Loading ...
Sorry, an error occurred while loading the content.

RE: [wuhu_software_group] Re: Error installing wuhu

Expand Messages
  • <<<<< Dickie Bradford >>>>>
    I had this problem a few days ago with windows 2000, I had a printer installed and everytime i started WUHU it said I needed a printer, what I did was
    Message 1 of 26 , Jan 1, 2007
    • 0 Attachment
      I had this problem a few days ago with windows 2000,  I had a printer installed and everytime i started WUHU it said I needed a  printer, what I did was deleted the printer, rebooted and reinstalled the printer again and the reinstalled  WUHU and it has not acted up since.
       
      Dickie
       
      -----Original Message-----
      From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of sun_spot_mom
      Sent: Monday, January 01, 2007 8:04 PM
      To: wuhu_software_group@yahoogroups.com
      Subject: [wuhu_software_group] Re: Error installing wuhu

      It could all be IE7 related...
      When I said to go ahead and install IE7, I had problems connecting.
      I went through all services and stuff in startup and it appeared that
      my camera & printer services interfere with IE7, so I stopped them
      from loading. I will try loading them and restarting and then try
      the install again.

      I also did not see version 213 anywhere. I only tried 212 & 214.
      Where is 213?

      Thanks

      --- In wuhu_software_ group@yahoogroup s.com, "Brian" <yahoo@...> wrote:
      >
      > I was getting the same error when WUHU would try to load at Windows
      > startup. Never really got it resolved (thought I did, but it
      > returned). I figured it was just my machine. I do have a printer
      > installed... I wonder if my printer wasn't loading at startup prior
      > to WUHU, therefore it was not recognizing it? I was using version
      > 214.
      >
      > I actually decided to try uninstalling 214 and trying 213. The
      > problem seemed to go away. My other problem (serial port issue with
      > console stopping communication with computer and serial port
      > indicating it was in use) seemed to go away when I went back to
      213.
      > Can't say for sure though. I will say it has been almost a day now
      > without the problems and the problems did seem to start when I
      > installed V214.
      >
      >
      >
      > --- In wuhu_software_ group@yahoogroup s.com, "wuhu_software"
      > <wuhu_software@ > wrote:
      > >
      > >
      > > You must have a printer defined on the machine to install WUHU.
      > >
      > > Go to your control panel, click printers.
      > >
      > > If you do not have one defined, add printer.
      > >
      > >
      > > --- In wuhu_software_ group@yahoogroup s.com, "sun_spot_mom"
      > > <sun_spot_mom@ > wrote:
      > > >
      > > > Please help.
      > > >
      > > > When I run install.exe I am getting:
      > > > error
      > > > Runtime error 217 at 00021AEE
      > > >
      > > > Then:
      > > > WUHU setup
      > > > An error occurred during the move data process: -119
      > > >
      > > > Component: DLLs
      > > > File group: program DLLs
      > > > File: D:\program files\wuhu\teechart .ocx
      > > >
      > > > I have tried both versions of the download files: the 212 & 214
      > > > versions and I get the same messages.
      > > >
      > > > I'm trying to get my LaCrosse 2315 to upload to wunderground.
      > > >
      > > > I have IE7, is that a problem?
      > > >
      > > > Thanks in advance.
      > > > Kathy
      > > >
      > >
      >

    • sun_spot_mom
      Okay!! That worked...and interestingly IE7 still works, although it seems slower. So, now I have it installed, not sure if it s getting the readings, tho. My
      Message 2 of 26 , Jan 1, 2007
      • 0 Attachment
        Okay!! That worked...and interestingly IE7 still works, although it
        seems slower.
        So, now I have it installed, not sure if it's getting the readings,
        tho. My gauges don't show anything. I did turn on logging to show
        uploads and console comm. errors. I'm not seeing much in there as
        yet.

        Perhaps some tips here would help?

        I will look at more again maybe tomorrow. I am tired after bringing
        in the new year.

        Happy New Year!
        Thanks for your help.
        Kathy

        --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie Bradford
        >>>>>" <dbradford@...> wrote:
        >
        > I had this problem a few days ago with windows 2000, I had a
        printer
        > installed and everytime i started WUHU it said I needed a printer,
        what I
        > did was deleted the printer, rebooted and reinstalled the printer
        again and
        > the reinstalled WUHU and it has not acted up since.
        >
        > Dickie
        >
        > -----Original Message-----
        > From: wuhu_software_group@yahoogroups.com
        > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
        sun_spot_mom
        > Sent: Monday, January 01, 2007 8:04 PM
        > To: wuhu_software_group@yahoogroups.com
        > Subject: [wuhu_software_group] Re: Error installing wuhu
        >
        >
        > It could all be IE7 related...
        > When I said to go ahead and install IE7, I had problems
        connecting.
        > I went through all services and stuff in startup and it appeared
        that
        > my camera & printer services interfere with IE7, so I stopped them
        > from loading. I will try loading them and restarting and then try
        > the install again.
        >
        > I also did not see version 213 anywhere. I only tried 212 & 214.
        > Where is 213?
        >
        > Thanks
        >
        > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
        wrote:
        > >
        > > I was getting the same error when WUHU would try to load at
        Windows
        > > startup. Never really got it resolved (thought I did, but it
        > > returned). I figured it was just my machine. I do have a printer
        > > installed...I wonder if my printer wasn't loading at startup
        prior
        > > to WUHU, therefore it was not recognizing it? I was using
        version
        > > 214.
        > >
        > > I actually decided to try uninstalling 214 and trying 213. The
        > > problem seemed to go away. My other problem (serial port issue
        with
        > > console stopping communication with computer and serial port
        > > indicating it was in use) seemed to go away when I went back to
        > 213.
        > > Can't say for sure though. I will say it has been almost a day
        now
        > > without the problems and the problems did seem to start when I
        > > installed V214.
        > >
        > >
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
        > > <wuhu_software@> wrote:
        > > >
        > > >
        > > > You must have a printer defined on the machine to install
        WUHU.
        > > >
        > > > Go to your control panel, click printers.
        > > >
        > > > If you do not have one defined, add printer.
        > > >
        > > >
        > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
        > > > <sun_spot_mom@> wrote:
        > > > >
        > > > > Please help.
        > > > >
        > > > > When I run install.exe I am getting:
        > > > > error
        > > > > Runtime error 217 at 00021AEE
        > > > >
        > > > > Then:
        > > > > WUHU setup
        > > > > An error occurred during the move data process: -119
        > > > >
        > > > > Component: DLLs
        > > > > File group: program DLLs
        > > > > File: D:\program files\wuhu\teechart.ocx
        > > > >
        > > > > I have tried both versions of the download files: the 212 &
        214
        > > > > versions and I get the same messages.
        > > > >
        > > > > I'm trying to get my LaCrosse 2315 to upload to
        wunderground.
        > > > >
        > > > > I have IE7, is that a problem?
        > > > >
        > > > > Thanks in advance.
        > > > > Kathy
        > > > >
        > > >
        > >
        >
      • Brian
        213 is between 214 and 212 on the dowload page. The link is much closer to the 212 link than the 214 link on the page. I have a Lexmark printer as well. Could
        Message 3 of 26 , Jan 1, 2007
        • 0 Attachment
          213 is between 214 and 212 on the dowload page. The link is much
          closer to the 212 link than the 214 link on the page.

          I have a Lexmark printer as well. Could this be a problem related to
          WUHU's recognition of Lexmark printers?

          Brian

          --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
          <sun_spot_mom@...> wrote:
          >
          > It could all be IE7 related...
          > When I said to go ahead and install IE7, I had problems connecting.
          > I went through all services and stuff in startup and it appeared that
          > my camera & printer services interfere with IE7, so I stopped them
          > from loading. I will try loading them and restarting and then try
          > the install again.
          >
          > I also did not see version 213 anywhere. I only tried 212 & 214.
          > Where is 213?
          >
          > Thanks
          >
          > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@> wrote:
          > >
          > > I was getting the same error when WUHU would try to load at Windows
          > > startup. Never really got it resolved (thought I did, but it
          > > returned). I figured it was just my machine. I do have a printer
          > > installed...I wonder if my printer wasn't loading at startup prior
          > > to WUHU, therefore it was not recognizing it? I was using version
          > > 214.
          > >
          > > I actually decided to try uninstalling 214 and trying 213. The
          > > problem seemed to go away. My other problem (serial port issue with
          > > console stopping communication with computer and serial port
          > > indicating it was in use) seemed to go away when I went back to
          > 213.
          > > Can't say for sure though. I will say it has been almost a day now
          > > without the problems and the problems did seem to start when I
          > > installed V214.
          > >
          > >
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
          > > <wuhu_software@> wrote:
          > > >
          > > >
          > > > You must have a printer defined on the machine to install WUHU.
          > > >
          > > > Go to your control panel, click printers.
          > > >
          > > > If you do not have one defined, add printer.
          > > >
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
          > > > <sun_spot_mom@> wrote:
          > > > >
          > > > > Please help.
          > > > >
          > > > > When I run install.exe I am getting:
          > > > > error
          > > > > Runtime error 217 at 00021AEE
          > > > >
          > > > > Then:
          > > > > WUHU setup
          > > > > An error occurred during the move data process: -119
          > > > >
          > > > > Component: DLLs
          > > > > File group: program DLLs
          > > > > File: D:\program files\wuhu\teechart.ocx
          > > > >
          > > > > I have tried both versions of the download files: the 212 & 214
          > > > > versions and I get the same messages.
          > > > >
          > > > > I'm trying to get my LaCrosse 2315 to upload to wunderground.
          > > > >
          > > > > I have IE7, is that a problem?
          > > > >
          > > > > Thanks in advance.
          > > > > Kathy
          > > > >
          > > >
          > >
          >
        • steve_03222
          Hi, I have a Lexmark Printer and have no issues, so I would tend to think it is not the type of printer. Steve
          Message 4 of 26 , Jan 1, 2007
          • 0 Attachment
            Hi,
            I have a Lexmark Printer and have no issues, so I would tend to think
            it is not the type of printer.

            Steve
          • wuhu_software
            Brian, The problems is the TeeChart ActiveX charting object that is used to diplay the weather data graphs. It is a quite old version that I had paid for way
            Message 5 of 26 , Jan 1, 2007
            • 0 Attachment
              Brian,

              The problems is the TeeChart ActiveX charting object that is used to
              diplay the weather data graphs. It is a quite old version that I had
              paid for way back when it first came out (v3.0). There was no
              software update so the only resolution is to have a printer defined,
              otherwise it crashes the entire application.

              I would upgrade the control however now it is a bit pricey (you do
              not get much of a upgrade discount). As I recall, the price was
              somewhere around $250. That is hard to do on a freeware application
              budget.

              My guess is that some of the newer computers with USB printer drivers
              may hesitate when starting Windows. When the ActiveX object attempts
              to open the default printer, and the driver is not fully loaded, the
              control crashes and burns.


              --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@...> wrote:
              >
              > 213 is between 214 and 212 on the dowload page. The link is much
              > closer to the 212 link than the 214 link on the page.
              >
              > I have a Lexmark printer as well. Could this be a problem related to
              > WUHU's recognition of Lexmark printers?
              >
              > Brian
              >
              > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
              > <sun_spot_mom@> wrote:
              > >
              > > It could all be IE7 related...
              > > When I said to go ahead and install IE7, I had problems
              connecting.
              > > I went through all services and stuff in startup and it appeared
              that
              > > my camera & printer services interfere with IE7, so I stopped
              them
              > > from loading. I will try loading them and restarting and then
              try
              > > the install again.
              > >
              > > I also did not see version 213 anywhere. I only tried 212 &
              214.
              > > Where is 213?
              > >
              > > Thanks
              > >
              > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
              wrote:
              > > >
              > > > I was getting the same error when WUHU would try to load at
              Windows
              > > > startup. Never really got it resolved (thought I did, but it
              > > > returned). I figured it was just my machine. I do have a
              printer
              > > > installed...I wonder if my printer wasn't loading at startup
              prior
              > > > to WUHU, therefore it was not recognizing it? I was using
              version
              > > > 214.
              > > >
              > > > I actually decided to try uninstalling 214 and trying 213. The
              > > > problem seemed to go away. My other problem (serial port issue
              with
              > > > console stopping communication with computer and serial port
              > > > indicating it was in use) seemed to go away when I went back to
              > > 213.
              > > > Can't say for sure though. I will say it has been almost a day
              now
              > > > without the problems and the problems did seem to start when I
              > > > installed V214.
              > > >
              > > >
              > > >
              > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
              > > > <wuhu_software@> wrote:
              > > > >
              > > > >
              > > > > You must have a printer defined on the machine to install
              WUHU.
              > > > >
              > > > > Go to your control panel, click printers.
              > > > >
              > > > > If you do not have one defined, add printer.
              > > > >
              > > > >
              > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
              > > > > <sun_spot_mom@> wrote:
              > > > > >
              > > > > > Please help.
              > > > > >
              > > > > > When I run install.exe I am getting:
              > > > > > error
              > > > > > Runtime error 217 at 00021AEE
              > > > > >
              > > > > > Then:
              > > > > > WUHU setup
              > > > > > An error occurred during the move data process: -119
              > > > > >
              > > > > > Component: DLLs
              > > > > > File group: program DLLs
              > > > > > File: D:\program files\wuhu\teechart.ocx
              > > > > >
              > > > > > I have tried both versions of the download files: the 212 &
              214
              > > > > > versions and I get the same messages.
              > > > > >
              > > > > > I'm trying to get my LaCrosse 2315 to upload to
              wunderground.
              > > > > >
              > > > > > I have IE7, is that a problem?
              > > > > >
              > > > > > Thanks in advance.
              > > > > > Kathy
              > > > > >
              > > > >
              > > >
              > >
              >
            • wuhu_software
              Kathy, I am not sure which console you have but the next few paragraphs assume you are using a WS-23XX type station. There are a couple of methods you can use
              Message 6 of 26 , Jan 1, 2007
              • 0 Attachment
                Kathy,

                I am not sure which console you have but the next few paragraphs
                assume you are using a WS-23XX type station.

                There are a couple of methods you can use to have WUHU intercept data
                from the console.

                The first is quite easy. You run Heavyweather Beta 2.0 (newer than
                the version that ships on CD), you run WUHU, it monitors a file
                called currdat.lst (stored in C:\Heavyweather). Heavweather and WUHU
                must be run at all times otherwise WUHU will not receive the
                currdat.lst file updates. That method is fine if you insist on
                running Heavyweather. Personally, I think Heavyweather is a CPU hog
                (can easily chew up 20-30% of your processor even when idle) so I do
                not run it.

                If you run wired mode (wire between the console and the remote thermo
                unit), your weather data can be updated every 10 seconds or so. In
                this case, you would probably want to run WUHU in direct serial
                communications mode. If you are running wireless mode (no wire
                between the console and remote thermo unit), your weather data will
                only be updated once per minute regardless of the software
                combination you choose.

                When you run WUHU in direct serial mode, you must terminate the
                Heavyweather application. When you choose this method, you must hit
                Stop on WUHU so you can make changes to the settings. In the general
                settings, there is a pulldown combo box. You can select "WS-23XX
                Direct Serial Access", then to the right of the combo box, select the
                communications port that the console is hooked up to. Once the
                changes are made, you hit start. WUHU will then manage the
                communications with the console.

                If you have a WS-36XX type station, WUHU does not support direct
                serial communications at this time so you must run the Heavyweather
                Pro application. Like Heavyweather Beta 2.0, this application will
                write to the currdat.lst file once per minute. As with the first
                method, Heavyweather Pro and WUHU must be running at all times.

                Well, that is the long answer. I hope things are a bit clearer now.


                --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                <sun_spot_mom@...> wrote:
                >
                > Okay!! That worked...and interestingly IE7 still works, although
                it
                > seems slower.
                > So, now I have it installed, not sure if it's getting the readings,
                > tho. My gauges don't show anything. I did turn on logging to show
                > uploads and console comm. errors. I'm not seeing much in there as
                > yet.
                >
                > Perhaps some tips here would help?
                >
                > I will look at more again maybe tomorrow. I am tired after
                bringing
                > in the new year.
                >
                > Happy New Year!
                > Thanks for your help.
                > Kathy
                >
                > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie Bradford
                > >>>>>" <dbradford@> wrote:
                > >
                > > I had this problem a few days ago with windows 2000, I had a
                > printer
                > > installed and everytime i started WUHU it said I needed a
                printer,
                > what I
                > > did was deleted the printer, rebooted and reinstalled the printer
                > again and
                > > the reinstalled WUHU and it has not acted up since.
                > >
                > > Dickie
                > >
                > > -----Original Message-----
                > > From: wuhu_software_group@yahoogroups.com
                > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                > sun_spot_mom
                > > Sent: Monday, January 01, 2007 8:04 PM
                > > To: wuhu_software_group@yahoogroups.com
                > > Subject: [wuhu_software_group] Re: Error installing wuhu
                > >
                > >
                > > It could all be IE7 related...
                > > When I said to go ahead and install IE7, I had problems
                > connecting.
                > > I went through all services and stuff in startup and it
                appeared
                > that
                > > my camera & printer services interfere with IE7, so I stopped
                them
                > > from loading. I will try loading them and restarting and then
                try
                > > the install again.
                > >
                > > I also did not see version 213 anywhere. I only tried 212 & 214.
                > > Where is 213?
                > >
                > > Thanks
                > >
                > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
                > wrote:
                > > >
                > > > I was getting the same error when WUHU would try to load at
                > Windows
                > > > startup. Never really got it resolved (thought I did, but it
                > > > returned). I figured it was just my machine. I do have a
                printer
                > > > installed...I wonder if my printer wasn't loading at startup
                > prior
                > > > to WUHU, therefore it was not recognizing it? I was using
                > version
                > > > 214.
                > > >
                > > > I actually decided to try uninstalling 214 and trying 213. The
                > > > problem seemed to go away. My other problem (serial port
                issue
                > with
                > > > console stopping communication with computer and serial port
                > > > indicating it was in use) seemed to go away when I went back
                to
                > > 213.
                > > > Can't say for sure though. I will say it has been almost a
                day
                > now
                > > > without the problems and the problems did seem to start when I
                > > > installed V214.
                > > >
                > > >
                > > >
                > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                > > > <wuhu_software@> wrote:
                > > > >
                > > > >
                > > > > You must have a printer defined on the machine to install
                > WUHU.
                > > > >
                > > > > Go to your control panel, click printers.
                > > > >
                > > > > If you do not have one defined, add printer.
                > > > >
                > > > >
                > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                > > > > <sun_spot_mom@> wrote:
                > > > > >
                > > > > > Please help.
                > > > > >
                > > > > > When I run install.exe I am getting:
                > > > > > error
                > > > > > Runtime error 217 at 00021AEE
                > > > > >
                > > > > > Then:
                > > > > > WUHU setup
                > > > > > An error occurred during the move data process: -119
                > > > > >
                > > > > > Component: DLLs
                > > > > > File group: program DLLs
                > > > > > File: D:\program files\wuhu\teechart.ocx
                > > > > >
                > > > > > I have tried both versions of the download files: the 212
                &
                > 214
                > > > > > versions and I get the same messages.
                > > > > >
                > > > > > I'm trying to get my LaCrosse 2315 to upload to
                > wunderground.
                > > > > >
                > > > > > I have IE7, is that a problem?
                > > > > >
                > > > > > Thanks in advance.
                > > > > > Kathy
                > > > > >
                > > > >
                > > >
                > >
                >
              • sun_spot_mom
                I do believe that it will work now (except for a minor problem, I don t think I know my ID, duh). Where do I locate my PWS ID? I ve been looking at the member
                Message 7 of 26 , Jan 2, 2007
                • 0 Attachment
                  I do believe that it will work now (except for a minor problem, I
                  don't think I know my ID, duh). Where do I locate my PWS ID? I've
                  been looking at the member settings and do not see it. I think its
                  KIL something... I was using my "handle" for the ID.

                  My gauges are showing activity. I just need to see it upload.
                  The problem was during the install of wuhu I chose to install in
                  d:\ . Since it asked I thought it would be okay to put it there.

                  Check out the weather for 60964 coming soon!

                  Thanks again.
                  Kathy



                  --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  <wuhu_software@...> wrote:
                  >
                  > Kathy,
                  >
                  > I am not sure which console you have but the next few paragraphs
                  > assume you are using a WS-23XX type station.
                  >
                  > There are a couple of methods you can use to have WUHU intercept
                  data
                  > from the console.
                  >
                  > The first is quite easy. You run Heavyweather Beta 2.0 (newer than
                  > the version that ships on CD), you run WUHU, it monitors a file
                  > called currdat.lst (stored in C:\Heavyweather). Heavweather and
                  WUHU
                  > must be run at all times otherwise WUHU will not receive the
                  > currdat.lst file updates. That method is fine if you insist on
                  > running Heavyweather. Personally, I think Heavyweather is a CPU hog
                  > (can easily chew up 20-30% of your processor even when idle) so I
                  do
                  > not run it.
                  >
                  > If you run wired mode (wire between the console and the remote
                  thermo
                  > unit), your weather data can be updated every 10 seconds or so. In
                  > this case, you would probably want to run WUHU in direct serial
                  > communications mode. If you are running wireless mode (no wire
                  > between the console and remote thermo unit), your weather data will
                  > only be updated once per minute regardless of the software
                  > combination you choose.
                  >
                  > When you run WUHU in direct serial mode, you must terminate the
                  > Heavyweather application. When you choose this method, you must hit
                  > Stop on WUHU so you can make changes to the settings. In the
                  general
                  > settings, there is a pulldown combo box. You can select "WS-23XX
                  > Direct Serial Access", then to the right of the combo box, select
                  the
                  > communications port that the console is hooked up to. Once the
                  > changes are made, you hit start. WUHU will then manage the
                  > communications with the console.
                  >
                  > If you have a WS-36XX type station, WUHU does not support direct
                  > serial communications at this time so you must run the Heavyweather
                  > Pro application. Like Heavyweather Beta 2.0, this application will
                  > write to the currdat.lst file once per minute. As with the first
                  > method, Heavyweather Pro and WUHU must be running at all times.
                  >
                  > Well, that is the long answer. I hope things are a bit clearer now.
                  >
                  >
                  > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                  > <sun_spot_mom@> wrote:
                  > >
                  > > Okay!! That worked...and interestingly IE7 still works, although
                  > it
                  > > seems slower.
                  > > So, now I have it installed, not sure if it's getting the
                  readings,
                  > > tho. My gauges don't show anything. I did turn on logging to
                  show
                  > > uploads and console comm. errors. I'm not seeing much in there as
                  > > yet.
                  > >
                  > > Perhaps some tips here would help?
                  > >
                  > > I will look at more again maybe tomorrow. I am tired after
                  > bringing
                  > > in the new year.
                  > >
                  > > Happy New Year!
                  > > Thanks for your help.
                  > > Kathy
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                  Bradford
                  > > >>>>>" <dbradford@> wrote:
                  > > >
                  > > > I had this problem a few days ago with windows 2000, I had a
                  > > printer
                  > > > installed and everytime i started WUHU it said I needed a
                  > printer,
                  > > what I
                  > > > did was deleted the printer, rebooted and reinstalled the
                  printer
                  > > again and
                  > > > the reinstalled WUHU and it has not acted up since.
                  > > >
                  > > > Dickie
                  > > >
                  > > > -----Original Message-----
                  > > > From: wuhu_software_group@yahoogroups.com
                  > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                  > > sun_spot_mom
                  > > > Sent: Monday, January 01, 2007 8:04 PM
                  > > > To: wuhu_software_group@yahoogroups.com
                  > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                  > > >
                  > > >
                  > > > It could all be IE7 related...
                  > > > When I said to go ahead and install IE7, I had problems
                  > > connecting.
                  > > > I went through all services and stuff in startup and it
                  > appeared
                  > > that
                  > > > my camera & printer services interfere with IE7, so I stopped
                  > them
                  > > > from loading. I will try loading them and restarting and then
                  > try
                  > > > the install again.
                  > > >
                  > > > I also did not see version 213 anywhere. I only tried 212 &
                  214.
                  > > > Where is 213?
                  > > >
                  > > > Thanks
                  > > >
                  > > > --- In wuhu_software_group@yahoogroups.com, "Brian" <yahoo@>
                  > > wrote:
                  > > > >
                  > > > > I was getting the same error when WUHU would try to load at
                  > > Windows
                  > > > > startup. Never really got it resolved (thought I did, but it
                  > > > > returned). I figured it was just my machine. I do have a
                  > printer
                  > > > > installed...I wonder if my printer wasn't loading at
                  startup
                  > > prior
                  > > > > to WUHU, therefore it was not recognizing it? I was using
                  > > version
                  > > > > 214.
                  > > > >
                  > > > > I actually decided to try uninstalling 214 and trying 213.
                  The
                  > > > > problem seemed to go away. My other problem (serial port
                  > issue
                  > > with
                  > > > > console stopping communication with computer and serial port
                  > > > > indicating it was in use) seemed to go away when I went
                  back
                  > to
                  > > > 213.
                  > > > > Can't say for sure though. I will say it has been almost a
                  > day
                  > > now
                  > > > > without the problems and the problems did seem to start
                  when I
                  > > > > installed V214.
                  > > > >
                  > > > >
                  > > > >
                  > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                  > > > > <wuhu_software@> wrote:
                  > > > > >
                  > > > > >
                  > > > > > You must have a printer defined on the machine to install
                  > > WUHU.
                  > > > > >
                  > > > > > Go to your control panel, click printers.
                  > > > > >
                  > > > > > If you do not have one defined, add printer.
                  > > > > >
                  > > > > >
                  > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                  > > > > > <sun_spot_mom@> wrote:
                  > > > > > >
                  > > > > > > Please help.
                  > > > > > >
                  > > > > > > When I run install.exe I am getting:
                  > > > > > > error
                  > > > > > > Runtime error 217 at 00021AEE
                  > > > > > >
                  > > > > > > Then:
                  > > > > > > WUHU setup
                  > > > > > > An error occurred during the move data process: -119
                  > > > > > >
                  > > > > > > Component: DLLs
                  > > > > > > File group: program DLLs
                  > > > > > > File: D:\program files\wuhu\teechart.ocx
                  > > > > > >
                  > > > > > > I have tried both versions of the download files: the
                  212
                  > &
                  > > 214
                  > > > > > > versions and I get the same messages.
                  > > > > > >
                  > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                  > > wunderground.
                  > > > > > >
                  > > > > > > I have IE7, is that a problem?
                  > > > > > >
                  > > > > > > Thanks in advance.
                  > > > > > > Kathy
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                • steve_03222
                  Kathy, If you click on MY Stations on the left it shoould bring you to a screen that will show your station ID. If you are logged in as a member at WU. Steve
                  Message 8 of 26 , Jan 2, 2007
                  • 0 Attachment
                    Kathy,
                    If you click on "MY Stations" on the left it shoould bring you to a
                    screen that will show your station ID. If you are logged in as a
                    member at WU.

                    Steve
                  • wuhu_software
                    Kathy, Sounds like you are almost there... Go to the Weather Underground site and log in with your WU email and password. Once you are logged in, there is a
                    Message 9 of 26 , Jan 2, 2007
                    • 0 Attachment
                      Kathy,

                      Sounds like you are almost there...

                      Go to the Weather Underground site and log in with your WU email and
                      password.

                      Once you are logged in, there is a "My Stations" link. Click it.

                      On the next page you will see something like:

                      Current Stations
                      ID: KMI????? | data

                      Your station id follows ID:

                      The password entered in to WUHU is the same as you use for your
                      normal WU account. It *is* case sensitive.


                      --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      <sun_spot_mom@...> wrote:
                      >
                      > I do believe that it will work now (except for a minor problem, I
                      > don't think I know my ID, duh). Where do I locate my PWS ID? I've
                      > been looking at the member settings and do not see it. I think its
                      > KIL something... I was using my "handle" for the ID.
                      >
                      > My gauges are showing activity. I just need to see it upload.
                      > The problem was during the install of wuhu I chose to install in
                      > d:\ . Since it asked I thought it would be okay to put it there.
                      >
                      > Check out the weather for 60964 coming soon!
                      >
                      > Thanks again.
                      > Kathy
                      >
                      >
                      >
                      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > <wuhu_software@> wrote:
                      > >
                      > > Kathy,
                      > >
                      > > I am not sure which console you have but the next few paragraphs
                      > > assume you are using a WS-23XX type station.
                      > >
                      > > There are a couple of methods you can use to have WUHU intercept
                      > data
                      > > from the console.
                      > >
                      > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                      than
                      > > the version that ships on CD), you run WUHU, it monitors a file
                      > > called currdat.lst (stored in C:\Heavyweather). Heavweather and
                      > WUHU
                      > > must be run at all times otherwise WUHU will not receive the
                      > > currdat.lst file updates. That method is fine if you insist on
                      > > running Heavyweather. Personally, I think Heavyweather is a CPU
                      hog
                      > > (can easily chew up 20-30% of your processor even when idle) so I
                      > do
                      > > not run it.
                      > >
                      > > If you run wired mode (wire between the console and the remote
                      > thermo
                      > > unit), your weather data can be updated every 10 seconds or so.
                      In
                      > > this case, you would probably want to run WUHU in direct serial
                      > > communications mode. If you are running wireless mode (no wire
                      > > between the console and remote thermo unit), your weather data
                      will
                      > > only be updated once per minute regardless of the software
                      > > combination you choose.
                      > >
                      > > When you run WUHU in direct serial mode, you must terminate the
                      > > Heavyweather application. When you choose this method, you must
                      hit
                      > > Stop on WUHU so you can make changes to the settings. In the
                      > general
                      > > settings, there is a pulldown combo box. You can select "WS-23XX
                      > > Direct Serial Access", then to the right of the combo box, select
                      > the
                      > > communications port that the console is hooked up to. Once the
                      > > changes are made, you hit start. WUHU will then manage the
                      > > communications with the console.
                      > >
                      > > If you have a WS-36XX type station, WUHU does not support direct
                      > > serial communications at this time so you must run the
                      Heavyweather
                      > > Pro application. Like Heavyweather Beta 2.0, this application
                      will
                      > > write to the currdat.lst file once per minute. As with the first
                      > > method, Heavyweather Pro and WUHU must be running at all times.
                      > >
                      > > Well, that is the long answer. I hope things are a bit clearer
                      now.
                      > >
                      > >
                      > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > <sun_spot_mom@> wrote:
                      > > >
                      > > > Okay!! That worked...and interestingly IE7 still works,
                      although
                      > > it
                      > > > seems slower.
                      > > > So, now I have it installed, not sure if it's getting the
                      > readings,
                      > > > tho. My gauges don't show anything. I did turn on logging to
                      > show
                      > > > uploads and console comm. errors. I'm not seeing much in there
                      as
                      > > > yet.
                      > > >
                      > > > Perhaps some tips here would help?
                      > > >
                      > > > I will look at more again maybe tomorrow. I am tired after
                      > > bringing
                      > > > in the new year.
                      > > >
                      > > > Happy New Year!
                      > > > Thanks for your help.
                      > > > Kathy
                      > > >
                      > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                      > Bradford
                      > > > >>>>>" <dbradford@> wrote:
                      > > > >
                      > > > > I had this problem a few days ago with windows 2000, I had a
                      > > > printer
                      > > > > installed and everytime i started WUHU it said I needed a
                      > > printer,
                      > > > what I
                      > > > > did was deleted the printer, rebooted and reinstalled the
                      > printer
                      > > > again and
                      > > > > the reinstalled WUHU and it has not acted up since.
                      > > > >
                      > > > > Dickie
                      > > > >
                      > > > > -----Original Message-----
                      > > > > From: wuhu_software_group@yahoogroups.com
                      > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                      > > > sun_spot_mom
                      > > > > Sent: Monday, January 01, 2007 8:04 PM
                      > > > > To: wuhu_software_group@yahoogroups.com
                      > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                      > > > >
                      > > > >
                      > > > > It could all be IE7 related...
                      > > > > When I said to go ahead and install IE7, I had problems
                      > > > connecting.
                      > > > > I went through all services and stuff in startup and it
                      > > appeared
                      > > > that
                      > > > > my camera & printer services interfere with IE7, so I
                      stopped
                      > > them
                      > > > > from loading. I will try loading them and restarting and
                      then
                      > > try
                      > > > > the install again.
                      > > > >
                      > > > > I also did not see version 213 anywhere. I only tried 212 &
                      > 214.
                      > > > > Where is 213?
                      > > > >
                      > > > > Thanks
                      > > > >
                      > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                      <yahoo@>
                      > > > wrote:
                      > > > > >
                      > > > > > I was getting the same error when WUHU would try to load
                      at
                      > > > Windows
                      > > > > > startup. Never really got it resolved (thought I did, but
                      it
                      > > > > > returned). I figured it was just my machine. I do have a
                      > > printer
                      > > > > > installed...I wonder if my printer wasn't loading at
                      > startup
                      > > > prior
                      > > > > > to WUHU, therefore it was not recognizing it? I was using
                      > > > version
                      > > > > > 214.
                      > > > > >
                      > > > > > I actually decided to try uninstalling 214 and trying
                      213.
                      > The
                      > > > > > problem seemed to go away. My other problem (serial port
                      > > issue
                      > > > with
                      > > > > > console stopping communication with computer and serial
                      port
                      > > > > > indicating it was in use) seemed to go away when I went
                      > back
                      > > to
                      > > > > 213.
                      > > > > > Can't say for sure though. I will say it has been almost
                      a
                      > > day
                      > > > now
                      > > > > > without the problems and the problems did seem to start
                      > when I
                      > > > > > installed V214.
                      > > > > >
                      > > > > >
                      > > > > >
                      > > > > > --- In
                      wuhu_software_group@yahoogroups.com, "wuhu_software"
                      > > > > > <wuhu_software@> wrote:
                      > > > > > >
                      > > > > > >
                      > > > > > > You must have a printer defined on the machine to
                      install
                      > > > WUHU.
                      > > > > > >
                      > > > > > > Go to your control panel, click printers.
                      > > > > > >
                      > > > > > > If you do not have one defined, add printer.
                      > > > > > >
                      > > > > > >
                      > > > > > > --- In
                      wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                      > > > > > > <sun_spot_mom@> wrote:
                      > > > > > > >
                      > > > > > > > Please help.
                      > > > > > > >
                      > > > > > > > When I run install.exe I am getting:
                      > > > > > > > error
                      > > > > > > > Runtime error 217 at 00021AEE
                      > > > > > > >
                      > > > > > > > Then:
                      > > > > > > > WUHU setup
                      > > > > > > > An error occurred during the move data process: -119
                      > > > > > > >
                      > > > > > > > Component: DLLs
                      > > > > > > > File group: program DLLs
                      > > > > > > > File: D:\program files\wuhu\teechart.ocx
                      > > > > > > >
                      > > > > > > > I have tried both versions of the download files: the
                      > 212
                      > > &
                      > > > 214
                      > > > > > > > versions and I get the same messages.
                      > > > > > > >
                      > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                      > > > wunderground.
                      > > > > > > >
                      > > > > > > > I have IE7, is that a problem?
                      > > > > > > >
                      > > > > > > > Thanks in advance.
                      > > > > > > > Kathy
                      > > > > > > >
                      > > > > > >
                      > > > > >
                      > > > >
                      > > >
                      > >
                      >
                    • sun_spot_mom
                      Steve Finally found another post with where to locate it. Sorry to have bothered you again. I m hoping this is all good to go now. Just waiting to see it
                      Message 10 of 26 , Jan 2, 2007
                      • 0 Attachment
                        Steve
                        Finally found another post with where to locate it. Sorry to have
                        bothered you again.
                        I'm hoping this is all good to go now. Just waiting to see it upload
                        now.

                        Thanks again.
                        Kathy

                        --- In wuhu_software_group@yahoogroups.com, "steve_03222"
                        <steve_03222@...> wrote:
                        >
                        > Kathy,
                        > If you click on "MY Stations" on the left it shoould bring you to a
                        > screen that will show your station ID. If you are logged in as a
                        > member at WU.
                        >
                        > Steve
                        >
                      • sun_spot_mom
                        Check out the weather at 60964! Thanks much for all of your help. Kathy
                        Message 11 of 26 , Jan 2, 2007
                        • 0 Attachment
                          Check out the weather at 60964!
                          Thanks much for all of your help.

                          Kathy
                          --- In wuhu_software_group@yahoogroups.com, "steve_03222"
                          <steve_03222@...> wrote:
                          >
                          > Kathy,
                          > If you click on "MY Stations" on the left it shoould bring you to a
                          > screen that will show your station ID. If you are logged in as a
                          > member at WU.
                          >
                          > Steve
                          >
                        • sun_spot_mom
                          Yes, I logged in and saw my data. Do I have to wait a day to see it when I type in my zipcode? Thanks much. ... Kathy ... and ... its ... there. ...
                          Message 12 of 26 , Jan 2, 2007
                          • 0 Attachment
                            Yes, I logged in and saw my data. Do I have to wait a day to see it
                            when I type in my zipcode?

                            Thanks much.
                            :>)
                            Kathy

                            --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            <wuhu_software@...> wrote:
                            >
                            >
                            > Kathy,
                            >
                            > Sounds like you are almost there...
                            >
                            > Go to the Weather Underground site and log in with your WU email
                            and
                            > password.
                            >
                            > Once you are logged in, there is a "My Stations" link. Click it.
                            >
                            > On the next page you will see something like:
                            >
                            > Current Stations
                            > ID: KMI????? | data
                            >
                            > Your station id follows ID:
                            >
                            > The password entered in to WUHU is the same as you use for your
                            > normal WU account. It *is* case sensitive.
                            >
                            >
                            > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > <sun_spot_mom@> wrote:
                            > >
                            > > I do believe that it will work now (except for a minor problem, I
                            > > don't think I know my ID, duh). Where do I locate my PWS ID? I've
                            > > been looking at the member settings and do not see it. I think
                            its
                            > > KIL something... I was using my "handle" for the ID.
                            > >
                            > > My gauges are showing activity. I just need to see it upload.
                            > > The problem was during the install of wuhu I chose to install in
                            > > d:\ . Since it asked I thought it would be okay to put it
                            there.
                            > >
                            > > Check out the weather for 60964 coming soon!
                            > >
                            > > Thanks again.
                            > > Kathy
                            > >
                            > >
                            > >
                            > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > <wuhu_software@> wrote:
                            > > >
                            > > > Kathy,
                            > > >
                            > > > I am not sure which console you have but the next few
                            paragraphs
                            > > > assume you are using a WS-23XX type station.
                            > > >
                            > > > There are a couple of methods you can use to have WUHU
                            intercept
                            > > data
                            > > > from the console.
                            > > >
                            > > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                            > than
                            > > > the version that ships on CD), you run WUHU, it monitors a file
                            > > > called currdat.lst (stored in C:\Heavyweather). Heavweather and
                            > > WUHU
                            > > > must be run at all times otherwise WUHU will not receive the
                            > > > currdat.lst file updates. That method is fine if you insist on
                            > > > running Heavyweather. Personally, I think Heavyweather is a CPU
                            > hog
                            > > > (can easily chew up 20-30% of your processor even when idle) so
                            I
                            > > do
                            > > > not run it.
                            > > >
                            > > > If you run wired mode (wire between the console and the remote
                            > > thermo
                            > > > unit), your weather data can be updated every 10 seconds or so.
                            > In
                            > > > this case, you would probably want to run WUHU in direct serial
                            > > > communications mode. If you are running wireless mode (no wire
                            > > > between the console and remote thermo unit), your weather data
                            > will
                            > > > only be updated once per minute regardless of the software
                            > > > combination you choose.
                            > > >
                            > > > When you run WUHU in direct serial mode, you must terminate the
                            > > > Heavyweather application. When you choose this method, you must
                            > hit
                            > > > Stop on WUHU so you can make changes to the settings. In the
                            > > general
                            > > > settings, there is a pulldown combo box. You can select "WS-
                            23XX
                            > > > Direct Serial Access", then to the right of the combo box,
                            select
                            > > the
                            > > > communications port that the console is hooked up to. Once the
                            > > > changes are made, you hit start. WUHU will then manage the
                            > > > communications with the console.
                            > > >
                            > > > If you have a WS-36XX type station, WUHU does not support
                            direct
                            > > > serial communications at this time so you must run the
                            > Heavyweather
                            > > > Pro application. Like Heavyweather Beta 2.0, this application
                            > will
                            > > > write to the currdat.lst file once per minute. As with the
                            first
                            > > > method, Heavyweather Pro and WUHU must be running at all times.
                            > > >
                            > > > Well, that is the long answer. I hope things are a bit clearer
                            > now.
                            > > >
                            > > >
                            > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > <sun_spot_mom@> wrote:
                            > > > >
                            > > > > Okay!! That worked...and interestingly IE7 still works,
                            > although
                            > > > it
                            > > > > seems slower.
                            > > > > So, now I have it installed, not sure if it's getting the
                            > > readings,
                            > > > > tho. My gauges don't show anything. I did turn on logging to
                            > > show
                            > > > > uploads and console comm. errors. I'm not seeing much in
                            there
                            > as
                            > > > > yet.
                            > > > >
                            > > > > Perhaps some tips here would help?
                            > > > >
                            > > > > I will look at more again maybe tomorrow. I am tired after
                            > > > bringing
                            > > > > in the new year.
                            > > > >
                            > > > > Happy New Year!
                            > > > > Thanks for your help.
                            > > > > Kathy
                            > > > >
                            > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                            > > Bradford
                            > > > > >>>>>" <dbradford@> wrote:
                            > > > > >
                            > > > > > I had this problem a few days ago with windows 2000, I had
                            a
                            > > > > printer
                            > > > > > installed and everytime i started WUHU it said I needed a
                            > > > printer,
                            > > > > what I
                            > > > > > did was deleted the printer, rebooted and reinstalled the
                            > > printer
                            > > > > again and
                            > > > > > the reinstalled WUHU and it has not acted up since.
                            > > > > >
                            > > > > > Dickie
                            > > > > >
                            > > > > > -----Original Message-----
                            > > > > > From: wuhu_software_group@yahoogroups.com
                            > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                            > > > > sun_spot_mom
                            > > > > > Sent: Monday, January 01, 2007 8:04 PM
                            > > > > > To: wuhu_software_group@yahoogroups.com
                            > > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                            > > > > >
                            > > > > >
                            > > > > > It could all be IE7 related...
                            > > > > > When I said to go ahead and install IE7, I had problems
                            > > > > connecting.
                            > > > > > I went through all services and stuff in startup and it
                            > > > appeared
                            > > > > that
                            > > > > > my camera & printer services interfere with IE7, so I
                            > stopped
                            > > > them
                            > > > > > from loading. I will try loading them and restarting and
                            > then
                            > > > try
                            > > > > > the install again.
                            > > > > >
                            > > > > > I also did not see version 213 anywhere. I only tried 212
                            &
                            > > 214.
                            > > > > > Where is 213?
                            > > > > >
                            > > > > > Thanks
                            > > > > >
                            > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                            > <yahoo@>
                            > > > > wrote:
                            > > > > > >
                            > > > > > > I was getting the same error when WUHU would try to
                            load
                            > at
                            > > > > Windows
                            > > > > > > startup. Never really got it resolved (thought I did,
                            but
                            > it
                            > > > > > > returned). I figured it was just my machine. I do have
                            a
                            > > > printer
                            > > > > > > installed...I wonder if my printer wasn't loading at
                            > > startup
                            > > > > prior
                            > > > > > > to WUHU, therefore it was not recognizing it? I was
                            using
                            > > > > version
                            > > > > > > 214.
                            > > > > > >
                            > > > > > > I actually decided to try uninstalling 214 and trying
                            > 213.
                            > > The
                            > > > > > > problem seemed to go away. My other problem (serial
                            port
                            > > > issue
                            > > > > with
                            > > > > > > console stopping communication with computer and serial
                            > port
                            > > > > > > indicating it was in use) seemed to go away when I went
                            > > back
                            > > > to
                            > > > > > 213.
                            > > > > > > Can't say for sure though. I will say it has been
                            almost
                            > a
                            > > > day
                            > > > > now
                            > > > > > > without the problems and the problems did seem to start
                            > > when I
                            > > > > > > installed V214.
                            > > > > > >
                            > > > > > >
                            > > > > > >
                            > > > > > > --- In
                            > wuhu_software_group@yahoogroups.com, "wuhu_software"
                            > > > > > > <wuhu_software@> wrote:
                            > > > > > > >
                            > > > > > > >
                            > > > > > > > You must have a printer defined on the machine to
                            > install
                            > > > > WUHU.
                            > > > > > > >
                            > > > > > > > Go to your control panel, click printers.
                            > > > > > > >
                            > > > > > > > If you do not have one defined, add printer.
                            > > > > > > >
                            > > > > > > >
                            > > > > > > > --- In
                            > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                            > > > > > > > <sun_spot_mom@> wrote:
                            > > > > > > > >
                            > > > > > > > > Please help.
                            > > > > > > > >
                            > > > > > > > > When I run install.exe I am getting:
                            > > > > > > > > error
                            > > > > > > > > Runtime error 217 at 00021AEE
                            > > > > > > > >
                            > > > > > > > > Then:
                            > > > > > > > > WUHU setup
                            > > > > > > > > An error occurred during the move data process: -119
                            > > > > > > > >
                            > > > > > > > > Component: DLLs
                            > > > > > > > > File group: program DLLs
                            > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                            > > > > > > > >
                            > > > > > > > > I have tried both versions of the download files:
                            the
                            > > 212
                            > > > &
                            > > > > 214
                            > > > > > > > > versions and I get the same messages.
                            > > > > > > > >
                            > > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                            > > > > wunderground.
                            > > > > > > > >
                            > > > > > > > > I have IE7, is that a problem?
                            > > > > > > > >
                            > > > > > > > > Thanks in advance.
                            > > > > > > > > Kathy
                            > > > > > > > >
                            > > > > > > >
                            > > > > > >
                            > > > > >
                            > > > >
                            > > >
                            > >
                            >
                          • wuhu_software
                            Kathy, What is your WU Station ID? Tried looking it up by zipcode, did not see yours in there. There was another WUHU station but it has been uploading for
                            Message 13 of 26 , Jan 2, 2007
                            • 0 Attachment
                              Kathy,

                              What is your WU Station ID?

                              Tried looking it up by zipcode, did not see yours in there.

                              There was another WUHU station but it has been uploading for some
                              time.


                              --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              <sun_spot_mom@...> wrote:
                              >
                              > Yes, I logged in and saw my data. Do I have to wait a day to see
                              it
                              > when I type in my zipcode?
                              >
                              > Thanks much.
                              > :>)
                              > Kathy
                              >
                              > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > <wuhu_software@> wrote:
                              > >
                              > >
                              > > Kathy,
                              > >
                              > > Sounds like you are almost there...
                              > >
                              > > Go to the Weather Underground site and log in with your WU email
                              > and
                              > > password.
                              > >
                              > > Once you are logged in, there is a "My Stations" link. Click it.
                              > >
                              > > On the next page you will see something like:
                              > >
                              > > Current Stations
                              > > ID: KMI????? | data
                              > >
                              > > Your station id follows ID:
                              > >
                              > > The password entered in to WUHU is the same as you use for your
                              > > normal WU account. It *is* case sensitive.
                              > >
                              > >
                              > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > <sun_spot_mom@> wrote:
                              > > >
                              > > > I do believe that it will work now (except for a minor problem,
                              I
                              > > > don't think I know my ID, duh). Where do I locate my PWS ID?
                              I've
                              > > > been looking at the member settings and do not see it. I think
                              > its
                              > > > KIL something... I was using my "handle" for the ID.
                              > > >
                              > > > My gauges are showing activity. I just need to see it upload.
                              > > > The problem was during the install of wuhu I chose to install
                              in
                              > > > d:\ . Since it asked I thought it would be okay to put it
                              > there.
                              > > >
                              > > > Check out the weather for 60964 coming soon!
                              > > >
                              > > > Thanks again.
                              > > > Kathy
                              > > >
                              > > >
                              > > >
                              > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > <wuhu_software@> wrote:
                              > > > >
                              > > > > Kathy,
                              > > > >
                              > > > > I am not sure which console you have but the next few
                              > paragraphs
                              > > > > assume you are using a WS-23XX type station.
                              > > > >
                              > > > > There are a couple of methods you can use to have WUHU
                              > intercept
                              > > > data
                              > > > > from the console.
                              > > > >
                              > > > > The first is quite easy. You run Heavyweather Beta 2.0 (newer
                              > > than
                              > > > > the version that ships on CD), you run WUHU, it monitors a
                              file
                              > > > > called currdat.lst (stored in C:\Heavyweather). Heavweather
                              and
                              > > > WUHU
                              > > > > must be run at all times otherwise WUHU will not receive the
                              > > > > currdat.lst file updates. That method is fine if you insist
                              on
                              > > > > running Heavyweather. Personally, I think Heavyweather is a
                              CPU
                              > > hog
                              > > > > (can easily chew up 20-30% of your processor even when idle)
                              so
                              > I
                              > > > do
                              > > > > not run it.
                              > > > >
                              > > > > If you run wired mode (wire between the console and the
                              remote
                              > > > thermo
                              > > > > unit), your weather data can be updated every 10 seconds or
                              so.
                              > > In
                              > > > > this case, you would probably want to run WUHU in direct
                              serial
                              > > > > communications mode. If you are running wireless mode (no
                              wire
                              > > > > between the console and remote thermo unit), your weather
                              data
                              > > will
                              > > > > only be updated once per minute regardless of the software
                              > > > > combination you choose.
                              > > > >
                              > > > > When you run WUHU in direct serial mode, you must terminate
                              the
                              > > > > Heavyweather application. When you choose this method, you
                              must
                              > > hit
                              > > > > Stop on WUHU so you can make changes to the settings. In the
                              > > > general
                              > > > > settings, there is a pulldown combo box. You can select "WS-
                              > 23XX
                              > > > > Direct Serial Access", then to the right of the combo box,
                              > select
                              > > > the
                              > > > > communications port that the console is hooked up to. Once
                              the
                              > > > > changes are made, you hit start. WUHU will then manage the
                              > > > > communications with the console.
                              > > > >
                              > > > > If you have a WS-36XX type station, WUHU does not support
                              > direct
                              > > > > serial communications at this time so you must run the
                              > > Heavyweather
                              > > > > Pro application. Like Heavyweather Beta 2.0, this application
                              > > will
                              > > > > write to the currdat.lst file once per minute. As with the
                              > first
                              > > > > method, Heavyweather Pro and WUHU must be running at all
                              times.
                              > > > >
                              > > > > Well, that is the long answer. I hope things are a bit
                              clearer
                              > > now.
                              > > > >
                              > > > >
                              > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > > <sun_spot_mom@> wrote:
                              > > > > >
                              > > > > > Okay!! That worked...and interestingly IE7 still works,
                              > > although
                              > > > > it
                              > > > > > seems slower.
                              > > > > > So, now I have it installed, not sure if it's getting the
                              > > > readings,
                              > > > > > tho. My gauges don't show anything. I did turn on logging
                              to
                              > > > show
                              > > > > > uploads and console comm. errors. I'm not seeing much in
                              > there
                              > > as
                              > > > > > yet.
                              > > > > >
                              > > > > > Perhaps some tips here would help?
                              > > > > >
                              > > > > > I will look at more again maybe tomorrow. I am tired after
                              > > > > bringing
                              > > > > > in the new year.
                              > > > > >
                              > > > > > Happy New Year!
                              > > > > > Thanks for your help.
                              > > > > > Kathy
                              > > > > >
                              > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<< Dickie
                              > > > Bradford
                              > > > > > >>>>>" <dbradford@> wrote:
                              > > > > > >
                              > > > > > > I had this problem a few days ago with windows 2000, I
                              had
                              > a
                              > > > > > printer
                              > > > > > > installed and everytime i started WUHU it said I needed
                              a
                              > > > > printer,
                              > > > > > what I
                              > > > > > > did was deleted the printer, rebooted and reinstalled the
                              > > > printer
                              > > > > > again and
                              > > > > > > the reinstalled WUHU and it has not acted up since.
                              > > > > > >
                              > > > > > > Dickie
                              > > > > > >
                              > > > > > > -----Original Message-----
                              > > > > > > From: wuhu_software_group@yahoogroups.com
                              > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf Of
                              > > > > > sun_spot_mom
                              > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                              > > > > > > To: wuhu_software_group@yahoogroups.com
                              > > > > > > Subject: [wuhu_software_group] Re: Error installing wuhu
                              > > > > > >
                              > > > > > >
                              > > > > > > It could all be IE7 related...
                              > > > > > > When I said to go ahead and install IE7, I had problems
                              > > > > > connecting.
                              > > > > > > I went through all services and stuff in startup and it
                              > > > > appeared
                              > > > > > that
                              > > > > > > my camera & printer services interfere with IE7, so I
                              > > stopped
                              > > > > them
                              > > > > > > from loading. I will try loading them and restarting
                              and
                              > > then
                              > > > > try
                              > > > > > > the install again.
                              > > > > > >
                              > > > > > > I also did not see version 213 anywhere. I only tried
                              212
                              > &
                              > > > 214.
                              > > > > > > Where is 213?
                              > > > > > >
                              > > > > > > Thanks
                              > > > > > >
                              > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                              > > <yahoo@>
                              > > > > > wrote:
                              > > > > > > >
                              > > > > > > > I was getting the same error when WUHU would try to
                              > load
                              > > at
                              > > > > > Windows
                              > > > > > > > startup. Never really got it resolved (thought I did,
                              > but
                              > > it
                              > > > > > > > returned). I figured it was just my machine. I do
                              have
                              > a
                              > > > > printer
                              > > > > > > > installed...I wonder if my printer wasn't loading at
                              > > > startup
                              > > > > > prior
                              > > > > > > > to WUHU, therefore it was not recognizing it? I was
                              > using
                              > > > > > version
                              > > > > > > > 214.
                              > > > > > > >
                              > > > > > > > I actually decided to try uninstalling 214 and trying
                              > > 213.
                              > > > The
                              > > > > > > > problem seemed to go away. My other problem (serial
                              > port
                              > > > > issue
                              > > > > > with
                              > > > > > > > console stopping communication with computer and
                              serial
                              > > port
                              > > > > > > > indicating it was in use) seemed to go away when I
                              went
                              > > > back
                              > > > > to
                              > > > > > > 213.
                              > > > > > > > Can't say for sure though. I will say it has been
                              > almost
                              > > a
                              > > > > day
                              > > > > > now
                              > > > > > > > without the problems and the problems did seem to
                              start
                              > > > when I
                              > > > > > > > installed V214.
                              > > > > > > >
                              > > > > > > >
                              > > > > > > >
                              > > > > > > > --- In
                              > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                              > > > > > > > <wuhu_software@> wrote:
                              > > > > > > > >
                              > > > > > > > >
                              > > > > > > > > You must have a printer defined on the machine to
                              > > install
                              > > > > > WUHU.
                              > > > > > > > >
                              > > > > > > > > Go to your control panel, click printers.
                              > > > > > > > >
                              > > > > > > > > If you do not have one defined, add printer.
                              > > > > > > > >
                              > > > > > > > >
                              > > > > > > > > --- In
                              > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                              > > > > > > > > <sun_spot_mom@> wrote:
                              > > > > > > > > >
                              > > > > > > > > > Please help.
                              > > > > > > > > >
                              > > > > > > > > > When I run install.exe I am getting:
                              > > > > > > > > > error
                              > > > > > > > > > Runtime error 217 at 00021AEE
                              > > > > > > > > >
                              > > > > > > > > > Then:
                              > > > > > > > > > WUHU setup
                              > > > > > > > > > An error occurred during the move data process: -
                              119
                              > > > > > > > > >
                              > > > > > > > > > Component: DLLs
                              > > > > > > > > > File group: program DLLs
                              > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                              > > > > > > > > >
                              > > > > > > > > > I have tried both versions of the download files:
                              > the
                              > > > 212
                              > > > > &
                              > > > > > 214
                              > > > > > > > > > versions and I get the same messages.
                              > > > > > > > > >
                              > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload to
                              > > > > > wunderground.
                              > > > > > > > > >
                              > > > > > > > > > I have IE7, is that a problem?
                              > > > > > > > > >
                              > > > > > > > > > Thanks in advance.
                              > > > > > > > > > Kathy
                              > > > > > > > > >
                              > > > > > > > >
                              > > > > > > >
                              > > > > > >
                              > > > > >
                              > > > >
                              > > >
                              > >
                              >
                            • sun_spot_mom
                              I am KILSAINT2. Thanks for checking. I guess I am supposed to be able to look it up by zipcode, right? Thanks Kathy ... see ... email ... it. ... your ...
                              Message 14 of 26 , Jan 3, 2007
                              • 0 Attachment
                                I am KILSAINT2.

                                Thanks for checking. I guess I am supposed to be able to look it up
                                by zipcode, right?

                                Thanks
                                Kathy

                                --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                <wuhu_software@...> wrote:
                                >
                                >
                                > Kathy,
                                >
                                > What is your WU Station ID?
                                >
                                > Tried looking it up by zipcode, did not see yours in there.
                                >
                                > There was another WUHU station but it has been uploading for some
                                > time.
                                >
                                >
                                > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > <sun_spot_mom@> wrote:
                                > >
                                > > Yes, I logged in and saw my data. Do I have to wait a day to
                                see
                                > it
                                > > when I type in my zipcode?
                                > >
                                > > Thanks much.
                                > > :>)
                                > > Kathy
                                > >
                                > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > <wuhu_software@> wrote:
                                > > >
                                > > >
                                > > > Kathy,
                                > > >
                                > > > Sounds like you are almost there...
                                > > >
                                > > > Go to the Weather Underground site and log in with your WU
                                email
                                > > and
                                > > > password.
                                > > >
                                > > > Once you are logged in, there is a "My Stations" link. Click
                                it.
                                > > >
                                > > > On the next page you will see something like:
                                > > >
                                > > > Current Stations
                                > > > ID: KMI????? | data
                                > > >
                                > > > Your station id follows ID:
                                > > >
                                > > > The password entered in to WUHU is the same as you use for
                                your
                                > > > normal WU account. It *is* case sensitive.
                                > > >
                                > > >
                                > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > <sun_spot_mom@> wrote:
                                > > > >
                                > > > > I do believe that it will work now (except for a minor
                                problem,
                                > I
                                > > > > don't think I know my ID, duh). Where do I locate my PWS ID?
                                > I've
                                > > > > been looking at the member settings and do not see it. I
                                think
                                > > its
                                > > > > KIL something... I was using my "handle" for the ID.
                                > > > >
                                > > > > My gauges are showing activity. I just need to see it
                                upload.
                                > > > > The problem was during the install of wuhu I chose to
                                install
                                > in
                                > > > > d:\ . Since it asked I thought it would be okay to put it
                                > > there.
                                > > > >
                                > > > > Check out the weather for 60964 coming soon!
                                > > > >
                                > > > > Thanks again.
                                > > > > Kathy
                                > > > >
                                > > > >
                                > > > >
                                > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > <wuhu_software@> wrote:
                                > > > > >
                                > > > > > Kathy,
                                > > > > >
                                > > > > > I am not sure which console you have but the next few
                                > > paragraphs
                                > > > > > assume you are using a WS-23XX type station.
                                > > > > >
                                > > > > > There are a couple of methods you can use to have WUHU
                                > > intercept
                                > > > > data
                                > > > > > from the console.
                                > > > > >
                                > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                (newer
                                > > > than
                                > > > > > the version that ships on CD), you run WUHU, it monitors a
                                > file
                                > > > > > called currdat.lst (stored in C:\Heavyweather).
                                Heavweather
                                > and
                                > > > > WUHU
                                > > > > > must be run at all times otherwise WUHU will not receive
                                the
                                > > > > > currdat.lst file updates. That method is fine if you
                                insist
                                > on
                                > > > > > running Heavyweather. Personally, I think Heavyweather is
                                a
                                > CPU
                                > > > hog
                                > > > > > (can easily chew up 20-30% of your processor even when
                                idle)
                                > so
                                > > I
                                > > > > do
                                > > > > > not run it.
                                > > > > >
                                > > > > > If you run wired mode (wire between the console and the
                                > remote
                                > > > > thermo
                                > > > > > unit), your weather data can be updated every 10 seconds
                                or
                                > so.
                                > > > In
                                > > > > > this case, you would probably want to run WUHU in direct
                                > serial
                                > > > > > communications mode. If you are running wireless mode (no
                                > wire
                                > > > > > between the console and remote thermo unit), your weather
                                > data
                                > > > will
                                > > > > > only be updated once per minute regardless of the software
                                > > > > > combination you choose.
                                > > > > >
                                > > > > > When you run WUHU in direct serial mode, you must
                                terminate
                                > the
                                > > > > > Heavyweather application. When you choose this method, you
                                > must
                                > > > hit
                                > > > > > Stop on WUHU so you can make changes to the settings. In
                                the
                                > > > > general
                                > > > > > settings, there is a pulldown combo box. You can
                                select "WS-
                                > > 23XX
                                > > > > > Direct Serial Access", then to the right of the combo box,
                                > > select
                                > > > > the
                                > > > > > communications port that the console is hooked up to. Once
                                > the
                                > > > > > changes are made, you hit start. WUHU will then manage the
                                > > > > > communications with the console.
                                > > > > >
                                > > > > > If you have a WS-36XX type station, WUHU does not support
                                > > direct
                                > > > > > serial communications at this time so you must run the
                                > > > Heavyweather
                                > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                application
                                > > > will
                                > > > > > write to the currdat.lst file once per minute. As with the
                                > > first
                                > > > > > method, Heavyweather Pro and WUHU must be running at all
                                > times.
                                > > > > >
                                > > > > > Well, that is the long answer. I hope things are a bit
                                > clearer
                                > > > now.
                                > > > > >
                                > > > > >
                                > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > <sun_spot_mom@> wrote:
                                > > > > > >
                                > > > > > > Okay!! That worked...and interestingly IE7 still works,
                                > > > although
                                > > > > > it
                                > > > > > > seems slower.
                                > > > > > > So, now I have it installed, not sure if it's getting
                                the
                                > > > > readings,
                                > > > > > > tho. My gauges don't show anything. I did turn on
                                logging
                                > to
                                > > > > show
                                > > > > > > uploads and console comm. errors. I'm not seeing much in
                                > > there
                                > > > as
                                > > > > > > yet.
                                > > > > > >
                                > > > > > > Perhaps some tips here would help?
                                > > > > > >
                                > > > > > > I will look at more again maybe tomorrow. I am tired
                                after
                                > > > > > bringing
                                > > > > > > in the new year.
                                > > > > > >
                                > > > > > > Happy New Year!
                                > > > > > > Thanks for your help.
                                > > > > > > Kathy
                                > > > > > >
                                > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                                Dickie
                                > > > > Bradford
                                > > > > > > >>>>>" <dbradford@> wrote:
                                > > > > > > >
                                > > > > > > > I had this problem a few days ago with windows 2000,
                                I
                                > had
                                > > a
                                > > > > > > printer
                                > > > > > > > installed and everytime i started WUHU it said I
                                needed
                                > a
                                > > > > > printer,
                                > > > > > > what I
                                > > > > > > > did was deleted the printer, rebooted and reinstalled
                                the
                                > > > > printer
                                > > > > > > again and
                                > > > > > > > the reinstalled WUHU and it has not acted up since.
                                > > > > > > >
                                > > > > > > > Dickie
                                > > > > > > >
                                > > > > > > > -----Original Message-----
                                > > > > > > > From: wuhu_software_group@yahoogroups.com
                                > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf
                                Of
                                > > > > > > sun_spot_mom
                                > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                > > > > > > > To: wuhu_software_group@yahoogroups.com
                                > > > > > > > Subject: [wuhu_software_group] Re: Error installing
                                wuhu
                                > > > > > > >
                                > > > > > > >
                                > > > > > > > It could all be IE7 related...
                                > > > > > > > When I said to go ahead and install IE7, I had
                                problems
                                > > > > > > connecting.
                                > > > > > > > I went through all services and stuff in startup and
                                it
                                > > > > > appeared
                                > > > > > > that
                                > > > > > > > my camera & printer services interfere with IE7, so
                                I
                                > > > stopped
                                > > > > > them
                                > > > > > > > from loading. I will try loading them and restarting
                                > and
                                > > > then
                                > > > > > try
                                > > > > > > > the install again.
                                > > > > > > >
                                > > > > > > > I also did not see version 213 anywhere. I only
                                tried
                                > 212
                                > > &
                                > > > > 214.
                                > > > > > > > Where is 213?
                                > > > > > > >
                                > > > > > > > Thanks
                                > > > > > > >
                                > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                                > > > <yahoo@>
                                > > > > > > wrote:
                                > > > > > > > >
                                > > > > > > > > I was getting the same error when WUHU would try
                                to
                                > > load
                                > > > at
                                > > > > > > Windows
                                > > > > > > > > startup. Never really got it resolved (thought I
                                did,
                                > > but
                                > > > it
                                > > > > > > > > returned). I figured it was just my machine. I do
                                > have
                                > > a
                                > > > > > printer
                                > > > > > > > > installed...I wonder if my printer wasn't loading
                                at
                                > > > > startup
                                > > > > > > prior
                                > > > > > > > > to WUHU, therefore it was not recognizing it? I
                                was
                                > > using
                                > > > > > > version
                                > > > > > > > > 214.
                                > > > > > > > >
                                > > > > > > > > I actually decided to try uninstalling 214 and
                                trying
                                > > > 213.
                                > > > > The
                                > > > > > > > > problem seemed to go away. My other problem
                                (serial
                                > > port
                                > > > > > issue
                                > > > > > > with
                                > > > > > > > > console stopping communication with computer and
                                > serial
                                > > > port
                                > > > > > > > > indicating it was in use) seemed to go away when I
                                > went
                                > > > > back
                                > > > > > to
                                > > > > > > > 213.
                                > > > > > > > > Can't say for sure though. I will say it has been
                                > > almost
                                > > > a
                                > > > > > day
                                > > > > > > now
                                > > > > > > > > without the problems and the problems did seem to
                                > start
                                > > > > when I
                                > > > > > > > > installed V214.
                                > > > > > > > >
                                > > > > > > > >
                                > > > > > > > >
                                > > > > > > > > --- In
                                > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                > > > > > > > > <wuhu_software@> wrote:
                                > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > > > You must have a printer defined on the machine
                                to
                                > > > install
                                > > > > > > WUHU.
                                > > > > > > > > >
                                > > > > > > > > > Go to your control panel, click printers.
                                > > > > > > > > >
                                > > > > > > > > > If you do not have one defined, add printer.
                                > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > > > --- In
                                > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                > > > > > > > > > <sun_spot_mom@> wrote:
                                > > > > > > > > > >
                                > > > > > > > > > > Please help.
                                > > > > > > > > > >
                                > > > > > > > > > > When I run install.exe I am getting:
                                > > > > > > > > > > error
                                > > > > > > > > > > Runtime error 217 at 00021AEE
                                > > > > > > > > > >
                                > > > > > > > > > > Then:
                                > > > > > > > > > > WUHU setup
                                > > > > > > > > > > An error occurred during the move data
                                process: -
                                > 119
                                > > > > > > > > > >
                                > > > > > > > > > > Component: DLLs
                                > > > > > > > > > > File group: program DLLs
                                > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                > > > > > > > > > >
                                > > > > > > > > > > I have tried both versions of the download
                                files:
                                > > the
                                > > > > 212
                                > > > > > &
                                > > > > > > 214
                                > > > > > > > > > > versions and I get the same messages.
                                > > > > > > > > > >
                                > > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload
                                to
                                > > > > > > wunderground.
                                > > > > > > > > > >
                                > > > > > > > > > > I have IE7, is that a problem?
                                > > > > > > > > > >
                                > > > > > > > > > > Thanks in advance.
                                > > > > > > > > > > Kathy
                                > > > > > > > > > >
                                > > > > > > > > >
                                > > > > > > > >
                                > > > > > > >
                                > > > > > >
                                > > > > >
                                > > > >
                                > > >
                                > >
                                >
                              • wuhu_software
                                Kathy, I can see your data but you are right, it is not coming up when zip code is listed. I would check under the My Stations link at the Weather
                                Message 15 of 26 , Jan 3, 2007
                                • 0 Attachment
                                  Kathy,

                                  I can see your data but you are right, it is not coming up when zip
                                  code is listed.

                                  I would check under the 'My Stations' link at the Weather Underground
                                  page and verify that your zip code, city and state are entered
                                  correctly there.

                                  If everything is entered correctly and the it does not show up by
                                  tomorrow, we will need to contact Weather Underground to resolve it.


                                  --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  <sun_spot_mom@...> wrote:
                                  >
                                  > I am KILSAINT2.
                                  >
                                  > Thanks for checking. I guess I am supposed to be able to look it
                                  up
                                  > by zipcode, right?
                                  >
                                  > Thanks
                                  > Kathy
                                  >
                                  > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > <wuhu_software@> wrote:
                                  > >
                                  > >
                                  > > Kathy,
                                  > >
                                  > > What is your WU Station ID?
                                  > >
                                  > > Tried looking it up by zipcode, did not see yours in there.
                                  > >
                                  > > There was another WUHU station but it has been uploading for some
                                  > > time.
                                  > >
                                  > >
                                  > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > <sun_spot_mom@> wrote:
                                  > > >
                                  > > > Yes, I logged in and saw my data. Do I have to wait a day to
                                  > see
                                  > > it
                                  > > > when I type in my zipcode?
                                  > > >
                                  > > > Thanks much.
                                  > > > :>)
                                  > > > Kathy
                                  > > >
                                  > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > <wuhu_software@> wrote:
                                  > > > >
                                  > > > >
                                  > > > > Kathy,
                                  > > > >
                                  > > > > Sounds like you are almost there...
                                  > > > >
                                  > > > > Go to the Weather Underground site and log in with your WU
                                  > email
                                  > > > and
                                  > > > > password.
                                  > > > >
                                  > > > > Once you are logged in, there is a "My Stations" link. Click
                                  > it.
                                  > > > >
                                  > > > > On the next page you will see something like:
                                  > > > >
                                  > > > > Current Stations
                                  > > > > ID: KMI????? | data
                                  > > > >
                                  > > > > Your station id follows ID:
                                  > > > >
                                  > > > > The password entered in to WUHU is the same as you use for
                                  > your
                                  > > > > normal WU account. It *is* case sensitive.
                                  > > > >
                                  > > > >
                                  > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > <sun_spot_mom@> wrote:
                                  > > > > >
                                  > > > > > I do believe that it will work now (except for a minor
                                  > problem,
                                  > > I
                                  > > > > > don't think I know my ID, duh). Where do I locate my PWS
                                  ID?
                                  > > I've
                                  > > > > > been looking at the member settings and do not see it. I
                                  > think
                                  > > > its
                                  > > > > > KIL something... I was using my "handle" for the ID.
                                  > > > > >
                                  > > > > > My gauges are showing activity. I just need to see it
                                  > upload.
                                  > > > > > The problem was during the install of wuhu I chose to
                                  > install
                                  > > in
                                  > > > > > d:\ . Since it asked I thought it would be okay to put it
                                  > > > there.
                                  > > > > >
                                  > > > > > Check out the weather for 60964 coming soon!
                                  > > > > >
                                  > > > > > Thanks again.
                                  > > > > > Kathy
                                  > > > > >
                                  > > > > >
                                  > > > > >
                                  > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > <wuhu_software@> wrote:
                                  > > > > > >
                                  > > > > > > Kathy,
                                  > > > > > >
                                  > > > > > > I am not sure which console you have but the next few
                                  > > > paragraphs
                                  > > > > > > assume you are using a WS-23XX type station.
                                  > > > > > >
                                  > > > > > > There are a couple of methods you can use to have WUHU
                                  > > > intercept
                                  > > > > > data
                                  > > > > > > from the console.
                                  > > > > > >
                                  > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                  > (newer
                                  > > > > than
                                  > > > > > > the version that ships on CD), you run WUHU, it monitors
                                  a
                                  > > file
                                  > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                  > Heavweather
                                  > > and
                                  > > > > > WUHU
                                  > > > > > > must be run at all times otherwise WUHU will not receive
                                  > the
                                  > > > > > > currdat.lst file updates. That method is fine if you
                                  > insist
                                  > > on
                                  > > > > > > running Heavyweather. Personally, I think Heavyweather is
                                  > a
                                  > > CPU
                                  > > > > hog
                                  > > > > > > (can easily chew up 20-30% of your processor even when
                                  > idle)
                                  > > so
                                  > > > I
                                  > > > > > do
                                  > > > > > > not run it.
                                  > > > > > >
                                  > > > > > > If you run wired mode (wire between the console and the
                                  > > remote
                                  > > > > > thermo
                                  > > > > > > unit), your weather data can be updated every 10 seconds
                                  > or
                                  > > so.
                                  > > > > In
                                  > > > > > > this case, you would probably want to run WUHU in direct
                                  > > serial
                                  > > > > > > communications mode. If you are running wireless mode (no
                                  > > wire
                                  > > > > > > between the console and remote thermo unit), your weather
                                  > > data
                                  > > > > will
                                  > > > > > > only be updated once per minute regardless of the
                                  software
                                  > > > > > > combination you choose.
                                  > > > > > >
                                  > > > > > > When you run WUHU in direct serial mode, you must
                                  > terminate
                                  > > the
                                  > > > > > > Heavyweather application. When you choose this method,
                                  you
                                  > > must
                                  > > > > hit
                                  > > > > > > Stop on WUHU so you can make changes to the settings. In
                                  > the
                                  > > > > > general
                                  > > > > > > settings, there is a pulldown combo box. You can
                                  > select "WS-
                                  > > > 23XX
                                  > > > > > > Direct Serial Access", then to the right of the combo
                                  box,
                                  > > > select
                                  > > > > > the
                                  > > > > > > communications port that the console is hooked up to.
                                  Once
                                  > > the
                                  > > > > > > changes are made, you hit start. WUHU will then manage
                                  the
                                  > > > > > > communications with the console.
                                  > > > > > >
                                  > > > > > > If you have a WS-36XX type station, WUHU does not support
                                  > > > direct
                                  > > > > > > serial communications at this time so you must run the
                                  > > > > Heavyweather
                                  > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                  > application
                                  > > > > will
                                  > > > > > > write to the currdat.lst file once per minute. As with
                                  the
                                  > > > first
                                  > > > > > > method, Heavyweather Pro and WUHU must be running at all
                                  > > times.
                                  > > > > > >
                                  > > > > > > Well, that is the long answer. I hope things are a bit
                                  > > clearer
                                  > > > > now.
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > --- In
                                  wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > >
                                  > > > > > > > Okay!! That worked...and interestingly IE7 still
                                  works,
                                  > > > > although
                                  > > > > > > it
                                  > > > > > > > seems slower.
                                  > > > > > > > So, now I have it installed, not sure if it's getting
                                  > the
                                  > > > > > readings,
                                  > > > > > > > tho. My gauges don't show anything. I did turn on
                                  > logging
                                  > > to
                                  > > > > > show
                                  > > > > > > > uploads and console comm. errors. I'm not seeing much
                                  in
                                  > > > there
                                  > > > > as
                                  > > > > > > > yet.
                                  > > > > > > >
                                  > > > > > > > Perhaps some tips here would help?
                                  > > > > > > >
                                  > > > > > > > I will look at more again maybe tomorrow. I am tired
                                  > after
                                  > > > > > > bringing
                                  > > > > > > > in the new year.
                                  > > > > > > >
                                  > > > > > > > Happy New Year!
                                  > > > > > > > Thanks for your help.
                                  > > > > > > > Kathy
                                  > > > > > > >
                                  > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                                  > Dickie
                                  > > > > > Bradford
                                  > > > > > > > >>>>>" <dbradford@> wrote:
                                  > > > > > > > >
                                  > > > > > > > > I had this problem a few days ago with windows 2000,
                                  > I
                                  > > had
                                  > > > a
                                  > > > > > > > printer
                                  > > > > > > > > installed and everytime i started WUHU it said I
                                  > needed
                                  > > a
                                  > > > > > > printer,
                                  > > > > > > > what I
                                  > > > > > > > > did was deleted the printer, rebooted and reinstalled
                                  > the
                                  > > > > > printer
                                  > > > > > > > again and
                                  > > > > > > > > the reinstalled WUHU and it has not acted up since.
                                  > > > > > > > >
                                  > > > > > > > > Dickie
                                  > > > > > > > >
                                  > > > > > > > > -----Original Message-----
                                  > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                  > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On Behalf
                                  > Of
                                  > > > > > > > sun_spot_mom
                                  > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                  > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                  > > > > > > > > Subject: [wuhu_software_group] Re: Error installing
                                  > wuhu
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > It could all be IE7 related...
                                  > > > > > > > > When I said to go ahead and install IE7, I had
                                  > problems
                                  > > > > > > > connecting.
                                  > > > > > > > > I went through all services and stuff in startup
                                  and
                                  > it
                                  > > > > > > appeared
                                  > > > > > > > that
                                  > > > > > > > > my camera & printer services interfere with IE7, so
                                  > I
                                  > > > > stopped
                                  > > > > > > them
                                  > > > > > > > > from loading. I will try loading them and
                                  restarting
                                  > > and
                                  > > > > then
                                  > > > > > > try
                                  > > > > > > > > the install again.
                                  > > > > > > > >
                                  > > > > > > > > I also did not see version 213 anywhere. I only
                                  > tried
                                  > > 212
                                  > > > &
                                  > > > > > 214.
                                  > > > > > > > > Where is 213?
                                  > > > > > > > >
                                  > > > > > > > > Thanks
                                  > > > > > > > >
                                  > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "Brian"
                                  > > > > <yahoo@>
                                  > > > > > > > wrote:
                                  > > > > > > > > >
                                  > > > > > > > > > I was getting the same error when WUHU would try
                                  > to
                                  > > > load
                                  > > > > at
                                  > > > > > > > Windows
                                  > > > > > > > > > startup. Never really got it resolved (thought I
                                  > did,
                                  > > > but
                                  > > > > it
                                  > > > > > > > > > returned). I figured it was just my machine. I do
                                  > > have
                                  > > > a
                                  > > > > > > printer
                                  > > > > > > > > > installed...I wonder if my printer wasn't loading
                                  > at
                                  > > > > > startup
                                  > > > > > > > prior
                                  > > > > > > > > > to WUHU, therefore it was not recognizing it? I
                                  > was
                                  > > > using
                                  > > > > > > > version
                                  > > > > > > > > > 214.
                                  > > > > > > > > >
                                  > > > > > > > > > I actually decided to try uninstalling 214 and
                                  > trying
                                  > > > > 213.
                                  > > > > > The
                                  > > > > > > > > > problem seemed to go away. My other problem
                                  > (serial
                                  > > > port
                                  > > > > > > issue
                                  > > > > > > > with
                                  > > > > > > > > > console stopping communication with computer and
                                  > > serial
                                  > > > > port
                                  > > > > > > > > > indicating it was in use) seemed to go away when
                                  I
                                  > > went
                                  > > > > > back
                                  > > > > > > to
                                  > > > > > > > > 213.
                                  > > > > > > > > > Can't say for sure though. I will say it has been
                                  > > > almost
                                  > > > > a
                                  > > > > > > day
                                  > > > > > > > now
                                  > > > > > > > > > without the problems and the problems did seem to
                                  > > start
                                  > > > > > when I
                                  > > > > > > > > > installed V214.
                                  > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > > > --- In
                                  > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                  > > > > > > > > > <wuhu_software@> wrote:
                                  > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > > > You must have a printer defined on the machine
                                  > to
                                  > > > > install
                                  > > > > > > > WUHU.
                                  > > > > > > > > > >
                                  > > > > > > > > > > Go to your control panel, click printers.
                                  > > > > > > > > > >
                                  > > > > > > > > > > If you do not have one defined, add printer.
                                  > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > > > --- In
                                  > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                  > > > > > > > > > > <sun_spot_mom@> wrote:
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Please help.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > When I run install.exe I am getting:
                                  > > > > > > > > > > > error
                                  > > > > > > > > > > > Runtime error 217 at 00021AEE
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Then:
                                  > > > > > > > > > > > WUHU setup
                                  > > > > > > > > > > > An error occurred during the move data
                                  > process: -
                                  > > 119
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Component: DLLs
                                  > > > > > > > > > > > File group: program DLLs
                                  > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > I have tried both versions of the download
                                  > files:
                                  > > > the
                                  > > > > > 212
                                  > > > > > > &
                                  > > > > > > > 214
                                  > > > > > > > > > > > versions and I get the same messages.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to upload
                                  > to
                                  > > > > > > > wunderground.
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > I have IE7, is that a problem?
                                  > > > > > > > > > > >
                                  > > > > > > > > > > > Thanks in advance.
                                  > > > > > > > > > > > Kathy
                                  > > > > > > > > > > >
                                  > > > > > > > > > >
                                  > > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > >
                                  > > > > > >
                                  > > > > >
                                  > > > >
                                  > > >
                                  > >
                                  >
                                • sun_spot_mom
                                  Okay, I checked and I changed Saint to St. (maybe it likes that better?) How long should it take to show up? Thanks Kathy ... zip ... Underground ... it. ...
                                  Message 16 of 26 , Jan 3, 2007
                                  • 0 Attachment
                                    Okay, I checked and I changed Saint to St. (maybe it likes that
                                    better?) How long should it take to show up?

                                    Thanks
                                    Kathy

                                    --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    <wuhu_software@...> wrote:
                                    >
                                    > Kathy,
                                    >
                                    > I can see your data but you are right, it is not coming up when
                                    zip
                                    > code is listed.
                                    >
                                    > I would check under the 'My Stations' link at the Weather
                                    Underground
                                    > page and verify that your zip code, city and state are entered
                                    > correctly there.
                                    >
                                    > If everything is entered correctly and the it does not show up by
                                    > tomorrow, we will need to contact Weather Underground to resolve
                                    it.
                                    >
                                    >
                                    > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > <sun_spot_mom@> wrote:
                                    > >
                                    > > I am KILSAINT2.
                                    > >
                                    > > Thanks for checking. I guess I am supposed to be able to look
                                    it
                                    > up
                                    > > by zipcode, right?
                                    > >
                                    > > Thanks
                                    > > Kathy
                                    > >
                                    > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > <wuhu_software@> wrote:
                                    > > >
                                    > > >
                                    > > > Kathy,
                                    > > >
                                    > > > What is your WU Station ID?
                                    > > >
                                    > > > Tried looking it up by zipcode, did not see yours in there.
                                    > > >
                                    > > > There was another WUHU station but it has been uploading for
                                    some
                                    > > > time.
                                    > > >
                                    > > >
                                    > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > <sun_spot_mom@> wrote:
                                    > > > >
                                    > > > > Yes, I logged in and saw my data. Do I have to wait a day
                                    to
                                    > > see
                                    > > > it
                                    > > > > when I type in my zipcode?
                                    > > > >
                                    > > > > Thanks much.
                                    > > > > :>)
                                    > > > > Kathy
                                    > > > >
                                    > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > <wuhu_software@> wrote:
                                    > > > > >
                                    > > > > >
                                    > > > > > Kathy,
                                    > > > > >
                                    > > > > > Sounds like you are almost there...
                                    > > > > >
                                    > > > > > Go to the Weather Underground site and log in with your WU
                                    > > email
                                    > > > > and
                                    > > > > > password.
                                    > > > > >
                                    > > > > > Once you are logged in, there is a "My Stations" link.
                                    Click
                                    > > it.
                                    > > > > >
                                    > > > > > On the next page you will see something like:
                                    > > > > >
                                    > > > > > Current Stations
                                    > > > > > ID: KMI????? | data
                                    > > > > >
                                    > > > > > Your station id follows ID:
                                    > > > > >
                                    > > > > > The password entered in to WUHU is the same as you use for
                                    > > your
                                    > > > > > normal WU account. It *is* case sensitive.
                                    > > > > >
                                    > > > > >
                                    > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > <sun_spot_mom@> wrote:
                                    > > > > > >
                                    > > > > > > I do believe that it will work now (except for a minor
                                    > > problem,
                                    > > > I
                                    > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                                    > ID?
                                    > > > I've
                                    > > > > > > been looking at the member settings and do not see it.
                                    I
                                    > > think
                                    > > > > its
                                    > > > > > > KIL something... I was using my "handle" for the ID.
                                    > > > > > >
                                    > > > > > > My gauges are showing activity. I just need to see it
                                    > > upload.
                                    > > > > > > The problem was during the install of wuhu I chose to
                                    > > install
                                    > > > in
                                    > > > > > > d:\ . Since it asked I thought it would be okay to put
                                    it
                                    > > > > there.
                                    > > > > > >
                                    > > > > > > Check out the weather for 60964 coming soon!
                                    > > > > > >
                                    > > > > > > Thanks again.
                                    > > > > > > Kathy
                                    > > > > > >
                                    > > > > > >
                                    > > > > > >
                                    > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > <wuhu_software@> wrote:
                                    > > > > > > >
                                    > > > > > > > Kathy,
                                    > > > > > > >
                                    > > > > > > > I am not sure which console you have but the next few
                                    > > > > paragraphs
                                    > > > > > > > assume you are using a WS-23XX type station.
                                    > > > > > > >
                                    > > > > > > > There are a couple of methods you can use to have WUHU
                                    > > > > intercept
                                    > > > > > > data
                                    > > > > > > > from the console.
                                    > > > > > > >
                                    > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                    > > (newer
                                    > > > > > than
                                    > > > > > > > the version that ships on CD), you run WUHU, it
                                    monitors
                                    > a
                                    > > > file
                                    > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                    > > Heavweather
                                    > > > and
                                    > > > > > > WUHU
                                    > > > > > > > must be run at all times otherwise WUHU will not
                                    receive
                                    > > the
                                    > > > > > > > currdat.lst file updates. That method is fine if you
                                    > > insist
                                    > > > on
                                    > > > > > > > running Heavyweather. Personally, I think Heavyweather
                                    is
                                    > > a
                                    > > > CPU
                                    > > > > > hog
                                    > > > > > > > (can easily chew up 20-30% of your processor even when
                                    > > idle)
                                    > > > so
                                    > > > > I
                                    > > > > > > do
                                    > > > > > > > not run it.
                                    > > > > > > >
                                    > > > > > > > If you run wired mode (wire between the console and
                                    the
                                    > > > remote
                                    > > > > > > thermo
                                    > > > > > > > unit), your weather data can be updated every 10
                                    seconds
                                    > > or
                                    > > > so.
                                    > > > > > In
                                    > > > > > > > this case, you would probably want to run WUHU in
                                    direct
                                    > > > serial
                                    > > > > > > > communications mode. If you are running wireless mode
                                    (no
                                    > > > wire
                                    > > > > > > > between the console and remote thermo unit), your
                                    weather
                                    > > > data
                                    > > > > > will
                                    > > > > > > > only be updated once per minute regardless of the
                                    > software
                                    > > > > > > > combination you choose.
                                    > > > > > > >
                                    > > > > > > > When you run WUHU in direct serial mode, you must
                                    > > terminate
                                    > > > the
                                    > > > > > > > Heavyweather application. When you choose this method,
                                    > you
                                    > > > must
                                    > > > > > hit
                                    > > > > > > > Stop on WUHU so you can make changes to the settings.
                                    In
                                    > > the
                                    > > > > > > general
                                    > > > > > > > settings, there is a pulldown combo box. You can
                                    > > select "WS-
                                    > > > > 23XX
                                    > > > > > > > Direct Serial Access", then to the right of the combo
                                    > box,
                                    > > > > select
                                    > > > > > > the
                                    > > > > > > > communications port that the console is hooked up to.
                                    > Once
                                    > > > the
                                    > > > > > > > changes are made, you hit start. WUHU will then manage
                                    > the
                                    > > > > > > > communications with the console.
                                    > > > > > > >
                                    > > > > > > > If you have a WS-36XX type station, WUHU does not
                                    support
                                    > > > > direct
                                    > > > > > > > serial communications at this time so you must run the
                                    > > > > > Heavyweather
                                    > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                    > > application
                                    > > > > > will
                                    > > > > > > > write to the currdat.lst file once per minute. As with
                                    > the
                                    > > > > first
                                    > > > > > > > method, Heavyweather Pro and WUHU must be running at
                                    all
                                    > > > times.
                                    > > > > > > >
                                    > > > > > > > Well, that is the long answer. I hope things are a bit
                                    > > > clearer
                                    > > > > > now.
                                    > > > > > > >
                                    > > > > > > >
                                    > > > > > > > --- In
                                    > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > >
                                    > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                    > works,
                                    > > > > > although
                                    > > > > > > > it
                                    > > > > > > > > seems slower.
                                    > > > > > > > > So, now I have it installed, not sure if it's
                                    getting
                                    > > the
                                    > > > > > > readings,
                                    > > > > > > > > tho. My gauges don't show anything. I did turn on
                                    > > logging
                                    > > > to
                                    > > > > > > show
                                    > > > > > > > > uploads and console comm. errors. I'm not seeing
                                    much
                                    > in
                                    > > > > there
                                    > > > > > as
                                    > > > > > > > > yet.
                                    > > > > > > > >
                                    > > > > > > > > Perhaps some tips here would help?
                                    > > > > > > > >
                                    > > > > > > > > I will look at more again maybe tomorrow. I am
                                    tired
                                    > > after
                                    > > > > > > > bringing
                                    > > > > > > > > in the new year.
                                    > > > > > > > >
                                    > > > > > > > > Happy New Year!
                                    > > > > > > > > Thanks for your help.
                                    > > > > > > > > Kathy
                                    > > > > > > > >
                                    > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                                    > > Dickie
                                    > > > > > > Bradford
                                    > > > > > > > > >>>>>" <dbradford@> wrote:
                                    > > > > > > > > >
                                    > > > > > > > > > I had this problem a few days ago with windows
                                    2000,
                                    > > I
                                    > > > had
                                    > > > > a
                                    > > > > > > > > printer
                                    > > > > > > > > > installed and everytime i started WUHU it said I
                                    > > needed
                                    > > > a
                                    > > > > > > > printer,
                                    > > > > > > > > what I
                                    > > > > > > > > > did was deleted the printer, rebooted and
                                    reinstalled
                                    > > the
                                    > > > > > > printer
                                    > > > > > > > > again and
                                    > > > > > > > > > the reinstalled WUHU and it has not acted up
                                    since.
                                    > > > > > > > > >
                                    > > > > > > > > > Dickie
                                    > > > > > > > > >
                                    > > > > > > > > > -----Original Message-----
                                    > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                    > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                                    Behalf
                                    > > Of
                                    > > > > > > > > sun_spot_mom
                                    > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                    > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                    > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                    installing
                                    > > wuhu
                                    > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > > > It could all be IE7 related...
                                    > > > > > > > > > When I said to go ahead and install IE7, I had
                                    > > problems
                                    > > > > > > > > connecting.
                                    > > > > > > > > > I went through all services and stuff in startup
                                    > and
                                    > > it
                                    > > > > > > > appeared
                                    > > > > > > > > that
                                    > > > > > > > > > my camera & printer services interfere with IE7,
                                    so
                                    > > I
                                    > > > > > stopped
                                    > > > > > > > them
                                    > > > > > > > > > from loading. I will try loading them and
                                    > restarting
                                    > > > and
                                    > > > > > then
                                    > > > > > > > try
                                    > > > > > > > > > the install again.
                                    > > > > > > > > >
                                    > > > > > > > > > I also did not see version 213 anywhere. I only
                                    > > tried
                                    > > > 212
                                    > > > > &
                                    > > > > > > 214.
                                    > > > > > > > > > Where is 213?
                                    > > > > > > > > >
                                    > > > > > > > > > Thanks
                                    > > > > > > > > >
                                    > > > > > > > > > --- In
                                    wuhu_software_group@yahoogroups.com, "Brian"
                                    > > > > > <yahoo@>
                                    > > > > > > > > wrote:
                                    > > > > > > > > > >
                                    > > > > > > > > > > I was getting the same error when WUHU would
                                    try
                                    > > to
                                    > > > > load
                                    > > > > > at
                                    > > > > > > > > Windows
                                    > > > > > > > > > > startup. Never really got it resolved (thought
                                    I
                                    > > did,
                                    > > > > but
                                    > > > > > it
                                    > > > > > > > > > > returned). I figured it was just my machine. I
                                    do
                                    > > > have
                                    > > > > a
                                    > > > > > > > printer
                                    > > > > > > > > > > installed...I wonder if my printer wasn't
                                    loading
                                    > > at
                                    > > > > > > startup
                                    > > > > > > > > prior
                                    > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                                    I
                                    > > was
                                    > > > > using
                                    > > > > > > > > version
                                    > > > > > > > > > > 214.
                                    > > > > > > > > > >
                                    > > > > > > > > > > I actually decided to try uninstalling 214 and
                                    > > trying
                                    > > > > > 213.
                                    > > > > > > The
                                    > > > > > > > > > > problem seemed to go away. My other problem
                                    > > (serial
                                    > > > > port
                                    > > > > > > > issue
                                    > > > > > > > > with
                                    > > > > > > > > > > console stopping communication with computer
                                    and
                                    > > > serial
                                    > > > > > port
                                    > > > > > > > > > > indicating it was in use) seemed to go away
                                    when
                                    > I
                                    > > > went
                                    > > > > > > back
                                    > > > > > > > to
                                    > > > > > > > > > 213.
                                    > > > > > > > > > > Can't say for sure though. I will say it has
                                    been
                                    > > > > almost
                                    > > > > > a
                                    > > > > > > > day
                                    > > > > > > > > now
                                    > > > > > > > > > > without the problems and the problems did seem
                                    to
                                    > > > start
                                    > > > > > > when I
                                    > > > > > > > > > > installed V214.
                                    > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > > > --- In
                                    > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                    > > > > > > > > > > <wuhu_software@> wrote:
                                    > > > > > > > > > > >
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > You must have a printer defined on the
                                    machine
                                    > > to
                                    > > > > > install
                                    > > > > > > > > WUHU.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > Go to your control panel, click printers.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > If you do not have one defined, add printer.
                                    > > > > > > > > > > >
                                    > > > > > > > > > > >
                                    > > > > > > > > > > > --- In
                                    > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                    > > > > > > > > > > > <sun_spot_mom@> wrote:
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Please help.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > When I run install.exe I am getting:
                                    > > > > > > > > > > > > error
                                    > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Then:
                                    > > > > > > > > > > > > WUHU setup
                                    > > > > > > > > > > > > An error occurred during the move data
                                    > > process: -
                                    > > > 119
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Component: DLLs
                                    > > > > > > > > > > > > File group: program DLLs
                                    > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I have tried both versions of the download
                                    > > files:
                                    > > > > the
                                    > > > > > > 212
                                    > > > > > > > &
                                    > > > > > > > > 214
                                    > > > > > > > > > > > > versions and I get the same messages.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                    upload
                                    > > to
                                    > > > > > > > > wunderground.
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > I have IE7, is that a problem?
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > > > Thanks in advance.
                                    > > > > > > > > > > > > Kathy
                                    > > > > > > > > > > > >
                                    > > > > > > > > > > >
                                    > > > > > > > > > >
                                    > > > > > > > > >
                                    > > > > > > > >
                                    > > > > > > >
                                    > > > > > >
                                    > > > > >
                                    > > > >
                                    > > >
                                    > >
                                    >
                                  • wuhu_software
                                    Kathy, I think I have found the problem. Your latitude and longitude numbers entered in the My Stations page at WU may not be correct. The are actually
                                    Message 17 of 26 , Jan 3, 2007
                                    • 0 Attachment

                                      Kathy,

                                      I think I have found the problem.

                                      Your latitude and longitude numbers entered in the 'My Stations' page at WU may not be correct. The are actually pointing to Dearing, Kansas.

                                      If I pull up the forecast page for Saint Anne, Illinois:

                                      http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Saint+Anne%2C+IL#History

                                      The station is not listed.

                                      I can pull up the station history:

                                      http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=KILSAINT2

                                      When I click the 'View Full Conditions and Forecast' on the history page, I end up here:

                                      http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                      I believe the latitude and longitude entered for the station are not correct.

                                      Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                      Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )

                                      A quick way to get your latitude and longitude is to pull up:

                                      http://terraserver.homeadvisor.msn.com

                                      Enter your street address, city and state. When you git go you can chose either the topo or aerial map. Choose topo.

                                      When the next screen is displayed, the URL at the top will look something like this:

                                      http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700...

                                      Get the numbers that are associated with Alon and ALat

                                      So the data you would need is:

                                      Lat: 42.52875700

                                      Lon: -83.79587400

                                      Once you have the correct numbers, copy and paste them in the 'My Stations' page back at Weather Underground.

                                      ---

                                      To John,

                                      What is interesting to note here is that when you pull up the page:

                                      http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                      There are stations listed from all over the country.

                                      I suspect that there is a default latitude and longitude being loaded in the 'My Stations' new user signup??

                                      ---

                                      --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom" <sun_spot_mom@...> wrote:
                                      >
                                      > Okay, I checked and I changed Saint to St. (maybe it likes that
                                      > better?) How long should it take to show up?
                                      >
                                      > Thanks
                                      > Kathy
                                      >
                                      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > wuhu_software@ wrote:
                                      > >
                                      > > Kathy,
                                      > >
                                      > > I can see your data but you are right, it is not coming up when
                                      > zip
                                      > > code is listed.
                                      > >
                                      > > I would check under the 'My Stations' link at the Weather
                                      > Underground
                                      > > page and verify that your zip code, city and state are entered
                                      > > correctly there.
                                      > >
                                      > > If everything is entered correctly and the it does not show up by
                                      > > tomorrow, we will need to contact Weather Underground to resolve
                                      > it.
                                      > >
                                      > >
                                      > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > <sun_spot_mom@> wrote:
                                      > > >
                                      > > > I am KILSAINT2.
                                      > > >
                                      > > > Thanks for checking. I guess I am supposed to be able to look
                                      > it
                                      > > up
                                      > > > by zipcode, right?
                                      > > >
                                      > > > Thanks
                                      > > > Kathy
                                      > > >
                                      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > <wuhu_software@> wrote:
                                      > > > >
                                      > > > >
                                      > > > > Kathy,
                                      > > > >
                                      > > > > What is your WU Station ID?
                                      > > > >
                                      > > > > Tried looking it up by zipcode, did not see yours in there.
                                      > > > >
                                      > > > > There was another WUHU station but it has been uploading for
                                      > some
                                      > > > > time.
                                      > > > >
                                      > > > >
                                      > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > <sun_spot_mom@> wrote:
                                      > > > > >
                                      > > > > > Yes, I logged in and saw my data. Do I have to wait a day
                                      > to
                                      > > > see
                                      > > > > it
                                      > > > > > when I type in my zipcode?
                                      > > > > >
                                      > > > > > Thanks much.
                                      > > > > > :>)
                                      > > > > > Kathy
                                      > > > > >
                                      > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > <wuhu_software@> wrote:
                                      > > > > > >
                                      > > > > > >
                                      > > > > > > Kathy,
                                      > > > > > >
                                      > > > > > > Sounds like you are almost there...
                                      > > > > > >
                                      > > > > > > Go to the Weather Underground site and log in with your WU
                                      > > > email
                                      > > > > > and
                                      > > > > > > password.
                                      > > > > > >
                                      > > > > > > Once you are logged in, there is a "My Stations" link.
                                      > Click
                                      > > > it.
                                      > > > > > >
                                      > > > > > > On the next page you will see something like:
                                      > > > > > >
                                      > > > > > > Current Stations
                                      > > > > > > ID: KMI????? | data
                                      > > > > > >
                                      > > > > > > Your station id follows ID:
                                      > > > > > >
                                      > > > > > > The password entered in to WUHU is the same as you use for
                                      > > > your
                                      > > > > > > normal WU account. It *is* case sensitive.
                                      > > > > > >
                                      > > > > > >
                                      > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > >
                                      > > > > > > > I do believe that it will work now (except for a minor
                                      > > > problem,
                                      > > > > I
                                      > > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                                      > > ID?
                                      > > > > I've
                                      > > > > > > > been looking at the member settings and do not see it.
                                      > I
                                      > > > think
                                      > > > > > its
                                      > > > > > > > KIL something... I was using my "handle" for the ID.
                                      > > > > > > >
                                      > > > > > > > My gauges are showing activity. I just need to see it
                                      > > > upload.
                                      > > > > > > > The problem was during the install of wuhu I chose to
                                      > > > install
                                      > > > > in
                                      > > > > > > > d:\ . Since it asked I thought it would be okay to put
                                      > it
                                      > > > > > there.
                                      > > > > > > >
                                      > > > > > > > Check out the weather for 60964 coming soon!
                                      > > > > > > >
                                      > > > > > > > Thanks again.
                                      > > > > > > > Kathy
                                      > > > > > > >
                                      > > > > > > >
                                      > > > > > > >
                                      > > > > > > > --- In
                                      > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > > > <wuhu_software@> wrote:
                                      > > > > > > > >
                                      > > > > > > > > Kathy,
                                      > > > > > > > >
                                      > > > > > > > > I am not sure which console you have but the next few
                                      > > > > > paragraphs
                                      > > > > > > > > assume you are using a WS-23XX type station.
                                      > > > > > > > >
                                      > > > > > > > > There are a couple of methods you can use to have WUHU
                                      > > > > > intercept
                                      > > > > > > > data
                                      > > > > > > > > from the console.
                                      > > > > > > > >
                                      > > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                      > > > (newer
                                      > > > > > > than
                                      > > > > > > > > the version that ships on CD), you run WUHU, it
                                      > monitors
                                      > > a
                                      > > > > file
                                      > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                      > > > Heavweather
                                      > > > > and
                                      > > > > > > > WUHU
                                      > > > > > > > > must be run at all times otherwise WUHU will not
                                      > receive
                                      > > > the
                                      > > > > > > > > currdat.lst file updates. That method is fine if you
                                      > > > insist
                                      > > > > on
                                      > > > > > > > > running Heavyweather. Personally, I think Heavyweather
                                      > is
                                      > > > a
                                      > > > > CPU
                                      > > > > > > hog
                                      > > > > > > > > (can easily chew up 20-30% of your processor even when
                                      > > > idle)
                                      > > > > so
                                      > > > > > I
                                      > > > > > > > do
                                      > > > > > > > > not run it.
                                      > > > > > > > >
                                      > > > > > > > > If you run wired mode (wire between the console and
                                      > the
                                      > > > > remote
                                      > > > > > > > thermo
                                      > > > > > > > > unit), your weather data can be updated every 10
                                      > seconds
                                      > > > or
                                      > > > > so.
                                      > > > > > > In
                                      > > > > > > > > this case, you would probably want to run WUHU in
                                      > direct
                                      > > > > serial
                                      > > > > > > > > communications mode. If you are running wireless mode
                                      > (no
                                      > > > > wire
                                      > > > > > > > > between the console and remote thermo unit), your
                                      > weather
                                      > > > > data
                                      > > > > > > will
                                      > > > > > > > > only be updated once per minute regardless of the
                                      > > software
                                      > > > > > > > > combination you choose.
                                      > > > > > > > >
                                      > > > > > > > > When you run WUHU in direct serial mode, you must
                                      > > > terminate
                                      > > > > the
                                      > > > > > > > > Heavyweather application. When you choose this method,
                                      > > you
                                      > > > > must
                                      > > > > > > hit
                                      > > > > > > > > Stop on WUHU so you can make changes to the settings.
                                      > In
                                      > > > the
                                      > > > > > > > general
                                      > > > > > > > > settings, there is a pulldown combo box. You can
                                      > > > select "WS-
                                      > > > > > 23XX
                                      > > > > > > > > Direct Serial Access", then to the right of the combo
                                      > > box,
                                      > > > > > select
                                      > > > > > > > the
                                      > > > > > > > > communications port that the console is hooked up to.
                                      > > Once
                                      > > > > the
                                      > > > > > > > > changes are made, you hit start. WUHU will then manage
                                      > > the
                                      > > > > > > > > communications with the console.
                                      > > > > > > > >
                                      > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                      > support
                                      > > > > > direct
                                      > > > > > > > > serial communications at this time so you must run the
                                      > > > > > > Heavyweather
                                      > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                      > > > application
                                      > > > > > > will
                                      > > > > > > > > write to the currdat.lst file once per minute. As with
                                      > > the
                                      > > > > > first
                                      > > > > > > > > method, Heavyweather Pro and WUHU must be running at
                                      > all
                                      > > > > times.
                                      > > > > > > > >
                                      > > > > > > > > Well, that is the long answer. I hope things are a bit
                                      > > > > clearer
                                      > > > > > > now.
                                      > > > > > > > >
                                      > > > > > > > >
                                      > > > > > > > > --- In
                                      > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > > > >
                                      > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                      > > works,
                                      > > > > > > although
                                      > > > > > > > > it
                                      > > > > > > > > > seems slower.
                                      > > > > > > > > > So, now I have it installed, not sure if it's
                                      > getting
                                      > > > the
                                      > > > > > > > readings,
                                      > > > > > > > > > tho. My gauges don't show anything. I did turn on
                                      > > > logging
                                      > > > > to
                                      > > > > > > > show
                                      > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                      > much
                                      > > in
                                      > > > > > there
                                      > > > > > > as
                                      > > > > > > > > > yet.
                                      > > > > > > > > >
                                      > > > > > > > > > Perhaps some tips here would help?
                                      > > > > > > > > >
                                      > > > > > > > > > I will look at more again maybe tomorrow. I am
                                      > tired
                                      > > > after
                                      > > > > > > > > bringing
                                      > > > > > > > > > in the new year.
                                      > > > > > > > > >
                                      > > > > > > > > > Happy New Year!
                                      > > > > > > > > > Thanks for your help.
                                      > > > > > > > > > Kathy
                                      > > > > > > > > >
                                      > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "<<<<<
                                      > > > Dickie
                                      > > > > > > > Bradford
                                      > > > > > > > > > >>>>>" <dbradford@> wrote:
                                      > > > > > > > > > >
                                      > > > > > > > > > > I had this problem a few days ago with windows
                                      > 2000,
                                      > > > I
                                      > > > > had
                                      > > > > > a
                                      > > > > > > > > > printer
                                      > > > > > > > > > > installed and everytime i started WUHU it said I
                                      > > > needed
                                      > > > > a
                                      > > > > > > > > printer,
                                      > > > > > > > > > what I
                                      > > > > > > > > > > did was deleted the printer, rebooted and
                                      > reinstalled
                                      > > > the
                                      > > > > > > > printer
                                      > > > > > > > > > again and
                                      > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                      > since.
                                      > > > > > > > > > >
                                      > > > > > > > > > > Dickie
                                      > > > > > > > > > >
                                      > > > > > > > > > > -----Original Message-----
                                      > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                      > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                                      > Behalf
                                      > > > Of
                                      > > > > > > > > > sun_spot_mom
                                      > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                      > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                      > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                      > installing
                                      > > > wuhu
                                      > > > > > > > > > >
                                      > > > > > > > > > >
                                      > > > > > > > > > > It could all be IE7 related...
                                      > > > > > > > > > > When I said to go ahead and install IE7, I had
                                      > > > problems
                                      > > > > > > > > > connecting.
                                      > > > > > > > > > > I went through all services and stuff in startup
                                      > > and
                                      > > > it
                                      > > > > > > > > appeared
                                      > > > > > > > > > that
                                      > > > > > > > > > > my camera & printer services interfere with IE7,
                                      > so
                                      > > > I
                                      > > > > > > stopped
                                      > > > > > > > > them
                                      > > > > > > > > > > from loading. I will try loading them and
                                      > > restarting
                                      > > > > and
                                      > > > > > > then
                                      > > > > > > > > try
                                      > > > > > > > > > > the install again.
                                      > > > > > > > > > >
                                      > > > > > > > > > > I also did not see version 213 anywhere. I only
                                      > > > tried
                                      > > > > 212
                                      > > > > > &
                                      > > > > > > > 214.
                                      > > > > > > > > > > Where is 213?
                                      > > > > > > > > > >
                                      > > > > > > > > > > Thanks
                                      > > > > > > > > > >
                                      > > > > > > > > > > --- In
                                      > wuhu_software_group@yahoogroups.com, "Brian"
                                      > > > > > > <yahoo@>
                                      > > > > > > > > > wrote:
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > I was getting the same error when WUHU would
                                      > try
                                      > > > to
                                      > > > > > load
                                      > > > > > > at
                                      > > > > > > > > > Windows
                                      > > > > > > > > > > > startup. Never really got it resolved (thought
                                      > I
                                      > > > did,
                                      > > > > > but
                                      > > > > > > it
                                      > > > > > > > > > > > returned). I figured it was just my machine. I
                                      > do
                                      > > > > have
                                      > > > > > a
                                      > > > > > > > > printer
                                      > > > > > > > > > > > installed...I wonder if my printer wasn't
                                      > loading
                                      > > > at
                                      > > > > > > > startup
                                      > > > > > > > > > prior
                                      > > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                                      > I
                                      > > > was
                                      > > > > > using
                                      > > > > > > > > > version
                                      > > > > > > > > > > > 214.
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > I actually decided to try uninstalling 214 and
                                      > > > trying
                                      > > > > > > 213.
                                      > > > > > > > The
                                      > > > > > > > > > > > problem seemed to go away. My other problem
                                      > > > (serial
                                      > > > > > port
                                      > > > > > > > > issue
                                      > > > > > > > > > with
                                      > > > > > > > > > > > console stopping communication with computer
                                      > and
                                      > > > > serial
                                      > > > > > > port
                                      > > > > > > > > > > > indicating it was in use) seemed to go away
                                      > when
                                      > > I
                                      > > > > went
                                      > > > > > > > back
                                      > > > > > > > > to
                                      > > > > > > > > > > 213.
                                      > > > > > > > > > > > Can't say for sure though. I will say it has
                                      > been
                                      > > > > > almost
                                      > > > > > > a
                                      > > > > > > > > day
                                      > > > > > > > > > now
                                      > > > > > > > > > > > without the problems and the problems did seem
                                      > to
                                      > > > > start
                                      > > > > > > > when I
                                      > > > > > > > > > > > installed V214.
                                      > > > > > > > > > > >
                                      > > > > > > > > > > >
                                      > > > > > > > > > > >
                                      > > > > > > > > > > > --- In
                                      > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                      > > > > > > > > > > > <wuhu_software@> wrote:
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > You must have a printer defined on the
                                      > machine
                                      > > > to
                                      > > > > > > install
                                      > > > > > > > > > WUHU.
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > Go to your control panel, click printers.
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > If you do not have one defined, add printer.
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > > > --- In
                                      > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                      > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > Please help.
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > When I run install.exe I am getting:
                                      > > > > > > > > > > > > > error
                                      > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > Then:
                                      > > > > > > > > > > > > > WUHU setup
                                      > > > > > > > > > > > > > An error occurred during the move data
                                      > > > process: -
                                      > > > > 119
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > Component: DLLs
                                      > > > > > > > > > > > > > File group: program DLLs
                                      > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > I have tried both versions of the download
                                      > > > files:
                                      > > > > > the
                                      > > > > > > > 212
                                      > > > > > > > > &
                                      > > > > > > > > > 214
                                      > > > > > > > > > > > > > versions and I get the same messages.
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                      > upload
                                      > > > to
                                      > > > > > > > > > wunderground.
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > I have IE7, is that a problem?
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > > > Thanks in advance.
                                      > > > > > > > > > > > > > Kathy
                                      > > > > > > > > > > > > >
                                      > > > > > > > > > > > >
                                      > > > > > > > > > > >
                                      > > > > > > > > > >
                                      > > > > > > > > >
                                      > > > > > > > >
                                      > > > > > > >
                                      > > > > > >
                                      > > > > >
                                      > > > >
                                      > > >
                                      > >
                                      >

                                    • John Celenza
                                      Hello :-) Sounds like you re on the right track. You can test which city your station is nearest to by taking the lat and lon from the Weather Station History
                                      Message 18 of 26 , Jan 3, 2007
                                      • 0 Attachment
                                        Hello :-)

                                        Sounds like you're on the right track.

                                        You can test which city your station is nearest to by taking the lat and lon from the Weather Station History page and entering it into the "Fast Forecast" box with "lat,lon".  You have to use the decimal version (the one in parentheses) with no degree symbol like:

                                        37.062,-95.677

                                        When I tried this, I also got Dearing Kansas.

                                        When you change your lat/lon for the station in "My Stations", it will take until tomorrow morning for your station to appear on the correct St. Anne pages.  This is because our databases have to update.

                                        -John

                                        On 1/3/07, wuhu_software <wuhu_software@...> wrote:

                                        Kathy,

                                        I think I have found the problem.

                                        Your latitude and longitude numbers entered in the 'My Stations' page at WU may not be correct. The are actually pointing to Dearing, Kansas.

                                        If I pull up the forecast page for Saint Anne, Illinois:

                                        http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Saint+Anne%2C+IL#History

                                        The station is not listed.

                                        I can pull up the station history:

                                        http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=KILSAINT2

                                        When I click the 'View Full Conditions and Forecast' on the history page, I end up here:

                                        http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                        I believe the latitude and longitude entered for the station are not correct.

                                        Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                        Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )

                                        A quick way to get your latitude and longitude is to pull up:

                                        http://terraserver.homeadvisor.msn.com

                                        Enter your street address, city and state. When you git go you can chose either the topo or aerial map. Choose topo.

                                        When the next screen is displayed, the URL at the top will look something like this:

                                        http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon= -83.79587400&ALat=42.52875700...

                                        Get the numbers that are associated with Alon and ALat

                                        So the data you would need is:

                                        Lat: 42.52875700

                                        Lon: -83.79587400

                                        Once you have the correct numbers, copy and paste them in the 'My Stations' page back at Weather Underground.

                                        ---

                                        To John,

                                        What is interesting to note here is that when you pull up the page:

                                        http://www.wunderground.com/cgi-bin/findweather/getForecast?query=37.062%2C-95.677

                                        There are stations listed from all over the country.

                                        I suspect that there is a default latitude and longitude being loaded in the 'My Stations' new user signup??

                                        ---

                                        --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom" <sun_spot_mom@...> wrote:
                                        >
                                        > Okay, I checked and I changed Saint to St. (maybe it likes that
                                        > better?) How long should it take to show up?
                                        >
                                        > Thanks
                                        > Kathy
                                        >
                                        > --- In wuhu_software_group@yahoogroup s.com, "wuhu_software"
                                        > wuhu_software@ wrote:
                                        > >
                                        > > Kathy,
                                        > >
                                        > > I can see your data but you are right, it is not coming up when
                                        > zip
                                        > > code is listed.
                                        > >
                                        > > I would check under the 'My Stations' link at the Weather
                                        > Underground
                                        > > page and verify that your zip code, city and state are entered
                                        > > correctly there.
                                        > >
                                        > > If everything is entered correctly and the it does not show up by
                                        > > tomorrow, we will need to contact Weather Underground to resolve
                                        > it.
                                        > >
                                        > >
                                        > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > <sun_spot_mom@> wrote:
                                        > > >
                                        > > > I am KILSAINT2.
                                        > > >
                                        > > > Thanks for checking. I guess I am supposed to be able to look
                                        > it
                                        > > up
                                        > > > by zipcode, right?
                                        > > >
                                        > > > Thanks
                                        > > > Kathy
                                        > > >
                                        > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > <wuhu_software@> wrote:
                                        > > > >
                                        > > > >
                                        > > > > Kathy,
                                        > > > >
                                        > > > > What is your WU Station ID?
                                        > > > >
                                        > > > > Tried looking it up by zipcode, did not see yours in there.
                                        > > > >
                                        > > > > There was another WUHU station but it has been uploading for
                                        > some
                                        > > > > time.
                                        > > > >
                                        > > > >
                                        > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                        > > > > <sun_spot_mom@> wrote:
                                        > > > > >
                                        > > > > > Yes, I logged in and saw my data. Do I have to wait a day
                                        > to
                                        > > > see
                                        > > > > it
                                        > > > > > when I type in my zipcode?
                                        > > > > >
                                        > > > > > Thanks much.
                                        > > > > > :>)
                                        > > > > > Kathy
                                        > > > > >
                                        > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                        > > > > > <wuhu_software@> wrote:
                                        > > > > > >
                                        > > > > > >
                                        > > > > > > Kathy,
                                        > > > > > >
                                        > > > > > > Sounds like you are almost there...
                                        > > > > > >
                                        > > > > > > Go to the Weather Underground site and log in with your WU
                                        > > > email
                                        > > > > > and
                                        > > > > > > password.
                                        > > > > > >
                                        > > > > > > Once you are logged in, there is a "My Stations" link.
                                        > Click
                                        > > > it.
                                        > > > > > >
                                        > > > > > > On the next page you will see something like:
                                        > > > > > >
                                        > > > > > > Current Stations
                                        > > > > > > ID: KMI????? | data
                                        > > > > > >
                                        > > > > > > Your station id follows ID:
                                        > > > > > >
                                        > > > > > > The password entered in to WUHU is the same as you use for
                                        > > > your
                                        > > > > > > normal WU account. It *is* case sensitive.
                                        > > > > > >
                                        > > > > > >
                                        > > > > > > --- In wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                                        > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > >
                                        > > > > > > > I do believe that it will work now (except for a minor
                                        > > > problem,
                                        > > > > I
                                        > > > > > > > don't think I know my ID, duh). Where do I locate my PWS
                                        > > ID?
                                        > > > > I've
                                        > > > > > > > been looking at the member settings and do not see it.
                                        > I
                                        > > > think
                                        > > > > > its
                                        > > > > > > > KIL something... I was using my "handle" for the ID.
                                        > > > > > > >
                                        > > > > > > > My gauges are showing activity. I just need to see it
                                        > > > upload.
                                        > > > > > > > The problem was during the install of wuhu I chose to
                                        > > > install
                                        > > > > in
                                        > > > > > > > d:\ . Since it asked I thought it would be okay to put
                                        > it
                                        > > > > > there.
                                        > > > > > > >
                                        > > > > > > > Check out the weather for 60964 coming soon!
                                        > > > > > > >
                                        > > > > > > > Thanks again.
                                        > > > > > > > Kathy
                                        > > > > > > >
                                        > > > > > > >
                                        > > > > > > >
                                        > > > > > > > --- In
                                        > wuhu_software_group@yahoogroup s.com, "wuhu_software"
                                        > > > > > > > <wuhu_software@> wrote:
                                        > > > > > > > >
                                        > > > > > > > > Kathy,
                                        > > > > > > > >
                                        > > > > > > > > I am not sure which console you have but the next few
                                        > > > > > paragraphs
                                        > > > > > > > > assume you are using a WS-23XX type station.
                                        > > > > > > > >
                                        > > > > > > > > There are a couple of methods you can use to have WUHU
                                        > > > > > intercept
                                        > > > > > > > data
                                        > > > > > > > > from the console.
                                        > > > > > > > >
                                        > > > > > > > > The first is quite easy. You run Heavyweather Beta 2.0
                                        > > > (newer
                                        > > > > > > than
                                        > > > > > > > > the version that ships on CD), you run WUHU, it
                                        > monitors
                                        > > a
                                        > > > > file
                                        > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                        > > > Heavweather
                                        > > > > and
                                        > > > > > > > WUHU
                                        > > > > > > > > must be run at all times otherwise WUHU will not
                                        > receive
                                        > > > the
                                        > > > > > > > > currdat.lst file updates. That method is fine if you
                                        > > > insist
                                        > > > > on
                                        > > > > > > > > running Heavyweather. Personally, I think Heavyweather
                                        > is
                                        > > > a
                                        > > > > CPU
                                        > > > > > > hog
                                        > > > > > > > > (can easily chew up 20-30% of your processor even when
                                        > > > idle)
                                        > > > > so
                                        > > > > > I
                                        > > > > > > > do
                                        > > > > > > > > not run it.
                                        > > > > > > > >
                                        > > > > > > > > If you run wired mode (wire between the console and
                                        > the
                                        > > > > remote
                                        > > > > > > > thermo
                                        > > > > > > > > unit), your weather data can be updated every 10
                                        > seconds
                                        > > > or
                                        > > > > so.
                                        > > > > > > In
                                        > > > > > > > > this case, you would probably want to run WUHU in
                                        > direct
                                        > > > > serial
                                        > > > > > > > > communications mode. If you are running wireless mode
                                        > (no
                                        > > > > wire
                                        > > > > > > > > between the console and remote thermo unit), your
                                        > weather
                                        > > > > data
                                        > > > > > > will
                                        > > > > > > > > only be updated once per minute regardless of the
                                        > > software
                                        > > > > > > > > combination you choose.
                                        > > > > > > > >
                                        > > > > > > > > When you run WUHU in direct serial mode, you must
                                        > > > terminate
                                        > > > > the
                                        > > > > > > > > Heavyweather application. When you choose this method,
                                        > > you
                                        > > > > must
                                        > > > > > > hit
                                        > > > > > > > > Stop on WUHU so you can make changes to the settings.
                                        > In
                                        > > > the
                                        > > > > > > > general
                                        > > > > > > > > settings, there is a pulldown combo box. You can
                                        > > > select "WS-
                                        > > > > > 23XX
                                        > > > > > > > > Direct Serial Access", then to the right of the combo
                                        > > box,
                                        > > > > > select
                                        > > > > > > > the
                                        > > > > > > > > communications port that the console is hooked up to.
                                        > > Once
                                        > > > > the
                                        > > > > > > > > changes are made, you hit start. WUHU will then manage
                                        > > the
                                        > > > > > > > > communications with the console.
                                        > > > > > > > >
                                        > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                        > support
                                        > > > > > direct
                                        > > > > > > > > serial communications at this time so you must run the
                                        > > > > > > Heavyweather
                                        > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                        > > > application
                                        > > > > > > will
                                        > > > > > > > > write to the currdat.lst file once per minute. As with
                                        > > the
                                        > > > > > first
                                        > > > > > > > > method, Heavyweather Pro and WUHU must be running at
                                        > all
                                        > > > > times.
                                        > > > > > > > >
                                        > > > > > > > > Well, that is the long answer. I hope things are a bit
                                        > > > > clearer
                                        > > > > > > now.
                                        > > > > > > > >
                                        > > > > > > > >
                                        > > > > > > > > --- In
                                        > > wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                                        > > > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > > > >
                                        > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                        > > works,
                                        > > > > > > although
                                        > > > > > > > > it
                                        > > > > > > > > > seems slower.
                                        > > > > > > > > > So, now I have it installed, not sure if it's
                                        > getting
                                        > > > the
                                        > > > > > > > readings,
                                        > > > > > > > > > tho. My gauges don't show anything. I did turn on
                                        > > > logging
                                        > > > > to
                                        > > > > > > > show
                                        > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                        > much
                                        > > in
                                        > > > > > there
                                        > > > > > > as
                                        > > > > > > > > > yet.
                                        > > > > > > > > >
                                        > > > > > > > > > Perhaps some tips here would help?
                                        > > > > > > > > >
                                        > > > > > > > > > I will look at more again maybe tomorrow. I am
                                        > tired
                                        > > > after
                                        > > > > > > > > bringing
                                        > > > > > > > > > in the new year.
                                        > > > > > > > > >
                                        > > > > > > > > > Happy New Year!
                                        > > > > > > > > > Thanks for your help.
                                        > > > > > > > > > Kathy
                                        > > > > > > > > >
                                        > > > > > > > > > --- In wuhu_software_group@yahoogroup s.com, "<<<<<
                                        > > > Dickie
                                        > > > > > > > Bradford
                                        > > > > > > > > > >>>>>" <dbradford@> wrote:
                                        > > > > > > > > > >
                                        > > > > > > > > > > I had this problem a few days ago with windows
                                        > 2000,
                                        > > > I
                                        > > > > had
                                        > > > > > a
                                        > > > > > > > > > printer
                                        > > > > > > > > > > installed and everytime i started WUHU it said I
                                        > > > needed
                                        > > > > a
                                        > > > > > > > > printer,
                                        > > > > > > > > > what I
                                        > > > > > > > > > > did was deleted the printer, rebooted and
                                        > reinstalled
                                        > > > the
                                        > > > > > > > printer
                                        > > > > > > > > > again and
                                        > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                        > since.
                                        > > > > > > > > > >
                                        > > > > > > > > > > Dickie
                                        > > > > > > > > > >
                                        > > > > > > > > > > -----Original Message-----
                                        > > > > > > > > > > From: wuhu_software_group@yahoogroup s.com
                                        > > > > > > > > > > [mailto: wuhu_software_group@yahoogroups.com]On
                                        > Behalf
                                        > > > Of
                                        > > > > > > > > > sun_spot_mom
                                        > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                        > > > > > > > > > > To: wuhu_software_group@yahoogroup s.com
                                        > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                        > installing
                                        > > > wuhu
                                        > > > > > > > > > >
                                        > > > > > > > > > >
                                        > > > > > > > > > > It could all be IE7 related...
                                        > > > > > > > > > > When I said to go ahead and install IE7, I had
                                        > > > problems
                                        > > > > > > > > > connecting.
                                        > > > > > > > > > > I went through all services and stuff in startup
                                        > > and
                                        > > > it
                                        > > > > > > > > appeared
                                        > > > > > > > > > that
                                        > > > > > > > > > > my camera & printer services interfere with IE7,
                                        > so
                                        > > > I
                                        > > > > > > stopped
                                        > > > > > > > > them
                                        > > > > > > > > > > from loading. I will try loading them and
                                        > > restarting
                                        > > > > and
                                        > > > > > > then
                                        > > > > > > > > try
                                        > > > > > > > > > > the install again.
                                        > > > > > > > > > >
                                        > > > > > > > > > > I also did not see version 213 anywhere. I only
                                        > > > tried
                                        > > > > 212
                                        > > > > > &
                                        > > > > > > > 214.
                                        > > > > > > > > > > Where is 213?
                                        > > > > > > > > > >
                                        > > > > > > > > > > Thanks
                                        > > > > > > > > > >
                                        > > > > > > > > > > --- In
                                        > wuhu_software_group@yahoogroup s.com, "Brian"
                                        > > > > > > <yahoo@>
                                        > > > > > > > > > wrote:
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > I was getting the same error when WUHU would
                                        > try
                                        > > > to
                                        > > > > > load
                                        > > > > > > at
                                        > > > > > > > > > Windows
                                        > > > > > > > > > > > startup. Never really got it resolved (thought
                                        > I
                                        > > > did,
                                        > > > > > but
                                        > > > > > > it
                                        > > > > > > > > > > > returned). I figured it was just my machine. I
                                        > do
                                        > > > > have
                                        > > > > > a
                                        > > > > > > > > printer
                                        > > > > > > > > > > > installed...I wonder if my printer wasn't
                                        > loading
                                        > > > at
                                        > > > > > > > startup
                                        > > > > > > > > > prior
                                        > > > > > > > > > > > to WUHU, therefore it was not recognizing it?
                                        > I
                                        > > > was
                                        > > > > > using
                                        > > > > > > > > > version
                                        > > > > > > > > > > > 214.
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > I actually decided to try uninstalling 214 and
                                        > > > trying
                                        > > > > > > 213.
                                        > > > > > > > The
                                        > > > > > > > > > > > problem seemed to go away. My other problem
                                        > > > (serial
                                        > > > > > port
                                        > > > > > > > > issue
                                        > > > > > > > > > with
                                        > > > > > > > > > > > console stopping communication with computer
                                        > and
                                        > > > > serial
                                        > > > > > > port
                                        > > > > > > > > > > > indicating it was in use) seemed to go away
                                        > when
                                        > > I
                                        > > > > went
                                        > > > > > > > back
                                        > > > > > > > > to
                                        > > > > > > > > > > 213.
                                        > > > > > > > > > > > Can't say for sure though. I will say it has
                                        > been
                                        > > > > > almost
                                        > > > > > > a
                                        > > > > > > > > day
                                        > > > > > > > > > now
                                        > > > > > > > > > > > without the problems and the problems did seem
                                        > to
                                        > > > > start
                                        > > > > > > > when I
                                        > > > > > > > > > > > installed V214.
                                        > > > > > > > > > > >
                                        > > > > > > > > > > >
                                        > > > > > > > > > > >
                                        > > > > > > > > > > > --- In
                                        > > > > > > wuhu_software_group@yahoogroup s.com, "wuhu_software"
                                        > > > > > > > > > > > <wuhu_software@> wrote:
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > You must have a printer defined on the
                                        > machine
                                        > > > to
                                        > > > > > > install
                                        > > > > > > > > > WUHU.
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > Go to your control panel, click printers.
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > If you do not have one defined, add printer.
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > > > --- In
                                        > > > > > > wuhu_software_group@yahoogroup s.com, "sun_spot_mom"
                                        > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > Please help.
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > When I run install.exe I am getting:
                                        > > > > > > > > > > > > > error
                                        > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > Then:
                                        > > > > > > > > > > > > > WUHU setup
                                        > > > > > > > > > > > > > An error occurred during the move data
                                        > > > process: -
                                        > > > > 119
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > Component: DLLs
                                        > > > > > > > > > > > > > File group: program DLLs
                                        > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > I have tried both versions of the download
                                        > > > files:
                                        > > > > > the
                                        > > > > > > > 212
                                        > > > > > > > > &
                                        > > > > > > > > > 214
                                        > > > > > > > > > > > > > versions and I get the same messages.
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                        > upload
                                        > > > to
                                        > > > > > > > > > wunderground.
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > I have IE7, is that a problem?
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > > > Thanks in advance.
                                        > > > > > > > > > > > > > Kathy
                                        > > > > > > > > > > > > >
                                        > > > > > > > > > > > >
                                        > > > > > > > > > > >
                                        > > > > > > > > > >
                                        > > > > > > > > >
                                        > > > > > > > >
                                        > > > > > > >
                                        > > > > > >
                                        > > > > >
                                        > > > >
                                        > > >
                                        > >
                                        >




                                        --
                                        ============================================================
                                        John Celenza
                                        Director of Weather Technology
                                        Phone (415) 543-5022 x105
                                        FAX   (415) 543-5044
                                        john@...
                                        ============================================================
                                      • wuhu_software
                                        John, Did you happen to notice the other stations with that same Latitude/Longitude? Do you have a default loaded when a user creates a station? You might want
                                        Message 19 of 26 , Jan 3, 2007
                                        • 0 Attachment
                                          John,

                                          Did you happen to notice the other stations with that same
                                          Latitude/Longitude?

                                          Do you have a default loaded when a user creates a station?

                                          You might want to see how many are registered with that location.

                                          I am sure the owners would like to know they are pointing off to
                                          Dearing Kansas.

                                          Thanks.


                                          --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                          <john.celenza@...> wrote:
                                          >
                                          > Hello :-)
                                          >
                                          > Sounds like you're on the right track.
                                          >
                                          > You can test which city your station is nearest to by taking the
                                          lat and lon
                                          > from the Weather Station History page and entering it into the "Fast
                                          > Forecast" box with "lat,lon". You have to use the decimal version
                                          (the one
                                          > in parentheses) with no degree symbol like:
                                          >
                                          > 37.062,-95.677
                                          >
                                          > When I tried this, I also got Dearing Kansas.
                                          >
                                          > When you change your lat/lon for the station in "My Stations", it
                                          will take
                                          > until tomorrow morning for your station to appear on the correct
                                          St. Anne
                                          > pages. This is because our databases have to update.
                                          >
                                          > -John
                                          >
                                          > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                          > >
                                          > > Kathy,
                                          > >
                                          > > I think I have found the problem.
                                          > >
                                          > > Your latitude and longitude numbers entered in the 'My Stations'
                                          page at
                                          > > WU may not be correct. The are actually pointing to Dearing,
                                          Kansas.
                                          > >
                                          > > If I pull up the forecast page for Saint Anne, Illinois:
                                          > >
                                          > >
                                          > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                          query=Saint+Anne%2C+IL#History
                                          > >
                                          > > The station is not listed.
                                          > >
                                          > > I can pull up the station history:
                                          > >
                                          > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                          ID=KILSAINT2
                                          > >
                                          > > When I click the 'View Full Conditions and Forecast' on the
                                          history page,
                                          > > I end up here:
                                          > >
                                          > >
                                          > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                          query=37.062%2C-95.677
                                          > >
                                          > > I believe the latitude and longitude entered for the station are
                                          not
                                          > > correct.
                                          > >
                                          > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                          > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                          > >
                                          > > A quick way to get your latitude and longitude is to pull up:
                                          > >
                                          > > http://terraserver.homeadvisor.msn.com
                                          > >
                                          > > Enter your street address, city and state. When you git go you
                                          can chose
                                          > > either the topo or aerial map. Choose topo.
                                          > >
                                          > > When the next screen is displayed, the URL at the top will look
                                          something
                                          > > like this:
                                          > >
                                          > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                          > > -
                                          83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.com
                                          /image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                          > > ...
                                          > >
                                          > > Get the numbers that are associated with Alon and ALat
                                          > >
                                          > > So the data you would need is:
                                          > >
                                          > > Lat: *42.52875700*
                                          > >
                                          > > Lon: *-83.79587400*
                                          > >
                                          > > Once you have the correct numbers, copy and paste them in the 'My
                                          > > Stations' page back at Weather Underground.
                                          > >
                                          > > ---
                                          > >
                                          > > To John,
                                          > >
                                          > > What is interesting to note here is that when you pull up the
                                          page:
                                          > >
                                          > >
                                          > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                          query=37.062%2C-95.677
                                          > >
                                          > > There are stations listed from all over the country.
                                          > >
                                          > > I suspect that there is a default latitude and longitude being
                                          loaded in
                                          > > the 'My Stations' new user signup??
                                          > >
                                          > > ---
                                          > >
                                          > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                          > > <sun_spot_mom@> wrote:
                                          > > >
                                          > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                          > > > better?) How long should it take to show up?
                                          > > >
                                          > > > Thanks
                                          > > > Kathy
                                          > > >
                                          > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                          > > > wuhu_software@ wrote:
                                          > > > >
                                          > > > > Kathy,
                                          > > > >
                                          > > > > I can see your data but you are right, it is not coming up
                                          when
                                          > > > zip
                                          > > > > code is listed.
                                          > > > >
                                          > > > > I would check under the 'My Stations' link at the Weather
                                          > > > Underground
                                          > > > > page and verify that your zip code, city and state are entered
                                          > > > > correctly there.
                                          > > > >
                                          > > > > If everything is entered correctly and the it does not show
                                          up by
                                          > > > > tomorrow, we will need to contact Weather Underground to
                                          resolve
                                          > > > it.
                                          > > > >
                                          > > > >
                                          > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                          > > > > <sun_spot_mom@> wrote:
                                          > > > > >
                                          > > > > > I am KILSAINT2.
                                          > > > > >
                                          > > > > > Thanks for checking. I guess I am supposed to be able to
                                          look
                                          > > > it
                                          > > > > up
                                          > > > > > by zipcode, right?
                                          > > > > >
                                          > > > > > Thanks
                                          > > > > > Kathy
                                          > > > > >
                                          > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                          > > > > > <wuhu_software@> wrote:
                                          > > > > > >
                                          > > > > > >
                                          > > > > > > Kathy,
                                          > > > > > >
                                          > > > > > > What is your WU Station ID?
                                          > > > > > >
                                          > > > > > > Tried looking it up by zipcode, did not see yours in
                                          there.
                                          > > > > > >
                                          > > > > > > There was another WUHU station but it has been uploading
                                          for
                                          > > > some
                                          > > > > > > time.
                                          > > > > > >
                                          > > > > > >
                                          > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                          > > > > > > <sun_spot_mom@> wrote:
                                          > > > > > > >
                                          > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                          day
                                          > > > to
                                          > > > > > see
                                          > > > > > > it
                                          > > > > > > > when I type in my zipcode?
                                          > > > > > > >
                                          > > > > > > > Thanks much.
                                          > > > > > > > :>)
                                          > > > > > > > Kathy
                                          > > > > > > >
                                          > > > > > > > --- In
                                          wuhu_software_group@yahoogroups.com, "wuhu_software"
                                          > > > > > > > <wuhu_software@> wrote:
                                          > > > > > > > >
                                          > > > > > > > >
                                          > > > > > > > > Kathy,
                                          > > > > > > > >
                                          > > > > > > > > Sounds like you are almost there...
                                          > > > > > > > >
                                          > > > > > > > > Go to the Weather Underground site and log in with
                                          your WU
                                          > > > > > email
                                          > > > > > > > and
                                          > > > > > > > > password.
                                          > > > > > > > >
                                          > > > > > > > > Once you are logged in, there is a "My Stations" link.
                                          > > > Click
                                          > > > > > it.
                                          > > > > > > > >
                                          > > > > > > > > On the next page you will see something like:
                                          > > > > > > > >
                                          > > > > > > > > Current Stations
                                          > > > > > > > > ID: KMI????? | data
                                          > > > > > > > >
                                          > > > > > > > > Your station id follows ID:
                                          > > > > > > > >
                                          > > > > > > > > The password entered in to WUHU is the same as you
                                          use for
                                          > > > > > your
                                          > > > > > > > > normal WU account. It *is* case sensitive.
                                          > > > > > > > >
                                          > > > > > > > >
                                          > > > > > > > > --- In
                                          wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                          > > > > > > > > <sun_spot_mom@> wrote:
                                          > > > > > > > > >
                                          > > > > > > > > > I do believe that it will work now (except for a
                                          minor
                                          > > > > > problem,
                                          > > > > > > I
                                          > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                          my PWS
                                          > > > > ID?
                                          > > > > > > I've
                                          > > > > > > > > > been looking at the member settings and do not see
                                          it.
                                          > > > I
                                          > > > > > think
                                          > > > > > > > its
                                          > > > > > > > > > KIL something... I was using my "handle" for the ID.
                                          > > > > > > > > >
                                          > > > > > > > > > My gauges are showing activity. I just need to see
                                          it
                                          > > > > > upload.
                                          > > > > > > > > > The problem was during the install of wuhu I chose
                                          to
                                          > > > > > install
                                          > > > > > > in
                                          > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                          put
                                          > > > it
                                          > > > > > > > there.
                                          > > > > > > > > >
                                          > > > > > > > > > Check out the weather for 60964 coming soon!
                                          > > > > > > > > >
                                          > > > > > > > > > Thanks again.
                                          > > > > > > > > > Kathy
                                          > > > > > > > > >
                                          > > > > > > > > >
                                          > > > > > > > > >
                                          > > > > > > > > > --- In
                                          > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                          > > > > > > > > > <wuhu_software@> wrote:
                                          > > > > > > > > > >
                                          > > > > > > > > > > Kathy,
                                          > > > > > > > > > >
                                          > > > > > > > > > > I am not sure which console you have but the next
                                          few
                                          > > > > > > > paragraphs
                                          > > > > > > > > > > assume you are using a WS-23XX type station.
                                          > > > > > > > > > >
                                          > > > > > > > > > > There are a couple of methods you can use to have
                                          WUHU
                                          > > > > > > > intercept
                                          > > > > > > > > > data
                                          > > > > > > > > > > from the console.
                                          > > > > > > > > > >
                                          > > > > > > > > > > The first is quite easy. You run Heavyweather
                                          Beta 2.0
                                          > > > > > (newer
                                          > > > > > > > > than
                                          > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                          > > > monitors
                                          > > > > a
                                          > > > > > > file
                                          > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                          > > > > > Heavweather
                                          > > > > > > and
                                          > > > > > > > > > WUHU
                                          > > > > > > > > > > must be run at all times otherwise WUHU will not
                                          > > > receive
                                          > > > > > the
                                          > > > > > > > > > > currdat.lst file updates. That method is fine if
                                          you
                                          > > > > > insist
                                          > > > > > > on
                                          > > > > > > > > > > running Heavyweather. Personally, I think
                                          Heavyweather
                                          > > > is
                                          > > > > > a
                                          > > > > > > CPU
                                          > > > > > > > > hog
                                          > > > > > > > > > > (can easily chew up 20-30% of your processor even
                                          when
                                          > > > > > idle)
                                          > > > > > > so
                                          > > > > > > > I
                                          > > > > > > > > > do
                                          > > > > > > > > > > not run it.
                                          > > > > > > > > > >
                                          > > > > > > > > > > If you run wired mode (wire between the console
                                          and
                                          > > > the
                                          > > > > > > remote
                                          > > > > > > > > > thermo
                                          > > > > > > > > > > unit), your weather data can be updated every 10
                                          > > > seconds
                                          > > > > > or
                                          > > > > > > so.
                                          > > > > > > > > In
                                          > > > > > > > > > > this case, you would probably want to run WUHU in
                                          > > > direct
                                          > > > > > > serial
                                          > > > > > > > > > > communications mode. If you are running wireless
                                          mode
                                          > > > (no
                                          > > > > > > wire
                                          > > > > > > > > > > between the console and remote thermo unit), your
                                          > > > weather
                                          > > > > > > data
                                          > > > > > > > > will
                                          > > > > > > > > > > only be updated once per minute regardless of the
                                          > > > > software
                                          > > > > > > > > > > combination you choose.
                                          > > > > > > > > > >
                                          > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                          > > > > > terminate
                                          > > > > > > the
                                          > > > > > > > > > > Heavyweather application. When you choose this
                                          method,
                                          > > > > you
                                          > > > > > > must
                                          > > > > > > > > hit
                                          > > > > > > > > > > Stop on WUHU so you can make changes to the
                                          settings.
                                          > > > In
                                          > > > > > the
                                          > > > > > > > > > general
                                          > > > > > > > > > > settings, there is a pulldown combo box. You can
                                          > > > > > select "WS-
                                          > > > > > > > 23XX
                                          > > > > > > > > > > Direct Serial Access", then to the right of the
                                          combo
                                          > > > > box,
                                          > > > > > > > select
                                          > > > > > > > > > the
                                          > > > > > > > > > > communications port that the console is hooked up
                                          to.
                                          > > > > Once
                                          > > > > > > the
                                          > > > > > > > > > > changes are made, you hit start. WUHU will then
                                          manage
                                          > > > > the
                                          > > > > > > > > > > communications with the console.
                                          > > > > > > > > > >
                                          > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                          > > > support
                                          > > > > > > > direct
                                          > > > > > > > > > > serial communications at this time so you must
                                          run the
                                          > > > > > > > > Heavyweather
                                          > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                          > > > > > application
                                          > > > > > > > > will
                                          > > > > > > > > > > write to the currdat.lst file once per minute. As
                                          with
                                          > > > > the
                                          > > > > > > > first
                                          > > > > > > > > > > method, Heavyweather Pro and WUHU must be running
                                          at
                                          > > > all
                                          > > > > > > times.
                                          > > > > > > > > > >
                                          > > > > > > > > > > Well, that is the long answer. I hope things are
                                          a bit
                                          > > > > > > clearer
                                          > > > > > > > > now.
                                          > > > > > > > > > >
                                          > > > > > > > > > >
                                          > > > > > > > > > > --- In
                                          > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                          > > > > > > > > > > <sun_spot_mom@> wrote:
                                          > > > > > > > > > > >
                                          > > > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                          > > > > works,
                                          > > > > > > > > although
                                          > > > > > > > > > > it
                                          > > > > > > > > > > > seems slower.
                                          > > > > > > > > > > > So, now I have it installed, not sure if it's
                                          > > > getting
                                          > > > > > the
                                          > > > > > > > > > readings,
                                          > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                          on
                                          > > > > > logging
                                          > > > > > > to
                                          > > > > > > > > > show
                                          > > > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                          > > > much
                                          > > > > in
                                          > > > > > > > there
                                          > > > > > > > > as
                                          > > > > > > > > > > > yet.
                                          > > > > > > > > > > >
                                          > > > > > > > > > > > Perhaps some tips here would help?
                                          > > > > > > > > > > >
                                          > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                          > > > tired
                                          > > > > > after
                                          > > > > > > > > > > bringing
                                          > > > > > > > > > > > in the new year.
                                          > > > > > > > > > > >
                                          > > > > > > > > > > > Happy New Year!
                                          > > > > > > > > > > > Thanks for your help.
                                          > > > > > > > > > > > Kathy
                                          > > > > > > > > > > >
                                          > > > > > > > > > > > --- In
                                          wuhu_software_group@yahoogroups.com, "<<<<<
                                          > > > > > Dickie
                                          > > > > > > > > > Bradford
                                          > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > I had this problem a few days ago with windows
                                          > > > 2000,
                                          > > > > > I
                                          > > > > > > had
                                          > > > > > > > a
                                          > > > > > > > > > > > printer
                                          > > > > > > > > > > > > installed and everytime i started WUHU it
                                          said I
                                          > > > > > needed
                                          > > > > > > a
                                          > > > > > > > > > > printer,
                                          > > > > > > > > > > > what I
                                          > > > > > > > > > > > > did was deleted the printer, rebooted and
                                          > > > reinstalled
                                          > > > > > the
                                          > > > > > > > > > printer
                                          > > > > > > > > > > > again and
                                          > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                          > > > since.
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > Dickie
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > -----Original Message-----
                                          > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                          > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]On
                                          > > > Behalf
                                          > > > > > Of
                                          > > > > > > > > > > > sun_spot_mom
                                          > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                          > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                          > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                          > > > installing
                                          > > > > > wuhu
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > It could all be IE7 related...
                                          > > > > > > > > > > > > When I said to go ahead and install IE7, I had
                                          > > > > > problems
                                          > > > > > > > > > > > connecting.
                                          > > > > > > > > > > > > I went through all services and stuff in
                                          startup
                                          > > > > and
                                          > > > > > it
                                          > > > > > > > > > > appeared
                                          > > > > > > > > > > > that
                                          > > > > > > > > > > > > my camera & printer services interfere with
                                          IE7,
                                          > > > so
                                          > > > > > I
                                          > > > > > > > > stopped
                                          > > > > > > > > > > them
                                          > > > > > > > > > > > > from loading. I will try loading them and
                                          > > > > restarting
                                          > > > > > > and
                                          > > > > > > > > then
                                          > > > > > > > > > > try
                                          > > > > > > > > > > > > the install again.
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                          only
                                          > > > > > tried
                                          > > > > > > 212
                                          > > > > > > > &
                                          > > > > > > > > > 214.
                                          > > > > > > > > > > > > Where is 213?
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > Thanks
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > > > --- In
                                          > > > wuhu_software_group@yahoogroups.com, "Brian"
                                          > > > > > > > > <yahoo@>
                                          > > > > > > > > > > > wrote:
                                          > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > I was getting the same error when WUHU would
                                          > > > try
                                          > > > > > to
                                          > > > > > > > load
                                          > > > > > > > > at
                                          > > > > > > > > > > > Windows
                                          > > > > > > > > > > > > > startup. Never really got it resolved
                                          (thought
                                          > > > I
                                          > > > > > did,
                                          > > > > > > > but
                                          > > > > > > > > it
                                          > > > > > > > > > > > > > returned). I figured it was just my
                                          machine. I
                                          > > > do
                                          > > > > > > have
                                          > > > > > > > a
                                          > > > > > > > > > > printer
                                          > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                          > > > loading
                                          > > > > > at
                                          > > > > > > > > > startup
                                          > > > > > > > > > > > prior
                                          > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                          it?
                                          > > > I
                                          > > > > > was
                                          > > > > > > > using
                                          > > > > > > > > > > > version
                                          > > > > > > > > > > > > > 214.
                                          > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                          and
                                          > > > > > trying
                                          > > > > > > > > 213.
                                          > > > > > > > > > The
                                          > > > > > > > > > > > > > problem seemed to go away. My other problem
                                          > > > > > (serial
                                          > > > > > > > port
                                          > > > > > > > > > > issue
                                          > > > > > > > > > > > with
                                          > > > > > > > > > > > > > console stopping communication with computer
                                          > > > and
                                          > > > > > > serial
                                          > > > > > > > > port
                                          > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                          > > > when
                                          > > > > I
                                          > > > > > > went
                                          > > > > > > > > > back
                                          > > > > > > > > > > to
                                          > > > > > > > > > > > > 213.
                                          > > > > > > > > > > > > > Can't say for sure though. I will say it has
                                          > > > been
                                          > > > > > > > almost
                                          > > > > > > > > a
                                          > > > > > > > > > > day
                                          > > > > > > > > > > > now
                                          > > > > > > > > > > > > > without the problems and the problems did
                                          seem
                                          > > > to
                                          > > > > > > start
                                          > > > > > > > > > when I
                                          > > > > > > > > > > > > > installed V214.
                                          > > > > > > > > > > > > >
                                          > > > > > > > > > > > > >
                                          > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > --- In
                                          > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                          > > > > > > > > > > > > > <wuhu_software@> wrote:
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > You must have a printer defined on the
                                          > > > machine
                                          > > > > > to
                                          > > > > > > > > install
                                          > > > > > > > > > > > WUHU.
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > Go to your control panel, click printers.
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > If you do not have one defined, add
                                          printer.
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > --- In
                                          > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                          > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > Please help.
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                          > > > > > > > > > > > > > > > error
                                          > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > Then:
                                          > > > > > > > > > > > > > > > WUHU setup
                                          > > > > > > > > > > > > > > > An error occurred during the move data
                                          > > > > > process: -
                                          > > > > > > 119
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > Component: DLLs
                                          > > > > > > > > > > > > > > > File group: program DLLs
                                          > > > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > I have tried both versions of the
                                          download
                                          > > > > > files:
                                          > > > > > > > the
                                          > > > > > > > > > 212
                                          > > > > > > > > > > &
                                          > > > > > > > > > > > 214
                                          > > > > > > > > > > > > > > > versions and I get the same messages.
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                          > > > upload
                                          > > > > > to
                                          > > > > > > > > > > > wunderground.
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > > > Thanks in advance.
                                          > > > > > > > > > > > > > > > Kathy
                                          > > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > > >
                                          > > > > > > > > > > > > >
                                          > > > > > > > > > > > >
                                          > > > > > > > > > > >
                                          > > > > > > > > > >
                                          > > > > > > > > >
                                          > > > > > > > >
                                          > > > > > > >
                                          > > > > > >
                                          > > > > >
                                          > > > >
                                          > > >
                                          > >
                                          > >
                                          > >
                                          >
                                          >
                                          >
                                          > --
                                          > ============================================================
                                          > John Celenza
                                          > Director of Weather Technology
                                          > Phone (415) 543-5022 x105
                                          > FAX (415) 543-5044
                                          > john@...
                                          > ============================================================
                                          >
                                        • John Celenza
                                          I have seen this, and it s on a oh my list of bugs to fix. What happens is that Dearing Kansas is the center of the US. So, if an address lookup fails, we
                                          Message 20 of 26 , Jan 3, 2007
                                          • 0 Attachment
                                            I have seen this, and it's on a "oh my" list of bugs to fix.

                                            What happens is that Dearing Kansas is the center of the US. So, if an address lookup fails, we get Dearing Kansas back since the geocoder defaults to the center of the country!

                                            -John

                                            On 1/3/07, wuhu_software <wuhu_software@...> wrote:


                                            John,

                                            Did you happen to notice the other stations with that same
                                            Latitude/Longitude?

                                            Do you have a default loaded when a user creates a station?

                                            You might want to see how many are registered with that location.

                                            I am sure the owners would like to know they are pointing off to
                                            Dearing Kansas.

                                            Thanks.

                                            --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                            <john.celenza@...> wrote:
                                            >
                                            > Hello :-)
                                            >
                                            > Sounds like you're on the right track.
                                            >
                                            > You can test which city your station is nearest to by taking the
                                            lat and lon
                                            > from the Weather Station History page and entering it into the "Fast
                                            > Forecast" box with "lat,lon". You have to use the decimal version
                                            (the one
                                            > in parentheses) with no degree symbol like:
                                            >
                                            > 37.062,-95.677
                                            >
                                            > When I tried this, I also got Dearing Kansas.
                                            >
                                            > When you change your lat/lon for the station in "My Stations", it
                                            will take
                                            > until tomorrow morning for your station to appear on the correct
                                            St. Anne
                                            > pages. This is because our databases have to update.
                                            >
                                            > -John
                                            >

                                            > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                            > >
                                            > > Kathy,
                                            > >
                                            > > I think I have found the problem.
                                            > >
                                            > > Your latitude and longitude numbers entered in the 'My Stations'
                                            page at
                                            > > WU may not be correct. The are actually pointing to Dearing,
                                            Kansas.
                                            > >
                                            > > If I pull up the forecast page for Saint Anne, Illinois:
                                            > >
                                            > >
                                            > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                            query=Saint+Anne%2C+IL#History
                                            > >
                                            > > The station is not listed.
                                            > >
                                            > > I can pull up the station history:
                                            > >
                                            > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                            ID=KILSAINT2
                                            > >
                                            > > When I click the 'View Full Conditions and Forecast' on the
                                            history page,
                                            > > I end up here:
                                            > >
                                            > >
                                            > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                            query=37.062%2C-95.677
                                            > >
                                            > > I believe the latitude and longitude entered for the station are
                                            not
                                            > > correct.
                                            > >
                                            > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                            > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                            > >
                                            > > A quick way to get your latitude and longitude is to pull up:
                                            > >
                                            > > http://terraserver.homeadvisor.msn.com
                                            > >
                                            > > Enter your street address, city and state. When you git go you
                                            can chose
                                            > > either the topo or aerial map. Choose topo.
                                            > >
                                            > > When the next screen is displayed, the URL at the top will look
                                            something
                                            > > like this:
                                            > >
                                            > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                            > > -
                                            83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.com
                                            /image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                            > > ...
                                            > >
                                            > > Get the numbers that are associated with Alon and ALat
                                            > >
                                            > > So the data you would need is:
                                            > >
                                            > > Lat: *42.52875700*
                                            > >
                                            > > Lon: *-83.79587400*
                                            > >
                                            > > Once you have the correct numbers, copy and paste them in the 'My
                                            > > Stations' page back at Weather Underground.
                                            > >
                                            > > ---
                                            > >
                                            > > To John,
                                            > >
                                            > > What is interesting to note here is that when you pull up the
                                            page:
                                            > >
                                            > >
                                            > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                            query=37.062%2C-95.677
                                            > >
                                            > > There are stations listed from all over the country.
                                            > >
                                            > > I suspect that there is a default latitude and longitude being
                                            loaded in
                                            > > the 'My Stations' new user signup??
                                            > >
                                            > > ---
                                            > >
                                            > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                            > > <sun_spot_mom@> wrote:
                                            > > >
                                            > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                            > > > better?) How long should it take to show up?
                                            > > >
                                            > > > Thanks
                                            > > > Kathy
                                            > > >
                                            > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                            > > > wuhu_software@ wrote:
                                            > > > >
                                            > > > > Kathy,
                                            > > > >
                                            > > > > I can see your data but you are right, it is not coming up
                                            when
                                            > > > zip
                                            > > > > code is listed.
                                            > > > >
                                            > > > > I would check under the 'My Stations' link at the Weather
                                            > > > Underground
                                            > > > > page and verify that your zip code, city and state are entered
                                            > > > > correctly there.
                                            > > > >
                                            > > > > If everything is entered correctly and the it does not show
                                            up by
                                            > > > > tomorrow, we will need to contact Weather Underground to
                                            resolve
                                            > > > it.
                                            > > > >
                                            > > > >
                                            > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                            > > > > <sun_spot_mom@> wrote:
                                            > > > > >
                                            > > > > > I am KILSAINT2.
                                            > > > > >
                                            > > > > > Thanks for checking. I guess I am supposed to be able to
                                            look
                                            > > > it
                                            > > > > up
                                            > > > > > by zipcode, right?
                                            > > > > >
                                            > > > > > Thanks
                                            > > > > > Kathy
                                            > > > > >
                                            > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                            > > > > > <wuhu_software@> wrote:
                                            > > > > > >
                                            > > > > > >
                                            > > > > > > Kathy,
                                            > > > > > >
                                            > > > > > > What is your WU Station ID?
                                            > > > > > >
                                            > > > > > > Tried looking it up by zipcode, did not see yours in
                                            there.
                                            > > > > > >
                                            > > > > > > There was another WUHU station but it has been uploading
                                            for
                                            > > > some
                                            > > > > > > time.
                                            > > > > > >
                                            > > > > > >
                                            > > > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                            > > > > > > <sun_spot_mom@> wrote:
                                            > > > > > > >
                                            > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                            day
                                            > > > to
                                            > > > > > see
                                            > > > > > > it
                                            > > > > > > > when I type in my zipcode?
                                            > > > > > > >
                                            > > > > > > > Thanks much.
                                            > > > > > > > :>)
                                            > > > > > > > Kathy
                                            > > > > > > >
                                            > > > > > > > --- In
                                            wuhu_software_group@yahoogroups.com, "wuhu_software"
                                            > > > > > > > <wuhu_software@> wrote:
                                            > > > > > > > >
                                            > > > > > > > >
                                            > > > > > > > > Kathy,
                                            > > > > > > > >
                                            > > > > > > > > Sounds like you are almost there...
                                            > > > > > > > >
                                            > > > > > > > > Go to the Weather Underground site and log in with
                                            your WU
                                            > > > > > email
                                            > > > > > > > and
                                            > > > > > > > > password.
                                            > > > > > > > >
                                            > > > > > > > > Once you are logged in, there is a "My Stations" link.
                                            > > > Click
                                            > > > > > it.
                                            > > > > > > > >
                                            > > > > > > > > On the next page you will see something like:
                                            > > > > > > > >
                                            > > > > > > > > Current Stations
                                            > > > > > > > > ID: KMI????? | data
                                            > > > > > > > >
                                            > > > > > > > > Your station id follows ID:
                                            > > > > > > > >
                                            > > > > > > > > The password entered in to WUHU is the same as you
                                            use for
                                            > > > > > your
                                            > > > > > > > > normal WU account. It *is* case sensitive.
                                            > > > > > > > >
                                            > > > > > > > >
                                            > > > > > > > > --- In
                                            wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                            > > > > > > > > <sun_spot_mom@> wrote:
                                            > > > > > > > > >
                                            > > > > > > > > > I do believe that it will work now (except for a
                                            minor
                                            > > > > > problem,
                                            > > > > > > I
                                            > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                            my PWS
                                            > > > > ID?
                                            > > > > > > I've
                                            > > > > > > > > > been looking at the member settings and do not see
                                            it.
                                            > > > I
                                            > > > > > think
                                            > > > > > > > its
                                            > > > > > > > > > KIL something... I was using my "handle" for the ID.
                                            > > > > > > > > >
                                            > > > > > > > > > My gauges are showing activity. I just need to see
                                            it
                                            > > > > > upload.
                                            > > > > > > > > > The problem was during the install of wuhu I chose
                                            to
                                            > > > > > install
                                            > > > > > > in
                                            > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                            put
                                            > > > it
                                            > > > > > > > there.
                                            > > > > > > > > >
                                            > > > > > > > > > Check out the weather for 60964 coming soon!
                                            > > > > > > > > >
                                            > > > > > > > > > Thanks again.
                                            > > > > > > > > > Kathy
                                            > > > > > > > > >
                                            > > > > > > > > >
                                            > > > > > > > > >
                                            > > > > > > > > > --- In
                                            > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                            > > > > > > > > > <wuhu_software@> wrote:
                                            > > > > > > > > > >
                                            > > > > > > > > > > Kathy,
                                            > > > > > > > > > >
                                            > > > > > > > > > > I am not sure which console you have but the next
                                            few
                                            > > > > > > > paragraphs
                                            > > > > > > > > > > assume you are using a WS-23XX type station.
                                            > > > > > > > > > >
                                            > > > > > > > > > > There are a couple of methods you can use to have
                                            WUHU
                                            > > > > > > > intercept
                                            > > > > > > > > > data
                                            > > > > > > > > > > from the console.
                                            > > > > > > > > > >
                                            > > > > > > > > > > The first is quite easy. You run Heavyweather
                                            Beta 2.0
                                            > > > > > (newer
                                            > > > > > > > > than
                                            > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                            > > > monitors
                                            > > > > a
                                            > > > > > > file
                                            > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                            > > > > > Heavweather
                                            > > > > > > and
                                            > > > > > > > > > WUHU
                                            > > > > > > > > > > must be run at all times otherwise WUHU will not
                                            > > > receive
                                            > > > > > the
                                            > > > > > > > > > > currdat.lst file updates. That method is fine if
                                            you
                                            > > > > > insist
                                            > > > > > > on
                                            > > > > > > > > > > running Heavyweather. Personally, I think
                                            Heavyweather
                                            > > > is
                                            > > > > > a
                                            > > > > > > CPU
                                            > > > > > > > > hog
                                            > > > > > > > > > > (can easily chew up 20-30% of your processor even
                                            when
                                            > > > > > idle)
                                            > > > > > > so
                                            > > > > > > > I
                                            > > > > > > > > > do
                                            > > > > > > > > > > not run it.
                                            > > > > > > > > > >
                                            > > > > > > > > > > If you run wired mode (wire between the console
                                            and
                                            > > > the
                                            > > > > > > remote
                                            > > > > > > > > > thermo
                                            > > > > > > > > > > unit), your weather data can be updated every 10
                                            > > > seconds
                                            > > > > > or
                                            > > > > > > so.
                                            > > > > > > > > In
                                            > > > > > > > > > > this case, you would probably want to run WUHU in
                                            > > > direct
                                            > > > > > > serial
                                            > > > > > > > > > > communications mode. If you are running wireless
                                            mode
                                            > > > (no
                                            > > > > > > wire
                                            > > > > > > > > > > between the console and remote thermo unit), your
                                            > > > weather
                                            > > > > > > data
                                            > > > > > > > > will
                                            > > > > > > > > > > only be updated once per minute regardless of the
                                            > > > > software
                                            > > > > > > > > > > combination you choose.
                                            > > > > > > > > > >
                                            > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                            > > > > > terminate
                                            > > > > > > the
                                            > > > > > > > > > > Heavyweather application. When you choose this
                                            method,
                                            > > > > you
                                            > > > > > > must
                                            > > > > > > > > hit
                                            > > > > > > > > > > Stop on WUHU so you can make changes to the
                                            settings.
                                            > > > In
                                            > > > > > the
                                            > > > > > > > > > general
                                            > > > > > > > > > > settings, there is a pulldown combo box. You can
                                            > > > > > select "WS-
                                            > > > > > > > 23XX
                                            > > > > > > > > > > Direct Serial Access", then to the right of the
                                            combo
                                            > > > > box,
                                            > > > > > > > select
                                            > > > > > > > > > the
                                            > > > > > > > > > > communications port that the console is hooked up
                                            to.
                                            > > > > Once
                                            > > > > > > the
                                            > > > > > > > > > > changes are made, you hit start. WUHU will then
                                            manage
                                            > > > > the
                                            > > > > > > > > > > communications with the console.
                                            > > > > > > > > > >
                                            > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                            > > > support
                                            > > > > > > > direct
                                            > > > > > > > > > > serial communications at this time so you must
                                            run the
                                            > > > > > > > > Heavyweather
                                            > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                            > > > > > application
                                            > > > > > > > > will
                                            > > > > > > > > > > write to the currdat.lst file once per minute. As
                                            with
                                            > > > > the
                                            > > > > > > > first
                                            > > > > > > > > > > method, Heavyweather Pro and WUHU must be running
                                            at
                                            > > > all
                                            > > > > > > times.
                                            > > > > > > > > > >
                                            > > > > > > > > > > Well, that is the long answer. I hope things are
                                            a bit
                                            > > > > > > clearer
                                            > > > > > > > > now.
                                            > > > > > > > > > >
                                            > > > > > > > > > >
                                            > > > > > > > > > > --- In
                                            > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                            > > > > > > > > > > <sun_spot_mom@> wrote:
                                            > > > > > > > > > > >
                                            > > > > > > > > > > > Okay!! That worked...and interestingly IE7 still
                                            > > > > works,
                                            > > > > > > > > although
                                            > > > > > > > > > > it
                                            > > > > > > > > > > > seems slower.
                                            > > > > > > > > > > > So, now I have it installed, not sure if it's
                                            > > > getting
                                            > > > > > the
                                            > > > > > > > > > readings,
                                            > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                            on
                                            > > > > > logging
                                            > > > > > > to
                                            > > > > > > > > > show
                                            > > > > > > > > > > > uploads and console comm. errors. I'm not seeing
                                            > > > much
                                            > > > > in
                                            > > > > > > > there
                                            > > > > > > > > as
                                            > > > > > > > > > > > yet.
                                            > > > > > > > > > > >
                                            > > > > > > > > > > > Perhaps some tips here would help?
                                            > > > > > > > > > > >
                                            > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                            > > > tired
                                            > > > > > after
                                            > > > > > > > > > > bringing
                                            > > > > > > > > > > > in the new year.
                                            > > > > > > > > > > >
                                            > > > > > > > > > > > Happy New Year!
                                            > > > > > > > > > > > Thanks for your help.
                                            > > > > > > > > > > > Kathy
                                            > > > > > > > > > > >
                                            > > > > > > > > > > > --- In
                                            wuhu_software_group@yahoogroups.com, "<<<<<
                                            > > > > > Dickie
                                            > > > > > > > > > Bradford
                                            > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > I had this problem a few days ago with windows
                                            > > > 2000,
                                            > > > > > I
                                            > > > > > > had
                                            > > > > > > > a
                                            > > > > > > > > > > > printer
                                            > > > > > > > > > > > > installed and everytime i started WUHU it
                                            said I
                                            > > > > > needed
                                            > > > > > > a
                                            > > > > > > > > > > printer,
                                            > > > > > > > > > > > what I
                                            > > > > > > > > > > > > did was deleted the printer, rebooted and
                                            > > > reinstalled
                                            > > > > > the
                                            > > > > > > > > > printer
                                            > > > > > > > > > > > again and
                                            > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                            > > > since.
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > Dickie
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > -----Original Message-----
                                            > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                            > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com ]On
                                            > > > Behalf
                                            > > > > > Of
                                            > > > > > > > > > > > sun_spot_mom
                                            > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                            > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                            > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                            > > > installing
                                            > > > > > wuhu
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > It could all be IE7 related...
                                            > > > > > > > > > > > > When I said to go ahead and install IE7, I had
                                            > > > > > problems
                                            > > > > > > > > > > > connecting.
                                            > > > > > > > > > > > > I went through all services and stuff in
                                            startup
                                            > > > > and
                                            > > > > > it
                                            > > > > > > > > > > appeared
                                            > > > > > > > > > > > that
                                            > > > > > > > > > > > > my camera & printer services interfere with
                                            IE7,
                                            > > > so
                                            > > > > > I
                                            > > > > > > > > stopped
                                            > > > > > > > > > > them
                                            > > > > > > > > > > > > from loading. I will try loading them and
                                            > > > > restarting
                                            > > > > > > and
                                            > > > > > > > > then
                                            > > > > > > > > > > try
                                            > > > > > > > > > > > > the install again.
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                            only
                                            > > > > > tried
                                            > > > > > > 212
                                            > > > > > > > &
                                            > > > > > > > > > 214.
                                            > > > > > > > > > > > > Where is 213?
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > Thanks
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > > > --- In
                                            > > > wuhu_software_group@yahoogroups.com, "Brian"

                                            > > > > > > > > <yahoo@>
                                            > > > > > > > > > > > wrote:
                                            > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > I was getting the same error when WUHU would
                                            > > > try
                                            > > > > > to
                                            > > > > > > > load
                                            > > > > > > > > at
                                            > > > > > > > > > > > Windows
                                            > > > > > > > > > > > > > startup. Never really got it resolved
                                            (thought
                                            > > > I
                                            > > > > > did,
                                            > > > > > > > but
                                            > > > > > > > > it
                                            > > > > > > > > > > > > > returned). I figured it was just my
                                            machine. I
                                            > > > do
                                            > > > > > > have
                                            > > > > > > > a
                                            > > > > > > > > > > printer
                                            > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                            > > > loading
                                            > > > > > at
                                            > > > > > > > > > startup
                                            > > > > > > > > > > > prior
                                            > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                            it?
                                            > > > I
                                            > > > > > was
                                            > > > > > > > using
                                            > > > > > > > > > > > version
                                            > > > > > > > > > > > > > 214.
                                            > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                            and
                                            > > > > > trying
                                            > > > > > > > > 213.
                                            > > > > > > > > > The
                                            > > > > > > > > > > > > > problem seemed to go away. My other problem
                                            > > > > > (serial
                                            > > > > > > > port
                                            > > > > > > > > > > issue
                                            > > > > > > > > > > > with
                                            > > > > > > > > > > > > > console stopping communication with computer
                                            > > > and
                                            > > > > > > serial
                                            > > > > > > > > port
                                            > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                            > > > when
                                            > > > > I
                                            > > > > > > went
                                            > > > > > > > > > back
                                            > > > > > > > > > > to
                                            > > > > > > > > > > > > 213.
                                            > > > > > > > > > > > > > Can't say for sure though. I will say it has
                                            > > > been
                                            > > > > > > > almost
                                            > > > > > > > > a
                                            > > > > > > > > > > day
                                            > > > > > > > > > > > now
                                            > > > > > > > > > > > > > without the problems and the problems did
                                            seem
                                            > > > to
                                            > > > > > > start
                                            > > > > > > > > > when I
                                            > > > > > > > > > > > > > installed V214.
                                            > > > > > > > > > > > > >
                                            > > > > > > > > > > > > >
                                            > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > --- In
                                            > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                            > > > > > > > > > > > > > <wuhu_software@> wrote:
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > You must have a printer defined on the
                                            > > > machine
                                            > > > > > to
                                            > > > > > > > > install
                                            > > > > > > > > > > > WUHU.
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > Go to your control panel, click printers.
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > If you do not have one defined, add
                                            printer.
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > --- In
                                            > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                            > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > Please help.
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                            > > > > > > > > > > > > > > > error
                                            > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > Then:
                                            > > > > > > > > > > > > > > > WUHU setup
                                            > > > > > > > > > > > > > > > An error occurred during the move data
                                            > > > > > process: -
                                            > > > > > > 119
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > Component: DLLs
                                            > > > > > > > > > > > > > > > File group: program DLLs
                                            > > > > > > > > > > > > > > > File: D:\program files\wuhu\teechart.ocx
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > I have tried both versions of the
                                            download
                                            > > > > > files:
                                            > > > > > > > the
                                            > > > > > > > > > 212
                                            > > > > > > > > > > &
                                            > > > > > > > > > > > 214
                                            > > > > > > > > > > > > > > > versions and I get the same messages.
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                            > > > upload
                                            > > > > > to
                                            > > > > > > > > > > > wunderground.
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > > > Thanks in advance.
                                            > > > > > > > > > > > > > > > Kathy
                                            > > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > > >
                                            > > > > > > > > > > > > >
                                            > > > > > > > > > > > >
                                            > > > > > > > > > > >
                                            > > > > > > > > > >
                                            > > > > > > > > >
                                            > > > > > > > >
                                            > > > > > > >
                                            > > > > > >
                                            > > > > >
                                            > > > >
                                            > > >
                                            > >
                                            > >
                                            > >
                                            >
                                            >
                                            >
                                            > --
                                            > ============================================================
                                            > John Celenza
                                            > Director of Weather Technology
                                            > Phone (415) 543-5022 x105
                                            > FAX (415) 543-5044
                                            > john@...
                                            > ============================================================
                                            >




                                            --
                                            ============================================================
                                            John Celenza
                                            Director of Weather Technology
                                            Phone (415) 543-5022 x105
                                            FAX   (415) 543-5044
                                            john@...
                                            ============================================================
                                          • sun_spot_mom
                                            Okay, you guys are great. I believe I have changed the lat/lon to the correct data. I look forward to seeing St. Anne come up tomorrow. Thanks for all of your
                                            Message 21 of 26 , Jan 3, 2007
                                            • 0 Attachment
                                              Okay, you guys are great.
                                              I believe I have changed the lat/lon to the correct data.
                                              I look forward to seeing St. Anne come up tomorrow.
                                              Thanks for all of your help.

                                              Kathy

                                              --- In wuhu_software_group@yahoogroups.com, "John Celenza"
                                              <john.celenza@...> wrote:
                                              >
                                              > Hello :-)
                                              >
                                              > Sounds like you're on the right track.
                                              >
                                              > You can test which city your station is nearest to by taking the
                                              lat and lon
                                              > from the Weather Station History page and entering it into
                                              the "Fast
                                              > Forecast" box with "lat,lon". You have to use the decimal version
                                              (the one
                                              > in parentheses) with no degree symbol like:
                                              >
                                              > 37.062,-95.677
                                              >
                                              > When I tried this, I also got Dearing Kansas.
                                              >
                                              > When you change your lat/lon for the station in "My Stations", it
                                              will take
                                              > until tomorrow morning for your station to appear on the correct
                                              St. Anne
                                              > pages. This is because our databases have to update.
                                              >
                                              > -John
                                              >
                                              > On 1/3/07, wuhu_software <wuhu_software@...> wrote:
                                              > >
                                              > > Kathy,
                                              > >
                                              > > I think I have found the problem.
                                              > >
                                              > > Your latitude and longitude numbers entered in the 'My Stations'
                                              page at
                                              > > WU may not be correct. The are actually pointing to Dearing,
                                              Kansas.
                                              > >
                                              > > If I pull up the forecast page for Saint Anne, Illinois:
                                              > >
                                              > >
                                              > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                              query=Saint+Anne%2C+IL#History
                                              > >
                                              > > The station is not listed.
                                              > >
                                              > > I can pull up the station history:
                                              > >
                                              > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?
                                              ID=KILSAINT2
                                              > >
                                              > > When I click the 'View Full Conditions and Forecast' on the
                                              history page,
                                              > > I end up here:
                                              > >
                                              > >
                                              > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                              query=37.062%2C-95.677
                                              > >
                                              > > I believe the latitude and longitude entered for the station are
                                              not
                                              > > correct.
                                              > >
                                              > > Lat: N 37 ° 3 ' 45 '' ( 37.062 ° )
                                              > > Lon: W 95 ° 40 ' 37 '' ( -95.677 ° )
                                              > >
                                              > > A quick way to get your latitude and longitude is to pull up:
                                              > >
                                              > > http://terraserver.homeadvisor.msn.com
                                              > >
                                              > > Enter your street address, city and state. When you git go you
                                              can chose
                                              > > either the topo or aerial map. Choose topo.
                                              > >
                                              > > When the next screen is displayed, the URL at the top will look
                                              something
                                              > > like this:
                                              > >
                                              > > http://terraserver.homeadvisor.msn.com/image.aspx?t=2&s=11&ALon=*
                                              > > -
                                              83.79587400*&ALat=*42.52875700*<http://terraserver.homeadvisor.msn.co
                                              m/image.aspx?t=2&s=11&ALon=-83.79587400&ALat=42.52875700>
                                              > > ...
                                              > >
                                              > > Get the numbers that are associated with Alon and ALat
                                              > >
                                              > > So the data you would need is:
                                              > >
                                              > > Lat: *42.52875700*
                                              > >
                                              > > Lon: *-83.79587400*
                                              > >
                                              > > Once you have the correct numbers, copy and paste them in the 'My
                                              > > Stations' page back at Weather Underground.
                                              > >
                                              > > ---
                                              > >
                                              > > To John,
                                              > >
                                              > > What is interesting to note here is that when you pull up the
                                              page:
                                              > >
                                              > >
                                              > > http://www.wunderground.com/cgi-bin/findweather/getForecast?
                                              query=37.062%2C-95.677
                                              > >
                                              > > There are stations listed from all over the country.
                                              > >
                                              > > I suspect that there is a default latitude and longitude being
                                              loaded in
                                              > > the 'My Stations' new user signup??
                                              > >
                                              > > ---
                                              > >
                                              > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                              > > <sun_spot_mom@> wrote:
                                              > > >
                                              > > > Okay, I checked and I changed Saint to St. (maybe it likes that
                                              > > > better?) How long should it take to show up?
                                              > > >
                                              > > > Thanks
                                              > > > Kathy
                                              > > >
                                              > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                              > > > wuhu_software@ wrote:
                                              > > > >
                                              > > > > Kathy,
                                              > > > >
                                              > > > > I can see your data but you are right, it is not coming up
                                              when
                                              > > > zip
                                              > > > > code is listed.
                                              > > > >
                                              > > > > I would check under the 'My Stations' link at the Weather
                                              > > > Underground
                                              > > > > page and verify that your zip code, city and state are
                                              entered
                                              > > > > correctly there.
                                              > > > >
                                              > > > > If everything is entered correctly and the it does not show
                                              up by
                                              > > > > tomorrow, we will need to contact Weather Underground to
                                              resolve
                                              > > > it.
                                              > > > >
                                              > > > >
                                              > > > > --- In wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                              > > > > <sun_spot_mom@> wrote:
                                              > > > > >
                                              > > > > > I am KILSAINT2.
                                              > > > > >
                                              > > > > > Thanks for checking. I guess I am supposed to be able to
                                              look
                                              > > > it
                                              > > > > up
                                              > > > > > by zipcode, right?
                                              > > > > >
                                              > > > > > Thanks
                                              > > > > > Kathy
                                              > > > > >
                                              > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
                                              > > > > > <wuhu_software@> wrote:
                                              > > > > > >
                                              > > > > > >
                                              > > > > > > Kathy,
                                              > > > > > >
                                              > > > > > > What is your WU Station ID?
                                              > > > > > >
                                              > > > > > > Tried looking it up by zipcode, did not see yours in
                                              there.
                                              > > > > > >
                                              > > > > > > There was another WUHU station but it has been uploading
                                              for
                                              > > > some
                                              > > > > > > time.
                                              > > > > > >
                                              > > > > > >
                                              > > > > > > --- In
                                              wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                              > > > > > > <sun_spot_mom@> wrote:
                                              > > > > > > >
                                              > > > > > > > Yes, I logged in and saw my data. Do I have to wait a
                                              day
                                              > > > to
                                              > > > > > see
                                              > > > > > > it
                                              > > > > > > > when I type in my zipcode?
                                              > > > > > > >
                                              > > > > > > > Thanks much.
                                              > > > > > > > :>)
                                              > > > > > > > Kathy
                                              > > > > > > >
                                              > > > > > > > --- In
                                              wuhu_software_group@yahoogroups.com, "wuhu_software"
                                              > > > > > > > <wuhu_software@> wrote:
                                              > > > > > > > >
                                              > > > > > > > >
                                              > > > > > > > > Kathy,
                                              > > > > > > > >
                                              > > > > > > > > Sounds like you are almost there...
                                              > > > > > > > >
                                              > > > > > > > > Go to the Weather Underground site and log in with
                                              your WU
                                              > > > > > email
                                              > > > > > > > and
                                              > > > > > > > > password.
                                              > > > > > > > >
                                              > > > > > > > > Once you are logged in, there is a "My Stations"
                                              link.
                                              > > > Click
                                              > > > > > it.
                                              > > > > > > > >
                                              > > > > > > > > On the next page you will see something like:
                                              > > > > > > > >
                                              > > > > > > > > Current Stations
                                              > > > > > > > > ID: KMI????? | data
                                              > > > > > > > >
                                              > > > > > > > > Your station id follows ID:
                                              > > > > > > > >
                                              > > > > > > > > The password entered in to WUHU is the same as you
                                              use for
                                              > > > > > your
                                              > > > > > > > > normal WU account. It *is* case sensitive.
                                              > > > > > > > >
                                              > > > > > > > >
                                              > > > > > > > > --- In
                                              wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                              > > > > > > > > <sun_spot_mom@> wrote:
                                              > > > > > > > > >
                                              > > > > > > > > > I do believe that it will work now (except for a
                                              minor
                                              > > > > > problem,
                                              > > > > > > I
                                              > > > > > > > > > don't think I know my ID, duh). Where do I locate
                                              my PWS
                                              > > > > ID?
                                              > > > > > > I've
                                              > > > > > > > > > been looking at the member settings and do not see
                                              it.
                                              > > > I
                                              > > > > > think
                                              > > > > > > > its
                                              > > > > > > > > > KIL something... I was using my "handle" for the
                                              ID.
                                              > > > > > > > > >
                                              > > > > > > > > > My gauges are showing activity. I just need to see
                                              it
                                              > > > > > upload.
                                              > > > > > > > > > The problem was during the install of wuhu I chose
                                              to
                                              > > > > > install
                                              > > > > > > in
                                              > > > > > > > > > d:\ . Since it asked I thought it would be okay to
                                              put
                                              > > > it
                                              > > > > > > > there.
                                              > > > > > > > > >
                                              > > > > > > > > > Check out the weather for 60964 coming soon!
                                              > > > > > > > > >
                                              > > > > > > > > > Thanks again.
                                              > > > > > > > > > Kathy
                                              > > > > > > > > >
                                              > > > > > > > > >
                                              > > > > > > > > >
                                              > > > > > > > > > --- In
                                              > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                              > > > > > > > > > <wuhu_software@> wrote:
                                              > > > > > > > > > >
                                              > > > > > > > > > > Kathy,
                                              > > > > > > > > > >
                                              > > > > > > > > > > I am not sure which console you have but the
                                              next few
                                              > > > > > > > paragraphs
                                              > > > > > > > > > > assume you are using a WS-23XX type station.
                                              > > > > > > > > > >
                                              > > > > > > > > > > There are a couple of methods you can use to
                                              have WUHU
                                              > > > > > > > intercept
                                              > > > > > > > > > data
                                              > > > > > > > > > > from the console.
                                              > > > > > > > > > >
                                              > > > > > > > > > > The first is quite easy. You run Heavyweather
                                              Beta 2.0
                                              > > > > > (newer
                                              > > > > > > > > than
                                              > > > > > > > > > > the version that ships on CD), you run WUHU, it
                                              > > > monitors
                                              > > > > a
                                              > > > > > > file
                                              > > > > > > > > > > called currdat.lst (stored in C:\Heavyweather).
                                              > > > > > Heavweather
                                              > > > > > > and
                                              > > > > > > > > > WUHU
                                              > > > > > > > > > > must be run at all times otherwise WUHU will not
                                              > > > receive
                                              > > > > > the
                                              > > > > > > > > > > currdat.lst file updates. That method is fine if
                                              you
                                              > > > > > insist
                                              > > > > > > on
                                              > > > > > > > > > > running Heavyweather. Personally, I think
                                              Heavyweather
                                              > > > is
                                              > > > > > a
                                              > > > > > > CPU
                                              > > > > > > > > hog
                                              > > > > > > > > > > (can easily chew up 20-30% of your processor
                                              even when
                                              > > > > > idle)
                                              > > > > > > so
                                              > > > > > > > I
                                              > > > > > > > > > do
                                              > > > > > > > > > > not run it.
                                              > > > > > > > > > >
                                              > > > > > > > > > > If you run wired mode (wire between the console
                                              and
                                              > > > the
                                              > > > > > > remote
                                              > > > > > > > > > thermo
                                              > > > > > > > > > > unit), your weather data can be updated every 10
                                              > > > seconds
                                              > > > > > or
                                              > > > > > > so.
                                              > > > > > > > > In
                                              > > > > > > > > > > this case, you would probably want to run WUHU in
                                              > > > direct
                                              > > > > > > serial
                                              > > > > > > > > > > communications mode. If you are running wireless
                                              mode
                                              > > > (no
                                              > > > > > > wire
                                              > > > > > > > > > > between the console and remote thermo unit), your
                                              > > > weather
                                              > > > > > > data
                                              > > > > > > > > will
                                              > > > > > > > > > > only be updated once per minute regardless of the
                                              > > > > software
                                              > > > > > > > > > > combination you choose.
                                              > > > > > > > > > >
                                              > > > > > > > > > > When you run WUHU in direct serial mode, you must
                                              > > > > > terminate
                                              > > > > > > the
                                              > > > > > > > > > > Heavyweather application. When you choose this
                                              method,
                                              > > > > you
                                              > > > > > > must
                                              > > > > > > > > hit
                                              > > > > > > > > > > Stop on WUHU so you can make changes to the
                                              settings.
                                              > > > In
                                              > > > > > the
                                              > > > > > > > > > general
                                              > > > > > > > > > > settings, there is a pulldown combo box. You can
                                              > > > > > select "WS-
                                              > > > > > > > 23XX
                                              > > > > > > > > > > Direct Serial Access", then to the right of the
                                              combo
                                              > > > > box,
                                              > > > > > > > select
                                              > > > > > > > > > the
                                              > > > > > > > > > > communications port that the console is hooked
                                              up to.
                                              > > > > Once
                                              > > > > > > the
                                              > > > > > > > > > > changes are made, you hit start. WUHU will then
                                              manage
                                              > > > > the
                                              > > > > > > > > > > communications with the console.
                                              > > > > > > > > > >
                                              > > > > > > > > > > If you have a WS-36XX type station, WUHU does not
                                              > > > support
                                              > > > > > > > direct
                                              > > > > > > > > > > serial communications at this time so you must
                                              run the
                                              > > > > > > > > Heavyweather
                                              > > > > > > > > > > Pro application. Like Heavyweather Beta 2.0, this
                                              > > > > > application
                                              > > > > > > > > will
                                              > > > > > > > > > > write to the currdat.lst file once per minute.
                                              As with
                                              > > > > the
                                              > > > > > > > first
                                              > > > > > > > > > > method, Heavyweather Pro and WUHU must be
                                              running at
                                              > > > all
                                              > > > > > > times.
                                              > > > > > > > > > >
                                              > > > > > > > > > > Well, that is the long answer. I hope things are
                                              a bit
                                              > > > > > > clearer
                                              > > > > > > > > now.
                                              > > > > > > > > > >
                                              > > > > > > > > > >
                                              > > > > > > > > > > --- In
                                              > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                              > > > > > > > > > > <sun_spot_mom@> wrote:
                                              > > > > > > > > > > >
                                              > > > > > > > > > > > Okay!! That worked...and interestingly IE7
                                              still
                                              > > > > works,
                                              > > > > > > > > although
                                              > > > > > > > > > > it
                                              > > > > > > > > > > > seems slower.
                                              > > > > > > > > > > > So, now I have it installed, not sure if it's
                                              > > > getting
                                              > > > > > the
                                              > > > > > > > > > readings,
                                              > > > > > > > > > > > tho. My gauges don't show anything. I did turn
                                              on
                                              > > > > > logging
                                              > > > > > > to
                                              > > > > > > > > > show
                                              > > > > > > > > > > > uploads and console comm. errors. I'm not
                                              seeing
                                              > > > much
                                              > > > > in
                                              > > > > > > > there
                                              > > > > > > > > as
                                              > > > > > > > > > > > yet.
                                              > > > > > > > > > > >
                                              > > > > > > > > > > > Perhaps some tips here would help?
                                              > > > > > > > > > > >
                                              > > > > > > > > > > > I will look at more again maybe tomorrow. I am
                                              > > > tired
                                              > > > > > after
                                              > > > > > > > > > > bringing
                                              > > > > > > > > > > > in the new year.
                                              > > > > > > > > > > >
                                              > > > > > > > > > > > Happy New Year!
                                              > > > > > > > > > > > Thanks for your help.
                                              > > > > > > > > > > > Kathy
                                              > > > > > > > > > > >
                                              > > > > > > > > > > > --- In
                                              wuhu_software_group@yahoogroups.com, "<<<<<
                                              > > > > > Dickie
                                              > > > > > > > > > Bradford
                                              > > > > > > > > > > > >>>>>" <dbradford@> wrote:
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > I had this problem a few days ago with
                                              windows
                                              > > > 2000,
                                              > > > > > I
                                              > > > > > > had
                                              > > > > > > > a
                                              > > > > > > > > > > > printer
                                              > > > > > > > > > > > > installed and everytime i started WUHU it
                                              said I
                                              > > > > > needed
                                              > > > > > > a
                                              > > > > > > > > > > printer,
                                              > > > > > > > > > > > what I
                                              > > > > > > > > > > > > did was deleted the printer, rebooted and
                                              > > > reinstalled
                                              > > > > > the
                                              > > > > > > > > > printer
                                              > > > > > > > > > > > again and
                                              > > > > > > > > > > > > the reinstalled WUHU and it has not acted up
                                              > > > since.
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > Dickie
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > -----Original Message-----
                                              > > > > > > > > > > > > From: wuhu_software_group@yahoogroups.com
                                              > > > > > > > > > > > > [mailto:wuhu_software_group@yahoogroups.com]
                                              On
                                              > > > Behalf
                                              > > > > > Of
                                              > > > > > > > > > > > sun_spot_mom
                                              > > > > > > > > > > > > Sent: Monday, January 01, 2007 8:04 PM
                                              > > > > > > > > > > > > To: wuhu_software_group@yahoogroups.com
                                              > > > > > > > > > > > > Subject: [wuhu_software_group] Re: Error
                                              > > > installing
                                              > > > > > wuhu
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > It could all be IE7 related...
                                              > > > > > > > > > > > > When I said to go ahead and install IE7, I
                                              had
                                              > > > > > problems
                                              > > > > > > > > > > > connecting.
                                              > > > > > > > > > > > > I went through all services and stuff in
                                              startup
                                              > > > > and
                                              > > > > > it
                                              > > > > > > > > > > appeared
                                              > > > > > > > > > > > that
                                              > > > > > > > > > > > > my camera & printer services interfere with
                                              IE7,
                                              > > > so
                                              > > > > > I
                                              > > > > > > > > stopped
                                              > > > > > > > > > > them
                                              > > > > > > > > > > > > from loading. I will try loading them and
                                              > > > > restarting
                                              > > > > > > and
                                              > > > > > > > > then
                                              > > > > > > > > > > try
                                              > > > > > > > > > > > > the install again.
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > I also did not see version 213 anywhere. I
                                              only
                                              > > > > > tried
                                              > > > > > > 212
                                              > > > > > > > &
                                              > > > > > > > > > 214.
                                              > > > > > > > > > > > > Where is 213?
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > Thanks
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > > > --- In
                                              > > > wuhu_software_group@yahoogroups.com, "Brian"
                                              > > > > > > > > <yahoo@>
                                              > > > > > > > > > > > wrote:
                                              > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > I was getting the same error when WUHU
                                              would
                                              > > > try
                                              > > > > > to
                                              > > > > > > > load
                                              > > > > > > > > at
                                              > > > > > > > > > > > Windows
                                              > > > > > > > > > > > > > startup. Never really got it resolved
                                              (thought
                                              > > > I
                                              > > > > > did,
                                              > > > > > > > but
                                              > > > > > > > > it
                                              > > > > > > > > > > > > > returned). I figured it was just my
                                              machine. I
                                              > > > do
                                              > > > > > > have
                                              > > > > > > > a
                                              > > > > > > > > > > printer
                                              > > > > > > > > > > > > > installed...I wonder if my printer wasn't
                                              > > > loading
                                              > > > > > at
                                              > > > > > > > > > startup
                                              > > > > > > > > > > > prior
                                              > > > > > > > > > > > > > to WUHU, therefore it was not recognizing
                                              it?
                                              > > > I
                                              > > > > > was
                                              > > > > > > > using
                                              > > > > > > > > > > > version
                                              > > > > > > > > > > > > > 214.
                                              > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > I actually decided to try uninstalling 214
                                              and
                                              > > > > > trying
                                              > > > > > > > > 213.
                                              > > > > > > > > > The
                                              > > > > > > > > > > > > > problem seemed to go away. My other problem
                                              > > > > > (serial
                                              > > > > > > > port
                                              > > > > > > > > > > issue
                                              > > > > > > > > > > > with
                                              > > > > > > > > > > > > > console stopping communication with
                                              computer
                                              > > > and
                                              > > > > > > serial
                                              > > > > > > > > port
                                              > > > > > > > > > > > > > indicating it was in use) seemed to go away
                                              > > > when
                                              > > > > I
                                              > > > > > > went
                                              > > > > > > > > > back
                                              > > > > > > > > > > to
                                              > > > > > > > > > > > > 213.
                                              > > > > > > > > > > > > > Can't say for sure though. I will say it
                                              has
                                              > > > been
                                              > > > > > > > almost
                                              > > > > > > > > a
                                              > > > > > > > > > > day
                                              > > > > > > > > > > > now
                                              > > > > > > > > > > > > > without the problems and the problems did
                                              seem
                                              > > > to
                                              > > > > > > start
                                              > > > > > > > > > when I
                                              > > > > > > > > > > > > > installed V214.
                                              > > > > > > > > > > > > >
                                              > > > > > > > > > > > > >
                                              > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > --- In
                                              > > > > > > > > wuhu_software_group@yahoogroups.com, "wuhu_software"
                                              > > > > > > > > > > > > > <wuhu_software@> wrote:
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > You must have a printer defined on the
                                              > > > machine
                                              > > > > > to
                                              > > > > > > > > install
                                              > > > > > > > > > > > WUHU.
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > Go to your control panel, click printers.
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > If you do not have one defined, add
                                              printer.
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > --- In
                                              > > > > > > > > wuhu_software_group@yahoogroups.com, "sun_spot_mom"
                                              > > > > > > > > > > > > > > <sun_spot_mom@> wrote:
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > Please help.
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > When I run install.exe I am getting:
                                              > > > > > > > > > > > > > > > error
                                              > > > > > > > > > > > > > > > Runtime error 217 at 00021AEE
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > Then:
                                              > > > > > > > > > > > > > > > WUHU setup
                                              > > > > > > > > > > > > > > > An error occurred during the move data
                                              > > > > > process: -
                                              > > > > > > 119
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > Component: DLLs
                                              > > > > > > > > > > > > > > > File group: program DLLs
                                              > > > > > > > > > > > > > > > File: D:\program
                                              files\wuhu\teechart.ocx
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > I have tried both versions of the
                                              download
                                              > > > > > files:
                                              > > > > > > > the
                                              > > > > > > > > > 212
                                              > > > > > > > > > > &
                                              > > > > > > > > > > > 214
                                              > > > > > > > > > > > > > > > versions and I get the same messages.
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > I'm trying to get my LaCrosse 2315 to
                                              > > > upload
                                              > > > > > to
                                              > > > > > > > > > > > wunderground.
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > I have IE7, is that a problem?
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > > > Thanks in advance.
                                              > > > > > > > > > > > > > > > Kathy
                                              > > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > > >
                                              > > > > > > > > > > > > >
                                              > > > > > > > > > > > >
                                              > > > > > > > > > > >
                                              > > > > > > > > > >
                                              > > > > > > > > >
                                              > > > > > > > >
                                              > > > > > > >
                                              > > > > > >
                                              > > > > >
                                              > > > >
                                              > > >
                                              > >
                                              > >
                                              > >
                                              >
                                              >
                                              >
                                              > --
                                              > ============================================================
                                              > John Celenza
                                              > Director of Weather Technology
                                              > Phone (415) 543-5022 x105
                                              > FAX (415) 543-5044
                                              > john@...
                                              > ============================================================
                                              >
                                            Your message has been successfully submitted and would be delivered to recipients shortly.