Re: Wind Speed
There are several checks that are done.
One is the overall range check, which according to the documentation
is 114.1 mph for either the WS23xx or WS36xx, I cannot remember which.
Then there is the maximum allowable wind speed that is in the tweaks
dialog. If the wind exceeds that number, it is rejected (as you
mentioned you set yours to 75).
Also, there is a rejection of known bad wind speeds that have been
seen by users. If you enable that check, those questionable readings
cause all of the data to be rejected on that read.
Glad to hear the error checking is paying off.
--- In email@example.com, "steve_03222"
> I received my fist wind speed error correction.
> Sat Apr 29 19:15:16 2006 > Wind speed reading of 114.1 mph
> Value out of range (0 to 111.8).up
> No clue why, I am wired and no other issues noted.
> Checked the new Heavyweather Pro history file and it did not show
> there either.
> Nice to have built in error proofing, nice job WUHU Software.
> One question though, it shows Value out of range 0 to 111.8, I have
> mine set at 75 MPH.