- Hello Miguel,

From what you have given, I would say that your temperature is

roughly a couple of degrees cooler than the analysis temperature.

The way I roughly calculate the tweak is to calculate a percentage.

Degree Offset / Average Temperature

So lets say you want to increase by 2 degrees and the average is 70.

2 / 70 = 0.0286

Then, add 1 to that value,

1.0286

Enter that value in the temperature tweak setting and check it in a

couple of days.

You can never really eliminate the error, the best you can hope for

is a happy medium.

--- In wuhu_software_group@yahoogroups.com, "w4mod" <w4mod@y...>

wrote:>

the

> ok, this is my problem, on the report that I get every night this

> comes up:

>

> 24 hours Day time Night time

> Average temperature error -2.8 °F -4.2 °F -1.9 °F

> Error standard deviation 1.9 °F 2.1 °F 1.1 °F

> Worst average temperature error -4.8 °F -6.5 °F -2.7 °F

> Worst standard deviation 3.6 °F 2.3 °F 1.8 °F

>

>

> NOTE: If the error above is POSITIVE, then it means that the

> analysis temperature is HIGHER than the reported temperature. This

> means that your sensor is reading COLDER than expected.

>

>

> So, I want to correct that, everything else is working good, but

> actual temperature,, how much should I tweak the data??

>

> Thanks

>

> Miguel, w4mod

> - I will try that and see what happens,,,

I got everything else working good ... so hopefully this will work

out and I go from there.

Thanks

Miguel, w4mod

--- In wuhu_software_group@yahoogroups.com, "wuhu_software"

<wuhu_software@y...> wrote:>

70.

>

> Hello Miguel,

>

> From what you have given, I would say that your temperature is

> roughly a couple of degrees cooler than the analysis temperature.

>

> The way I roughly calculate the tweak is to calculate a percentage.

>

> Degree Offset / Average Temperature

>

> So lets say you want to increase by 2 degrees and the average is

>

a

> 2 / 70 = 0.0286

>

> Then, add 1 to that value,

>

> 1.0286

>

> Enter that value in the temperature tweak setting and check it in

> couple of days.

for

>

> You can never really eliminate the error, the best you can hope

> is a happy medium.

this

>

> --- In wuhu_software_group@yahoogroups.com, "w4mod" <w4mod@y...>

> wrote:

> >

> > ok, this is my problem, on the report that I get every night

> > comes up:

This

> >

> > 24 hours Day time Night time

> > Average temperature error -2.8 °F -4.2 °F -1.9 °F

> > Error standard deviation 1.9 °F 2.1 °F 1.1 °F

> > Worst average temperature error -4.8 °F -6.5 °F -2.7 °F

> > Worst standard deviation 3.6 °F 2.3 °F 1.8 °F

> >

> >

> > NOTE: If the error above is POSITIVE, then it means that the

> > analysis temperature is HIGHER than the reported temperature.

> > means that your sensor is reading COLDER than expected.

> >

> >

> > So, I want to correct that, everything else is working good, but

> the

> > actual temperature,, how much should I tweak the data??

> >

> > Thanks

> >

> > Miguel, w4mod

> >

>