Loading ...
Sorry, an error occurred while loading the content.
 

Re: Error installing wuhu

Expand Messages
  • steve_03222
    Hi, I have a Lexmark Printer and have no issues, so I would tend to think it is not the type of printer. Steve
    Message 1 of 26 , Jan 1, 2007
      Hi,
      I have a Lexmark Printer and have no issues, so I would tend to think
      it is not the type of printer.

      Steve
    • wuhu_software
      Brian, The problems is the TeeChart ActiveX charting object that is used to diplay the weather data graphs. It is a quite old version that I had paid for way
      Message 2 of 26 , Jan 1, 2007
        Brian,

        The problems is the TeeChart ActiveX charting object that is used to
        diplay the weather data graphs. It is a quite old version that I had
        paid for way back when it first came out (v3.0). There was no
        software update so the only resolution is to have a printer defined,
        otherwise it crashes the entire application.

        I would upgrade the control however now it is a bit pricey (you do
        not get much of a upgrade discount). As I recall, the price was
        somewhere around $250. That is hard to do on a freeware application
        budget.

        My guess is that some of the newer computers with USB printer drivers
        may hesitate when starting Windows. When the ActiveX object attempts
        to open the default printer, and the driver is not fully loaded, the
        control crashes and burns.


        --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@...> wrote:
        >
        > 213 is between 214 and 212 on the dowload page. The link is much
        > closer to the 212 link than the 214 link on the page.
        >
        > I have a Lexmark printer as well. Could this be a problem related to
        > WUHU's recognition of Lexmark printers?
        >
        > Brian
        >
        > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
        > <sun_spot_mom@> wrote:
        > >
        > > It could all be IE7 related...
        > > When I said to go ahead and install IE7, I had problems
        connecting.
        > > I went through all services and stuff in startup and it appeared
        that
        > > my camera & printer services interfere with IE7, so I stopped
        them
        > > from loading. I will try loading them and restarting and then
        try
        > > the install again.
        > >
        > > I also did not see version 213 anywhere. I only tried 212 &
        214.
        > > Where is 213?
        > >
        > > Thanks
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
        wrote:
        > > >
        > > > I was getting the same error when WUHU would try to load at
        Windows
        > > > startup. Never really got it resolved (thought I did, but it
        > > > returned). I figured it was just my machine. I do have a
        printer
        > > > installed...I wonder if my printer wasn't loading at startup
        prior
        > > > to WUHU, therefore it was not recognizing it? I was using
        version
        > > > 214.
        > > >
        > > > I actually decided to try uninstalling 214 and trying 213. The
        > > > problem seemed to go away. My other problem (serial port issue
        with
        > > > console stopping communication with computer and serial port
        > > > indicating it was in use) seemed to go away when I went back to
        > > 213.
        > > > Can't say for sure though. I will say it has been almost a day
        now
        > > > without the problems and the problems did seem to start when I
        > > > installed V214.
        > > >
        > > >
        > > >
        > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        > > > <wuhu_software@> wrote:
        > > > >
        > > > >
        > > > > You must have a printer defined on the machine to install
        WUHU.
        > > > >
        > > > > Go to your control panel, click printers.
        > > > >
        > > > > If you do not have one defined, add printer.
        > > > >
        > > > >
        > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
        > > > > <sun_spot_mom@> wrote:
        > > > > >
        > > > > > Please help.
        > > > > >
        > > > > > When I run install.exe I am getting:
        > > > > > error
        > > > > > Runtime error 217 at 00021AEE
        > > > > >
        > > > > > Then:
        > > > > > WUHU setup
        > > > > > An error occurred during the move data process: -119
        > > > > >
        > > > > > Component: DLLs
        > > > > > File group: program DLLs
        > > > > > File: D:\program files\wuhu\teechart.ocx
        > > > > >
        > > > > > I have tried both versions of the download files: the 212 &
        214
        > > > > > versions and I get the same messages.
        > > > > >
        > > > > > I'm trying to get my LaCrosse 2315 to upload to
        wunderground.
        > > > > >
        > > > > > I have IE7, is that a problem?
        > > > > >
        > > > > > Thanks in advance.
        > > > > > Kathy
        > > > > >
        > > > >
        > > >
        > >
        >
      • wuhu_software
        Kathy, I am not sure which console you have but the next few paragraphs assume you are using a WS-23XX type station. There are a couple of methods you can use
        Message 3 of 26 , Jan 1, 2007
          Kathy,

          I am not sure which console you have but the next few paragraphs
          assume you are using a WS-23XX type station.

          There are a couple of methods you can use to have WUHU intercept data
          from the console.

          The first is quite easy. You run Heavyweather Beta 2.0 (newer than
          the version that ships on CD), you run WUHU, it monitors a file
          called currdat.lst (stored in C:\Heavyweather). Heavweather and WUHU
          must be run at all times otherwise WUHU will not receive the
          currdat.lst file updates. That method is fine if you insist on
          running Heavyweather. Personally, I think Heavyweather is a CPU hog
          (can easily chew up 20-30% of your processor even when idle) so I do
          not run it.

          If you run wired mode (wire between the console and the remote thermo
          unit), your weather data can be updated every 10 seconds or so. In
          this case, you would probably want to run WUHU in direct serial
          communications mode. If you are running wireless mode (no wire
          between the console and remote thermo unit), your weather data will
          only be updated once per minute regardless of the software
          combination you choose.

          When you run WUHU in direct serial mode, you must terminate the
          Heavyweather application. When you choose this method, you must hit
          Stop on WUHU so you can make changes to the settings. In the general
          settings, there is a pulldown combo box. You can select "WS-23XX
          Direct Serial Access", then to the right of the combo box, select the
          communications port that the console is hooked up to. Once the
          changes are made, you hit start. WUHU will then manage the
          communications with the console.

          If you have a WS-36XX type station, WUHU does not support direct
          serial communications at this time so you must run the Heavyweather
          Pro application. Like Heavyweather Beta 2.0, this application will
          write to the currdat.lst file once per minute. As with the first
          method, Heavyweather Pro and WUHU must be running at all times.

          Well, that is the long answer. I hope things are a bit clearer now.


          --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
          <sun_spot_mom@...> wrote:
          >
          > Okay!! That worked...and interestingly IE7 still works, although
          it
          > seems slower.
          > So, now I have it installed, not sure if it's getting the readings,
          > tho. My gauges don't show anything. I did turn on logging to show
          > uploads and console comm. errors. I'm not seeing much in there as
          > yet.
          >
          > Perhaps some tips here would help?
          >
          > I will look at more again maybe tomorrow. I am tired after
          bringing
          > in the new year.
          >
          > Happy New Year!
          > Thanks for your help.
          > Kathy
          >
          > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie Bradford
          > >>>>>" <dbradford@> wrote:
          > >
          > > I had this problem a few days ago with windows 2000, I had a
          > printer
          > > installed and everytime i started WUHU it said I needed a
          printer,
          > what I
          > > did was deleted the printer, rebooted and reinstalled the printer
          > again and
          > > the reinstalled WUHU and it has not acted up since.
          > >
          > > Dickie
          > >
          > > -----Original Message-----
          > > From: wuhu_software_group@yahoogroups.com
          > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
          > sun_spot_mom
          > > Sent: Monday, January 01, 2007 8:04 PM
          > > To: wuhu_software_group@yahoogroups.com
          > > Subject: [wuhu_software_group] Re: Error installing wuhu
          > >
          > >
          > > It could all be IE7 related...
          > > When I said to go ahead and install IE7, I had problems
          > connecting.
          > > I went through all services and stuff in startup and it
          appeared
          > that
          > > my camera & printer services interfere with IE7, so I stopped
          them
          > > from loading. I will try loading them and restarting and then
          try
          > > the install again.
          > >
          > > I also did not see version 213 anywhere. I only tried 212 & 214.
          > > Where is 213?
          > >
          > > Thanks
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
          > wrote:
          > > >
          > > > I was getting the same error when WUHU would try to load at
          > Windows
          > > > startup. Never really got it resolved (thought I did, but it
          > > > returned). I figured it was just my machine. I do have a
          printer
          > > > installed...I wonder if my printer wasn't loading at startup
          > prior
          > > > to WUHU, therefore it was not recognizing it? I was using
          > version
          > > > 214.
          > > >
          > > > I actually decided to try uninstalling 214 and trying 213. The
          > > > problem seemed to go away. My other problem (serial port
          issue
          > with
          > > > console stopping communication with computer and serial port
          > > > indicating it was in use) seemed to go away when I went back
          to
          > > 213.
          > > > Can't say for sure though. I will say it has been almost a
          day
          > now
          > > > without the problems and the problems did seem to start when I
          > > > installed V214.
          > > >
          > > >
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
          > > > <wuhu_software@> wrote:
          > > > >
          > > > >
          > > > > You must have a printer defined on the machine to install
          > WUHU.
          > > > >
          > > > > Go to your control panel, click printers.
          > > > >
          > > > > If you do not have one defined, add printer.
          > > > >
          > > > >
          > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
          > > > > <sun_spot_mom@> wrote:
          > > > > >
          > > > > > Please help.
          > > > > >
          > > > > > When I run install.exe I am getting:
          > > > > > error
          > > > > > Runtime error 217 at 00021AEE
          > > > > >
          > > > > > Then:
          > > > > > WUHU setup
          > > > > > An error occurred during the move data process: -119
          > > > > >
          > > > > > Component: DLLs
          > > > > > File group: program DLLs
          > > > > > File: D:\program files\wuhu\teechart.ocx
          > > > > >
          > > > > > I have tried both versions of the download files: the 212
          &
          > 214
          > > > > > versions and I get the same messages.
          > > > > >
          > > > > > I'm trying to get my LaCrosse 2315 to upload to
          > wunderground.
          > > > > >
          > > > > > I have IE7, is that a problem?
          > > > > >
          > > > > > Thanks in advance.
          > > > > > Kathy
          > > > > >
          > > > >
          > > >
          > >
          >
        • sun_spot_mom
          I do believe that it will work now (except for a minor problem, I don t think I know my ID, duh). Where do I locate my PWS ID? I ve been looking at the member
          Message 4 of 26 , Jan 2, 2007
            I do believe that it will work now (except for a minor problem, I
            don't think I know my ID, duh). Where do I locate my PWS ID? I've
            been looking at the member settings and do not see it. I think its
            KIL something... I was using my "handle" for the ID.

            My gauges are showing activity. I just need to see it upload.
            The problem was during the install of wuhu I chose to install in
            d:\ . Since it asked I thought it would be okay to put it there.

            Check out the weather for 60964 coming soon!

            Thanks again.
            Kathy



            --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            <wuhu_software@...> wrote:
            >
            > Kathy,
            >
            > I am not sure which console you have but the next few paragraphs
            > assume you are using a WS-23XX type station.
            >
            > There are a couple of methods you can use to have WUHU intercept
            data
            > from the console.
            >
            > The first is quite easy. You run Heavyweather Beta 2.0 (newer than
            > the version that ships on CD), you run WUHU, it monitors a file
            > called currdat.lst (stored in C:\Heavyweather). Heavweather and
            WUHU
            > must be run at all times otherwise WUHU will not receive the
            > currdat.lst file updates. That method is fine if you insist on
            > running Heavyweather. Personally, I think Heavyweather is a CPU hog
            > (can easily chew up 20-30% of your processor even when idle) so I
            do
            > not run it.
            >
            > If you run wired mode (wire between the console and the remote
            thermo
            > unit), your weather data can be updated every 10 seconds or so. In
            > this case, you would probably want to run WUHU in direct serial
            > communications mode. If you are running wireless mode (no wire
            > between the console and remote thermo unit), your weather data will
            > only be updated once per minute regardless of the software
            > combination you choose.
            >
            > When you run WUHU in direct serial mode, you must terminate the
            > Heavyweather application. When you choose this method, you must hit
            > Stop on WUHU so you can make changes to the settings. In the
            general
            > settings, there is a pulldown combo box. You can select "WS-23XX
            > Direct Serial Access", then to the right of the combo box, select
            the
            > communications port that the console is hooked up to. Once the
            > changes are made, you hit start. WUHU will then manage the
            > communications with the console.
            >
            > If you have a WS-36XX type station, WUHU does not support direct
            > serial communications at this time so you must run the Heavyweather
            > Pro application. Like Heavyweather Beta 2.0, this application will
            > write to the currdat.lst file once per minute. As with the first
            > method, Heavyweather Pro and WUHU must be running at all times.
            >
            > Well, that is the long answer. I hope things are a bit clearer now.
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
            > <sun_spot_mom@> wrote:
            > >
            > > Okay!! That worked...and interestingly IE7 still works, although
            > it
            > > seems slower.
            > > So, now I have it installed, not sure if it's getting the
            readings,
            > > tho. My gauges don't show anything. I did turn on logging to
            show
            > > uploads and console comm. errors. I'm not seeing much in there as
            > > yet.
            > >
            > > Perhaps some tips here would help?
            > >
            > > I will look at more again maybe tomorrow. I am tired after
            > bringing
            > > in the new year.
            > >
            > > Happy New Year!
            > > Thanks for your help.
            > > Kathy
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
            Bradford
            > > >>>>>" <dbradford@> wrote:
            > > >
            > > > I had this problem a few days ago with windows 2000, I had a
            > > printer
            > > > installed and everytime i started WUHU it said I needed a
            > printer,
            > > what I
            > > > did was deleted the printer, rebooted and reinstalled the
            printer
            > > again and
            > > > the reinstalled WUHU and it has not acted up since.
            > > >
            > > > Dickie
            > > >
            > > > -----Original Message-----
            > > > From: wuhu_software_group@yahoogroups.com
            > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
            > > sun_spot_mom
            > > > Sent: Monday, January 01, 2007 8:04 PM
            > > > To: wuhu_software_group@yahoogroups.com
            > > > Subject: [wuhu_software_group] Re: Error installing wuhu
            > > >
            > > >
            > > > It could all be IE7 related...
            > > > When I said to go ahead and install IE7, I had problems
            > > connecting.
            > > > I went through all services and stuff in startup and it
            > appeared
            > > that
            > > > my camera & printer services interfere with IE7, so I stopped
            > them
            > > > from loading. I will try loading them and restarting and then
            > try
            > > > the install again.
            > > >
            > > > I also did not see version 213 anywhere. I only tried 212 &
            214.
            > > > Where is 213?
            > > >
            > > > Thanks
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
            > > wrote:
            > > > >
            > > > > I was getting the same error when WUHU would try to load at
            > > Windows
            > > > > startup. Never really got it resolved (thought I did, but it
            > > > > returned). I figured it was just my machine. I do have a
            > printer
            > > > > installed...I wonder if my printer wasn't loading at
            startup
            > > prior
            > > > > to WUHU, therefore it was not recognizing it? I was using
            > > version
            > > > > 214.
            > > > >
            > > > > I actually decided to try uninstalling 214 and trying 213.
            The
            > > > > problem seemed to go away. My other problem (serial port
            > issue
            > > with
            > > > > console stopping communication with computer and serial port
            > > > > indicating it was in use) seemed to go away when I went
            back
            > to
            > > > 213.
            > > > > Can't say for sure though. I will say it has been almost a
            > day
            > > now
            > > > > without the problems and the problems did seem to start
            when I
            > > > > installed V214.
            > > > >
            > > > >
            > > > >
            > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
            > > > > <wuhu_software@> wrote:
            > > > > >
            > > > > >
            > > > > > You must have a printer defined on the machine to install
            > > WUHU.
            > > > > >
            > > > > > Go to your control panel, click printers.
            > > > > >
            > > > > > If you do not have one defined, add printer.
            > > > > >
            > > > > >
            > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
            > > > > > <sun_spot_mom@> wrote:
            > > > > > >
            > > > > > > Please help.
            > > > > > >
            > > > > > > When I run install.exe I am getting:
            > > > > > > error
            > > > > > > Runtime error 217 at 00021AEE
            > > > > > >
            > > > > > > Then:
            > > > > > > WUHU setup
            > > > > > > An error occurred during the move data process: -119
            > > > > > >
            > > > > > > Component: DLLs
            > > > > > > File group: program DLLs
            > > > > > > File: D:\program files\wuhu\teechart.ocx
            > > > > > >
            > > > > > > I have tried both versions of the download files: the
            212
            > &
            > > 214
            > > > > > > versions and I get the same messages.
            > > > > > >
            > > > > > > I'm trying to get my LaCrosse 2315 to upload to
            > > wunderground.
            > > > > > >
            > > > > > > I have IE7, is that a problem?
            > > > > > >
            > > > > > > Thanks in advance.
            > > > > > > Kathy
            > > > > > >
            > > > > >
            > > > >
            > > >
            > >
            >
          • steve_03222
            Kathy, If you click on MY Stations on the left it shoould bring you to a screen that will show your station ID. If you are logged in as a member at WU. Steve
            Message 5 of 26 , Jan 2, 2007
              Kathy,
              If you click on "MY Stations" on the left it shoould bring you to a
              screen that will show your station ID. If you are logged in as a
              member at WU.

              Steve
            • wuhu_software
              Kathy, Sounds like you are almost there... Go to the Weather Underground site and log in with your WU email and password. Once you are logged in, there is a
              Message 6 of 26 , Jan 2, 2007
                Kathy,

                Sounds like you are almost there...

                Go to the Weather Underground site and log in with your WU email and
                password.

                Once you are logged in, there is a "My Stations" link. Click it.

                On the next page you will see something like:

                Current Stations
                ID: KMI????? | data

                Your station id follows ID:

                The password entered in to WUHU is the same as you use for your
                normal WU account. It *is* case sensitive.


                --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                <sun_spot_mom@...> wrote:
                >
                > I do believe that it will work now (except for a minor problem, I
                > don't think I know my ID, duh). Where do I locate my PWS ID? I've
                > been looking at the member settings and do not see it. I think its
                > KIL something... I was using my "handle" for the ID.
                >
                > My gauges are showing activity. I just need to see it upload.
                > The problem was during the install of wuhu I chose to install in
                > d:\ . Since it asked I thought it would be okay to put it there.
                >
                > Check out the weather for 60964 coming soon!
                >
                > Thanks again.
                > Kathy
                >
                >
                >
                > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                > <wuhu_software@> wrote:
                > >
                > > Kathy,
                > >
                > > I am not sure which console you have but the next few paragraphs
                > > assume you are using a WS-23XX type station.
                > >
                > > There are a couple of methods you can use to have WUHU intercept
                > data
                > > from the console.
                > >
                > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                than
                > > the version that ships on CD), you run WUHU, it monitors a file
                > > called currdat.lst (stored in C:\Heavyweather). Heavweather and
                > WUHU
                > > must be run at all times otherwise WUHU will not receive the
                > > currdat.lst file updates. That method is fine if you insist on
                > > running Heavyweather. Personally, I think Heavyweather is a CPU
                hog
                > > (can easily chew up 20-30% of your processor even when idle) so I
                > do
                > > not run it.
                > >
                > > If you run wired mode (wire between the console and the remote
                > thermo
                > > unit), your weather data can be updated every 10 seconds or so.
                In
                > > this case, you would probably want to run WUHU in direct serial
                > > communications mode. If you are running wireless mode (no wire
                > > between the console and remote thermo unit), your weather data
                will
                > > only be updated once per minute regardless of the software
                > > combination you choose.
                > >
                > > When you run WUHU in direct serial mode, you must terminate the
                > > Heavyweather application. When you choose this method, you must
                hit
                > > Stop on WUHU so you can make changes to the settings. In the
                > general
                > > settings, there is a pulldown combo box. You can select "WS-23XX
                > > Direct Serial Access", then to the right of the combo box, select
                > the
                > > communications port that the console is hooked up to. Once the
                > > changes are made, you hit start. WUHU will then manage the
                > > communications with the console.
                > >
                > > If you have a WS-36XX type station, WUHU does not support direct
                > > serial communications at this time so you must run the
                Heavyweather
                > > Pro application. Like Heavyweather Beta 2.0, this application
                will
                > > write to the currdat.lst file once per minute. As with the first
                > > method, Heavyweather Pro and WUHU must be running at all times.
                > >
                > > Well, that is the long answer. I hope things are a bit clearer
                now.
                > >
                > >
                > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                > > <sun_spot_mom@> wrote:
                > > >
                > > > Okay!! That worked...and interestingly IE7 still works,
                although
                > > it
                > > > seems slower.
                > > > So, now I have it installed, not sure if it's getting the
                > readings,
                > > > tho. My gauges don't show anything. I did turn on logging to
                > show
                > > > uploads and console comm. errors. I'm not seeing much in there
                as
                > > > yet.
                > > >
                > > > Perhaps some tips here would help?
                > > >
                > > > I will look at more again maybe tomorrow. I am tired after
                > > bringing
                > > > in the new year.
                > > >
                > > > Happy New Year!
                > > > Thanks for your help.
                > > > Kathy
                > > >
                > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                > Bradford
                > > > >>>>>" <dbradford@> wrote:
                > > > >
                > > > > I had this problem a few days ago with windows 2000, I had a
                > > > printer
                > > > > installed and everytime i started WUHU it said I needed a
                > > printer,
                > > > what I
                > > > > did was deleted the printer, rebooted and reinstalled the
                > printer
                > > > again and
                > > > > the reinstalled WUHU and it has not acted up since.
                > > > >
                > > > > Dickie
                > > > >
                > > > > -----Original Message-----
                > > > > From: wuhu_software_group@yahoogroups.com
                > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                > > > sun_spot_mom
                > > > > Sent: Monday, January 01, 2007 8:04 PM
                > > > > To: wuhu_software_group@yahoogroups.com
                > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                > > > >
                > > > >
                > > > > It could all be IE7 related...
                > > > > When I said to go ahead and install IE7, I had problems
                > > > connecting.
                > > > > I went through all services and stuff in startup and it
                > > appeared
                > > > that
                > > > > my camera & printer services interfere with IE7, so I
                stopped
                > > them
                > > > > from loading. I will try loading them and restarting and
                then
                > > try
                > > > > the install again.
                > > > >
                > > > > I also did not see version 213 anywhere. I only tried 212 &
                > 214.
                > > > > Where is 213?
                > > > >
                > > > > Thanks
                > > > >
                > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                <yahoo@>
                > > > wrote:
                > > > > >
                > > > > > I was getting the same error when WUHU would try to load
                at
                > > > Windows
                > > > > > startup. Never really got it resolved (thought I did, but
                it
                > > > > > returned). I figured it was just my machine. I do have a
                > > printer
                > > > > > installed...I wonder if my printer wasn't loading at
                > startup
                > > > prior
                > > > > > to WUHU, therefore it was not recognizing it? I was using
                > > > version
                > > > > > 214.
                > > > > >
                > > > > > I actually decided to try uninstalling 214 and trying
                213.
                > The
                > > > > > problem seemed to go away. My other problem (serial port
                > > issue
                > > > with
                > > > > > console stopping communication with computer and serial
                port
                > > > > > indicating it was in use) seemed to go away when I went
                > back
                > > to
                > > > > 213.
                > > > > > Can't say for sure though. I will say it has been almost
                a
                > > day
                > > > now
                > > > > > without the problems and the problems did seem to start
                > when I
                > > > > > installed V214.
                > > > > >
                > > > > >
                > > > > >
                > > > > > --- In
                wuhu_software_group@yahoogroups.com, "wuhu_software"
                > > > > > <wuhu_software@> wrote:
                > > > > > >
                > > > > > >
                > > > > > > You must have a printer defined on the machine to
                install
                > > > WUHU.
                > > > > > >
                > > > > > > Go to your control panel, click printers.
                > > > > > >
                > > > > > > If you do not have one defined, add printer.
                > > > > > >
                > > > > > >
                > > > > > > --- In
                wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                > > > > > > <sun_spot_mom@> wrote:
                > > > > > > >
                > > > > > > > Please help.
                > > > > > > >
                > > > > > > > When I run install.exe I am getting:
                > > > > > > > error
                > > > > > > > Runtime error 217 at 00021AEE
                > > > > > > >
                > > > > > > > Then:
                > > > > > > > WUHU setup
                > > > > > > > An error occurred during the move data process: -119
                > > > > > > >
                > > > > > > > Component: DLLs
                > > > > > > > File group: program DLLs
                > > > > > > > File: D:\program files\wuhu\teechart.ocx
                > > > > > > >
                > > > > > > > I have tried both versions of the download files: the
                > 212
                > > &
                > > > 214
                > > > > > > > versions and I get the same messages.
                > > > > > > >
                > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                > > > wunderground.
                > > > > > > >
                > > > > > > > I have IE7, is that a problem?
                > > > > > > >
                > > > > > > > Thanks in advance.
                > > > > > > > Kathy
                > > > > > > >
                > > > > > >
                > > > > >
                > > > >
                > > >
                > >
                >
              • sun_spot_mom
                Steve Finally found another post with where to locate it. Sorry to have bothered you again. I m hoping this is all good to go now. Just waiting to see it
                Message 7 of 26 , Jan 2, 2007
                  Steve
                  Finally found another post with where to locate it. Sorry to have
                  bothered you again.
                  I'm hoping this is all good to go now. Just waiting to see it upload
                  now.

                  Thanks again.
                  Kathy

                  --- In wuhu_software_group@yahoogroups.com, "steve_03222"
                  <steve_03222@...> wrote:
                  >
                  > Kathy,
                  > If you click on "MY Stations" on the left it shoould bring you to a
                  > screen that will show your station ID. If you are logged in as a
                  > member at WU.
                  >
                  > Steve
                  >
                • sun_spot_mom
                  Check out the weather at 60964! Thanks much for all of your help. Kathy
                  Message 8 of 26 , Jan 2, 2007
                    Check out the weather at 60964!
                    Thanks much for all of your help.

                    Kathy
                    --- In wuhu_software_group@yahoogroups.com, "steve_03222"
                    <steve_03222@...> wrote:
                    >
                    > Kathy,
                    > If you click on "MY Stations" on the left it shoould bring you to a
                    > screen that will show your station ID. If you are logged in as a
                    > member at WU.
                    >
                    > Steve
                    >
                  • sun_spot_mom
                    Yes, I logged in and saw my data. Do I have to wait a day to see it when I type in my zipcode? Thanks much. ... Kathy ... and ... its ... there. ...
                    Message 9 of 26 , Jan 2, 2007
                      Yes, I logged in and saw my data. Do I have to wait a day to see it
                      when I type in my zipcode?

                      Thanks much.
                      :>)
                      Kathy

                      --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      <wuhu_software@...> wrote:
                      >
                      >
                      > Kathy,
                      >
                      > Sounds like you are almost there...
                      >
                      > Go to the Weather Underground site and log in with your WU email
                      and
                      > password.
                      >
                      > Once you are logged in, there is a "My Stations" link. Click it.
                      >
                      > On the next page you will see something like:
                      >
                      > Current Stations
                      > ID: KMI????? | data
                      >
                      > Your station id follows ID:
                      >
                      > The password entered in to WUHU is the same as you use for your
                      > normal WU account. It *is* case sensitive.
                      >
                      >
                      > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > <sun_spot_mom@> wrote:
                      > >
                      > > I do believe that it will work now (except for a minor problem, I
                      > > don't think I know my ID, duh). Where do I locate my PWS ID? I've
                      > > been looking at the member settings and do not see it. I think
                      its
                      > > KIL something... I was using my "handle" for the ID.
                      > >
                      > > My gauges are showing activity. I just need to see it upload.
                      > > The problem was during the install of wuhu I chose to install in
                      > > d:\ . Since it asked I thought it would be okay to put it
                      there.
                      > >
                      > > Check out the weather for 60964 coming soon!
                      > >
                      > > Thanks again.
                      > > Kathy
                      > >
                      > >
                      > >
                      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > <wuhu_software@> wrote:
                      > > >
                      > > > Kathy,
                      > > >
                      > > > I am not sure which console you have but the next few
                      paragraphs
                      > > > assume you are using a WS-23XX type station.
                      > > >
                      > > > There are a couple of methods you can use to have WUHU
                      intercept
                      > > data
                      > > > from the console.
                      > > >
                      > > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                      > than
                      > > > the version that ships on CD), you run WUHU, it monitors a file
                      > > > called currdat.lst (stored in C:\Heavyweather). Heavweather and
                      > > WUHU
                      > > > must be run at all times otherwise WUHU will not receive the
                      > > > currdat.lst file updates. That method is fine if you insist on
                      > > > running Heavyweather. Personally, I think Heavyweather is a CPU
                      > hog
                      > > > (can easily chew up 20-30% of your processor even when idle) so
                      I
                      > > do
                      > > > not run it.
                      > > >
                      > > > If you run wired mode (wire between the console and the remote
                      > > thermo
                      > > > unit), your weather data can be updated every 10 seconds or so.
                      > In
                      > > > this case, you would probably want to run WUHU in direct serial
                      > > > communications mode. If you are running wireless mode (no wire
                      > > > between the console and remote thermo unit), your weather data
                      > will
                      > > > only be updated once per minute regardless of the software
                      > > > combination you choose.
                      > > >
                      > > > When you run WUHU in direct serial mode, you must terminate the
                      > > > Heavyweather application. When you choose this method, you must
                      > hit
                      > > > Stop on WUHU so you can make changes to the settings. In the
                      > > general
                      > > > settings, there is a pulldown combo box. You can select "WS-
                      23XX
                      > > > Direct Serial Access", then to the right of the combo box,
                      select
                      > > the
                      > > > communications port that the console is hooked up to. Once the
                      > > > changes are made, you hit start. WUHU will then manage the
                      > > > communications with the console.
                      > > >
                      > > > If you have a WS-36XX type station, WUHU does not support
                      direct
                      > > > serial communications at this time so you must run the
                      > Heavyweather
                      > > > Pro application. Like Heavyweather Beta 2.0, this application
                      > will
                      > > > write to the currdat.lst file once per minute. As with the
                      first
                      > > > method, Heavyweather Pro and WUHU must be running at all times.
                      > > >
                      > > > Well, that is the long answer. I hope things are a bit clearer
                      > now.
                      > > >
                      > > >
                      > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > > <sun_spot_mom@> wrote:
                      > > > >
                      > > > > Okay!! That worked...and interestingly IE7 still works,
                      > although
                      > > > it
                      > > > > seems slower.
                      > > > > So, now I have it installed, not sure if it's getting the
                      > > readings,
                      > > > > tho. My gauges don't show anything. I did turn on logging to
                      > > show
                      > > > > uploads and console comm. errors. I'm not seeing much in
                      there
                      > as
                      > > > > yet.
                      > > > >
                      > > > > Perhaps some tips here would help?
                      > > > >
                      > > > > I will look at more again maybe tomorrow. I am tired after
                      > > > bringing
                      > > > > in the new year.
                      > > > >
                      > > > > Happy New Year!
                      > > > > Thanks for your help.
                      > > > > Kathy
                      > > > >
                      > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                      > > Bradford
                      > > > > >>>>>" <dbradford@> wrote:
                      > > > > >
                      > > > > > I had this problem a few days ago with windows 2000, I had
                      a
                      > > > > printer
                      > > > > > installed and everytime i started WUHU it said I needed a
                      > > > printer,
                      > > > > what I
                      > > > > > did was deleted the printer, rebooted and reinstalled the
                      > > printer
                      > > > > again and
                      > > > > > the reinstalled WUHU and it has not acted up since.
                      > > > > >
                      > > > > > Dickie
                      > > > > >
                      > > > > > -----Original Message-----
                      > > > > > From: wuhu_software_group@yahoogroups.com
                      > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                      > > > > sun_spot_mom
                      > > > > > Sent: Monday, January 01, 2007 8:04 PM
                      > > > > > To: wuhu_software_group@yahoogroups.com
                      > > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                      > > > > >
                      > > > > >
                      > > > > > It could all be IE7 related...
                      > > > > > When I said to go ahead and install IE7, I had problems
                      > > > > connecting.
                      > > > > > I went through all services and stuff in startup and it
                      > > > appeared
                      > > > > that
                      > > > > > my camera & printer services interfere with IE7, so I
                      > stopped
                      > > > them
                      > > > > > from loading. I will try loading them and restarting and
                      > then
                      > > > try
                      > > > > > the install again.
                      > > > > >
                      > > > > > I also did not see version 213 anywhere. I only tried 212
                      &
                      > > 214.
                      > > > > > Where is 213?
                      > > > > >
                      > > > > > Thanks
                      > > > > >
                      > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                      > <yahoo@>
                      > > > > wrote:
                      > > > > > >
                      > > > > > > I was getting the same error when WUHU would try to
                      load
                      > at
                      > > > > Windows
                      > > > > > > startup. Never really got it resolved (thought I did,
                      but
                      > it
                      > > > > > > returned). I figured it was just my machine. I do have
                      a
                      > > > printer
                      > > > > > > installed...I wonder if my printer wasn't loading at
                      > > startup
                      > > > > prior
                      > > > > > > to WUHU, therefore it was not recognizing it? I was
                      using
                      > > > > version
                      > > > > > > 214.
                      > > > > > >
                      > > > > > > I actually decided to try uninstalling 214 and trying
                      > 213.
                      > > The
                      > > > > > > problem seemed to go away. My other problem (serial
                      port
                      > > > issue
                      > > > > with
                      > > > > > > console stopping communication with computer and serial
                      > port
                      > > > > > > indicating it was in use) seemed to go away when I went
                      > > back
                      > > > to
                      > > > > > 213.
                      > > > > > > Can't say for sure though. I will say it has been
                      almost
                      > a
                      > > > day
                      > > > > now
                      > > > > > > without the problems and the problems did seem to start
                      > > when I
                      > > > > > > installed V214.
                      > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > > > --- In
                      > wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > > > > > <wuhu_software@> wrote:
                      > > > > > > >
                      > > > > > > >
                      > > > > > > > You must have a printer defined on the machine to
                      > install
                      > > > > WUHU.
                      > > > > > > >
                      > > > > > > > Go to your control panel, click printers.
                      > > > > > > >
                      > > > > > > > If you do not have one defined, add printer.
                      > > > > > > >
                      > > > > > > >
                      > > > > > > > --- In
                      > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > > > > > > <sun_spot_mom@> wrote:
                      > > > > > > > >
                      > > > > > > > > Please help.
                      > > > > > > > >
                      > > > > > > > > When I run install.exe I am getting:
                      > > > > > > > > error
                      > > > > > > > > Runtime error 217 at 00021AEE
                      > > > > > > > >
                      > > > > > > > > Then:
                      > > > > > > > > WUHU setup
                      > > > > > > > > An error occurred during the move data process: -119
                      > > > > > > > >
                      > > > > > > > > Component: DLLs
                      > > > > > > > > File group: program DLLs
                      > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                      > > > > > > > >
                      > > > > > > > > I have tried both versions of the download files:
                      the
                      > > 212
                      > > > &
                      > > > > 214
                      > > > > > > > > versions and I get the same messages.
                      > > > > > > > >
                      > > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                      > > > > wunderground.
                      > > > > > > > >
                      > > > > > > > > I have IE7, is that a problem?
                      > > > > > > > >
                      > > > > > > > > Thanks in advance.
                      > > > > > > > > Kathy
                      > > > > > > > >
                      > > > > > > >
                      > > > > > >
                      > > > > >
                      > > > >
                      > > >
                      > >
                      >
                    • wuhu_software
                      Kathy, What is your WU Station ID? Tried looking it up by zipcode, did not see yours in there. There was another WUHU station but it has been uploading for
                      Message 10 of 26 , Jan 2, 2007
                        Kathy,

                        What is your WU Station ID?

                        Tried looking it up by zipcode, did not see yours in there.

                        There was another WUHU station but it has been uploading for some
                        time.


                        --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        <sun_spot_mom@...> wrote:
                        >
                        > Yes, I logged in and saw my data. Do I have to wait a day to see
                        it
                        > when I type in my zipcode?
                        >
                        > Thanks much.
                        > :>)
                        > Kathy
                        >
                        > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > <wuhu_software@> wrote:
                        > >
                        > >
                        > > Kathy,
                        > >
                        > > Sounds like you are almost there...
                        > >
                        > > Go to the Weather Underground site and log in with your WU email
                        > and
                        > > password.
                        > >
                        > > Once you are logged in, there is a "My Stations" link. Click it.
                        > >
                        > > On the next page you will see something like:
                        > >
                        > > Current Stations
                        > > ID: KMI????? | data
                        > >
                        > > Your station id follows ID:
                        > >
                        > > The password entered in to WUHU is the same as you use for your
                        > > normal WU account. It *is* case sensitive.
                        > >
                        > >
                        > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > <sun_spot_mom@> wrote:
                        > > >
                        > > > I do believe that it will work now (except for a minor problem,
                        I
                        > > > don't think I know my ID, duh). Where do I locate my PWS ID?
                        I've
                        > > > been looking at the member settings and do not see it. I think
                        > its
                        > > > KIL something... I was using my "handle" for the ID.
                        > > >
                        > > > My gauges are showing activity. I just need to see it upload.
                        > > > The problem was during the install of wuhu I chose to install
                        in
                        > > > d:\ . Since it asked I thought it would be okay to put it
                        > there.
                        > > >
                        > > > Check out the weather for 60964 coming soon!
                        > > >
                        > > > Thanks again.
                        > > > Kathy
                        > > >
                        > > >
                        > > >
                        > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > > > <wuhu_software@> wrote:
                        > > > >
                        > > > > Kathy,
                        > > > >
                        > > > > I am not sure which console you have but the next few
                        > paragraphs
                        > > > > assume you are using a WS-23XX type station.
                        > > > >
                        > > > > There are a couple of methods you can use to have WUHU
                        > intercept
                        > > > data
                        > > > > from the console.
                        > > > >
                        > > > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                        > > than
                        > > > > the version that ships on CD), you run WUHU, it monitors a
                        file
                        > > > > called currdat.lst (stored in C:\Heavyweather). Heavweather
                        and
                        > > > WUHU
                        > > > > must be run at all times otherwise WUHU will not receive the
                        > > > > currdat.lst file updates. That method is fine if you insist
                        on
                        > > > > running Heavyweather. Personally, I think Heavyweather is a
                        CPU
                        > > hog
                        > > > > (can easily chew up 20-30% of your processor even when idle)
                        so
                        > I
                        > > > do
                        > > > > not run it.
                        > > > >
                        > > > > If you run wired mode (wire between the console and the
                        remote
                        > > > thermo
                        > > > > unit), your weather data can be updated every 10 seconds or
                        so.
                        > > In
                        > > > > this case, you would probably want to run WUHU in direct
                        serial
                        > > > > communications mode. If you are running wireless mode (no
                        wire
                        > > > > between the console and remote thermo unit), your weather
                        data
                        > > will
                        > > > > only be updated once per minute regardless of the software
                        > > > > combination you choose.
                        > > > >
                        > > > > When you run WUHU in direct serial mode, you must terminate
                        the
                        > > > > Heavyweather application. When you choose this method, you
                        must
                        > > hit
                        > > > > Stop on WUHU so you can make changes to the settings. In the
                        > > > general
                        > > > > settings, there is a pulldown combo box. You can select "WS-
                        > 23XX
                        > > > > Direct Serial Access", then to the right of the combo box,
                        > select
                        > > > the
                        > > > > communications port that the console is hooked up to. Once
                        the
                        > > > > changes are made, you hit start. WUHU will then manage the
                        > > > > communications with the console.
                        > > > >
                        > > > > If you have a WS-36XX type station, WUHU does not support
                        > direct
                        > > > > serial communications at this time so you must run the
                        > > Heavyweather
                        > > > > Pro application. Like Heavyweather Beta 2.0, this application
                        > > will
                        > > > > write to the currdat.lst file once per minute. As with the
                        > first
                        > > > > method, Heavyweather Pro and WUHU must be running at all
                        times.
                        > > > >
                        > > > > Well, that is the long answer. I hope things are a bit
                        clearer
                        > > now.
                        > > > >
                        > > > >
                        > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > > > <sun_spot_mom@> wrote:
                        > > > > >
                        > > > > > Okay!! That worked...and interestingly IE7 still works,
                        > > although
                        > > > > it
                        > > > > > seems slower.
                        > > > > > So, now I have it installed, not sure if it's getting the
                        > > > readings,
                        > > > > > tho. My gauges don't show anything. I did turn on logging
                        to
                        > > > show
                        > > > > > uploads and console comm. errors. I'm not seeing much in
                        > there
                        > > as
                        > > > > > yet.
                        > > > > >
                        > > > > > Perhaps some tips here would help?
                        > > > > >
                        > > > > > I will look at more again maybe tomorrow. I am tired after
                        > > > > bringing
                        > > > > > in the new year.
                        > > > > >
                        > > > > > Happy New Year!
                        > > > > > Thanks for your help.
                        > > > > > Kathy
                        > > > > >
                        > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                        > > > Bradford
                        > > > > > >>>>>" <dbradford@> wrote:
                        > > > > > >
                        > > > > > > I had this problem a few days ago with windows 2000, I
                        had
                        > a
                        > > > > > printer
                        > > > > > > installed and everytime i started WUHU it said I needed
                        a
                        > > > > printer,
                        > > > > > what I
                        > > > > > > did was deleted the printer, rebooted and reinstalled the
                        > > > printer
                        > > > > > again and
                        > > > > > > the reinstalled WUHU and it has not acted up since.
                        > > > > > >
                        > > > > > > Dickie
                        > > > > > >
                        > > > > > > -----Original Message-----
                        > > > > > > From: wuhu_software_group@yahoogroups.com
                        > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                        > > > > > sun_spot_mom
                        > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                        > > > > > > To: wuhu_software_group@yahoogroups.com
                        > > > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                        > > > > > >
                        > > > > > >
                        > > > > > > It could all be IE7 related...
                        > > > > > > When I said to go ahead and install IE7, I had problems
                        > > > > > connecting.
                        > > > > > > I went through all services and stuff in startup and it
                        > > > > appeared
                        > > > > > that
                        > > > > > > my camera & printer services interfere with IE7, so I
                        > > stopped
                        > > > > them
                        > > > > > > from loading. I will try loading them and restarting
                        and
                        > > then
                        > > > > try
                        > > > > > > the install again.
                        > > > > > >
                        > > > > > > I also did not see version 213 anywhere. I only tried
                        212
                        > &
                        > > > 214.
                        > > > > > > Where is 213?
                        > > > > > >
                        > > > > > > Thanks
                        > > > > > >
                        > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                        > > <yahoo@>
                        > > > > > wrote:
                        > > > > > > >
                        > > > > > > > I was getting the same error when WUHU would try to
                        > load
                        > > at
                        > > > > > Windows
                        > > > > > > > startup. Never really got it resolved (thought I did,
                        > but
                        > > it
                        > > > > > > > returned). I figured it was just my machine. I do
                        have
                        > a
                        > > > > printer
                        > > > > > > > installed...I wonder if my printer wasn't loading at
                        > > > startup
                        > > > > > prior
                        > > > > > > > to WUHU, therefore it was not recognizing it? I was
                        > using
                        > > > > > version
                        > > > > > > > 214.
                        > > > > > > >
                        > > > > > > > I actually decided to try uninstalling 214 and trying
                        > > 213.
                        > > > The
                        > > > > > > > problem seemed to go away. My other problem (serial
                        > port
                        > > > > issue
                        > > > > > with
                        > > > > > > > console stopping communication with computer and
                        serial
                        > > port
                        > > > > > > > indicating it was in use) seemed to go away when I
                        went
                        > > > back
                        > > > > to
                        > > > > > > 213.
                        > > > > > > > Can't say for sure though. I will say it has been
                        > almost
                        > > a
                        > > > > day
                        > > > > > now
                        > > > > > > > without the problems and the problems did seem to
                        start
                        > > > when I
                        > > > > > > > installed V214.
                        > > > > > > >
                        > > > > > > >
                        > > > > > > >
                        > > > > > > > --- In
                        > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                        > > > > > > > <wuhu_software@> wrote:
                        > > > > > > > >
                        > > > > > > > >
                        > > > > > > > > You must have a printer defined on the machine to
                        > > install
                        > > > > > WUHU.
                        > > > > > > > >
                        > > > > > > > > Go to your control panel, click printers.
                        > > > > > > > >
                        > > > > > > > > If you do not have one defined, add printer.
                        > > > > > > > >
                        > > > > > > > >
                        > > > > > > > > --- In
                        > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                        > > > > > > > > <sun_spot_mom@> wrote:
                        > > > > > > > > >
                        > > > > > > > > > Please help.
                        > > > > > > > > >
                        > > > > > > > > > When I run install.exe I am getting:
                        > > > > > > > > > error
                        > > > > > > > > > Runtime error 217 at 00021AEE
                        > > > > > > > > >
                        > > > > > > > > > Then:
                        > > > > > > > > > WUHU setup
                        > > > > > > > > > An error occurred during the move data process: -
                        119
                        > > > > > > > > >
                        > > > > > > > > > Component: DLLs
                        > > > > > > > > > File group: program DLLs
                        > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                        > > > > > > > > >
                        > > > > > > > > > I have tried both versions of the download files:
                        > the
                        > > > 212
                        > > > > &
                        > > > > > 214
                        > > > > > > > > > versions and I get the same messages.
                        > > > > > > > > >
                        > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                        > > > > > wunderground.
                        > > > > > > > > >
                        > > > > > > > > > I have IE7, is that a problem?
                        > > > > > > > > >
                        > > > > > > > > > Thanks in advance.
                        > > > > > > > > > Kathy
                        > > > > > > > > >
                        > > > > > > > >
                        > > > > > > >
                        > > > > > >
                        > > > > >
                        > > > >
                        > > >
                        > >
                        >
                      • sun_spot_mom
                        I am KILSAINT2. Thanks for checking. I guess I am supposed to be able to look it up by zipcode, right? Thanks Kathy ... see ... email ... it. ... your ...
                        Message 11 of 26 , Jan 3, 2007
                          I am KILSAINT2.

                          Thanks for checking. I guess I am supposed to be able to look it up
                          by zipcode, right?

                          Thanks
                          Kathy

                          --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                          <wuhu_software@...> wrote:
                          >
                          >
                          > Kathy,
                          >
                          > What is your WU Station ID?
                          >
                          > Tried looking it up by zipcode, did not see yours in there.
                          >
                          > There was another WUHU station but it has been uploading for some
                          > time.
                          >
                          >
                          > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > <sun_spot_mom@> wrote:
                          > >
                          > > Yes, I logged in and saw my data. Do I have to wait a day to
                          see
                          > it
                          > > when I type in my zipcode?
                          > >
                          > > Thanks much.
                          > > :>)
                          > > Kathy
                          > >
                          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > <wuhu_software@> wrote:
                          > > >
                          > > >
                          > > > Kathy,
                          > > >
                          > > > Sounds like you are almost there...
                          > > >
                          > > > Go to the Weather Underground site and log in with your WU
                          email
                          > > and
                          > > > password.
                          > > >
                          > > > Once you are logged in, there is a "My Stations" link. Click
                          it.
                          > > >
                          > > > On the next page you will see something like:
                          > > >
                          > > > Current Stations
                          > > > ID: KMI????? | data
                          > > >
                          > > > Your station id follows ID:
                          > > >
                          > > > The password entered in to WUHU is the same as you use for
                          your
                          > > > normal WU account. It *is* case sensitive.
                          > > >
                          > > >
                          > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > <sun_spot_mom@> wrote:
                          > > > >
                          > > > > I do believe that it will work now (except for a minor
                          problem,
                          > I
                          > > > > don't think I know my ID, duh). Where do I locate my PWS ID?
                          > I've
                          > > > > been looking at the member settings and do not see it. I
                          think
                          > > its
                          > > > > KIL something... I was using my "handle" for the ID.
                          > > > >
                          > > > > My gauges are showing activity. I just need to see it
                          upload.
                          > > > > The problem was during the install of wuhu I chose to
                          install
                          > in
                          > > > > d:\ . Since it asked I thought it would be okay to put it
                          > > there.
                          > > > >
                          > > > > Check out the weather for 60964 coming soon!
                          > > > >
                          > > > > Thanks again.
                          > > > > Kathy
                          > > > >
                          > > > >
                          > > > >
                          > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > > > <wuhu_software@> wrote:
                          > > > > >
                          > > > > > Kathy,
                          > > > > >
                          > > > > > I am not sure which console you have but the next few
                          > > paragraphs
                          > > > > > assume you are using a WS-23XX type station.
                          > > > > >
                          > > > > > There are a couple of methods you can use to have WUHU
                          > > intercept
                          > > > > data
                          > > > > > from the console.
                          > > > > >
                          > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                          (newer
                          > > > than
                          > > > > > the version that ships on CD), you run WUHU, it monitors a
                          > file
                          > > > > > called currdat.lst (stored in C:\Heavyweather).
                          Heavweather
                          > and
                          > > > > WUHU
                          > > > > > must be run at all times otherwise WUHU will not receive
                          the
                          > > > > > currdat.lst file updates. That method is fine if you
                          insist
                          > on
                          > > > > > running Heavyweather. Personally, I think Heavyweather is
                          a
                          > CPU
                          > > > hog
                          > > > > > (can easily chew up 20-30% of your processor even when
                          idle)
                          > so
                          > > I
                          > > > > do
                          > > > > > not run it.
                          > > > > >
                          > > > > > If you run wired mode (wire between the console and the
                          > remote
                          > > > > thermo
                          > > > > > unit), your weather data can be updated every 10 seconds
                          or
                          > so.
                          > > > In
                          > > > > > this case, you would probably want to run WUHU in direct
                          > serial
                          > > > > > communications mode. If you are running wireless mode (no
                          > wire
                          > > > > > between the console and remote thermo unit), your weather
                          > data
                          > > > will
                          > > > > > only be updated once per minute regardless of the software
                          > > > > > combination you choose.
                          > > > > >
                          > > > > > When you run WUHU in direct serial mode, you must
                          terminate
                          > the
                          > > > > > Heavyweather application. When you choose this method, you
                          > must
                          > > > hit
                          > > > > > Stop on WUHU so you can make changes to the settings. In
                          the
                          > > > > general
                          > > > > > settings, there is a pulldown combo box. You can
                          select "WS-
                          > > 23XX
                          > > > > > Direct Serial Access", then to the right of the combo box,
                          > > select
                          > > > > the
                          > > > > > communications port that the console is hooked up to. Once
                          > the
                          > > > > > changes are made, you hit start. WUHU will then manage the
                          > > > > > communications with the console.
                          > > > > >
                          > > > > > If you have a WS-36XX type station, WUHU does not support
                          > > direct
                          > > > > > serial communications at this time so you must run the
                          > > > Heavyweather
                          > > > > > Pro application. Like Heavyweather Beta 2.0, this
                          application
                          > > > will
                          > > > > > write to the currdat.lst file once per minute. As with the
                          > > first
                          > > > > > method, Heavyweather Pro and WUHU must be running at all
                          > times.
                          > > > > >
                          > > > > > Well, that is the long answer. I hope things are a bit
                          > clearer
                          > > > now.
                          > > > > >
                          > > > > >
                          > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > > > <sun_spot_mom@> wrote:
                          > > > > > >
                          > > > > > > Okay!! That worked...and interestingly IE7 still works,
                          > > > although
                          > > > > > it
                          > > > > > > seems slower.
                          > > > > > > So, now I have it installed, not sure if it's getting
                          the
                          > > > > readings,
                          > > > > > > tho. My gauges don't show anything. I did turn on
                          logging
                          > to
                          > > > > show
                          > > > > > > uploads and console comm. errors. I'm not seeing much in
                          > > there
                          > > > as
                          > > > > > > yet.
                          > > > > > >
                          > > > > > > Perhaps some tips here would help?
                          > > > > > >
                          > > > > > > I will look at more again maybe tomorrow. I am tired
                          after
                          > > > > > bringing
                          > > > > > > in the new year.
                          > > > > > >
                          > > > > > > Happy New Year!
                          > > > > > > Thanks for your help.
                          > > > > > > Kathy
                          > > > > > >
                          > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                          Dickie
                          > > > > Bradford
                          > > > > > > >>>>>" <dbradford@> wrote:
                          > > > > > > >
                          > > > > > > > I had this problem a few days ago with windows 2000,
                          I
                          > had
                          > > a
                          > > > > > > printer
                          > > > > > > > installed and everytime i started WUHU it said I
                          needed
                          > a
                          > > > > > printer,
                          > > > > > > what I
                          > > > > > > > did was deleted the printer, rebooted and reinstalled
                          the
                          > > > > printer
                          > > > > > > again and
                          > > > > > > > the reinstalled WUHU and it has not acted up since.
                          > > > > > > >
                          > > > > > > > Dickie
                          > > > > > > >
                          > > > > > > > -----Original Message-----
                          > > > > > > > From: wuhu_software_group@yahoogroups.com
                          > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf
                          Of
                          > > > > > > sun_spot_mom
                          > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                          > > > > > > > To: wuhu_software_group@yahoogroups.com
                          > > > > > > > Subject: [wuhu_software_group] Re: Error installing
                          wuhu
                          > > > > > > >
                          > > > > > > >
                          > > > > > > > It could all be IE7 related...
                          > > > > > > > When I said to go ahead and install IE7, I had
                          problems
                          > > > > > > connecting.
                          > > > > > > > I went through all services and stuff in startup and
                          it
                          > > > > > appeared
                          > > > > > > that
                          > > > > > > > my camera & printer services interfere with IE7, so
                          I
                          > > > stopped
                          > > > > > them
                          > > > > > > > from loading. I will try loading them and restarting
                          > and
                          > > > then
                          > > > > > try
                          > > > > > > > the install again.
                          > > > > > > >
                          > > > > > > > I also did not see version 213 anywhere. I only
                          tried
                          > 212
                          > > &
                          > > > > 214.
                          > > > > > > > Where is 213?
                          > > > > > > >
                          > > > > > > > Thanks
                          > > > > > > >
                          > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                          > > > <yahoo@>
                          > > > > > > wrote:
                          > > > > > > > >
                          > > > > > > > > I was getting the same error when WUHU would try
                          to
                          > > load
                          > > > at
                          > > > > > > Windows
                          > > > > > > > > startup. Never really got it resolved (thought I
                          did,
                          > > but
                          > > > it
                          > > > > > > > > returned). I figured it was just my machine. I do
                          > have
                          > > a
                          > > > > > printer
                          > > > > > > > > installed...I wonder if my printer wasn't loading
                          at
                          > > > > startup
                          > > > > > > prior
                          > > > > > > > > to WUHU, therefore it was not recognizing it? I
                          was
                          > > using
                          > > > > > > version
                          > > > > > > > > 214.
                          > > > > > > > >
                          > > > > > > > > I actually decided to try uninstalling 214 and
                          trying
                          > > > 213.
                          > > > > The
                          > > > > > > > > problem seemed to go away. My other problem
                          (serial
                          > > port
                          > > > > > issue
                          > > > > > > with
                          > > > > > > > > console stopping communication with computer and
                          > serial
                          > > > port
                          > > > > > > > > indicating it was in use) seemed to go away when I
                          > went
                          > > > > back
                          > > > > > to
                          > > > > > > > 213.
                          > > > > > > > > Can't say for sure though. I will say it has been
                          > > almost
                          > > > a
                          > > > > > day
                          > > > > > > now
                          > > > > > > > > without the problems and the problems did seem to
                          > start
                          > > > > when I
                          > > > > > > > > installed V214.
                          > > > > > > > >
                          > > > > > > > >
                          > > > > > > > >
                          > > > > > > > > --- In
                          > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                          > > > > > > > > <wuhu_software@> wrote:
                          > > > > > > > > >
                          > > > > > > > > >
                          > > > > > > > > > You must have a printer defined on the machine
                          to
                          > > > install
                          > > > > > > WUHU.
                          > > > > > > > > >
                          > > > > > > > > > Go to your control panel, click printers.
                          > > > > > > > > >
                          > > > > > > > > > If you do not have one defined, add printer.
                          > > > > > > > > >
                          > > > > > > > > >
                          > > > > > > > > > --- In
                          > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                          > > > > > > > > > <sun_spot_mom@> wrote:
                          > > > > > > > > > >
                          > > > > > > > > > > Please help.
                          > > > > > > > > > >
                          > > > > > > > > > > When I run install.exe I am getting:
                          > > > > > > > > > > error
                          > > > > > > > > > > Runtime error 217 at 00021AEE
                          > > > > > > > > > >
                          > > > > > > > > > > Then:
                          > > > > > > > > > > WUHU setup
                          > > > > > > > > > > An error occurred during the move data
                          process: -
                          > 119
                          > > > > > > > > > >
                          > > > > > > > > > > Component: DLLs
                          > > > > > > > > > > File group: program DLLs
                          > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                          > > > > > > > > > >
                          > > > > > > > > > > I have tried both versions of the download
                          files:
                          > > the
                          > > > > 212
                          > > > > > &
                          > > > > > > 214
                          > > > > > > > > > > versions and I get the same messages.
                          > > > > > > > > > >
                          > > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload
                          to
                          > > > > > > wunderground.
                          > > > > > > > > > >
                          > > > > > > > > > > I have IE7, is that a problem?
                          > > > > > > > > > >
                          > > > > > > > > > > Thanks in advance.
                          > > > > > > > > > > Kathy
                          > > > > > > > > > >
                          > > > > > > > > >
                          > > > > > > > >
                          > > > > > > >
                          > > > > > >
                          > > > > >
                          > > > >
                          > > >
                          > >
                          >
                        • wuhu_software
                          Kathy, I can see your data but you are right, it is not coming up when zip code is listed. I would check under the My Stations link at the Weather
                          Message 12 of 26 , Jan 3, 2007
                            Kathy,

                            I can see your data but you are right, it is not coming up when zip
                            code is listed.

                            I would check under the 'My Stations' link at the Weather Underground
                            page and verify that your zip code, city and state are entered
                            correctly there.

                            If everything is entered correctly and the it does not show up by
                            tomorrow, we will need to contact Weather Underground to resolve it.


                            --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            <sun_spot_mom@...> wrote:
                            >
                            > I am KILSAINT2.
                            >
                            > Thanks for checking. I guess I am supposed to be able to look it
                            up
                            > by zipcode, right?
                            >
                            > Thanks
                            > Kathy
                            >
                            > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > <wuhu_software@> wrote:
                            > >
                            > >
                            > > Kathy,
                            > >
                            > > What is your WU Station ID?
                            > >
                            > > Tried looking it up by zipcode, did not see yours in there.
                            > >
                            > > There was another WUHU station but it has been uploading for some
                            > > time.
                            > >
                            > >
                            > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > <sun_spot_mom@> wrote:
                            > > >
                            > > > Yes, I logged in and saw my data. Do I have to wait a day to
                            > see
                            > > it
                            > > > when I type in my zipcode?
                            > > >
                            > > > Thanks much.
                            > > > :>)
                            > > > Kathy
                            > > >
                            > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > <wuhu_software@> wrote:
                            > > > >
                            > > > >
                            > > > > Kathy,
                            > > > >
                            > > > > Sounds like you are almost there...
                            > > > >
                            > > > > Go to the Weather Underground site and log in with your WU
                            > email
                            > > > and
                            > > > > password.
                            > > > >
                            > > > > Once you are logged in, there is a "My Stations" link. Click
                            > it.
                            > > > >
                            > > > > On the next page you will see something like:
                            > > > >
                            > > > > Current Stations
                            > > > > ID: KMI????? | data
                            > > > >
                            > > > > Your station id follows ID:
                            > > > >
                            > > > > The password entered in to WUHU is the same as you use for
                            > your
                            > > > > normal WU account. It *is* case sensitive.
                            > > > >
                            > > > >
                            > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > <sun_spot_mom@> wrote:
                            > > > > >
                            > > > > > I do believe that it will work now (except for a minor
                            > problem,
                            > > I
                            > > > > > don't think I know my ID, duh). Where do I locate my PWS
                            ID?
                            > > I've
                            > > > > > been looking at the member settings and do not see it. I
                            > think
                            > > > its
                            > > > > > KIL something... I was using my "handle" for the ID.
                            > > > > >
                            > > > > > My gauges are showing activity. I just need to see it
                            > upload.
                            > > > > > The problem was during the install of wuhu I chose to
                            > install
                            > > in
                            > > > > > d:\ . Since it asked I thought it would be okay to put it
                            > > > there.
                            > > > > >
                            > > > > > Check out the weather for 60964 coming soon!
                            > > > > >
                            > > > > > Thanks again.
                            > > > > > Kathy
                            > > > > >
                            > > > > >
                            > > > > >
                            > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > > > <wuhu_software@> wrote:
                            > > > > > >
                            > > > > > > Kathy,
                            > > > > > >
                            > > > > > > I am not sure which console you have but the next few
                            > > > paragraphs
                            > > > > > > assume you are using a WS-23XX type station.
                            > > > > > >
                            > > > > > > There are a couple of methods you can use to have WUHU
                            > > > intercept
                            > > > > > data
                            > > > > > > from the console.
                            > > > > > >
                            > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                            > (newer
                            > > > > than
                            > > > > > > the version that ships on CD), you run WUHU, it monitors
                            a
                            > > file
                            > > > > > > called currdat.lst (stored in C:\Heavyweather).
                            > Heavweather
                            > > and
                            > > > > > WUHU
                            > > > > > > must be run at all times otherwise WUHU will not receive
                            > the
                            > > > > > > currdat.lst file updates. That method is fine if you
                            > insist
                            > > on
                            > > > > > > running Heavyweather. Personally, I think Heavyweather is
                            > a
                            > > CPU
                            > > > > hog
                            > > > > > > (can easily chew up 20-30% of your processor even when
                            > idle)
                            > > so
                            > > > I
                            > > > > > do
                            > > > > > > not run it.
                            > > > > > >
                            > > > > > > If you run wired mode (wire between the console and the
                            > > remote
                            > > > > > thermo
                            > > > > > > unit), your weather data can be updated every 10 seconds
                            > or
                            > > so.
                            > > > > In
                            > > > > > > this case, you would probably want to run WUHU in direct
                            > > serial
                            > > > > > > communications mode. If you are running wireless mode (no
                            > > wire
                            > > > > > > between the console and remote thermo unit), your weather
                            > > data
                            > > > > will
                            > > > > > > only be updated once per minute regardless of the
                            software
                            > > > > > > combination you choose.
                            > > > > > >
                            > > > > > > When you run WUHU in direct serial mode, you must
                            > terminate
                            > > the
                            > > > > > > Heavyweather application. When you choose this method,
                            you
                            > > must
                            > > > > hit
                            > > > > > > Stop on WUHU so you can make changes to the settings. In
                            > the
                            > > > > > general
                            > > > > > > settings, there is a pulldown combo box. You can
                            > select "WS-
                            > > > 23XX
                            > > > > > > Direct Serial Access", then to the right of the combo
                            box,
                            > > > select
                            > > > > > the
                            > > > > > > communications port that the console is hooked up to.
                            Once
                            > > the
                            > > > > > > changes are made, you hit start. WUHU will then manage
                            the
                            > > > > > > communications with the console.
                            > > > > > >
                            > > > > > > If you have a WS-36XX type station, WUHU does not support
                            > > > direct
                            > > > > > > serial communications at this time so you must run the
                            > > > > Heavyweather
                            > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                            > application
                            > > > > will
                            > > > > > > write to the currdat.lst file once per minute. As with
                            the
                            > > > first
                            > > > > > > method, Heavyweather Pro and WUHU must be running at all
                            > > times.
                            > > > > > >
                            > > > > > > Well, that is the long answer. I hope things are a bit
                            > > clearer
                            > > > > now.
                            > > > > > >
                            > > > > > >
                            > > > > > > --- In
                            wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > > > <sun_spot_mom@> wrote:
                            > > > > > > >
                            > > > > > > > Okay!! That worked...and interestingly IE7 still
                            works,
                            > > > > although
                            > > > > > > it
                            > > > > > > > seems slower.
                            > > > > > > > So, now I have it installed, not sure if it's getting
                            > the
                            > > > > > readings,
                            > > > > > > > tho. My gauges don't show anything. I did turn on
                            > logging
                            > > to
                            > > > > > show
                            > > > > > > > uploads and console comm. errors. I'm not seeing much
                            in
                            > > > there
                            > > > > as
                            > > > > > > > yet.
                            > > > > > > >
                            > > > > > > > Perhaps some tips here would help?
                            > > > > > > >
                            > > > > > > > I will look at more again maybe tomorrow. I am tired
                            > after
                            > > > > > > bringing
                            > > > > > > > in the new year.
                            > > > > > > >
                            > > > > > > > Happy New Year!
                            > > > > > > > Thanks for your help.
                            > > > > > > > Kathy
                            > > > > > > >
                            > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                            > Dickie
                            > > > > > Bradford
                            > > > > > > > >>>>>" <dbradford@> wrote:
                            > > > > > > > >
                            > > > > > > > > I had this problem a few days ago with windows 2000,
                            > I
                            > > had
                            > > > a
                            > > > > > > > printer
                            > > > > > > > > installed and everytime i started WUHU it said I
                            > needed
                            > > a
                            > > > > > > printer,
                            > > > > > > > what I
                            > > > > > > > > did was deleted the printer, rebooted and reinstalled
                            > the
                            > > > > > printer
                            > > > > > > > again and
                            > > > > > > > > the reinstalled WUHU and it has not acted up since.
                            > > > > > > > >
                            > > > > > > > > Dickie
                            > > > > > > > >
                            > > > > > > > > -----Original Message-----
                            > > > > > > > > From: wuhu_software_group@yahoogroups.com
                            > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf
                            > Of
                            > > > > > > > sun_spot_mom
                            > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                            > > > > > > > > To: wuhu_software_group@yahoogroups.com
                            > > > > > > > > Subject: [wuhu_software_group] Re: Error installing
                            > wuhu
                            > > > > > > > >
                            > > > > > > > >
                            > > > > > > > > It could all be IE7 related...
                            > > > > > > > > When I said to go ahead and install IE7, I had
                            > problems
                            > > > > > > > connecting.
                            > > > > > > > > I went through all services and stuff in startup
                            and
                            > it
                            > > > > > > appeared
                            > > > > > > > that
                            > > > > > > > > my camera & printer services interfere with IE7, so
                            > I
                            > > > > stopped
                            > > > > > > them
                            > > > > > > > > from loading. I will try loading them and
                            restarting
                            > > and
                            > > > > then
                            > > > > > > try
                            > > > > > > > > the install again.
                            > > > > > > > >
                            > > > > > > > > I also did not see version 213 anywhere. I only
                            > tried
                            > > 212
                            > > > &
                            > > > > > 214.
                            > > > > > > > > Where is 213?
                            > > > > > > > >
                            > > > > > > > > Thanks
                            > > > > > > > >
                            > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                            > > > > <yahoo@>
                            > > > > > > > wrote:
                            > > > > > > > > >
                            > > > > > > > > > I was getting the same error when WUHU would try
                            > to
                            > > > load
                            > > > > at
                            > > > > > > > Windows
                            > > > > > > > > > startup. Never really got it resolved (thought I
                            > did,
                            > > > but
                            > > > > it
                            > > > > > > > > > returned). I figured it was just my machine. I do
                            > > have
                            > > > a
                            > > > > > > printer
                            > > > > > > > > > installed...I wonder if my printer wasn't loading
                            > at
                            > > > > > startup
                            > > > > > > > prior
                            > > > > > > > > > to WUHU, therefore it was not recognizing it? I
                            > was
                            > > > using
                            > > > > > > > version
                            > > > > > > > > > 214.
                            > > > > > > > > >
                            > > > > > > > > > I actually decided to try uninstalling 214 and
                            > trying
                            > > > > 213.
                            > > > > > The
                            > > > > > > > > > problem seemed to go away. My other problem
                            > (serial
                            > > > port
                            > > > > > > issue
                            > > > > > > > with
                            > > > > > > > > > console stopping communication with computer and
                            > > serial
                            > > > > port
                            > > > > > > > > > indicating it was in use) seemed to go away when
                            I
                            > > went
                            > > > > > back
                            > > > > > > to
                            > > > > > > > > 213.
                            > > > > > > > > > Can't say for sure though. I will say it has been
                            > > > almost
                            > > > > a
                            > > > > > > day
                            > > > > > > > now
                            > > > > > > > > > without the problems and the problems did seem to
                            > > start
                            > > > > > when I
                            > > > > > > > > > installed V214.
                            > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > > > --- In
                            > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > > > > > > > <wuhu_software@> wrote:
                            > > > > > > > > > >
                            > > > > > > > > > >
                            > > > > > > > > > > You must have a printer defined on the machine
                            > to
                            > > > > install
                            > > > > > > > WUHU.
                            > > > > > > > > > >
                            > > > > > > > > > > Go to your control panel, click printers.
                            > > > > > > > > > >
                            > > > > > > > > > > If you do not have one defined, add printer.
                            > > > > > > > > > >
                            > > > > > > > > > >
                            > > > > > > > > > > --- In
                            > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > > > > > > > <sun_spot_mom@> wrote:
                            > > > > > > > > > > >
                            > > > > > > > > > > > Please help.
                            > > > > > > > > > > >
                            > > > > > > > > > > > When I run install.exe I am getting:
                            > > > > > > > > > > > error
                            > > > > > > > > > > > Runtime error 217 at 00021AEE
                            > > > > > > > > > > >
                            > > > > > > > > > > > Then:
                            > > > > > > > > > > > WUHU setup
                            > > > > > > > > > > > An error occurred during the move data
                            > process: -
                            > > 119
                            > > > > > > > > > > >
                            > > > > > > > > > > > Component: DLLs
                            > > > > > > > > > > > File group: program DLLs
                            > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                            > > > > > > > > > > >
                            > > > > > > > > > > > I have tried both versions of the download
                            > files:
                            > > > the
                            > > > > > 212
                            > > > > > > &
                            > > > > > > > 214
                            > > > > > > > > > > > versions and I get the same messages.
                            > > > > > > > > > > >
                            > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload
                            > to
                            > > > > > > > wunderground.
                            > > > > > > > > > > >
                            > > > > > > > > > > > I have IE7, is that a problem?
                            > > > > > > > > > > >
                            > > > > > > > > > > > Thanks in advance.
                            > > > > > > > > > > > Kathy
                            > > > > > > > > > > >
                            > > > > > > > > > >
                            > > > > > > > > >
                            > > > > > > > >
                            > > > > > > >
                            > > > > > >
                            > > > > >
                            > > > >
                            > > >
                            > >
                            >
                          • sun_spot_mom
                            Okay, I checked and I changed Saint to St. (maybe it likes that better?) How long should it take to show up? Thanks Kathy ... zip ... Underground ... it. ...
                            Message 13 of 26 , Jan 3, 2007
                              Okay, I checked and I changed Saint to St. (maybe it likes that
                              better?) How long should it take to show up?

                              Thanks
                              Kathy

                              --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              <wuhu_software@...> wrote:
                              >
                              > Kathy,
                              >
                              > I can see your data but you are right, it is not coming up when
                              zip
                              > code is listed.
                              >
                              > I would check under the 'My Stations' link at the Weather
                              Underground
                              > page and verify that your zip code, city and state are entered
                              > correctly there.
                              >
                              > If everything is entered correctly and the it does not show up by
                              > tomorrow, we will need to contact Weather Underground to resolve
                              it.
                              >
                              >
                              > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > <sun_spot_mom@> wrote:
                              > >
                              > > I am KILSAINT2.
                              > >
                              > > Thanks for checking. I guess I am supposed to be able to look
                              it
                              > up
                              > > by zipcode, right?
                              > >
                              > > Thanks
                              > > Kathy
                              > >
                              > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > <wuhu_software@> wrote:
                              > > >
                              > > >
                              > > > Kathy,
                              > > >
                              > > > What is your WU Station ID?
                              > > >
                              > > > Tried looking it up by zipcode, did not see yours in there.
                              > > >
                              > > > There was another WUHU station but it has been uploading for
                              some
                              > > > time.
                              > > >
                              > > >
                              > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > <sun_spot_mom@> wrote:
                              > > > >
                              > > > > Yes, I logged in and saw my data. Do I have to wait a day
                              to
                              > > see
                              > > > it
                              > > > > when I type in my zipcode?
                              > > > >
                              > > > > Thanks much.
                              > > > > :>)
                              > > > > Kathy
                              > > > >
                              > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > > <wuhu_software@> wrote:
                              > > > > >
                              > > > > >
                              > > > > > Kathy,
                              > > > > >
                              > > > > > Sounds like you are almost there...
                              > > > > >
                              > > > > > Go to the Weather Underground site and log in with your WU
                              > > email
                              > > > > and
                              > > > > > password.
                              > > > > >
                              > > > > > Once you are logged in, there is a "My Stations" link.
                              Click
                              > > it.
                              > > > > >
                              > > > > > On the next page you will see something like:
                              > > > > >
                              > > > > > Current Stations
                              > > > > > ID: KMI????? | data
                              > > > > >
                              > > > > > Your station id follows ID:
                              > > > > >
                              > > > > > The password entered in to WUHU is the same as you use for
                              > > your
                              > > > > > normal WU account. It *is* case sensitive.
                              > > > > >
                              > > > > >
                              > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > > > <sun_spot_mom@> wrote:
                              > > > > > >
                              > > > > > > I do believe that it will work now (except for a minor
                              > > problem,
                              > > > I
                              > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                              > ID?
                              > > > I've
                              > > > > > > been looking at the member settings and do not see it.
                              I
                              > > think
                              > > > > its
                              > > > > > > KIL something... I was using my "handle" for the ID.
                              > > > > > >
                              > > > > > > My gauges are showing activity. I just need to see it
                              > > upload.
                              > > > > > > The problem was during the install of wuhu I chose to
                              > > install
                              > > > in
                              > > > > > > d:\ . Since it asked I thought it would be okay to put
                              it
                              > > > > there.
                              > > > > > >
                              > > > > > > Check out the weather for 60964 coming soon!
                              > > > > > >
                              > > > > > > Thanks again.
                              > > > > > > Kathy
                              > > > > > >
                              > > > > > >
                              > > > > > >
                              > > > > > > --- In
                              wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > > > > <wuhu_software@> wrote:
                              > > > > > > >
                              > > > > > > > Kathy,
                              > > > > > > >
                              > > > > > > > I am not sure which console you have but the next few
                              > > > > paragraphs
                              > > > > > > > assume you are using a WS-23XX type station.
                              > > > > > > >
                              > > > > > > > There are a couple of methods you can use to have WUHU
                              > > > > intercept
                              > > > > > > data
                              > > > > > > > from the console.
                              > > > > > > >
                              > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                              > > (newer
                              > > > > > than
                              > > > > > > > the version that ships on CD), you run WUHU, it
                              monitors
                              > a
                              > > > file
                              > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                              > > Heavweather
                              > > > and
                              > > > > > > WUHU
                              > > > > > > > must be run at all times otherwise WUHU will not
                              receive
                              > > the
                              > > > > > > > currdat.lst file updates. That method is fine if you
                              > > insist
                              > > > on
                              > > > > > > > running Heavyweather. Personally, I think Heavyweather
                              is
                              > > a
                              > > > CPU
                              > > > > > hog
                              > > > > > > > (can easily chew up 20-30% of your processor even when
                              > > idle)
                              > > > so
                              > > > > I
                              > > > > > > do
                              > > > > > > > not run it.
                              > > > > > > >
                              > > > > > > > If you run wired mode (wire between the console and
                              the
                              > > > remote
                              > > > > > > thermo
                              > > > > > > > unit), your weather data can be updated every 10
                              seconds
                              > > or
                              > > > so.
                              > > > > > In
                              > > > > > > > this case, you would probably want to run WUHU in
                              direct
                              > > > serial
                              > > > > > > > communications mode. If you are running wireless mode
                              (no
                              > > > wire
                              > > > > > > > between the console and remote thermo unit), your
                              weather
                              > > > data
                              > > > > > will
                              > > > > > > > only be updated once per minute regardless of the
                              > software
                              > > > > > > > combination you choose.
                              > > > > > > >
                              > > > > > > > When you run WUHU in direct serial mode, you must
                              > > terminate
                              > > > the
                              > > > > > > > Heavyweather application. When you choose this method,
                              > you
                              > > > must
                              > > > > > hit
                              > > > > > > > Stop on WUHU so you can make changes to the settings.
                              In
                              > > the
                              > > > > > > general
                              > > > > > > > settings, there is a pulldown combo box. You can
                              > > select "WS-
                              > > > > 23XX
                              > > > > > > > Direct Serial Access", then to the right of the combo
                              > box,
                              > > > > select
                              > > > > > > the
                              > > > > > > > communications port that the console is hooked up to.
                              > Once
                              > > > the
                              > > > > > > > changes are made, you hit start. WUHU will then manage
                              > the
                              > > > > > > > communications with the console.
                              > > > > > > >
                              > > > > > > > If you have a WS-36XX type station, WUHU does not
                              support
                              > > > > direct
                              > > > > > > > serial communications at this time so you must run the
                              > > > > > Heavyweather
                              > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                              > > application
                              > > > > > will
                              > > > > > > > write to the currdat.lst file once per minute. As with
                              > the
                              > > > > first
                              > > > > > > > method, Heavyweather Pro and WUHU must be running at
                              all
                              > > > times.
                              > > > > > > >
                              > > > > > > > Well, that is the long answer. I hope things are a bit
                              > > > clearer
                              > > > > > now.
                              > > > > > > >
                              > > > > > > >
                              > > > > > > > --- In
                              > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > > > > > <sun_spot_mom@> wrote:
                              > > > > > > > >
                              > > > > > > > > Okay!! That worked...and interestingly IE7 still
                              > works,
                              > > > > > although
                              > > > > > > > it
                              > > > > > > > > seems slower.
                              > > > > > > > > So, now I have it installed, not sure if it's
                              getting
                              > > the
                              > > > > > > readings,
                              > > > > > > > > tho. My gauges don't show anything. I did turn on
                              > > logging
                              > > > to
                              > > > > > > show
                              > > > > > > > > uploads and console comm. errors. I'm not seeing
                              much
                              > in
                              > > > > there
                              > > > > > as
                              > > > > > > > > yet.
                              > > > > > > > >
                              > > > > > > > > Perhaps some tips here would help?
                              > > > > > > > >
                              > > > > > > > > I will look at more again maybe tomorrow. I am
                              tired
                              > > after
                              > > > > > > > bringing
                              > > > > > > > > in the new year.
                              > > > > > > > >
                              > > > > > > > > Happy New Year!
                              > > > > > > > > Thanks for your help.
                              > > > > > > > > Kathy
                              > > > > > > > >
                              > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                              > > Dickie
                              > > > > > > Bradford
                              > > > > > > > > >>>>>" <dbradford@> wrote:
                              > > > > > > > > >
                              > > > > > > > > > I had this problem a few days ago with windows
                              2000,
                              > > I
                              > > > had
                              > > > > a
                              > > > > > > > > printer
                              > > > > > > > > > installed and everytime i started WUHU it said I
                              > > needed
                              > > > a
                              > > > > > > > printer,
                              > > > > > > > > what I
                              > > > > > > > > > did was deleted the printer, rebooted and
                              reinstalled
                              > > the
                              > > > > > > printer
                              > > > > > > > > again and
                              > > > > > > > > > the reinstalled WUHU and it has not acted up
                              since.
                              > > > > > > > > >
                              > > > > > > > > > Dickie
                              > > > > > > > > >
                              > > > > > > > > > -----Original Message-----
                              > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                              > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                              Behalf
                              > > Of
                              > > > > > > > > sun_spot_mom
                              > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                              > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                              > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                              installing
                              > > wuhu
                              > > > > > > > > >
                              > > > > > > > > >
                              > > > > > > > > > It could all be IE7 related...
                              > > > > > > > > > When I said to go ahead and install IE7, I had
                              > > problems
                              > > > > > > > > connecting.
                              > > > > > > > > > I went through all services and stuff in startup
                              > and
                              > > it
                              > > > > > > > appeared
                              > > > > > > > > that
                              > > > > > > > > > my camera & printer services interfere with IE7,
                              so
                              > > I
                              > > > > > stopped
                              > > > > > > > them
                              > > > > > > > > > from loading. I will try loading them and
                              > restarting
                              > > > and
                              > > > > > then
                              > > > > > > > try
                              > > > > > > > > > the install again.
                              > > > > > > > > >
                              > > > > > > > > > I also did not see version 213 anywhere. I only
                              > > tried
                              > > > 212
                              > > > > &
                              > > > > > > 214.
                              > > > > > > > > > Where is 213?
                              > > > > > > > > >
                              > > > > > > > > > Thanks
                              > > > > > > > > >
                              > > > > > > > > > --- In
                              wuhu_software_group@yahoogroups.com, "Brian"
                              > > > > > <yahoo@>
                              > > > > > > > > wrote:
                              > > > > > > > > > >
                              > > > > > > > > > > I was getting the same error when WUHU would
                              try
                              > > to
                              > > > > load
                              > > > > > at
                              > > > > > > > > Windows
                              > > > > > > > > > > startup. Never really got it resolved (thought
                              I
                              > > did,
                              > > > > but
                              > > > > > it
                              > > > > > > > > > > returned). I figured it was just my machine. I
                              do
                              > > > have
                              > > > > a
                              > > > > > > > printer
                              > > > > > > > > > > installed...I wonder if my printer wasn't
                              loading
                              > > at
                              > > > > > > startup
                              > > > > > > > > prior
                              > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                              I
                              > > was
                              > > > > using
                              > > > > > > > > version
                              > > > > > > > > > > 214.
                              > > > > > > > > > >
                              > > > > > > > > > > I actually decided to try uninstalling 214 and
                              > > trying
                              > > > > > 213.
                              > > > > > > The
                              > > > > > > > > > > problem seemed to go away. My other problem
                              > > (serial
                              > > > > port
                              > > > > > > > issue
                              > > > > > > > > with
                              > > > > > > > > > > console stopping communication with computer
                              and
                              > > > serial
                              > > > > > port
                              > > > > > > > > > > indicating it was in use) seemed to go away
                              when
                              > I
                              > > > went
                              > > > > > > back
                              > > > > > > > to
                              > > > > > > > > > 213.
                              > > > > > > > > > > Can't say for sure though. I will say it has
                              been
                              > > > > almost
                              > > > > > a
                              > > > > > > > day
                              > > > > > > > > now
                              > > > > > > > > > > without the problems and the problems did seem
                              to
                              > > > start
                              > > > > > > when I
                              > > > > > > > > > > installed V214.
                              > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > > > --- In
                              > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > > > > > > > > <wuhu_software@> wrote:
                              > > > > > > > > > > >
                              > > > > > > > > > > >
                              > > > > > > > > > > > You must have a printer defined on the
                              machine
                              > > to
                              > > > > > install
                              > > > > > > > > WUHU.
                              > > > > > > > > > > >
                              > > > > > > > > > > > Go to your control panel, click printers.
                              > > > > > > > > > > >
                              > > > > > > > > > > > If you do not have one defined, add printer.
                              > > > > > > > > > > >
                              > > > > > > > > > > >
                              > > > > > > > > > > > --- In
                              > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > > > > > > > > > <sun_spot_mom@> wrote:
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > Please help.
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > When I run install.exe I am getting:
                              > > > > > > > > > > > > error
                              > > > > > > > > > > > > Runtime error 217 at 00021AEE
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > Then:
                              > > > > > > > > > > > > WUHU setup
                              > > > > > > > > > > > > An error occurred during the move data
                              > > process: -
                              > > > 119
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > Component: DLLs
                              > > > > > > > > > > > > File group: program DLLs
                              > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > I have tried both versions of the download
                              > > files:
                              > > > > the
                              > > > > > > 212
                              > > > > > > > &
                              > > > > > > > > 214
                              > > > > > > > > > > > > versions and I get the same messages.
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                              upload
                              > > to
                              > > > > > > > > wunderground.
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > I have IE7, is that a problem?
                              > > > > > > > > > > > >
                              > > > > > > > > > > > > Thanks in advance.
                              > > > > > > > > > > > > Kathy
                              > > > > > > > > > > > >
                              > > > > > > > > > > >
                              > > > > > > > > > >
                              > > > > > > > > >
                              > > > > > > > >
                              > > > > > > >
                              > > > > > >
                              > > > > >
                              > > > >
                              > > >
                              > >
                              >
                            • wuhu_software
                              Kathy, I think I have found the problem. Your latitude and longitude numbers entered in the My Stations page at WU may not be correct. The are actually
                              Message 14 of 26 , Jan 3, 2007

                                Kathy,

                                I think I have found the problem.

                                Your latitude and longitude numbers entered in the 'My Stations' page at WU may not be correct. The are actually pointing to Dearing, Kansas.

                                If I pull up the forecast page for Saint Anne, Illinois:

                                http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Saint+Anne%2C+IL#History

                                The station is not listed.

                                I can pull up the station history:

                                http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=KILSAINT2

                                When I click the 'View Full Conditions and Forecast' on the history page, I end up here:

                                http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                I believe the latitude and longitude entered for the station are not correct.

                                Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )

                                A quick way to get your latitude and longitude is to pull up:

                                http://terraserver.homeadvisor.msn.com

                                Enter your street address, city and state. When you git go you can chose either the topo or aerial map. Choose topo.

                                When the next screen is displayed, the URL at the top will look something like this:

                                http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700...

                                Get the numbers that are associated with Alon and ALat

                                So the data you would need is:

                                Lat: 42.52875700

                                Lon: -83.79587400

                                Once you have the correct numbers, copy and paste them in the 'My Stations' page back at Weather Underground.

                                ---

                                To John,

                                What is interesting to note here is that when you pull up the page:

                                http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                There are stations listed from all over the country.

                                I suspect that there is a default latitude and longitude being loaded in the 'My Stations' new user signup??

                                ---

                                --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom" <sun_spot_mom@...> wrote:
                                >
                                > Okay, I checked and I changed Saint to St. (maybe it likes that
                                > better?) How long should it take to show up?
                                >
                                > Thanks
                                > Kathy
                                >
                                > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > wuhu_software@ wrote:
                                > >
                                > > Kathy,
                                > >
                                > > I can see your data but you are right, it is not coming up when
                                > zip
                                > > code is listed.
                                > >
                                > > I would check under the 'My Stations' link at the Weather
                                > Underground
                                > > page and verify that your zip code, city and state are entered
                                > > correctly there.
                                > >
                                > > If everything is entered correctly and the it does not show up by
                                > > tomorrow, we will need to contact Weather Underground to resolve
                                > it.
                                > >
                                > >
                                > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > <sun_spot_mom@> wrote:
                                > > >
                                > > > I am KILSAINT2.
                                > > >
                                > > > Thanks for checking. I guess I am supposed to be able to look
                                > it
                                > > up
                                > > > by zipcode, right?
                                > > >
                                > > > Thanks
                                > > > Kathy
                                > > >
                                > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > <wuhu_software@> wrote:
                                > > > >
                                > > > >
                                > > > > Kathy,
                                > > > >
                                > > > > What is your WU Station ID?
                                > > > >
                                > > > > Tried looking it up by zipcode, did not see yours in there.
                                > > > >
                                > > > > There was another WUHU station but it has been uploading for
                                > some
                                > > > > time.
                                > > > >
                                > > > >
                                > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > <sun_spot_mom@> wrote:
                                > > > > >
                                > > > > > Yes, I logged in and saw my data. Do I have to wait a day
                                > to
                                > > > see
                                > > > > it
                                > > > > > when I type in my zipcode?
                                > > > > >
                                > > > > > Thanks much.
                                > > > > > :>)
                                > > > > > Kathy
                                > > > > >
                                > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > <wuhu_software@> wrote:
                                > > > > > >
                                > > > > > >
                                > > > > > > Kathy,
                                > > > > > >
                                > > > > > > Sounds like you are almost there...
                                > > > > > >
                                > > > > > > Go to the Weather Underground site and log in with your WU
                                > > > email
                                > > > > > and
                                > > > > > > password.
                                > > > > > >
                                > > > > > > Once you are logged in, there is a "My Stations" link.
                                > Click
                                > > > it.
                                > > > > > >
                                > > > > > > On the next page you will see something like:
                                > > > > > >
                                > > > > > > Current Stations
                                > > > > > > ID: KMI????? | data
                                > > > > > >
                                > > > > > > Your station id follows ID:
                                > > > > > >
                                > > > > > > The password entered in to WUHU is the same as you use for
                                > > > your
                                > > > > > > normal WU account. It *is* case sensitive.
                                > > > > > >
                                > > > > > >
                                > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > >
                                > > > > > > > I do believe that it will work now (except for a minor
                                > > > problem,
                                > > > > I
                                > > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                                > > ID?
                                > > > > I've
                                > > > > > > > been looking at the member settings and do not see it.
                                > I
                                > > > think
                                > > > > > its
                                > > > > > > > KIL something... I was using my "handle" for the ID.
                                > > > > > > >
                                > > > > > > > My gauges are showing activity. I just need to see it
                                > > > upload.
                                > > > > > > > The problem was during the install of wuhu I chose to
                                > > > install
                                > > > > in
                                > > > > > > > d:\ . Since it asked I thought it would be okay to put
                                > it
                                > > > > > there.
                                > > > > > > >
                                > > > > > > > Check out the weather for 60964 coming soon!
                                > > > > > > >
                                > > > > > > > Thanks again.
                                > > > > > > > Kathy
                                > > > > > > >
                                > > > > > > >
                                > > > > > > >
                                > > > > > > > --- In
                                > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > > > <wuhu_software@> wrote:
                                > > > > > > > >
                                > > > > > > > > Kathy,
                                > > > > > > > >
                                > > > > > > > > I am not sure which console you have but the next few
                                > > > > > paragraphs
                                > > > > > > > > assume you are using a WS-23XX type station.
                                > > > > > > > >
                                > > > > > > > > There are a couple of methods you can use to have WUHU
                                > > > > > intercept
                                > > > > > > > data
                                > > > > > > > > from the console.
                                > > > > > > > >
                                > > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                > > > (newer
                                > > > > > > than
                                > > > > > > > > the version that ships on CD), you run WUHU, it
                                > monitors
                                > > a
                                > > > > file
                                > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                > > > Heavweather
                                > > > > and
                                > > > > > > > WUHU
                                > > > > > > > > must be run at all times otherwise WUHU will not
                                > receive
                                > > > the
                                > > > > > > > > currdat.lst file updates. That method is fine if you
                                > > > insist
                                > > > > on
                                > > > > > > > > running Heavyweather. Personally, I think Heavyweather
                                > is
                                > > > a
                                > > > > CPU
                                > > > > > > hog
                                > > > > > > > > (can easily chew up 20-30% of your processor even when
                                > > > idle)
                                > > > > so
                                > > > > > I
                                > > > > > > > do
                                > > > > > > > > not run it.
                                > > > > > > > >
                                > > > > > > > > If you run wired mode (wire between the console and
                                > the
                                > > > > remote
                                > > > > > > > thermo
                                > > > > > > > > unit), your weather data can be updated every 10
                                > seconds
                                > > > or
                                > > > > so.
                                > > > > > > In
                                > > > > > > > > this case, you would probably want to run WUHU in
                                > direct
                                > > > > serial
                                > > > > > > > > communications mode. If you are running wireless mode
                                > (no
                                > > > > wire
                                > > > > > > > > between the console and remote thermo unit), your
                                > weather
                                > > > > data
                                > > > > > > will
                                > > > > > > > > only be updated once per minute regardless of the
                                > > software
                                > > > > > > > > combination you choose.
                                > > > > > > > >
                                > > > > > > > > When you run WUHU in direct serial mode, you must
                                > > > terminate
                                > > > > the
                                > > > > > > > > Heavyweather application. When you choose this method,
                                > > you
                                > > > > must
                                > > > > > > hit
                                > > > > > > > > Stop on WUHU so you can make changes to the settings.
                                > In
                                > > > the
                                > > > > > > > general
                                > > > > > > > > settings, there is a pulldown combo box. You can
                                > > > select "WS-
                                > > > > > 23XX
                                > > > > > > > > Direct Serial Access", then to the right of the combo
                                > > box,
                                > > > > > select
                                > > > > > > > the
                                > > > > > > > > communications port that the console is hooked up to.
                                > > Once
                                > > > > the
                                > > > > > > > > changes are made, you hit start. WUHU will then manage
                                > > the
                                > > > > > > > > communications with the console.
                                > > > > > > > >
                                > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                > support
                                > > > > > direct
                                > > > > > > > > serial communications at this time so you must run the
                                > > > > > > Heavyweather
                                > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                > > > application
                                > > > > > > will
                                > > > > > > > > write to the currdat.lst file once per minute. As with
                                > > the
                                > > > > > first
                                > > > > > > > > method, Heavyweather Pro and WUHU must be running at
                                > all
                                > > > > times.
                                > > > > > > > >
                                > > > > > > > > Well, that is the long answer. I hope things are a bit
                                > > > > clearer
                                > > > > > > now.
                                > > > > > > > >
                                > > > > > > > >
                                > > > > > > > > --- In
                                > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > > > >
                                > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                > > works,
                                > > > > > > although
                                > > > > > > > > it
                                > > > > > > > > > seems slower.
                                > > > > > > > > > So, now I have it installed, not sure if it's
                                > getting
                                > > > the
                                > > > > > > > readings,
                                > > > > > > > > > tho. My gauges don't show anything. I did turn on
                                > > > logging
                                > > > > to
                                > > > > > > > show
                                > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                > much
                                > > in
                                > > > > > there
                                > > > > > > as
                                > > > > > > > > > yet.
                                > > > > > > > > >
                                > > > > > > > > > Perhaps some tips here would help?
                                > > > > > > > > >
                                > > > > > > > > > I will look at more again maybe tomorrow. I am
                                > tired
                                > > > after
                                > > > > > > > > bringing
                                > > > > > > > > > in the new year.
                                > > > > > > > > >
                                > > > > > > > > > Happy New Year!
                                > > > > > > > > > Thanks for your help.
                                > > > > > > > > > Kathy
                                > > > > > > > > >
                                > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                                > > > Dickie
                                > > > > > > > Bradford
                                > > > > > > > > > >>>>>" <dbradford@> wrote:
                                > > > > > > > > > >
                                > > > > > > > > > > I had this problem a few days ago with windows
                                > 2000,
                                > > > I
                                > > > > had
                                > > > > > a
                                > > > > > > > > > printer
                                > > > > > > > > > > installed and everytime i started WUHU it said I
                                > > > needed
                                > > > > a
                                > > > > > > > > printer,
                                > > > > > > > > > what I
                                > > > > > > > > > > did was deleted the printer, rebooted and
                                > reinstalled
                                > > > the
                                > > > > > > > printer
                                > > > > > > > > > again and
                                > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                > since.
                                > > > > > > > > > >
                                > > > > > > > > > > Dickie
                                > > > > > > > > > >
                                > > > > > > > > > > -----Original Message-----
                                > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                                > Behalf
                                > > > Of
                                > > > > > > > > > sun_spot_mom
                                > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                > installing
                                > > > wuhu
                                > > > > > > > > > >
                                > > > > > > > > > >
                                > > > > > > > > > > It could all be IE7 related...
                                > > > > > > > > > > When I said to go ahead and install IE7, I had
                                > > > problems
                                > > > > > > > > > connecting.
                                > > > > > > > > > > I went through all services and stuff in startup
                                > > and
                                > > > it
                                > > > > > > > > appeared
                                > > > > > > > > > that
                                > > > > > > > > > > my camera & printer services interfere with IE7,
                                > so
                                > > > I
                                > > > > > > stopped
                                > > > > > > > > them
                                > > > > > > > > > > from loading. I will try loading them and
                                > > restarting
                                > > > > and
                                > > > > > > then
                                > > > > > > > > try
                                > > > > > > > > > > the install again.
                                > > > > > > > > > >
                                > > > > > > > > > > I also did not see version 213 anywhere. I only
                                > > > tried
                                > > > > 212
                                > > > > > &
                                > > > > > > > 214.
                                > > > > > > > > > > Where is 213?
                                > > > > > > > > > >
                                > > > > > > > > > > Thanks
                                > > > > > > > > > >
                                > > > > > > > > > > --- In
                                > wuhu_software_group@yahoogroups.com, "Brian"
                                > > > > > > <yahoo@>
                                > > > > > > > > > wrote:
                                > > > > > > > > > > >
                                > > > > > > > > > > > I was getting the same error when WUHU would
                                > try
                                > > > to
                                > > > > > load
                                > > > > > > at
                                > > > > > > > > > Windows
                                > > > > > > > > > > > startup. Never really got it resolved (thought
                                > I
                                > > > did,
                                > > > > > but
                                > > > > > > it
                                > > > > > > > > > > > returned). I figured it was just my machine. I
                                > do
                                > > > > have
                                > > > > > a
                                > > > > > > > > printer
                                > > > > > > > > > > > installed...I wonder if my printer wasn't
                                > loading
                                > > > at
                                > > > > > > > startup
                                > > > > > > > > > prior
                                > > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                                > I
                                > > > was
                                > > > > > using
                                > > > > > > > > > version
                                > > > > > > > > > > > 214.
                                > > > > > > > > > > >
                                > > > > > > > > > > > I actually decided to try uninstalling 214 and
                                > > > trying
                                > > > > > > 213.
                                > > > > > > > The
                                > > > > > > > > > > > problem seemed to go away. My other problem
                                > > > (serial
                                > > > > > port
                                > > > > > > > > issue
                                > > > > > > > > > with
                                > > > > > > > > > > > console stopping communication with computer
                                > and
                                > > > > serial
                                > > > > > > port
                                > > > > > > > > > > > indicating it was in use) seemed to go away
                                > when
                                > > I
                                > > > > went
                                > > > > > > > back
                                > > > > > > > > to
                                > > > > > > > > > > 213.
                                > > > > > > > > > > > Can't say for sure though. I will say it has
                                > been
                                > > > > > almost
                                > > > > > > a
                                > > > > > > > > day
                                > > > > > > > > > now
                                > > > > > > > > > > > without the problems and the problems did seem
                                > to
                                > > > > start
                                > > > > > > > when I
                                > > > > > > > > > > > installed V214.
                                > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > > > --- In
                                > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > > > > > > > <wuhu_software@> wrote:
                                > > > > > > > > > > > >
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > You must have a printer defined on the
                                > machine
                                > > > to
                                > > > > > > install
                                > > > > > > > > > WUHU.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > Go to your control panel, click printers.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > If you do not have one defined, add printer.
                                > > > > > > > > > > > >
                                > > > > > > > > > > > >
                                > > > > > > > > > > > > --- In
                                > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > Please help.
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > When I run install.exe I am getting:
                                > > > > > > > > > > > > > error
                                > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > Then:
                                > > > > > > > > > > > > > WUHU setup
                                > > > > > > > > > > > > > An error occurred during the move data
                                > > > process: -
                                > > > > 119
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > Component: DLLs
                                > > > > > > > > > > > > > File group: program DLLs
                                > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > I have tried both versions of the download
                                > > > files:
                                > > > > > the
                                > > > > > > > 212
                                > > > > > > > > &
                                > > > > > > > > > 214
                                > > > > > > > > > > > > > versions and I get the same messages.
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                > upload
                                > > > to
                                > > > > > > > > > wunderground.
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > I have IE7, is that a problem?
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > > > Thanks in advance.
                                > > > > > > > > > > > > > Kathy
                                > > > > > > > > > > > > >
                                > > > > > > > > > > > >
                                > > > > > > > > > > >
                                > > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > >
                                > > > > > > >
                                > > > > > >
                                > > > > >
                                > > > >
                                > > >
                                > >
                                >

                              • John Celenza
                                Hello :-) Sounds like you re on the right track. You can test which city your station is nearest to by taking the lat and lon from the Weather Station History
                                Message 15 of 26 , Jan 3, 2007
                                  Hello :-)

                                  Sounds like you're on the right track.

                                  You can test which city your station is nearest to by taking the lat and lon from the Weather Station History page and entering it into the "Fast Forecast" box with "lat,lon".  You have to use the decimal version (the one in parentheses) with no degree symbol like:

                                  37.062,-95.677

                                  When I tried this, I also got Dearing Kansas.

                                  When you change your lat/lon for the station in "My Stations", it will take until tomorrow morning for your station to appear on the correct St. Anne pages.  This is because our databases have to update.

                                  -John

                                  On 1/3/07, wuhu_software <wuhu_software@...> wrote:

                                  Kathy,

                                  I think I have found the problem.

                                  Your latitude and longitude numbers entered in the 'My Stations' page at WU may not be correct. The are actually pointing to Dearing, Kansas.

                                  If I pull up the forecast page for Saint Anne, Illinois:

                                  http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Saint+Anne%2C+IL#History

                                  The station is not listed.

                                  I can pull up the station history:

                                  http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=KILSAINT2

                                  When I click the 'View Full Conditions and Forecast' on the history page, I end up here:

                                  http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                  I believe the latitude and longitude entered for the station are not correct.

                                  Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                  Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )

                                  A quick way to get your latitude and longitude is to pull up:

                                  http://terraserver.homeadvisor.msn.com

                                  Enter your street address, city and state. When you git go you can chose either the topo or aerial map. Choose topo.

                                  When the next screen is displayed, the URL at the top will look something like this:

                                  http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon= -83.79587400&ALat=42.52875700...

                                  Get the numbers that are associated with Alon and ALat

                                  So the data you would need is:

                                  Lat: 42.52875700

                                  Lon: -83.79587400

                                  Once you have the correct numbers, copy and paste them in the 'My Stations' page back at Weather Underground.

                                  ---

                                  To John,

                                  What is interesting to note here is that when you pull up the page:

                                  http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                  There are stations listed from all over the country.

                                  I suspect that there is a default latitude and longitude being loaded in the 'My Stations' new user signup??

                                  ---

                                  --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom" <sun_spot_mom@...> wrote:
                                  >
                                  > Okay, I checked and I changed Saint to St. (maybe it likes that
                                  > better?) How long should it take to show up?
                                  >
                                  > Thanks
                                  > Kathy
                                  >
                                  > --- In wuhu_software_group@yahoogroup s.com, "wuhu_software"
                                  > wuhu_software@ wrote:
                                  > >
                                  > > Kathy,
                                  > >
                                  > > I can see your data but you are right, it is not coming up when
                                  > zip
                                  > > code is listed.
                                  > >
                                  > > I would check under the 'My Stations' link at the Weather
                                  > Underground
                                  > > page and verify that your zip code, city and state are entered
                                  > > correctly there.
                                  > >
                                  > > If everything is entered correctly and the it does not show up by
                                  > > tomorrow, we will need to contact Weather Underground to resolve
                                  > it.
                                  > >
                                  > >
                                  > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > <sun_spot_mom@> wrote:
                                  > > >
                                  > > > I am KILSAINT2.
                                  > > >
                                  > > > Thanks for checking. I guess I am supposed to be able to look
                                  > it
                                  > > up
                                  > > > by zipcode, right?
                                  > > >
                                  > > > Thanks
                                  > > > Kathy
                                  > > >
                                  > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > <wuhu_software@> wrote:
                                  > > > >
                                  > > > >
                                  > > > > Kathy,
                                  > > > >
                                  > > > > What is your WU Station ID?
                                  > > > >
                                  > > > > Tried looking it up by zipcode, did not see yours in there.
                                  > > > >
                                  > > > > There was another WUHU station but it has been uploading for
                                  > some
                                  > > > > time.
                                  > > > >
                                  > > > >
                                  > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > <sun_spot_mom@> wrote:
                                  > > > > >
                                  > > > > > Yes, I logged in and saw my data. Do I have to wait a day
                                  > to
                                  > > > see
                                  > > > > it
                                  > > > > > when I type in my zipcode?
                                  > > > > >
                                  > > > > > Thanks much.
                                  > > > > > :>)
                                  > > > > > Kathy
                                  > > > > >
                                  > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > <wuhu_software@> wrote:
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > Kathy,
                                  > > > > > >
                                  > > > > > > Sounds like you are almost there...
                                  > > > > > >
                                  > > > > > > Go to the Weather Underground site and log in with your WU
                                  > > > email
                                  > > > > > and
                                  > > > > > > password.
                                  > > > > > >
                                  > > > > > > Once you are logged in, there is a "My Stations" link.
                                  > Click
                                  > > > it.
                                  > > > > > >
                                  > > > > > > On the next page you will see something like:
                                  > > > > > >
                                  > > > > > > Current Stations
                                  > > > > > > ID: KMI????? | data
                                  > > > > > >
                                  > > > > > > Your station id follows ID:
                                  > > > > > >
                                  > > > > > > The password entered in to WUHU is the same as you use for
                                  > > > your
                                  > > > > > > normal WU account. It *is* case sensitive.
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > --- In wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                                  > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > >
                                  > > > > > > > I do believe that it will work now (except for a minor
                                  > > > problem,
                                  > > > > I
                                  > > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                                  > > ID?
                                  > > > > I've
                                  > > > > > > > been looking at the member settings and do not see it.
                                  > I
                                  > > > think
                                  > > > > > its
                                  > > > > > > > KIL something... I was using my "handle" for the ID.
                                  > > > > > > >
                                  > > > > > > > My gauges are showing activity. I just need to see it
                                  > > > upload.
                                  > > > > > > > The problem was during the install of wuhu I chose to
                                  > > > install
                                  > > > > in
                                  > > > > > > > d:\ . Since it asked I thought it would be okay to put
                                  > it
                                  > > > > > there.
                                  > > > > > > >
                                  > > > > > > > Check out the weather for 60964 coming soon!
                                  > > > > > > >
                                  > > > > > > > Thanks again.
                                  > > > > > > > Kathy
                                  > > > > > > >
                                  > > > > > > >
                                  > > > > > > >
                                  > > > > > > > --- In
                                  > wuhu_software_group@yahoogroup s.com, "wuhu_software"
                                  > > > > > > > <wuhu_software@> wrote:
                                  > > > > > > > >
                                  > > > > > > > > Kathy,
                                  > > > > > > > >
                                  > > > > > > > > I am not sure which console you have but the next few
                                  > > > > > paragraphs
                                  > > > > > > > > assume you are using a WS-23XX type station.
                                  > > > > > > > >
                                  > > > > > > > > There are a couple of methods you can use to have WUHU
                                  > > > > > intercept
                                  > > > > > > > data
                                  > > > > > > > > from the console.
                                  > > > > > > > >
                                  > > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                  > > > (newer
                                  > > > > > > than
                                  > > > > > > > > the version that ships on CD), you run WUHU, it
                                  > monitors
                                  > > a
                                  > > > > file
                                  > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                  > > > Heavweather
                                  > > > > and
                                  > > > > > > > WUHU
                                  > > > > > > > > must be run at all times otherwise WUHU will not
                                  > receive
                                  > > > the
                                  > > > > > > > > currdat.lst file updates. That method is fine if you
                                  > > > insist
                                  > > > > on
                                  > > > > > > > > running Heavyweather. Personally, I think Heavyweather
                                  > is
                                  > > > a
                                  > > > > CPU
                                  > > > > > > hog
                                  > > > > > > > > (can easily chew up 20-30% of your processor even when
                                  > > > idle)
                                  > > > > so
                                  > > > > > I
                                  > > > > > > > do
                                  > > > > > > > > not run it.
                                  > > > > > > > >
                                  > > > > > > > > If you run wired mode (wire between the console and
                                  > the
                                  > > > > remote
                                  > > > > > > > thermo
                                  > > > > > > > > unit), your weather data can be updated every 10
                                  > seconds
                                  > > > or
                                  > > > > so.
                                  > > > > > > In
                                  > > > > > > > > this case, you would probably want to run WUHU in
                                  > direct
                                  > > > > serial
                                  > > > > > > > > communications mode. If you are running wireless mode
                                  > (no
                                  > > > > wire
                                  > > > > > > > > between the console and remote thermo unit), your
                                  > weather
                                  > > > > data
                                  > > > > > > will
                                  > > > > > > > > only be updated once per minute regardless of the
                                  > > software
                                  > > > > > > > > combination you choose.
                                  > > > > > > > >
                                  > > > > > > > > When you run WUHU in direct serial mode, you must
                                  > > > terminate
                                  > > > > the
                                  > > > > > > > > Heavyweather application. When you choose this method,
                                  > > you
                                  > > > > must
                                  > > > > > > hit
                                  > > > > > > > > Stop on WUHU so you can make changes to the settings.
                                  > In
                                  > > > the
                                  > > > > > > > general
                                  > > > > > > > > settings, there is a pulldown combo box. You can
                                  > > > select "WS-
                                  > > > > > 23XX
                                  > > > > > > > > Direct Serial Access", then to the right of the combo
                                  > > box,
                                  > > > > > select
                                  > > > > > > > the
                                  > > > > > > > > communications port that the console is hooked up to.
                                  > > Once
                                  > > > > the
                                  > > > > > > > > changes are made, you hit start. WUHU will then manage
                                  > > the
                                  > > > > > > > > communications with the console.
                                  > > > > > > > >
                                  > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                  > support
                                  > > > > > direct
                                  > > > > > > > > serial communications at this time so you must run the
                                  > > > > > > Heavyweather
                                  > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                  > > > application
                                  > > > > > > will
                                  > > > > > > > > write to the currdat.lst file once per minute. As with
                                  > > the
                                  > > > > > first
                                  > > > > > > > > method, Heavyweather Pro and WUHU must be running at
                                  > all
                                  > > > > times.
                                  > > > > > > > >
                                  > > > > > > > > Well, that is the long answer. I hope things are a bit
                                  > > > > clearer
                                  > > > > > > now.
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > --- In
                                  > > wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                                  > > > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > > > >
                                  > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                  > > works,
                                  > > > > > > although
                                  > > > > > > > > it
                                  > > > > > > > > > seems slower.
                                  > > > > > > > > > So, now I have it installed, not sure if it's
                                  > getting
                                  > > > the
                                  > > > > > > > readings,
                                  > > > > > > > > > tho. My gauges don't show anything. I did turn on
                                  > > > logging
                                  > > > > to
                                  > > > > > > > show
                                  > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                  > much
                                  > > in
                                  > > > > > there
                                  > > > > > > as
                                  > > > > > > > > > yet.
                                  > > > > > > > > >
                                  > > > > > > > > > Perhaps some tips here would help?
                                  > > > > > > > > >
                                  > > > > > > > > > I will look at more again maybe tomorrow. I am
                                  > tired
                                  > > > after
                                  > > > > > > > > bringing
                                  > > > > > > > > > in the new year.
                                  > > > > > > > > >
                                  > > > > > > > > > Happy New Year!
                                  > > > > > > > > > Thanks for your help.
                                  > > > > > > > > > Kathy
                                  > > > > > > > > >
                                  > > > > > > > > > --- In wuhu_software_group@yahoogroup s.com, "<<<<<
                                  > > > Dickie
                                  > > > > > > > Bradford
                                  > > > > > > > > > >>>>>" <dbradford@> wrote:
                                  > > > > > > > > > >
                                  > > > > > > > > > > I had this problem a few days ago with windows
                                  > 2000,
                                  > > > I
                                  > > > > had
                                  > > > > > a
                                  > > > > > > > > > printer
                                  > > > > > > > > > > installed and everytime i started WUHU it said I
                                  > > > needed
                                  > > > > a
                                  > > > > > > > > printer,
                                  > > > > > > > > > what I
                                  > > > > > > > > > > did was deleted the printer, rebooted and
                                  > reinstalled
                                  > > > the
                                  > > > > > > > printer
                                  > > > > > > > > > again and
                                  > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                  > since.
                                  > > > > > > > > > >
                                  > > > > > > > > > > Dickie
                                  > > > > > > > > > >
                                  > > > > > > > > > > -----Original Message-----
                                  > > > > > > > > > > From: wuhu_software_group@yahoogroup s.com
                                  > > > > > > > > > > [mailto: wuhu_software_group@yahoogroups.com]On
                                  > Behalf
                                  > > > Of
                                  > > > > > > > > > sun_spot_mom
                                  > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                  > > > > > > > > > > To: wuhu_software_group@yahoogroup s.com
                                  > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                  > installing
                                  > > > wuhu
                                  > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > > > It could all be IE7 related...
                                  > > > > > > > > > > When I said to go ahead and install IE7, I had
                                  > > > problems
                                  > > > > > > > > > connecting.
                                  > > > > > > > > > > I went through all services and stuff in startup
                                  > > and
                                  > > > it
                                  > > > > > > > > appeared
                                  > > > > > > > > > that
                                  > > > > > > > > > > my camera & printer services interfere with IE7,
                                  > so
                                  > > > I
                                  > > > > > > stopped
                                  > > > > > > > > them
                                  > > > > > > > > > > from loading. I will try loading them and
                                  > > restarting
                                  > > > > and
                                  > > > > > > then
                                  > > > > > > > > try
                                  > > > > > > > > > > the install again.
                                  > > > > > > > > > >
                                  > > > > > > > > > > I also did not see version 213 anywhere. I only
                                  > > > tried
                                  > > > > 212
                                  > > > > > &
                                  > > > > > > > 214.
                                  > > > > > > > > > > Where is 213?
                                  > > > > > > > > > >
                                  > > > > > > > > > > Thanks
                                  > > > > > > > > > >
                                  > > > > > > > > > > --- In
                                  > wuhu_software_group@yahoogroup s.com, "Brian"
                                  > > > > > > <yahoo@>
                                  > > > > > > > > > wrote:
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > I was getting the same error when WUHU would
                                  > try
                                  > > > to
                                  > > > > > load
                                  > > > > > > at
                                  > > > > > > > > > Windows
                                  > > > > > > > > > > > startup. Never really got it resolved (thought
                                  > I
                                  > > > did,
                                  > > > > > but
                                  > > > > > > it
                                  > > > > > > > > > > > returned). I figured it was just my machine. I
                                  > do
                                  > > > > have
                                  > > > > > a
                                  > > > > > > > > printer
                                  > > > > > > > > > > > installed...I wonder if my printer wasn't
                                  > loading
                                  > > > at
                                  > > > > > > > startup
                                  > > > > > > > > > prior
                                  > > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                                  > I
                                  > > > was
                                  > > > > > using
                                  > > > > > > > > > version
                                  > > > > > > > > > > > 214.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > I actually decided to try uninstalling 214 and
                                  > > > trying
                                  > > > > > > 213.
                                  > > > > > > > The
                                  > > > > > > > > > > > problem seemed to go away. My other problem
                                  > > > (serial
                                  > > > > > port
                                  > > > > > > > > issue
                                  > > > > > > > > > with
                                  > > > > > > > > > > > console stopping communication with computer
                                  > and
                                  > > > > serial
                                  > > > > > > port
                                  > > > > > > > > > > > indicating it was in use) seemed to go away
                                  > when
                                  > > I
                                  > > > > went
                                  > > > > > > > back
                                  > > > > > > > > to
                                  > > > > > > > > > > 213.
                                  > > > > > > > > > > > Can't say for sure though. I will say it has
                                  > been
                                  > > > > > almost
                                  > > > > > > a
                                  > > > > > > > > day
                                  > > > > > > > > > now
                                  > > > > > > > > > > > without the problems and the problems did seem
                                  > to
                                  > > > > start
                                  > > > > > > > when I
                                  > > > > > > > > > > > installed V214.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > >
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > --- In
                                  > > > > > > wuhu_software_group@yahoogroup s.com, "wuhu_software"
                                  > > > > > > > > > > > <wuhu_software@> wrote:
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > You must have a printer defined on the
                                  > machine
                                  > > > to
                                  > > > > > > install
                                  > > > > > > > > > WUHU.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > Go to your control panel, click printers.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > If you do not have one defined, add printer.
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > > > --- In
                                  > > > > > > wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                                  > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Please help.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > When I run install.exe I am getting:
                                  > > > > > > > > > > > > > error
                                  > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Then:
                                  > > > > > > > > > > > > > WUHU setup
                                  > > > > > > > > > > > > > An error occurred during the move data
                                  > > > process: -
                                  > > > > 119
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Component: DLLs
                                  > > > > > > > > > > > > > File group: program DLLs
                                  > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > I have tried both versions of the download
                                  > > > files:
                                  > > > > > the
                                  > > > > > > > 212
                                  > > > > > > > > &
                                  > > > > > > > > > 214
                                  > > > > > > > > > > > > > versions and I get the same messages.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                  > upload
                                  > > > to
                                  > > > > > > > > > wunderground.
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > I have IE7, is that a problem?
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > > > Thanks in advance.
                                  > > > > > > > > > > > > > Kathy
                                  > > > > > > > > > > > > >
                                  > > > > > > > > > > > >
                                  > > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > >
                                  > > > > > >
                                  > > > > >
                                  > > > >
                                  > > >
                                  > >
                                  >




                                  --
                                  ============================================================
                                  John Celenza
                                  Director of Weather Technology
                                  Phone (415) 543-5022 x105
                                  FAX   (415) 543-5044
                                  john@...
                                  ============================================================
                                • wuhu_software
                                  John, Did you happen to notice the other stations with that same Latitude/Longitude? Do you have a default loaded when a user creates a station? You might want
                                  Message 16 of 26 , Jan 3, 2007
                                    John,

                                    Did you happen to notice the other stations with that same
                                    Latitude/Longitude?

                                    Do you have a default loaded when a user creates a station?

                                    You might want to see how many are registered with that location.

                                    I am sure the owners would like to know they are pointing off to
                                    Dearing Kansas.

                                    Thanks.


                                    --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                    <john.celenza@...> wrote:
                                    >
                                    > Hello :-)
                                    >
                                    > Sounds like you're on the right track.
                                    >
                                    > You can test which city your station is nearest to by taking the
                                    lat and lon
                                    > from the Weather Station History page and entering it into the "Fast
                                    > Forecast" box with "lat,lon". You have to use the decimal version
                                    (the one
                                    > in parentheses) with no degree symbol like:
                                    >
                                    > 37.062,-95.677
                                    >
                                    > When I tried this, I also got Dearing Kansas.
                                    >
                                    > When you change your lat/lon for the station in "My Stations", it
                                    will take
                                    > until tomorrow morning for your station to appear on the correct
                                    St. Anne
                                    > pages. This is because our databases have to update.
                                    >
                                    > -John
                                    >
                                    > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                    > >
                                    > > Kathy,
                                    > >
                                    > > I think I have found the problem.
                                    > >
                                    > > Your latitude and longitude numbers entered in the 'My Stations'
                                    page at
                                    > > WU may not be correct. The are actually pointing to Dearing,
                                    Kansas.
                                    > >
                                    > > If I pull up the forecast page for Saint Anne, Illinois:
                                    > >
                                    > >
                                    > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                    query=Saint+Anne%2C+IL#History
                                    > >
                                    > > The station is not listed.
                                    > >
                                    > > I can pull up the station history:
                                    > >
                                    > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                    ID=KILSAINT2
                                    > >
                                    > > When I click the 'View Full Conditions and Forecast' on the
                                    history page,
                                    > > I end up here:
                                    > >
                                    > >
                                    > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                    query=37.062%2C-95.677
                                    > >
                                    > > I believe the latitude and longitude entered for the station are
                                    not
                                    > > correct.
                                    > >
                                    > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                    > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                    > >
                                    > > A quick way to get your latitude and longitude is to pull up:
                                    > >
                                    > > http://terraserver.homeadvisor.msn.com
                                    > >
                                    > > Enter your street address, city and state. When you git go you
                                    can chose
                                    > > either the topo or aerial map. Choose topo.
                                    > >
                                    > > When the next screen is displayed, the URL at the top will look
                                    something
                                    > > like this:
                                    > >
                                    > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                    > > -
                                    83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.com
                                    /image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                    > > ...
                                    > >
                                    > > Get the numbers that are associated with Alon and ALat
                                    > >
                                    > > So the data you would need is:
                                    > >
                                    > > Lat: *42.52875700*
                                    > >
                                    > > Lon: *-83.79587400*
                                    > >
                                    > > Once you have the correct numbers, copy and paste them in the 'My
                                    > > Stations' page back at Weather Underground.
                                    > >
                                    > > ---
                                    > >
                                    > > To John,
                                    > >
                                    > > What is interesting to note here is that when you pull up the
                                    page:
                                    > >
                                    > >
                                    > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                    query=37.062%2C-95.677
                                    > >
                                    > > There are stations listed from all over the country.
                                    > >
                                    > > I suspect that there is a default latitude and longitude being
                                    loaded in
                                    > > the 'My Stations' new user signup??
                                    > >
                                    > > ---
                                    > >
                                    > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > <sun_spot_mom@> wrote:
                                    > > >
                                    > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                    > > > better?) How long should it take to show up?
                                    > > >
                                    > > > Thanks
                                    > > > Kathy
                                    > > >
                                    > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > wuhu_software@ wrote:
                                    > > > >
                                    > > > > Kathy,
                                    > > > >
                                    > > > > I can see your data but you are right, it is not coming up
                                    when
                                    > > > zip
                                    > > > > code is listed.
                                    > > > >
                                    > > > > I would check under the 'My Stations' link at the Weather
                                    > > > Underground
                                    > > > > page and verify that your zip code, city and state are entered
                                    > > > > correctly there.
                                    > > > >
                                    > > > > If everything is entered correctly and the it does not show
                                    up by
                                    > > > > tomorrow, we will need to contact Weather Underground to
                                    resolve
                                    > > > it.
                                    > > > >
                                    > > > >
                                    > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > <sun_spot_mom@> wrote:
                                    > > > > >
                                    > > > > > I am KILSAINT2.
                                    > > > > >
                                    > > > > > Thanks for checking. I guess I am supposed to be able to
                                    look
                                    > > > it
                                    > > > > up
                                    > > > > > by zipcode, right?
                                    > > > > >
                                    > > > > > Thanks
                                    > > > > > Kathy
                                    > > > > >
                                    > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > <wuhu_software@> wrote:
                                    > > > > > >
                                    > > > > > >
                                    > > > > > > Kathy,
                                    > > > > > >
                                    > > > > > > What is your WU Station ID?
                                    > > > > > >
                                    > > > > > > Tried looking it up by zipcode, did not see yours in
                                    there.
                                    > > > > > >
                                    > > > > > > There was another WUHU station but it has been uploading
                                    for
                                    > > > some
                                    > > > > > > time.
                                    > > > > > >
                                    > > > > > >
                                    > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > >
                                    > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                    day
                                    > > > to
                                    > > > > > see
                                    > > > > > > it
                                    > > > > > > > when I type in my zipcode?
                                    > > > > > > >
                                    > > > > > > > Thanks much.
                                    > > > > > > > :>)
                                    > > > > > > > Kathy
                                    > > > > > > >
                                    > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > > > Kathy,
                                    > > > > > > > >
                                    > > > > > > > > Sounds like you are almost there...
                                    > > > > > > > >
                                    > > > > > > > > Go to the Weather Underground site and log in with
                                    your WU
                                    > > > > > email
                                    > > > > > > > and
                                    > > > > > > > > password.
                                    > > > > > > > >
                                    > > > > > > > > Once you are logged in, there is a "My Stations" link.
                                    > > > Click
                                    > > > > > it.
                                    > > > > > > > >
                                    > > > > > > > > On the next page you will see something like:
                                    > > > > > > > >
                                    > > > > > > > > Current Stations
                                    > > > > > > > > ID: KMI????? | data
                                    > > > > > > > >
                                    > > > > > > > > Your station id follows ID:
                                    > > > > > > > >
                                    > > > > > > > > The password entered in to WUHU is the same as you
                                    use for
                                    > > > > > your
                                    > > > > > > > > normal WU account. It *is* case sensitive.
                                    > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > >
                                    > > > > > > > > > I do believe that it will work now (except for a
                                    minor
                                    > > > > > problem,
                                    > > > > > > I
                                    > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                    my PWS
                                    > > > > ID?
                                    > > > > > > I've
                                    > > > > > > > > > been looking at the member settings and do not see
                                    it.
                                    > > > I
                                    > > > > > think
                                    > > > > > > > its
                                    > > > > > > > > > KIL something... I was using my "handle" for the ID.
                                    > > > > > > > > >
                                    > > > > > > > > > My gauges are showing activity. I just need to see
                                    it
                                    > > > > > upload.
                                    > > > > > > > > > The problem was during the install of wuhu I chose
                                    to
                                    > > > > > install
                                    > > > > > > in
                                    > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                    put
                                    > > > it
                                    > > > > > > > there.
                                    > > > > > > > > >
                                    > > > > > > > > > Check out the weather for 60964 coming soon!
                                    > > > > > > > > >
                                    > > > > > > > > > Thanks again.
                                    > > > > > > > > > Kathy
                                    > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > > > --- In
                                    > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > > > >
                                    > > > > > > > > > > Kathy,
                                    > > > > > > > > > >
                                    > > > > > > > > > > I am not sure which console you have but the next
                                    few
                                    > > > > > > > paragraphs
                                    > > > > > > > > > > assume you are using a WS-23XX type station.
                                    > > > > > > > > > >
                                    > > > > > > > > > > There are a couple of methods you can use to have
                                    WUHU
                                    > > > > > > > intercept
                                    > > > > > > > > > data
                                    > > > > > > > > > > from the console.
                                    > > > > > > > > > >
                                    > > > > > > > > > > The first is quite easy. You run Heavyweather
                                    Beta 2.0
                                    > > > > > (newer
                                    > > > > > > > > than
                                    > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                    > > > monitors
                                    > > > > a
                                    > > > > > > file
                                    > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                    > > > > > Heavweather
                                    > > > > > > and
                                    > > > > > > > > > WUHU
                                    > > > > > > > > > > must be run at all times otherwise WUHU will not
                                    > > > receive
                                    > > > > > the
                                    > > > > > > > > > > currdat.lst file updates. That method is fine if
                                    you
                                    > > > > > insist
                                    > > > > > > on
                                    > > > > > > > > > > running Heavyweather. Personally, I think
                                    Heavyweather
                                    > > > is
                                    > > > > > a
                                    > > > > > > CPU
                                    > > > > > > > > hog
                                    > > > > > > > > > > (can easily chew up 20-30% of your processor even
                                    when
                                    > > > > > idle)
                                    > > > > > > so
                                    > > > > > > > I
                                    > > > > > > > > > do
                                    > > > > > > > > > > not run it.
                                    > > > > > > > > > >
                                    > > > > > > > > > > If you run wired mode (wire between the console
                                    and
                                    > > > the
                                    > > > > > > remote
                                    > > > > > > > > > thermo
                                    > > > > > > > > > > unit), your weather data can be updated every 10
                                    > > > seconds
                                    > > > > > or
                                    > > > > > > so.
                                    > > > > > > > > In
                                    > > > > > > > > > > this case, you would probably want to run WUHU in
                                    > > > direct
                                    > > > > > > serial
                                    > > > > > > > > > > communications mode. If you are running wireless
                                    mode
                                    > > > (no
                                    > > > > > > wire
                                    > > > > > > > > > > between the console and remote thermo unit), your
                                    > > > weather
                                    > > > > > > data
                                    > > > > > > > > will
                                    > > > > > > > > > > only be updated once per minute regardless of the
                                    > > > > software
                                    > > > > > > > > > > combination you choose.
                                    > > > > > > > > > >
                                    > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                    > > > > > terminate
                                    > > > > > > the
                                    > > > > > > > > > > Heavyweather application. When you choose this
                                    method,
                                    > > > > you
                                    > > > > > > must
                                    > > > > > > > > hit
                                    > > > > > > > > > > Stop on WUHU so you can make changes to the
                                    settings.
                                    > > > In
                                    > > > > > the
                                    > > > > > > > > > general
                                    > > > > > > > > > > settings, there is a pulldown combo box. You can
                                    > > > > > select "WS-
                                    > > > > > > > 23XX
                                    > > > > > > > > > > Direct Serial Access", then to the right of the
                                    combo
                                    > > > > box,
                                    > > > > > > > select
                                    > > > > > > > > > the
                                    > > > > > > > > > > communications port that the console is hooked up
                                    to.
                                    > > > > Once
                                    > > > > > > the
                                    > > > > > > > > > > changes are made, you hit start. WUHU will then
                                    manage
                                    > > > > the
                                    > > > > > > > > > > communications with the console.
                                    > > > > > > > > > >
                                    > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                    > > > support
                                    > > > > > > > direct
                                    > > > > > > > > > > serial communications at this time so you must
                                    run the
                                    > > > > > > > > Heavyweather
                                    > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                    > > > > > application
                                    > > > > > > > > will
                                    > > > > > > > > > > write to the currdat.lst file once per minute. As
                                    with
                                    > > > > the
                                    > > > > > > > first
                                    > > > > > > > > > > method, Heavyweather Pro and WUHU must be running
                                    at
                                    > > > all
                                    > > > > > > times.
                                    > > > > > > > > > >
                                    > > > > > > > > > > Well, that is the long answer. I hope things are
                                    a bit
                                    > > > > > > clearer
                                    > > > > > > > > now.
                                    > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > > > --- In
                                    > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                    > > > > works,
                                    > > > > > > > > although
                                    > > > > > > > > > > it
                                    > > > > > > > > > > > seems slower.
                                    > > > > > > > > > > > So, now I have it installed, not sure if it's
                                    > > > getting
                                    > > > > > the
                                    > > > > > > > > > readings,
                                    > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                    on
                                    > > > > > logging
                                    > > > > > > to
                                    > > > > > > > > > show
                                    > > > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                    > > > much
                                    > > > > in
                                    > > > > > > > there
                                    > > > > > > > > as
                                    > > > > > > > > > > > yet.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Perhaps some tips here would help?
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                    > > > tired
                                    > > > > > after
                                    > > > > > > > > > > bringing
                                    > > > > > > > > > > > in the new year.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Happy New Year!
                                    > > > > > > > > > > > Thanks for your help.
                                    > > > > > > > > > > > Kathy
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "<<<<<
                                    > > > > > Dickie
                                    > > > > > > > > > Bradford
                                    > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I had this problem a few days ago with windows
                                    > > > 2000,
                                    > > > > > I
                                    > > > > > > had
                                    > > > > > > > a
                                    > > > > > > > > > > > printer
                                    > > > > > > > > > > > > installed and everytime i started WUHU it
                                    said I
                                    > > > > > needed
                                    > > > > > > a
                                    > > > > > > > > > > printer,
                                    > > > > > > > > > > > what I
                                    > > > > > > > > > > > > did was deleted the printer, rebooted and
                                    > > > reinstalled
                                    > > > > > the
                                    > > > > > > > > > printer
                                    > > > > > > > > > > > again and
                                    > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                    > > > since.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Dickie
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > -----Original Message-----
                                    > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                    > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                                    > > > Behalf
                                    > > > > > Of
                                    > > > > > > > > > > > sun_spot_mom
                                    > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                    > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                    > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                    > > > installing
                                    > > > > > wuhu
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > It could all be IE7 related...
                                    > > > > > > > > > > > > When I said to go ahead and install IE7, I had
                                    > > > > > problems
                                    > > > > > > > > > > > connecting.
                                    > > > > > > > > > > > > I went through all services and stuff in
                                    startup
                                    > > > > and
                                    > > > > > it
                                    > > > > > > > > > > appeared
                                    > > > > > > > > > > > that
                                    > > > > > > > > > > > > my camera & printer services interfere with
                                    IE7,
                                    > > > so
                                    > > > > > I
                                    > > > > > > > > stopped
                                    > > > > > > > > > > them
                                    > > > > > > > > > > > > from loading. I will try loading them and
                                    > > > > restarting
                                    > > > > > > and
                                    > > > > > > > > then
                                    > > > > > > > > > > try
                                    > > > > > > > > > > > > the install again.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                    only
                                    > > > > > tried
                                    > > > > > > 212
                                    > > > > > > > &
                                    > > > > > > > > > 214.
                                    > > > > > > > > > > > > Where is 213?
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Thanks
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > --- In
                                    > > > wuhu_software_group@yahoogroups.com, "Brian"
                                    > > > > > > > > <yahoo@>
                                    > > > > > > > > > > > wrote:
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > I was getting the same error when WUHU would
                                    > > > try
                                    > > > > > to
                                    > > > > > > > load
                                    > > > > > > > > at
                                    > > > > > > > > > > > Windows
                                    > > > > > > > > > > > > > startup. Never really got it resolved
                                    (thought
                                    > > > I
                                    > > > > > did,
                                    > > > > > > > but
                                    > > > > > > > > it
                                    > > > > > > > > > > > > > returned). I figured it was just my
                                    machine. I
                                    > > > do
                                    > > > > > > have
                                    > > > > > > > a
                                    > > > > > > > > > > printer
                                    > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                    > > > loading
                                    > > > > > at
                                    > > > > > > > > > startup
                                    > > > > > > > > > > > prior
                                    > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                    it?
                                    > > > I
                                    > > > > > was
                                    > > > > > > > using
                                    > > > > > > > > > > > version
                                    > > > > > > > > > > > > > 214.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                    and
                                    > > > > > trying
                                    > > > > > > > > 213.
                                    > > > > > > > > > The
                                    > > > > > > > > > > > > > problem seemed to go away. My other problem
                                    > > > > > (serial
                                    > > > > > > > port
                                    > > > > > > > > > > issue
                                    > > > > > > > > > > > with
                                    > > > > > > > > > > > > > console stopping communication with computer
                                    > > > and
                                    > > > > > > serial
                                    > > > > > > > > port
                                    > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                    > > > when
                                    > > > > I
                                    > > > > > > went
                                    > > > > > > > > > back
                                    > > > > > > > > > > to
                                    > > > > > > > > > > > > 213.
                                    > > > > > > > > > > > > > Can't say for sure though. I will say it has
                                    > > > been
                                    > > > > > > > almost
                                    > > > > > > > > a
                                    > > > > > > > > > > day
                                    > > > > > > > > > > > now
                                    > > > > > > > > > > > > > without the problems and the problems did
                                    seem
                                    > > > to
                                    > > > > > > start
                                    > > > > > > > > > when I
                                    > > > > > > > > > > > > > installed V214.
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > --- In
                                    > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > You must have a printer defined on the
                                    > > > machine
                                    > > > > > to
                                    > > > > > > > > install
                                    > > > > > > > > > > > WUHU.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > Go to your control panel, click printers.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > If you do not have one defined, add
                                    printer.
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > --- In
                                    > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Please help.
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                    > > > > > > > > > > > > > > > error
                                    > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Then:
                                    > > > > > > > > > > > > > > > WUHU setup
                                    > > > > > > > > > > > > > > > An error occurred during the move data
                                    > > > > > process: -
                                    > > > > > > 119
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Component: DLLs
                                    > > > > > > > > > > > > > > > File group: program DLLs
                                    > > > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > I have tried both versions of the
                                    download
                                    > > > > > files:
                                    > > > > > > > the
                                    > > > > > > > > > 212
                                    > > > > > > > > > > &
                                    > > > > > > > > > > > 214
                                    > > > > > > > > > > > > > > > versions and I get the same messages.
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                    > > > upload
                                    > > > > > to
                                    > > > > > > > > > > > wunderground.
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > > > Thanks in advance.
                                    > > > > > > > > > > > > > > > Kathy
                                    > > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > > >
                                    > > > > > > > > > > > > >
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > >
                                    > > > > > >
                                    > > > > >
                                    > > > >
                                    > > >
                                    > >
                                    > >
                                    > >
                                    >
                                    >
                                    >
                                    > --
                                    > ============================================================
                                    > John Celenza
                                    > Director of Weather Technology
                                    > Phone (415) 543-5022 x105
                                    > FAX (415) 543-5044
                                    > john@...
                                    > ============================================================
                                    >
                                  • John Celenza
                                    I have seen this, and it s on a oh my list of bugs to fix. What happens is that Dearing Kansas is the center of the US. So, if an address lookup fails, we
                                    Message 17 of 26 , Jan 3, 2007
                                      I have seen this, and it's on a "oh my" list of bugs to fix.

                                      What happens is that Dearing Kansas is the center of the US. So, if an address lookup fails, we get Dearing Kansas back since the geocoder defaults to the center of the country!

                                      -John

                                      On 1/3/07, wuhu_software <wuhu_software@...> wrote:


                                      John,

                                      Did you happen to notice the other stations with that same
                                      Latitude/Longitude?

                                      Do you have a default loaded when a user creates a station?

                                      You might want to see how many are registered with that location.

                                      I am sure the owners would like to know they are pointing off to
                                      Dearing Kansas.

                                      Thanks.

                                      --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                      <john.celenza@...> wrote:
                                      >
                                      > Hello :-)
                                      >
                                      > Sounds like you're on the right track.
                                      >
                                      > You can test which city your station is nearest to by taking the
                                      lat and lon
                                      > from the Weather Station History page and entering it into the "Fast
                                      > Forecast" box with "lat,lon". You have to use the decimal version
                                      (the one
                                      > in parentheses) with no degree symbol like:
                                      >
                                      > 37.062,-95.677
                                      >
                                      > When I tried this, I also got Dearing Kansas.
                                      >
                                      > When you change your lat/lon for the station in "My Stations", it
                                      will take
                                      > until tomorrow morning for your station to appear on the correct
                                      St. Anne
                                      > pages. This is because our databases have to update.
                                      >
                                      > -John
                                      >

                                      > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                      > >
                                      > > Kathy,
                                      > >
                                      > > I think I have found the problem.
                                      > >
                                      > > Your latitude and longitude numbers entered in the 'My Stations'
                                      page at
                                      > > WU may not be correct. The are actually pointing to Dearing,
                                      Kansas.
                                      > >
                                      > > If I pull up the forecast page for Saint Anne, Illinois:
                                      > >
                                      > >
                                      > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                      query=Saint+Anne%2C+IL#History
                                      > >
                                      > > The station is not listed.
                                      > >
                                      > > I can pull up the station history:
                                      > >
                                      > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                      ID=KILSAINT2
                                      > >
                                      > > When I click the 'View Full Conditions and Forecast' on the
                                      history page,
                                      > > I end up here:
                                      > >
                                      > >
                                      > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                      query=37.062%2C-95.677
                                      > >
                                      > > I believe the latitude and longitude entered for the station are
                                      not
                                      > > correct.
                                      > >
                                      > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                      > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                      > >
                                      > > A quick way to get your latitude and longitude is to pull up:
                                      > >
                                      > > http://terraserver.homeadvisor.msn.com
                                      > >
                                      > > Enter your street address, city and state. When you git go you
                                      can chose
                                      > > either the topo or aerial map. Choose topo.
                                      > >
                                      > > When the next screen is displayed, the URL at the top will look
                                      something
                                      > > like this:
                                      > >
                                      > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                      > > -
                                      83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.com
                                      /image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                      > > ...
                                      > >
                                      > > Get the numbers that are associated with Alon and ALat
                                      > >
                                      > > So the data you would need is:
                                      > >
                                      > > Lat: *42.52875700*
                                      > >
                                      > > Lon: *-83.79587400*
                                      > >
                                      > > Once you have the correct numbers, copy and paste them in the 'My
                                      > > Stations' page back at Weather Underground.
                                      > >
                                      > > ---
                                      > >
                                      > > To John,
                                      > >
                                      > > What is interesting to note here is that when you pull up the
                                      page:
                                      > >
                                      > >
                                      > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                      query=37.062%2C-95.677
                                      > >
                                      > > There are stations listed from all over the country.
                                      > >
                                      > > I suspect that there is a default latitude and longitude being
                                      loaded in
                                      > > the 'My Stations' new user signup??
                                      > >
                                      > > ---
                                      > >
                                      > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > <sun_spot_mom@> wrote:
                                      > > >
                                      > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                      > > > better?) How long should it take to show up?
                                      > > >
                                      > > > Thanks
                                      > > > Kathy
                                      > > >
                                      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > wuhu_software@ wrote:
                                      > > > >
                                      > > > > Kathy,
                                      > > > >
                                      > > > > I can see your data but you are right, it is not coming up
                                      when
                                      > > > zip
                                      > > > > code is listed.
                                      > > > >
                                      > > > > I would check under the 'My Stations' link at the Weather
                                      > > > Underground
                                      > > > > page and verify that your zip code, city and state are entered
                                      > > > > correctly there.
                                      > > > >
                                      > > > > If everything is entered correctly and the it does not show
                                      up by
                                      > > > > tomorrow, we will need to contact Weather Underground to
                                      resolve
                                      > > > it.
                                      > > > >
                                      > > > >
                                      > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > <sun_spot_mom@> wrote:
                                      > > > > >
                                      > > > > > I am KILSAINT2.
                                      > > > > >
                                      > > > > > Thanks for checking. I guess I am supposed to be able to
                                      look
                                      > > > it
                                      > > > > up
                                      > > > > > by zipcode, right?
                                      > > > > >
                                      > > > > > Thanks
                                      > > > > > Kathy
                                      > > > > >
                                      > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > <wuhu_software@> wrote:
                                      > > > > > >
                                      > > > > > >
                                      > > > > > > Kathy,
                                      > > > > > >
                                      > > > > > > What is your WU Station ID?
                                      > > > > > >
                                      > > > > > > Tried looking it up by zipcode, did not see yours in
                                      there.
                                      > > > > > >
                                      > > > > > > There was another WUHU station but it has been uploading
                                      for
                                      > > > some
                                      > > > > > > time.
                                      > > > > > >
                                      > > > > > >
                                      > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > >
                                      > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                      day
                                      > > > to
                                      > > > > > see
                                      > > > > > > it
                                      > > > > > > > when I type in my zipcode?
                                      > > > > > > >
                                      > > > > > > > Thanks much.
                                      > > > > > > > :>)
                                      > > > > > > > Kathy
                                      > > > > > > >
                                      > > > > > > > --- In
                                      wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > > > <wuhu_software@> wrote:
                                      > > > > > > > >
                                      > > > > > > > >
                                      > > > > > > > > Kathy,
                                      > > > > > > > >
                                      > > > > > > > > Sounds like you are almost there...
                                      > > > > > > > >
                                      > > > > > > > > Go to the Weather Underground site and log in with
                                      your WU
                                      > > > > > email
                                      > > > > > > > and
                                      > > > > > > > > password.
                                      > > > > > > > >
                                      > > > > > > > > Once you are logged in, there is a "My Stations" link.
                                      > > > Click
                                      > > > > > it.
                                      > > > > > > > >
                                      > > > > > > > > On the next page you will see something like:
                                      > > > > > > > >
                                      > > > > > > > > Current Stations
                                      > > > > > > > > ID: KMI????? | data
                                      > > > > > > > >
                                      > > > > > > > > Your station id follows ID:
                                      > > > > > > > >
                                      > > > > > > > > The password entered in to WUHU is the same as you
                                      use for
                                      > > > > > your
                                      > > > > > > > > normal WU account. It *is* case sensitive.
                                      > > > > > > > >
                                      > > > > > > > >
                                      > > > > > > > > --- In
                                      wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > > > >
                                      > > > > > > > > > I do believe that it will work now (except for a
                                      minor
                                      > > > > > problem,
                                      > > > > > > I
                                      > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                      my PWS
                                      > > > > ID?
                                      > > > > > > I've
                                      > > > > > > > > > been looking at the member settings and do not see
                                      it.
                                      > > > I
                                      > > > > > think
                                      > > > > > > > its
                                      > > > > > > > > > KIL something... I was using my "handle" for the ID.
                                      > > > > > > > > >
                                      > > > > > > > > > My gauges are showing activity. I just need to see
                                      it
                                      > > > > > upload.
                                      > > > > > > > > > The problem was during the install of wuhu I chose
                                      to
                                      > > > > > install
                                      > > > > > > in
                                      > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                      put
                                      > > > it
                                      > > > > > > > there.
                                      > > > > > > > > >
                                      > > > > > > > > > Check out the weather for 60964 coming soon!
                                      > > > > > > > > >
                                      > > > > > > > > > Thanks again.
                                      > > > > > > > > > Kathy
                                      > > > > > > > > >
                                      > > > > > > > > >
                                      > > > > > > > > >
                                      > > > > > > > > > --- In
                                      > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > > > > > <wuhu_software@> wrote:
                                      > > > > > > > > > >
                                      > > > > > > > > > > Kathy,
                                      > > > > > > > > > >
                                      > > > > > > > > > > I am not sure which console you have but the next
                                      few
                                      > > > > > > > paragraphs
                                      > > > > > > > > > > assume you are using a WS-23XX type station.
                                      > > > > > > > > > >
                                      > > > > > > > > > > There are a couple of methods you can use to have
                                      WUHU
                                      > > > > > > > intercept
                                      > > > > > > > > > data
                                      > > > > > > > > > > from the console.
                                      > > > > > > > > > >
                                      > > > > > > > > > > The first is quite easy. You run Heavyweather
                                      Beta 2.0
                                      > > > > > (newer
                                      > > > > > > > > than
                                      > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                      > > > monitors
                                      > > > > a
                                      > > > > > > file
                                      > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                      > > > > > Heavweather
                                      > > > > > > and
                                      > > > > > > > > > WUHU
                                      > > > > > > > > > > must be run at all times otherwise WUHU will not
                                      > > > receive
                                      > > > > > the
                                      > > > > > > > > > > currdat.lst file updates. That method is fine if
                                      you
                                      > > > > > insist
                                      > > > > > > on
                                      > > > > > > > > > > running Heavyweather. Personally, I think
                                      Heavyweather
                                      > > > is
                                      > > > > > a
                                      > > > > > > CPU
                                      > > > > > > > > hog
                                      > > > > > > > > > > (can easily chew up 20-30% of your processor even
                                      when
                                      > > > > > idle)
                                      > > > > > > so
                                      > > > > > > > I
                                      > > > > > > > > > do
                                      > > > > > > > > > > not run it.
                                      > > > > > > > > > >
                                      > > > > > > > > > > If you run wired mode (wire between the console
                                      and
                                      > > > the
                                      > > > > > > remote
                                      > > > > > > > > > thermo
                                      > > > > > > > > > > unit), your weather data can be updated every 10
                                      > > > seconds
                                      > > > > > or
                                      > > > > > > so.
                                      > > > > > > > > In
                                      > > > > > > > > > > this case, you would probably want to run WUHU in
                                      > > > direct
                                      > > > > > > serial
                                      > > > > > > > > > > communications mode. If you are running wireless
                                      mode
                                      > > > (no
                                      > > > > > > wire
                                      > > > > > > > > > > between the console and remote thermo unit), your
                                      > > > weather
                                      > > > > > > data
                                      > > > > > > > > will
                                      > > > > > > > > > > only be updated once per minute regardless of the
                                      > > > > software
                                      > > > > > > > > > > combination you choose.
                                      > > > > > > > > > >
                                      > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                      > > > > > terminate
                                      > > > > > > the
                                      > > > > > > > > > > Heavyweather application. When you choose this
                                      method,
                                      > > > > you
                                      > > > > > > must
                                      > > > > > > > > hit
                                      > > > > > > > > > > Stop on WUHU so you can make changes to the
                                      settings.
                                      > > > In
                                      > > > > > the
                                      > > > > > > > > > general
                                      > > > > > > > > > > settings, there is a pulldown combo box. You can
                                      > > > > > select "WS-
                                      > > > > > > > 23XX
                                      > > > > > > > > > > Direct Serial Access", then to the right of the
                                      combo
                                      > > > > box,
                                      > > > > > > > select
                                      > > > > > > > > > the
                                      > > > > > > > > > > communications port that the console is hooked up
                                      to.
                                      > > > > Once
                                      > > > > > > the
                                      > > > > > > > > > > changes are made, you hit start. WUHU will then
                                      manage
                                      > > > > the
                                      > > > > > > > > > > communications with the console.
                                      > > > > > > > > > >
                                      > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                      > > > support
                                      > > > > > > > direct
                                      > > > > > > > > > > serial communications at this time so you must
                                      run the
                                      > > > > > > > > Heavyweather
                                      > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                      > > > > > application
                                      > > > > > > > > will
                                      > > > > > > > > > > write to the currdat.lst file once per minute. As
                                      with
                                      > > > > the
                                      > > > > > > > first
                                      > > > > > > > > > > method, Heavyweather Pro and WUHU must be running
                                      at
                                      > > > all
                                      > > > > > > times.
                                      > > > > > > > > > >
                                      > > > > > > > > > > Well, that is the long answer. I hope things are
                                      a bit
                                      > > > > > > clearer
                                      > > > > > > > > now.
                                      > > > > > > > > > >
                                      > > > > > > > > > >
                                      > > > > > > > > > > --- In
                                      > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                      > > > > works,
                                      > > > > > > > > although
                                      > > > > > > > > > > it
                                      > > > > > > > > > > > seems slower.
                                      > > > > > > > > > > > So, now I have it installed, not sure if it's
                                      > > > getting
                                      > > > > > the
                                      > > > > > > > > > readings,
                                      > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                      on
                                      > > > > > logging
                                      > > > > > > to
                                      > > > > > > > > > show
                                      > > > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                      > > > much
                                      > > > > in
                                      > > > > > > > there
                                      > > > > > > > > as
                                      > > > > > > > > > > > yet.
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > Perhaps some tips here would help?
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                      > > > tired
                                      > > > > > after
                                      > > > > > > > > > > bringing
                                      > > > > > > > > > > > in the new year.
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > Happy New Year!
                                      > > > > > > > > > > > Thanks for your help.
                                      > > > > > > > > > > > Kathy
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > --- In
                                      wuhu_software_group@yahoogroups.com, "<<<<<
                                      > > > > > Dickie
                                      > > > > > > > > > Bradford
                                      > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > I had this problem a few days ago with windows
                                      > > > 2000,
                                      > > > > > I
                                      > > > > > > had
                                      > > > > > > > a
                                      > > > > > > > > > > > printer
                                      > > > > > > > > > > > > installed and everytime i started WUHU it
                                      said I
                                      > > > > > needed
                                      > > > > > > a
                                      > > > > > > > > > > printer,
                                      > > > > > > > > > > > what I
                                      > > > > > > > > > > > > did was deleted the printer, rebooted and
                                      > > > reinstalled
                                      > > > > > the
                                      > > > > > > > > > printer
                                      > > > > > > > > > > > again and
                                      > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                      > > > since.
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > Dickie
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > -----Original Message-----
                                      > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                      > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com ]On
                                      > > > Behalf
                                      > > > > > Of
                                      > > > > > > > > > > > sun_spot_mom
                                      > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                      > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                      > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                      > > > installing
                                      > > > > > wuhu
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > It could all be IE7 related...
                                      > > > > > > > > > > > > When I said to go ahead and install IE7, I had
                                      > > > > > problems
                                      > > > > > > > > > > > connecting.
                                      > > > > > > > > > > > > I went through all services and stuff in
                                      startup
                                      > > > > and
                                      > > > > > it
                                      > > > > > > > > > > appeared
                                      > > > > > > > > > > > that
                                      > > > > > > > > > > > > my camera & printer services interfere with
                                      IE7,
                                      > > > so
                                      > > > > > I
                                      > > > > > > > > stopped
                                      > > > > > > > > > > them
                                      > > > > > > > > > > > > from loading. I will try loading them and
                                      > > > > restarting
                                      > > > > > > and
                                      > > > > > > > > then
                                      > > > > > > > > > > try
                                      > > > > > > > > > > > > the install again.
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                      only
                                      > > > > > tried
                                      > > > > > > 212
                                      > > > > > > > &
                                      > > > > > > > > > 214.
                                      > > > > > > > > > > > > Where is 213?
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > Thanks
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > --- In
                                      > > > wuhu_software_group@yahoogroups.com, "Brian"

                                      > > > > > > > > <yahoo@>
                                      > > > > > > > > > > > wrote:
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > I was getting the same error when WUHU would
                                      > > > try
                                      > > > > > to
                                      > > > > > > > load
                                      > > > > > > > > at
                                      > > > > > > > > > > > Windows
                                      > > > > > > > > > > > > > startup. Never really got it resolved
                                      (thought
                                      > > > I
                                      > > > > > did,
                                      > > > > > > > but
                                      > > > > > > > > it
                                      > > > > > > > > > > > > > returned). I figured it was just my
                                      machine. I
                                      > > > do
                                      > > > > > > have
                                      > > > > > > > a
                                      > > > > > > > > > > printer
                                      > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                      > > > loading
                                      > > > > > at
                                      > > > > > > > > > startup
                                      > > > > > > > > > > > prior
                                      > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                      it?
                                      > > > I
                                      > > > > > was
                                      > > > > > > > using
                                      > > > > > > > > > > > version
                                      > > > > > > > > > > > > > 214.
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                      and
                                      > > > > > trying
                                      > > > > > > > > 213.
                                      > > > > > > > > > The
                                      > > > > > > > > > > > > > problem seemed to go away. My other problem
                                      > > > > > (serial
                                      > > > > > > > port
                                      > > > > > > > > > > issue
                                      > > > > > > > > > > > with
                                      > > > > > > > > > > > > > console stopping communication with computer
                                      > > > and
                                      > > > > > > serial
                                      > > > > > > > > port
                                      > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                      > > > when
                                      > > > > I
                                      > > > > > > went
                                      > > > > > > > > > back
                                      > > > > > > > > > > to
                                      > > > > > > > > > > > > 213.
                                      > > > > > > > > > > > > > Can't say for sure though. I will say it has
                                      > > > been
                                      > > > > > > > almost
                                      > > > > > > > > a
                                      > > > > > > > > > > day
                                      > > > > > > > > > > > now
                                      > > > > > > > > > > > > > without the problems and the problems did
                                      seem
                                      > > > to
                                      > > > > > > start
                                      > > > > > > > > > when I
                                      > > > > > > > > > > > > > installed V214.
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > --- In
                                      > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > > > > > > > > > <wuhu_software@> wrote:
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > You must have a printer defined on the
                                      > > > machine
                                      > > > > > to
                                      > > > > > > > > install
                                      > > > > > > > > > > > WUHU.
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > Go to your control panel, click printers.
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > If you do not have one defined, add
                                      printer.
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > --- In
                                      > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > Please help.
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                      > > > > > > > > > > > > > > > error
                                      > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > Then:
                                      > > > > > > > > > > > > > > > WUHU setup
                                      > > > > > > > > > > > > > > > An error occurred during the move data
                                      > > > > > process: -
                                      > > > > > > 119
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > Component: DLLs
                                      > > > > > > > > > > > > > > > File group: program DLLs
                                      > > > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > I have tried both versions of the
                                      download
                                      > > > > > files:
                                      > > > > > > > the
                                      > > > > > > > > > 212
                                      > > > > > > > > > > &
                                      > > > > > > > > > > > 214
                                      > > > > > > > > > > > > > > > versions and I get the same messages.
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                      > > > upload
                                      > > > > > to
                                      > > > > > > > > > > > wunderground.
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > > > Thanks in advance.
                                      > > > > > > > > > > > > > > > Kathy
                                      > > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > >
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > >
                                      > > > > > > > > > >
                                      > > > > > > > > >
                                      > > > > > > > >
                                      > > > > > > >
                                      > > > > > >
                                      > > > > >
                                      > > > >
                                      > > >
                                      > >
                                      > >
                                      > >
                                      >
                                      >
                                      >
                                      > --
                                      > ============================================================
                                      > John Celenza
                                      > Director of Weather Technology
                                      > Phone (415) 543-5022 x105
                                      > FAX (415) 543-5044
                                      > john@...
                                      > ============================================================
                                      >




                                      --
                                      ============================================================
                                      John Celenza
                                      Director of Weather Technology
                                      Phone (415) 543-5022 x105
                                      FAX   (415) 543-5044
                                      john@...
                                      ============================================================
                                    • sun_spot_mom
                                      Okay, you guys are great. I believe I have changed the lat/lon to the correct data. I look forward to seeing St. Anne come up tomorrow. Thanks for all of your
                                      Message 18 of 26 , Jan 3, 2007
                                        Okay, you guys are great.
                                        I believe I have changed the lat/lon to the correct data.
                                        I look forward to seeing St. Anne come up tomorrow.
                                        Thanks for all of your help.

                                        Kathy

                                        --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                        <john.celenza@...> wrote:
                                        >
                                        > Hello :-)
                                        >
                                        > Sounds like you're on the right track.
                                        >
                                        > You can test which city your station is nearest to by taking the
                                        lat and lon
                                        > from the Weather Station History page and entering it into
                                        the "Fast
                                        > Forecast" box with "lat,lon". You have to use the decimal version
                                        (the one
                                        > in parentheses) with no degree symbol like:
                                        >
                                        > 37.062,-95.677
                                        >
                                        > When I tried this, I also got Dearing Kansas.
                                        >
                                        > When you change your lat/lon for the station in "My Stations", it
                                        will take
                                        > until tomorrow morning for your station to appear on the correct
                                        St. Anne
                                        > pages. This is because our databases have to update.
                                        >
                                        > -John
                                        >
                                        > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                        > >
                                        > > Kathy,
                                        > >
                                        > > I think I have found the problem.
                                        > >
                                        > > Your latitude and longitude numbers entered in the 'My Stations'
                                        page at
                                        > > WU may not be correct. The are actually pointing to Dearing,
                                        Kansas.
                                        > >
                                        > > If I pull up the forecast page for Saint Anne, Illinois:
                                        > >
                                        > >
                                        > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                        query=Saint+Anne%2C+IL#History
                                        > >
                                        > > The station is not listed.
                                        > >
                                        > > I can pull up the station history:
                                        > >
                                        > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                        ID=KILSAINT2
                                        > >
                                        > > When I click the 'View Full Conditions and Forecast' on the
                                        history page,
                                        > > I end up here:
                                        > >
                                        > >
                                        > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                        query=37.062%2C-95.677
                                        > >
                                        > > I believe the latitude and longitude entered for the station are
                                        not
                                        > > correct.
                                        > >
                                        > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                        > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                        > >
                                        > > A quick way to get your latitude and longitude is to pull up:
                                        > >
                                        > > http://terraserver.homeadvisor.msn.com
                                        > >
                                        > > Enter your street address, city and state. When you git go you
                                        can chose
                                        > > either the topo or aerial map. Choose topo.
                                        > >
                                        > > When the next screen is displayed, the URL at the top will look
                                        something
                                        > > like this:
                                        > >
                                        > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                        > > -
                                        83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.co
                                        m/image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                        > > ...
                                        > >
                                        > > Get the numbers that are associated with Alon and ALat
                                        > >
                                        > > So the data you would need is:
                                        > >
                                        > > Lat: *42.52875700*
                                        > >
                                        > > Lon: *-83.79587400*
                                        > >
                                        > > Once you have the correct numbers, copy and paste them in the 'My
                                        > > Stations' page back at Weather Underground.
                                        > >
                                        > > ---
                                        > >
                                        > > To John,
                                        > >
                                        > > What is interesting to note here is that when you pull up the
                                        page:
                                        > >
                                        > >
                                        > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                        query=37.062%2C-95.677
                                        > >
                                        > > There are stations listed from all over the country.
                                        > >
                                        > > I suspect that there is a default latitude and longitude being
                                        loaded in
                                        > > the 'My Stations' new user signup??
                                        > >
                                        > > ---
                                        > >
                                        > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > <sun_spot_mom@> wrote:
                                        > > >
                                        > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                        > > > better?) How long should it take to show up?
                                        > > >
                                        > > > Thanks
                                        > > > Kathy
                                        > > >
                                        > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > wuhu_software@ wrote:
                                        > > > >
                                        > > > > Kathy,
                                        > > > >
                                        > > > > I can see your data but you are right, it is not coming up
                                        when
                                        > > > zip
                                        > > > > code is listed.
                                        > > > >
                                        > > > > I would check under the 'My Stations' link at the Weather
                                        > > > Underground
                                        > > > > page and verify that your zip code, city and state are
                                        entered
                                        > > > > correctly there.
                                        > > > >
                                        > > > > If everything is entered correctly and the it does not show
                                        up by
                                        > > > > tomorrow, we will need to contact Weather Underground to
                                        resolve
                                        > > > it.
                                        > > > >
                                        > > > >
                                        > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > > > <sun_spot_mom@> wrote:
                                        > > > > >
                                        > > > > > I am KILSAINT2.
                                        > > > > >
                                        > > > > > Thanks for checking. I guess I am supposed to be able to
                                        look
                                        > > > it
                                        > > > > up
                                        > > > > > by zipcode, right?
                                        > > > > >
                                        > > > > > Thanks
                                        > > > > > Kathy
                                        > > > > >
                                        > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > > > <wuhu_software@> wrote:
                                        > > > > > >
                                        > > > > > >
                                        > > > > > > Kathy,
                                        > > > > > >
                                        > > > > > > What is your WU Station ID?
                                        > > > > > >
                                        > > > > > > Tried looking it up by zipcode, did not see yours in
                                        there.
                                        > > > > > >
                                        > > > > > > There was another WUHU station but it has been uploading
                                        for
                                        > > > some
                                        > > > > > > time.
                                        > > > > > >
                                        > > > > > >
                                        > > > > > > --- In
                                        wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > >
                                        > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                        day
                                        > > > to
                                        > > > > > see
                                        > > > > > > it
                                        > > > > > > > when I type in my zipcode?
                                        > > > > > > >
                                        > > > > > > > Thanks much.
                                        > > > > > > > :>)
                                        > > > > > > > Kathy
                                        > > > > > > >
                                        > > > > > > > --- In
                                        wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > > > > > <wuhu_software@> wrote:
                                        > > > > > > > >
                                        > > > > > > > >
                                        > > > > > > > > Kathy,
                                        > > > > > > > >
                                        > > > > > > > > Sounds like you are almost there...
                                        > > > > > > > >
                                        > > > > > > > > Go to the Weather Underground site and log in with
                                        your WU
                                        > > > > > email
                                        > > > > > > > and
                                        > > > > > > > > password.
                                        > > > > > > > >
                                        > > > > > > > > Once you are logged in, there is a "My Stations"
                                        link.
                                        > > > Click
                                        > > > > > it.
                                        > > > > > > > >
                                        > > > > > > > > On the next page you will see something like:
                                        > > > > > > > >
                                        > > > > > > > > Current Stations
                                        > > > > > > > > ID: KMI????? | data
                                        > > > > > > > >
                                        > > > > > > > > Your station id follows ID:
                                        > > > > > > > >
                                        > > > > > > > > The password entered in to WUHU is the same as you
                                        use for
                                        > > > > > your
                                        > > > > > > > > normal WU account. It *is* case sensitive.
                                        > > > > > > > >
                                        > > > > > > > >
                                        > > > > > > > > --- In
                                        wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > > > >
                                        > > > > > > > > > I do believe that it will work now (except for a
                                        minor
                                        > > > > > problem,
                                        > > > > > > I
                                        > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                        my PWS
                                        > > > > ID?
                                        > > > > > > I've
                                        > > > > > > > > > been looking at the member settings and do not see
                                        it.
                                        > > > I
                                        > > > > > think
                                        > > > > > > > its
                                        > > > > > > > > > KIL something... I was using my "handle" for the
                                        ID.
                                        > > > > > > > > >
                                        > > > > > > > > > My gauges are showing activity. I just need to see
                                        it
                                        > > > > > upload.
                                        > > > > > > > > > The problem was during the install of wuhu I chose
                                        to
                                        > > > > > install
                                        > > > > > > in
                                        > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                        put
                                        > > > it
                                        > > > > > > > there.
                                        > > > > > > > > >
                                        > > > > > > > > > Check out the weather for 60964 coming soon!
                                        > > > > > > > > >
                                        > > > > > > > > > Thanks again.
                                        > > > > > > > > > Kathy
                                        > > > > > > > > >
                                        > > > > > > > > >
                                        > > > > > > > > >
                                        > > > > > > > > > --- In
                                        > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > > > > > > > <wuhu_software@> wrote:
                                        > > > > > > > > > >
                                        > > > > > > > > > > Kathy,
                                        > > > > > > > > > >
                                        > > > > > > > > > > I am not sure which console you have but the
                                        next few
                                        > > > > > > > paragraphs
                                        > > > > > > > > > > assume you are using a WS-23XX type station.
                                        > > > > > > > > > >
                                        > > > > > > > > > > There are a couple of methods you can use to
                                        have WUHU
                                        > > > > > > > intercept
                                        > > > > > > > > > data
                                        > > > > > > > > > > from the console.
                                        > > > > > > > > > >
                                        > > > > > > > > > > The first is quite easy. You run Heavyweather
                                        Beta 2.0
                                        > > > > > (newer
                                        > > > > > > > > than
                                        > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                        > > > monitors
                                        > > > > a
                                        > > > > > > file
                                        > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                        > > > > > Heavweather
                                        > > > > > > and
                                        > > > > > > > > > WUHU
                                        > > > > > > > > > > must be run at all times otherwise WUHU will not
                                        > > > receive
                                        > > > > > the
                                        > > > > > > > > > > currdat.lst file updates. That method is fine if
                                        you
                                        > > > > > insist
                                        > > > > > > on
                                        > > > > > > > > > > running Heavyweather. Personally, I think
                                        Heavyweather
                                        > > > is
                                        > > > > > a
                                        > > > > > > CPU
                                        > > > > > > > > hog
                                        > > > > > > > > > > (can easily chew up 20-30% of your processor
                                        even when
                                        > > > > > idle)
                                        > > > > > > so
                                        > > > > > > > I
                                        > > > > > > > > > do
                                        > > > > > > > > > > not run it.
                                        > > > > > > > > > >
                                        > > > > > > > > > > If you run wired mode (wire between the console
                                        and
                                        > > > the
                                        > > > > > > remote
                                        > > > > > > > > > thermo
                                        > > > > > > > > > > unit), your weather data can be updated every 10
                                        > > > seconds
                                        > > > > > or
                                        > > > > > > so.
                                        > > > > > > > > In
                                        > > > > > > > > > > this case, you would probably want to run WUHU in
                                        > > > direct
                                        > > > > > > serial
                                        > > > > > > > > > > communications mode. If you are running wireless
                                        mode
                                        > > > (no
                                        > > > > > > wire
                                        > > > > > > > > > > between the console and remote thermo unit), your
                                        > > > weather
                                        > > > > > > data
                                        > > > > > > > > will
                                        > > > > > > > > > > only be updated once per minute regardless of the
                                        > > > > software
                                        > > > > > > > > > > combination you choose.
                                        > > > > > > > > > >
                                        > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                        > > > > > terminate
                                        > > > > > > the
                                        > > > > > > > > > > Heavyweather application. When you choose this
                                        method,
                                        > > > > you
                                        > > > > > > must
                                        > > > > > > > > hit
                                        > > > > > > > > > > Stop on WUHU so you can make changes to the
                                        settings.
                                        > > > In
                                        > > > > > the
                                        > > > > > > > > > general
                                        > > > > > > > > > > settings, there is a pulldown combo box. You can
                                        > > > > > select "WS-
                                        > > > > > > > 23XX
                                        > > > > > > > > > > Direct Serial Access", then to the right of the
                                        combo
                                        > > > > box,
                                        > > > > > > > select
                                        > > > > > > > > > the
                                        > > > > > > > > > > communications port that the console is hooked
                                        up to.
                                        > > > > Once
                                        > > > > > > the
                                        > > > > > > > > > > changes are made, you hit start. WUHU will then
                                        manage
                                        > > > > the
                                        > > > > > > > > > > communications with the console.
                                        > > > > > > > > > >
                                        > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                        > > > support
                                        > > > > > > > direct
                                        > > > > > > > > > > serial communications at this time so you must
                                        run the
                                        > > > > > > > > Heavyweather
                                        > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                        > > > > > application
                                        > > > > > > > > will
                                        > > > > > > > > > > write to the currdat.lst file once per minute.
                                        As with
                                        > > > > the
                                        > > > > > > > first
                                        > > > > > > > > > > method, Heavyweather Pro and WUHU must be
                                        running at
                                        > > > all
                                        > > > > > > times.
                                        > > > > > > > > > >
                                        > > > > > > > > > > Well, that is the long answer. I hope things are
                                        a bit
                                        > > > > > > clearer
                                        > > > > > > > > now.
                                        > > > > > > > > > >
                                        > > > > > > > > > >
                                        > > > > > > > > > > --- In
                                        > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > > > > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > Okay!! That worked...and interestingly IE7
                                        still
                                        > > > > works,
                                        > > > > > > > > although
                                        > > > > > > > > > > it
                                        > > > > > > > > > > > seems slower.
                                        > > > > > > > > > > > So, now I have it installed, not sure if it's
                                        > > > getting
                                        > > > > > the
                                        > > > > > > > > > readings,
                                        > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                        on
                                        > > > > > logging
                                        > > > > > > to
                                        > > > > > > > > > show
                                        > > > > > > > > > > > uploads and console comm. errors. I'm not
                                        seeing
                                        > > > much
                                        > > > > in
                                        > > > > > > > there
                                        > > > > > > > > as
                                        > > > > > > > > > > > yet.
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > Perhaps some tips here would help?
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                        > > > tired
                                        > > > > > after
                                        > > > > > > > > > > bringing
                                        > > > > > > > > > > > in the new year.
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > Happy New Year!
                                        > > > > > > > > > > > Thanks for your help.
                                        > > > > > > > > > > > Kathy
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > --- In
                                        wuhu_software_group@yahoogroups.com, "<<<<<
                                        > > > > > Dickie
                                        > > > > > > > > > Bradford
                                        > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > I had this problem a few days ago with
                                        windows
                                        > > > 2000,
                                        > > > > > I
                                        > > > > > > had
                                        > > > > > > > a
                                        > > > > > > > > > > > printer
                                        > > > > > > > > > > > > installed and everytime i started WUHU it
                                        said I
                                        > > > > > needed
                                        > > > > > > a
                                        > > > > > > > > > > printer,
                                        > > > > > > > > > > > what I
                                        > > > > > > > > > > > > did was deleted the printer, rebooted and
                                        > > > reinstalled
                                        > > > > > the
                                        > > > > > > > > > printer
                                        > > > > > > > > > > > again and
                                        > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                        > > > since.
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > Dickie
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > -----Original Message-----
                                        > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                        > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]
                                        On
                                        > > > Behalf
                                        > > > > > Of
                                        > > > > > > > > > > > sun_spot_mom
                                        > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                        > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                        > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                        > > > installing
                                        > > > > > wuhu
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > It could all be IE7 related...
                                        > > > > > > > > > > > > When I said to go ahead and install IE7, I
                                        had
                                        > > > > > problems
                                        > > > > > > > > > > > connecting.
                                        > > > > > > > > > > > > I went through all services and stuff in
                                        startup
                                        > > > > and
                                        > > > > > it
                                        > > > > > > > > > > appeared
                                        > > > > > > > > > > > that
                                        > > > > > > > > > > > > my camera & printer services interfere with
                                        IE7,
                                        > > > so
                                        > > > > > I
                                        > > > > > > > > stopped
                                        > > > > > > > > > > them
                                        > > > > > > > > > > > > from loading. I will try loading them and
                                        > > > > restarting
                                        > > > > > > and
                                        > > > > > > > > then
                                        > > > > > > > > > > try
                                        > > > > > > > > > > > > the install again.
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                        only
                                        > > > > > tried
                                        > > > > > > 212
                                        > > > > > > > &
                                        > > > > > > > > > 214.
                                        > > > > > > > > > > > > Where is 213?
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > Thanks
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > --- In
                                        > > > wuhu_software_group@yahoogroups.com, "Brian"
                                        > > > > > > > > <yahoo@>
                                        > > > > > > > > > > > wrote:
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > I was getting the same error when WUHU
                                        would
                                        > > > try
                                        > > > > > to
                                        > > > > > > > load
                                        > > > > > > > > at
                                        > > > > > > > > > > > Windows
                                        > > > > > > > > > > > > > startup. Never really got it resolved
                                        (thought
                                        > > > I
                                        > > > > > did,
                                        > > > > > > > but
                                        > > > > > > > > it
                                        > > > > > > > > > > > > > returned). I figured it was just my
                                        machine. I
                                        > > > do
                                        > > > > > > have
                                        > > > > > > > a
                                        > > > > > > > > > > printer
                                        > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                        > > > loading
                                        > > > > > at
                                        > > > > > > > > > startup
                                        > > > > > > > > > > > prior
                                        > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                        it?
                                        > > > I
                                        > > > > > was
                                        > > > > > > > using
                                        > > > > > > > > > > > version
                                        > > > > > > > > > > > > > 214.
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                        and
                                        > > > > > trying
                                        > > > > > > > > 213.
                                        > > > > > > > > > The
                                        > > > > > > > > > > > > > problem seemed to go away. My other problem
                                        > > > > > (serial
                                        > > > > > > > port
                                        > > > > > > > > > > issue
                                        > > > > > > > > > > > with
                                        > > > > > > > > > > > > > console stopping communication with
                                        computer
                                        > > > and
                                        > > > > > > serial
                                        > > > > > > > > port
                                        > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                        > > > when
                                        > > > > I
                                        > > > > > > went
                                        > > > > > > > > > back
                                        > > > > > > > > > > to
                                        > > > > > > > > > > > > 213.
                                        > > > > > > > > > > > > > Can't say for sure though. I will say it
                                        has
                                        > > > been
                                        > > > > > > > almost
                                        > > > > > > > > a
                                        > > > > > > > > > > day
                                        > > > > > > > > > > > now
                                        > > > > > > > > > > > > > without the problems and the problems did
                                        seem
                                        > > > to
                                        > > > > > > start
                                        > > > > > > > > > when I
                                        > > > > > > > > > > > > > installed V214.
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > --- In
                                        > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > > > > > > > > > > > <wuhu_software@> wrote:
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > You must have a printer defined on the
                                        > > > machine
                                        > > > > > to
                                        > > > > > > > > install
                                        > > > > > > > > > > > WUHU.
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > Go to your control panel, click printers.
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > If you do not have one defined, add
                                        printer.
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > --- In
                                        > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > Please help.
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                        > > > > > > > > > > > > > > > error
                                        > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > Then:
                                        > > > > > > > > > > > > > > > WUHU setup
                                        > > > > > > > > > > > > > > > An error occurred during the move data
                                        > > > > > process: -
                                        > > > > > > 119
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > Component: DLLs
                                        > > > > > > > > > > > > > > > File group: program DLLs
                                        > > > > > > > > > > > > > > > File: D:\program
                                        files\wuhu\teechart.ocx
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > I have tried both versions of the
                                        download
                                        > > > > > files:
                                        > > > > > > > the
                                        > > > > > > > > > 212
                                        > > > > > > > > > > &
                                        > > > > > > > > > > > 214
                                        > > > > > > > > > > > > > > > versions and I get the same messages.
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                        > > > upload
                                        > > > > > to
                                        > > > > > > > > > > > wunderground.
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > > > Thanks in advance.
                                        > > > > > > > > > > > > > > > Kathy
                                        > > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > >
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > >
                                        > > > > > > > > > >
                                        > > > > > > > > >
                                        > > > > > > > >
                                        > > > > > > >
                                        > > > > > >
                                        > > > > >
                                        > > > >
                                        > > >
                                        > >
                                        > >
                                        > >
                                        >
                                        >
                                        >
                                        > --
                                        > ============================================================
                                        > John Celenza
                                        > Director of Weather Technology
                                        > Phone (415) 543-5022 x105
                                        > FAX (415) 543-5044
                                        > john@...
                                        > ============================================================
                                        >
                                      Your message has been successfully submitted and would be delivered to recipients shortly.