Loading ...
Sorry, an error occurred while loading the content.
 

Re: Communication with WX Station

Expand Messages
  • Edith
    What should com port settings be/ Thanks! Edith
    Message 1 of 4 , Oct 7, 2013
      What should com port settings be/
      Thanks!
      Edith

      --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@...> wrote:
      >
      > Mike,
      >
      > Go to the general settings and verify that the station type and selected COM port settings are correct. If these settings are not correct go to the main screen, click the Stop button and then go back in to the settings and change them. On the main screen hit the start button again.
      >
      > Once running, go to the log screen and check Show Console Com. Errors. See what data collects in the log and whether there is an obvious problem.
      >
      >
    • wuhu_software
      What kind of station do you have? There are only a couple of different stations that use a serial port and as I recall the baud rate for those is selected
      Message 2 of 4 , Oct 7, 2013

        What kind of station do you have?


        There are only a couple of different stations that use a serial port and as I recall the baud rate for those is selected automatically.




        ---In wuhu_software_group@yahoogroups.com, <wuhu_software_group@yahoogroups.com> wrote:

        What should com port settings be/
        Thanks!
        Edith

        --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@...> wrote:
        >
        > Mike,
        >
        > Go to the general settings and verify that the station type and selected COM port settings are correct. If these settings are not correct go to the main screen, click the Stop button and then go back in to the settings and change them. On the main screen hit the start button again.
        >
        > Once running, go to the log screen and check Show Console Com. Errors. See what data collects in the log and whether there is an obvious problem.
        >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.