  > 37.062,-95.677
                                  >
                                  > When I tried this, I also got Dearing Kansas.
                                  >
                                  > When you change your lat/lon for the station in "My Stations", it
                                  will take
                                  > until tomorrow morning for your station to appear on the correct
                                  St. Anne
                                  > pages. This is because our databases have to update.
                                  >
                                  > -John
                                  >

                                  > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                  > >
                                  > > Kathy,
                                  > >
                                  > > I think I have found the problem.
                                  > >
                                  > > Your latitude and longitude numbers entered in the 'My Stations'
                                  page at
                                  > > WU may not be correct. The are actually pointing to Dearing,
                                  Kansas.
                                  > >
                                  > > If I pull up the forecast page for Saint Anne, Illinois:
                                  > >
                                  > >
                                  > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                  query=Saint+Anne%2C+IL#History
                                  > >
                                  > > The station is not listed.
                                  > >
                                  > > I can pull up the station history:
                                  > >
                                  > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                  ID=KILSAINT2
                                  > >
                                  > > When I click the 'View Full Conditions and Forecast' on the
                                  history page,
                                  > > I end up here:
                                  > >
                                  > >
                                  > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                  query=37.062%2C-95.677
                                  > >
                                  > > I believe the latitude and longitude entered for the station are
                                  not
                                  > > correct.
                                  > >
                                  > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                  > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                  > >
                                  > > A quick way to get your latitude and longitude is to pull up:
                                  > >
                                  > > http://terraserver.homeadvisor.msn.com
                                  > >
                                  > > Enter your street address, city and state. When you git go you
                                  can chose
                                  > > either the topo or aerial map. Choose topo.
                                  > >
                                  > > When the next screen is displayed, the URL at the top will look
                                  something
                                  > > like this:
                                  > >
                                  > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                  > > -
                                  83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.com
                                  /image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                  > > ...
                                  > >
                                  > > Get the numbers that are associated with Alon and ALat
                                  > >
                                  > > So the data you would need is:
                                  > >
                                  > > Lat: *42.52875700*
                                  > >
                                  > > Lon: *-83.79587400*
                                  > >
                                  > > Once you have the correct numbers, copy and paste them in the 'My
                                  > > Stations' page back at Weather Underground.
                                  > >
                                  > > ---
                                  > >
                                  > > To John,
                                  > >
                                  > > What is interesting to note here is that when you pull up the
                                  page:
                                  > >
                                  > >
                                  > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                  query=37.062%2C-95.677
                                  > >
                                  > > There are stations listed from all over the country.
                                  > >
                                  > > I suspect that there is a default latitude and longitude being
                                  loaded in
                                  > > the 'My Stations' new user signup??
                                  > >
                                  > > ---
                                  > >
                                  > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > <sun_spot_mom@> wrote:
                                  > > >
                                  > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                  > > > better?) How long should it take to show up?
                                  > > >
                                  > > > Thanks
                                  > > > Kathy
                                  > > >
                                  > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > wuhu_software@ wrote:
                                  > > > >
                                  > > > > Kathy,
                                  > > > >
                                  > > > > I can see your data but you are right, it is not coming up
                                  when
                                  > > > zip
                                  > > > > code is listed.
                                  > > > >
                                  > > > > I would check under the 'My Stations' link at the Weather
                                  > > > Underground
                                  > > > > page and verify that your zip code, city and state are entered
                                  > > > > correctly there.
                                  > > > >
                                  > > > > If everything is entered correctly and the it does not show
                                  up by
                                  > > > > tomorrow, we will need to contact Weather Underground to
                                  resolve
                                  > > > it.
                                  > > > >
                                  > > > >
                                  > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > <sun_spot_mom@> wrote:
                                  > > > > >
                                  > > > > > I am KILSAINT2.
                                  > > > > >
                                  > > > > > Thanks for checking. I guess I am supposed to be able to
                                  look
                                  > > > it
                                  > > > > up
                                  > > > > > by zipcode, right?
                                  > > > > >
                                  > > > > > Thanks
                                  > > > > > Kathy
                                  > > > > >
                                  > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > <wuhu_software@> wrote:
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > Kathy,
                                  > > > > > >
                                  > > > > > > What is your WU Station ID?
                                  > > > > > >
                                  > > > > > > Tried looking it up by zipcode, did not see yours in
                                  there.
                                  > > > > > >
                                  > > > > > > There was another WUHU station but it has been uploading
                                  for
                                  > > > some
                                  > > > > > > time.
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > >
                                  > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                  day
                                  > > > to
                                  > > > > > see
                                  > > > > > > it
                                  > > > > > > > when I type in my zipcode?
                                  > > > > > > >
                                  > > > > > > > Thanks much.
                                  > > > > > > > :>)
                                  > > > > > > > Kathy
                                  > > > > > > >
                                  > > > > > > > --- In
                                  wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > > > <wuhu_software@> wrote:
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > Kathy,
                                  > > > > > > > >
                                  > > > > > > > > Sounds like you are almost there...
                                  > > > > > > > >
                                  > > > > > > > > Go to the Weather Underground site and log in with
                                  your WU
                                  > > > > > email
                                  > > > > > > > and
                                  > > > > > > > > password.
                                  > > > > > > > >
                                  > > > > > > > > Once you are logged in, there is a "My Stations" link.
                                  > > > Click
                                  > > > > > it.
                                  > > > > > > > >
                                  > > > > > > > > On the next page you will see something like:
                                  > > > > > > > >
                                  > > > > > > > > Current Stations
                                  > > > > > > > > ID: KMI????? | data
                                  > > > > > > > >
                                  > > > > > > > > Your station id follows ID:
                                  > > > > > > > >
                                  > > > > > > > > The password entered in to WUHU is the same as you
                                  use for
                                  > > > > > your
                                  > > > > > > > > normal WU account. It *is* case sensitive.
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > --- In
                                  wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > > > >
                                  > > > > > > > > > I do believe that it will work now (except for a
                                  minor
                                  > > > > > problem,
                                  > > > > > > I
                                  > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                  my PWS
                                  > > > > ID?
                                  > > > > > > I've
                                  > > > > > > > > > been looking at the member settings and do not see
                                  it.
                                  > > > I
                                  > > > > > think
                                  > > > > > > > its
                                  > > > > > > > > > KIL something... I was using my "handle" for the ID.
                                  > > > > > > > > >
                                  > > > > > > > > > My gauges are showing activity. I just need to see
                                  it
                                  > > > > > upload.
                                  > > > > > > > > > The problem was during the install of wuhu I chose
                                  to
                                  > > > > > install
                                  > > > > > > in
                                  > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                  put
                                  > > > it
                                  > > > > > > > there.
                                  > > > > > > > > >
                                  > > > > > > > > > Check out the weather for 60964 coming soon!
                                  > > > > > > > > >
                                  > > > > > > > > > Thanks again.
                                  > > > > > > > > > Kathy
                                  > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > > > --- In
                                  > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > > > > > <wuhu_software@> wrote:
                                  > > > > > > > > > >
                                  > > > > > > > > > > Kathy,
                                  > > > > > > > > > >
                                  > > > > > > > > > > I am not sure which console you have but the next
                                  few
                                  > > > > > > > paragraphs
                                  > > > > > > > > > > assume you are using a WS-23XX type station.
                                  > > > > > > > > > >
                                  > > > > > > > > > > There are a couple of methods you can use to have
                                  WUHU
                                  > > > > > > > intercept
                                  > > > > > > > > > data
                                  > > > > > > > > > > from the console.
                                  > > > > > > > > > >
                                  > > > > > > > > > > The first is quite easy. You run Heavyweather
                                  Beta 2.0
                                  > > > > > (newer
                                  > > > > > > > > than
                                  > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                  > > > monitors
                                  > > > > a
                                  > > > > > > file
                                  > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                  > > > > > Heavweather
                                  > > > > > > and
                                  > > > > > > > > > WUHU
                                  > > > > > > > > > > must be run at all times otherwise WUHU will not
                                  > > > receive
                                  > > > > > the
                                  > > > > > > > > > > currdat.lst file updates. That method is fine if
                                  you
                                  > > > > > insist
                                  > > > > > > on
                                  > > > > > > > > > > running Heavyweather. Personally, I think
                                  Heavyweather
                                  > > > is
                                  > > > > > a
                                  > > > > > > CPU
                                  > > > > > > > > hog
                                  > > > > > > > > > > (can easily chew up 20-30% of your processor even
                                  when
                                  > > > > > idle)
                                  > > > > > > so
                                  > > > > > > > I
                                  > > > > > > > > > do
                                  > > > > > > > > > > not run it.
                                  > > > > > > > > > >
                                  > > > > > > > > > > If you run wired mode (wire between the console
                                  and
                                  > > > the
                                  > > > > > > remote
                                  > > > > > > > > > thermo
                                  > > > > > > > > > > unit), your weather data can be updated every 10
                                  > > > seconds
                                  > > > > > or
                                  > > > > > > so.
                                  > > > > > > > > In
                                  > > > > > > > > > > this case, you would probably want to run WUHU in
                                  > > > direct
                                  > > > > > > serial
                                  > > > > > > > > > > communications mode. If you are running wireless
                                  mode
                                  > > > (no
                                  > > > > > > wire
                                  > > > > > > > > > > between the console and remote thermo unit), your
                                  > > > weather
                                  > > > > > > data
                                  > > > > > > > > will
                                  > > > > > > > > > > only be updated once per minute regardless of the
                                  > > > > software
                                  > > > > > > > > > > combination you choose.
                                  > > > > > > > > > >
                                  > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                  > > > > > terminate
                                  > > > > > > the
                                  > > > > > > > > > > Heavyweather application. When you choose this
                                  method,
                                  > > > > you
                                  > > > > > > must
                                  > > > > > > > > hit
                                  > > > > > > > > > > Stop on WUHU so you can make changes to the
                                  settings.
                                  > > > In
                                  > > > > > the
                                  > > > > > > > > > general
                                  > > > > > > > > > > settings, there is a pulldown combo box. You can
                                  > > > > > select "WS-
                                  > > > > > > > 23XX
                                  > > > > > > > > > > Direct Serial Access", then to the right of the
                                  combo
                                  > > > > box,
                                  > > > > > > > select
                                  > > > > > > > > > the
                                  > > > > > > > > > > communications port that the console is hooked up
                                  to.
                                  > > > > Once
                                  > > > > > > the
                                  > > > > > > > > > > changes are made, you hit start. WUHU will then
                                  manage
                                  > > > > the
                                  > > > > > > > > > > communications with the console.
                                  > > > > > > > > > >
                                  > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                  > > > support
                                  > > > > > > > direct
                                  > > > > > > > > > > serial communications at this time so you must
                                  run the
                                  > > > > > > > > Heavyweather
                                  > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                  > > > > > application
                                  > > > > > > > > will
                                  > > > > > > > > > > write to the currdat.lst file once per minute. As
                                  with
                                  > > > > the
                                  > > > > > > > first
                                  > > > > > > > > > > method, Heavyweather Pro and WUHU must be running
                                  at
                                  > > > all
                                  > > > > > > times.
                                  > > > > > > > > > >
                                  > > > > > > > > > > Well, that is the long answer. I hope things are
                                  a bit
                                  > > > > > > clearer
                                  > > > > > > > > now.
                                  > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > > > --- In
                                  > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                  > > > > works,
                                  > > > > > > > > although
                                  > > > > > > > > > > it
                                  > > > > > > > > > > > seems slower.
                                  > > > > > > > > > > > So, now I have it installed, not sure if it's
                                  > > > getting
                                  > > > > > the
                                  > > > > > > > > > readings,
                                  > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                  on
                                  > > > > > logging
                                  > > > > > > to
                                  > > > > > > > > > show
                                  > > > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                  > > > much
                                  > > > > in
                                  > > > > > > > there
                                  > > > > > > > > as
                                  > > > > > > > > > > > yet.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Perhaps some tips here would help?
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                  > > > tired
                                  > > > > > after
                                  > > > > > > > > > > bringing
                                  > > > > > > > > > > > in the new year.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Happy New Year!
                                  > > > > > > > > > > > Thanks for your help.
                                  > > > > > > > > > > > Kathy
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > --- In
                                  wuhu_software_group@yahoogroups.com, "<<<<<
                                  > > > > > Dickie
                                  > > > > > > > > > Bradford
                                  > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > I had this problem a few days ago with windows
                                  > > > 2000,
                                  > > > > > I
                                  > > > > > > had
                                  > > > > > > > a
                                  > > > > > > > > > > > printer
                                  > > > > > > > > > > > > installed and everytime i started WUHU it
                                  said I
                                  > > > > > needed
                                  > > > > > > a
                                  > > > > > > > > > > printer,
                                  > > > > > > > > > > > what I
                                  > > > > > > > > > > > > did was deleted the printer, rebooted and
                                  > > > reinstalled
                                  > > > > > the
                                  > > > > > > > > > printer
                                  > > > > > > > > > > > again and
                                  > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                  > > > since.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > Dickie
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > -----Original Message-----
                                  > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                  > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com ]On
                                  > > > Behalf
                                  > > > > > Of
                                  > > > > > > > > > > > sun_spot_mom
                                  > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                  > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                  > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                  > > > installing
                                  > > > > > wuhu
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > It could all be IE7 related...
                                  > > > > > > > > > > > > When I said to go ahead and install IE7, I had
                                  > > > > > problems
                                  > > > > > > > > > > > connecting.
                                  > > > > > > > > > > > > I went through all services and stuff in
                                  startup
                                  > > > > and
                                  > > > > > it
                                  > > > > > > > > > > appeared
                                  > > > > > > > > > > > that
                                  > > > > > > > > > > > > my camera & printer services interfere with
                                  IE7,
                                  > > > so
                                  > > > > > I
                                  > > > > > > > > stopped
                                  > > > > > > > > > > them
                                  > > > > > > > > > > > > from loading. I will try loading them and
                                  > > > > restarting
                                  > > > > > > and
                                  > > > > > > > > then
                                  > > > > > > > > > > try
                                  > > > > > > > > > > > > the install again.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                  only
                                  > > > > > tried
                                  > > > > > > 212
                                  > > > > > > > &
                                  > > > > > > > > > 214.
                                  > > > > > > > > > > > > Where is 213?
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > Thanks
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > --- In
                                  > > > wuhu_software_group@yahoogroups.com, "Brian"

                                  > > > > > > > > <yahoo@>
                                  > > > > > > > > > > > wrote:
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > I was getting the same error when WUHU would
                                  > > > try
                                  > > > > > to
                                  > > > > > > > load
                                  > > > > > > > > at
                                  > > > > > > > > > > > Windows
                                  > > > > > > > > > > > > > startup. Never really got it resolved
                                  (thought
                                  > > > I
                                  > > > > > did,
                                  > > > > > > > but
                                  > > > > > > > > it
                                  > > > > > > > > > > > > > returned). I figured it was just my
                                  machine. I
                                  > > > do
                                  > > > > > > have
                                  > > > > > > > a
                                  > > > > > > > > > > printer
                                  > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                  > > > loading
                                  > > > > > at
                                  > > > > > > > > > startup
                                  > > > > > > > > > > > prior
                                  > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                  it?
                                  > > > I
                                  > > > > > was
                                  > > > > > > > using
                                  > > > > > > > > > > > version
                                  > > > > > > > > > > > > > 214.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                  and
                                  > > > > > trying
                                  > > > > > > > > 213.
                                  > > > > > > > > > The
                                  > > > > > > > > > > > > > problem seemed to go away. My other problem
                                  > > > > > (serial
                                  > > > > > > > port
                                  > > > > > > > > > > issue
                                  > > > > > > > > > > > with
                                  > > > > > > > > > > > > > console stopping communication with computer
                                  > > > and
                                  > > > > > > serial
                                  > > > > > > > > port
                                  > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                  > > > when
                                  > > > > I
                                  > > > > > > went
                                  > > > > > > > > > back
                                  > > > > > > > > > > to
                                  > > > > > > > > > > > > 213.
                                  > > > > > > > > > > > > > Can't say for sure though. I will say it has
                                  > > > been
                                  > > > > > > > almost
                                  > > > > > > > > a
                                  > > > > > > > > > > day
                                  > > > > > > > > > > > now
                                  > > > > > > > > > > > > > without the problems and the problems did
                                  seem
                                  > > > to
                                  > > > > > > start
                                  > > > > > > > > > when I
                                  > > > > > > > > > > > > > installed V214.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > --- In
                                  > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > > > > > > > > > <wuhu_software@> wrote:
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > You must have a printer defined on the
                                  > > > machine
                                  > > > > > to
                                  > > > > > > > > install
                                  > > > > > > > > > > > WUHU.
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > Go to your control panel, click printers.
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > If you do not have one defined, add
                                  printer.
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > --- In
                                  > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > Please help.
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                  > > > > > > > > > > > > > > > error
                                  > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > Then:
                                  > > > > > > > > > > > > > > > WUHU setup
                                  > > > > > > > > > > > > > > > An error occurred during the move data
                                  > > > > > process: -
                                  > > > > > > 119
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > Component: DLLs
                                  > > > > > > > > > > > > > > > File group: program DLLs
                                  > > > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > I have tried both versions of the
                                  download
                                  > > > > > files:
                                  > > > > > > > the
                                  > > > > > > > > > 212
                                  > > > > > > > > > > &
                                  > > > > > > > > > > > 214
                                  > > > > > > > > > > > > > > > versions and I get the same messages.
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                  > > > upload
                                  > > > > > to
                                  > > > > > > > > > > > wunderground.
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > > > Thanks in advance.
                                  > > > > > > > > > > > > > > > Kathy
                                  > > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > >
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > >
                                  > > > > > >
                                  > > > > >
                                  > > > >
                                  > > >
                                  > >
                                  > >
                                  > >
                                  >
                                  >
                                  >
                                  > --
                                  > ============================================================
                                  > John Celenza
                                  > Director of Weather Technology
                                  > Phone (415) 543-5022 x105
                                  > FAX (415) 543-5044
                                  > john@...
                                  > ============================================================
                                  >




                                  --
                                  ============================================================
                                  John Celenza
                                  Director of Weather Technology
                                  Phone (415) 543-5022 x105
                                  FAX   (415) 543-5044
                                  john@...
                                  ============================================================
                                • sun_spot_mom
                                  Okay, you guys are great. I believe I have changed the lat/lon to the correct data. I look forward to seeing St. Anne come up tomorrow. Thanks for all of your
                                  Message 16 of 26 , Jan 3, 2007
                                  • 0 Attachment
                                    Okay, you guys are great.
                                    I believe I have changed the lat/lon to the correct data.
                                    I look forward to seeing St. Anne come up tomorrow.
                                    Thanks for all of your help.

                                    Kathy

                                    --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                    <john.celenza@...> wrote:
                                    >
                                    > Hello :-)
                                    >
                                    > Sounds like you're on the right track.
                                    >
                                    > You can test which city your station is nearest to by taking the
                                    lat and lon
                                    > from the Weather Station History page and entering it into
                                    the "Fast
                                    > Forecast" box with "lat,lon". You have to use the decimal version
                                    (the one
                                    > in parentheses) with no degree symbol like:
                                    >
                                    > 37.062,-95.677
                                    >
                                    > When I tried this, I also got Dearing Kansas.
                                    >
                                    > When you change your lat/lon for the station in "My Stations", it
                                    will take
                                    > until tomorrow morning for your station to appear on the correct
                                    St. Anne
                                    > pages. This is because our databases have to update.
                                    >
                                    > -John
                                    >
                                    > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                    > >
                                    > > Kathy,
                                    > >
                                    > > I think I have found the problem.
                                    > >
                                    > > Your latitude and longitude numbers entered in the 'My Stations'
                                    page at
                                    > > WU may not be correct. The are actually pointing to Dearing,
                                    Kansas.
                                    > >
                                    > > If I pull up the forecast page for Saint Anne, Illinois:
                                    > >
                                    > >
                                    > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                    query=Saint+Anne%2C+IL#History
                                    > >
                                    > > The station is not listed.
                                    > >
                                    > > I can pull up the station history:
                                    > >
                                    > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                    ID=KILSAINT2
                                    > >
                                    > > When I click the 'View Full Conditions and Forecast' on the
                                    history page,
                                    > > I end up here:
                                    > >
                                    > >
                                    > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                    query=37.062%2C-95.677
                                    > >
                                    > > I believe the latitude and longitude entered for the station are
                                    not
                                    > > correct.
                                    > >
                                    > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                    > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                    > >
                                    > > A quick way to get your latitude and longitude is to pull up:
                                    > >
                                    > > http://terraserver.homeadvisor.msn.com
                                    > >
                                    > > Enter your street address, city and state. When you git go you
                                    can chose
                                    > > either the topo or aerial map. Choose topo.
                                    > >
                                    > > When the next screen is displayed, the URL at the top will look
                                    something
                                    > > like this:
                                    > >
                                    > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                    > > -
                                    83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.co
                                    m/image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                    > > ...
                                    > >
                                    > > Get the numbers that are associated with Alon and ALat
                                    > >
                                    > > So the data you would need is:
                                    > >
                                    > > Lat: *42.52875700*
                                    > >
                                    > > Lon: *-83.79587400*
                                    > >
                                    > > Once you have the correct numbers, copy and paste them in the 'My
                                    > > Stations' page back at Weather Underground.
                                    > >
                                    > > ---
                                    > >
                                    > > To John,
                                    > >
                                    > > What is interesting to note here is that when you pull up the
                                    page:
                                    > >
                                    > >
                                    > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                    query=37.062%2C-95.677
                                    > >
                                    > > There are stations listed from all over the country.
                                    > >
                                    > > I suspect that there is a default latitude and longitude being
                                    loaded in
                                    > > the 'My Stations' new user signup??
                                    > >
                                    > > ---
                                    > >
                                    > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > <sun_spot_mom@> wrote:
                                    > > >
                                    > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                    > > > better?) How long should it take to show up?
                                    > > >
                                    > > > Thanks
                                    > > > Kathy
                                    > > >
                                    > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > wuhu_software@ wrote:
                                    > > > >
                                    > > > > Kathy,
                                    > > > >
                                    > > > > I can see your data but you are right, it is not coming up
                                    when
                                    > > > zip
                                    > > > > code is listed.
                                    > > > >
                                    > > > > I would check under the 'My Stations' link at the Weather
                                    > > > Underground
                                    > > > > page and verify that your zip code, city and state are
                                    entered
                                    > > > > correctly there.
                                    > > > >
                                    > > > > If everything is entered correctly and the it does not show
                                    up by
                                    > > > > tomorrow, we will need to contact Weather Underground to
                                    resolve
                                    > > > it.
                                    > > > >
                                    > > > >
                                    > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > <sun_spot_mom@> wrote:
                                    > > > > >
                                    > > > > > I am KILSAINT2.
                                    > > > > >
                                    > > > > > Thanks for checking. I guess I am supposed to be able to
                                    look
                                    > > > it
                                    > > > > up
                                    > > > > > by zipcode, right?
                                    > > > > >
                                    > > > > > Thanks
                                    > > > > > Kathy
                                    > > > > >
                                    > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > <wuhu_software@> wrote:
                                    > > > > > >
                                    > > > > > >
                                    > > > > > > Kathy,
                                    > > > > > >
                                    > > > > > > What is your WU Station ID?
                                    > > > > > >
                                    > > > > > > Tried looking it up by zipcode, did not see yours in
                                    there.
                                    > > > > > >
                                    > > > > > > There was another WUHU station but it has been uploading
                                    for
                                    > > > some
                                    > > > > > > time.
                                    > > > > > >
                                    > > > > > >
                                    > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > >
                                    > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                    day
                                    > > > to
                                    > > > > > see
                                    > > > > > > it
                                    > > > > > > > when I type in my zipcode?
                                    > > > > > > >
                                    > > > > > > > Thanks much.
                                    > > > > > > > :>)
                                    > > > > > > > Kathy
                                    > > > > > > >
                                    > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > > > Kathy,
                                    > > > > > > > >
                                    > > > > > > > > Sounds like you are almost there...
                                    > > > > > > > >
                                    > > > > > > > > Go to the Weather Underground site and log in with
                                    your WU
                                    > > > > > email
                                    > > > > > > > and
                                    > > > > > > > > password.
                                    > > > > > > > >
                                    > > > > > > > > Once you are logged in, there is a "My Stations"
                                    link.
                                    > > > Click
                                    > > > > > it.
                                    > > > > > > > >
                                    > > > > > > > > On the next page you will see something like:
                                    > > > > > > > >
                                    > > > > > > > > Current Stations
                                    > > > > > > > > ID: KMI????? | data
                                    > > > > > > > >
                                    > > > > > > > > Your station id follows ID:
                                    > > > > > > > >
                                    > > > > > > > > The password entered in to WUHU is the same as you
                                    use for
                                    > > > > > your
                                    > > > > > > > > normal WU account. It *is* case sensitive.
                                    > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > >
                                    > > > > > > > > > I do believe that it will work now (except for a
                                    minor
                                    > > > > > problem,
                                    > > > > > > I
                                    > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                    my PWS
                                    > > > > ID?
                                    > > > > > > I've
                                    > > > > > > > > > been looking at the member settings and do not see
                                    it.
                                    > > > I
                                    > > > > > think
                                    > > > > > > > its
                                    > > > > > > > > > KIL something... I was using my "handle" for the
                                    ID.
                                    > > > > > > > > >
                                    > > > > > > > > > My gauges are showing activity. I just need to see
                                    it
                                    > > > > > upload.
                                    > > > > > > > > > The problem was during the install of wuhu I chose
                                    to
                                    > > > > > install
                                    > > > > > > in
                                    > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                    put
                                    > > > it
                                    > > > > > > > there.
                                    > > > > > > > > >
                                    > > > > > > > > > Check out the weather for 60964 coming soon!
                                    > > > > > > > > >
                                    > > > > > > > > > Thanks again.
                                    > > > > > > > > > Kathy
                                    > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > > > --- In
                                    > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > > > >
                                    > > > > > > > > > > Kathy,
                                    > > > > > > > > > >
                                    > > > > > > > > > > I am not sure which console you have but the
                                    next few
                                    > > > > > > > paragraphs
                                    > > > > > > > > > > assume you are using a WS-23XX type station.
                                    > > > > > > > > > >
                                    > > > > > > > > > > There are a couple of methods you can use to
                                    have WUHU
                                    > > > > > > > intercept
                                    > > > > > > > > > data
                                    > > > > > > > > > > from the console.
                                    > > > > > > > > > >
                                    > > > > > > > > > > The first is quite easy. You run Heavyweather
                                    Beta 2.0
                                    > > > > > (newer
                                    > > > > > > > > than
                                    > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                    > > > monitors
                                    > > > > a
                                    > > > > > > file
                                    > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                    > > > > > Heavweather
                                    > > > > > > and
                                    > > > > > > > > > WUHU
                                    > > > > > > > > > > must be run at all times otherwise WUHU will not
                                    > > > receive
                                    > > > > > the
                                    > > > > > > > > > > currdat.lst file updates. That method is fine if
                                    you
                                    > > > > > insist
                                    > > > > > > on
                                    > > > > > > > > > > running Heavyweather. Personally, I think
                                    Heavyweather
                                    > > > is
                                    > > > > > a
                                    > > > > > > CPU
                                    > > > > > > > > hog
                                    > > > > > > > > > > (can easily chew up 20-30% of your processor
                                    even when
                                    > > > > > idle)
                                    > > > > > > so
                                    > > > > > > > I
                                    > > > > > > > > > do
                                    > > > > > > > > > > not run it.
                                    > > > > > > > > > >
                                    > > > > > > > > > > If you run wired mode (wire between the console
                                    and
                                    > > > the
                                    > > > > > > remote
                                    > > > > > > > > > thermo
                                    > > > > > > > > > > unit), your weather data can be updated every 10
                                    > > > seconds
                                    > > > > > or
                                    > > > > > > so.
                                    > > > > > > > > In
                                    > > > > > > > > > > this case, you would probably want to run WUHU in
                                    > > > direct
                                    > > > > > > serial
                                    > > > > > > > > > > communications mode. If you are running wireless
                                    mode
                                    > > > (no
                                    > > > > > > wire
                                    > > > > > > > > > > between the console and remote thermo unit), your
                                    > > > weather
                                    > > > > > > data
                                    > > > > > > > > will
                                    > > > > > > > > > > only be updated once per minute regardless of the
                                    > > > > software
                                    > > > > > > > > > > combination you choose.
                                    > > > > > > > > > >
                                    > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                    > > > > > terminate
                                    > > > > > > the
                                    > > > > > > > > > > Heavyweather application. When you choose this
                                    method,
                                    > > > > you
                                    > > > > > > must
                                    > > > > > > > > hit
                                    > > > > > > > > > > Stop on WUHU so you can make changes to the
                                    settings.
                                    > > > In
                                    > > > > > the
                                    > > > > > > > > > general
                                    > > > > > > > > > > settings, there is a pulldown combo box. You can
                                    > > > > > select "WS-
                                    > > > > > > > 23XX
                                    > > > > > > > > > > Direct Serial Access", then to the right of the
                                    combo
                                    > > > > box,
                                    > > > > > > > select
                                    > > > > > > > > > the
                                    > > > > > > > > > > communications port that the console is hooked
                                    up to.
                                    > > > > Once
                                    > > > > > > the
                                    > > > > > > > > > > changes are made, you hit start. WUHU will then
                                    manage
                                    > > > > the
                                    > > > > > > > > > > communications with the console.
                                    > > > > > > > > > >
                                    > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                    > > > support
                                    > > > > > > > direct
                                    > > > > > > > > > > serial communications at this time so you must
                                    run the
                                    > > > > > > > > Heavyweather
                                    > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                    > > > > > application
                                    > > > > > > > > will
                                    > > > > > > > > > > write to the currdat.lst file once per minute.
                                    As with
                                    > > > > the
                                    > > > > > > > first
                                    > > > > > > > > > > method, Heavyweather Pro and WUHU must be
                                    running at
                                    > > > all
                                    > > > > > > times.
                                    > > > > > > > > > >
                                    > > > > > > > > > > Well, that is the long answer. I hope things are
                                    a bit
                                    > > > > > > clearer
                                    > > > > > > > > now.
                                    > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > > > --- In
                                    > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Okay!! That worked...and interestingly IE7
                                    still
                                    > > > > works,
                                    > > > > > > > > although
                                    > > > > > > > > > > it
                                    > > > > > > > > > > > seems slower.
                                    > > > > > > > > > > > So, now I have it installed, not sure if it's
                                    > > > getting
                                    > > > > > the
                                    > > > > > > > > > readings,
                                    > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                    on
                                    > > > > > logging
                                    > > > > > > to
                                    > > > > > > > > > show
                                    > > > > > > > > > > > uploads and console comm. errors. I'm not
                                    seeing
                                    > > > much
                                    > > > > in
                                    > > > > > > > there
                                    > > > > > > > > as
                                    > > > > > > > > > > > yet.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Perhaps some tips here would help?
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                    > > > tired
                                    > > > > > after
                                    > > > > > > > > > > bringing
                                    > > > > > > > > > > > in the new year.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Happy New Year!
                                    > > > > > > > > > > > Thanks for your help.
                                    > > > > > > > > > > > Kathy
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "<<<<<
                                    > > > > > Dickie
                                    > > > > > > > > > Bradford
                                    > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I had this problem a few days ago with
                                    windows
                                    > > > 2000,
                                    > > > > > I
                                    > > > > > > had
                                    > > > > > > > a
                                    > > > > > > > > > > > printer
                                    > > > > > > > > > > > > installed and everytime i started WUHU it
                                    said I
                                    > > > > > needed
                                    > > > > > > a
                                    > > > > > > > > > > printer,
                                    > > > > > > > > > > > what I
                                    > > > > > > > > > > > > did was deleted the printer, rebooted and
                                    > > > reinstalled
                                    > > > > > the
                                    > > > > > > > > > printer
                                    > > > > > > > > > > > again and
                                    > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                    > > > since.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Dickie
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > -----Original Message-----
                                    > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                    > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]
                                    On
                                    > > > Behalf
                                    > > > > > Of
                                    > > > > > > > > > > > sun_spot_mom
                                    > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                    > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                    > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                    > > > installing
                                    > > > > > wuhu
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > It could all be IE7 related...
                                    > > > > > > > > > > > > When I said to go ahead and install IE7, I
                                    had
                                    > > > > > problems
                                    > > > > > > > > > > > connecting.
                                    > > > > > > > > > > > > I went through all services and stuff in
                                    startup
                                    > > > > and
                                    > > > > > it
                                    > > > > > > > > > > appeared
                                    > > > > > > > > > > > that
                                    > > > > > > > > > > > > my camera & printer services interfere with
                                    IE7,
                                    > > > so
                                    > > > > > I
                                    > > > > > > > > stopped
                                    > > > > > > > > > > them
                                    > > > > > > > > > > > > from loading. I will try loading them and
                                    > > > > restarting
                                    > > > > > > and
                                    > > > > > > > > then
                                    > > > > > > > > > > try
                                    > > > > > > > > > > > > the install again.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                    only
                                    > > > > > tried
                                    > > > > > > 212
                                    > > > > > > > &
                                    > > > > > > > > > 214.
                                    > > > > > > > > > > > > Where is 213?
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Thanks
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > --- In
                                    > > > wuhu_software_group@yahoogroups.com, "Brian"
                                    > > > > > > > > <yahoo@>
                                    > > > > > > > > > > > wrote:
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > I was getting the same error when WUHU
                                    would
                                    > > > try
                                    > > > > > to
                                    > > > > > > > load
                                    > > > > > > > > at
                                    > > > > > > > > > > > Windows
                                    > > > > > > > > > > > > > startup. Never really got it resolved
                                    (thought
                                    > > > I
                                    > > > > > did,
                                    > > > > > > > but
                                    > > > > > > > > it
                                    > > > > > > > > > > > > > returned). I figured it was just my
                                    machine. I
                                    > > > do
                                    > > > > > > have
                                    > > > > > > > a
                                    > > > > > > > > > > printer
                                    > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                    > > > loading
                                    > > > > > at
                                    > > > > > > > > > startup
                                    > > > > > > > > > > > prior
                                    > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                    it?
                                    > > > I
                                    > > > > > was
                                    > > > > > > > using
                                    > > > > > > > > > > > version
                                    > > > > > > > > > > > > > 214.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                    and
                                    > > > > > trying
                                    > > > > > > > > 213.
                                    > > > > > > > > > The
                                    > > > > > > > > > > > > > problem seemed to go away. My other problem
                                    > > > > > (serial
                                    > > > > > > > port
                                    > > > > > > > > > > issue
                                    > > > > > > > > > > > with
                                    > > > > > > > > > > > > > console stopping communication with
                                    computer
                                    > > > and
                                    > > > > > > serial
                                    > > > > > > > > port
                                    > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                    > > > when
                                    > > > > I
                                    > > > > > > went
                                    > > > > > > > > > back
                                    > > > > > > > > > > to
                                    > > > > > > > > > > > > 213.
                                    > > > > > > > > > > > > > Can't say for sure though. I will say it
                                    has
                                    > > > been
                                    > > > > > > > almost
                                    > > > > > > > > a
                                    > > > > > > > > > > day
                                    > > > > > > > > > > > now
                                    > > > > > > > > > > > > > without the problems and the problems did
                                    seem
                                    > > > to
                                    > > > > > > start
                                    > > > > > > > > > when I
                                    > > > > > > > > > > > > > installed V214.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > --- In
                                    > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > You must have a printer defined on the
                                    > > > machine
                                    > > > > > to
                                    > > > > > > > > install
                                    > > > > > > > > > > > WUHU.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Go to your control panel, click printers.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > If you do not have one defined, add
                                    printer.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > --- In
                                    > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Please help.
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                    > > > > > > > > > > > > > > > error
                                    > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Then:
                                    > > > > > > > > > > > > > > > WUHU setup
                                    > > > > > > > > > > > > > > > An error occurred during the move data
                                    > > > > > process: -
                                    > > > > > > 119
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Component: DLLs
                                    > > > > > > > > > > > > > > > File group: program DLLs
                                    > > > > > > > > > > > > > > > File: D:\program
                                    files\wuhu\teechart.ocx
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > I have tried both versions of the
                                    download
                                    > > > > > files:
                                    > > > > > > > the
                                    > > > > > > > > > 212
                                    > > > > > > > > > > &
                                    > > > > > > > > > > > 214
                                    > > > > > > > > > > > > > > > versions and I get the same messages.
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                    > > > upload
                                    > > > > > to
                                    > > > > > > > > > > > wunderground.
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Thanks in advance.
                                    > > > > > > > > > > > > > > > Kathy
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > >
                                    > > > > > >
                                    > > > > >
                                    > > > >
                                    > > >
                                    > >
                                    > >
                                    > >
                                    >
                                    >
                                    >
                                    > --
                                    > ============================================================
                                    > John Celenza
                                    > Director of Weather Technology
                                    > Phone (415) 543-5022 x105
                                    > FAX (415) 543-5044
                                    > john@...
                                    > ============================================================
                                    >
                                  Your message has been successfully submitted and would be delivered to recipients shortly.