Loading ...
Sorry, an error occurred while loading the content.

Re: Newbie Question about Davis Vantage Pro2 with WUHU

Expand Messages
  • Tom Wassmer
    ... Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in
    Message 1 of 18 , May 1, 2012
    • 0 Attachment
      --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
      > 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.

      Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?


      > 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.

      I don't care about the format as long as it is easy to export and use in any plotting program.


      > 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.

      Thanks. I will try.

      Best, Tom


      >
      >
      > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <tom@> wrote:
      > >
      > > Hi everybody,
      > >
      > > I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
      > > 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
      > > 2.) The log function records some things that I am not sure if they are error messages or just status reports:
      > >
      > > Tue May 01 13:02:33 2012 > Console clock time: Tue May 01 13:01:00 2012.
      > > Tue May 01 13:02:33 2012 > Console Battery Voltage: 4.69
      > > Tue May 01 13:02:33 2012 > All transmitter batteries are Ok.
      > > Tue May 01 13:02:33 2012 > All repeater batteries are Ok.
      > > Tue May 01 13:02:35 2012 > Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
      > > Tue May 01 13:02:38 2012 > Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
      > > Tue May 01 13:02:38 2012 > Retrieving outdoor temperature.
      > > Tue May 01 13:02:38 2012 > Retrieving indoor temperature.
      > > Tue May 01 13:02:38 2012 > Retrieving outdoor humidity.
      > > Tue May 01 13:02:38 2012 > Retrieving indoor humidity.
      > > Tue May 01 13:02:38 2012 > Retrieving outdoor dew point.
      > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind chill.
      > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind speed and direction.
      > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind gust (slow).
      > > Tue May 01 13:02:39 2012 > Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
      > > Tue May 01 13:02:39 2012 > Retrieving rainfall total.
      > > Tue May 01 13:02:39 2012 > Retrieving daily rainfall.
      > > Tue May 01 13:02:39 2012 > Retrieving relative pressure.
      > > Tue May 01 13:02:39 2012 > Retrieving absolute pressure (cached).
      > > Tue May 01 13:02:39 2012 > Retrieving solar radiation.
      > > Tue May 01 13:02:39 2012 > Retrieving solar UV.
      > > Tue May 01 13:02:39 2012 > Retrieving ET data.
      > > Tue May 01 13:02:39 2012 > Retrieving extra sensors temperature data.
      > > Tue May 01 13:02:39 2012 > Retrieving extra sensors humidity data.
      > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil temperature data.
      > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil moisture data.
      > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf temperature data.
      > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf wetness data.
      > > Tue May 01 13:02:39 2012 > All data collected successfully, post processing weather data.
      > > Tue May 01 13:02:39 2012 > Post processing weather data.
      > > Tue May 01 13:02:39 2012 > Post processing of weather succeeded.
      > > Tue May 01 13:02:39 2012 > Completed data collection routine.
      > > Tue May 01 13:02:39 2012 > Calling Read().
      > > Tue May 01 13:02:41 2012 > Read() succeeded, continuing to process.
      > > Tue May 01 13:02:42 2012 > Console clock time: Tue May 01 13:01:00 2012.
      > > Tue May 01 13:02:42 2012 > Console Battery Voltage: 4.69
      > > Tue May 01 13:02:42 2012 > All transmitter batteries are Ok.
      > > Tue May 01 13:02:42 2012 > All repeater batteries are Ok.
      > >
      > > 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
      > >
      > > Thanks soo much in advance!
      > >
      > > Tom
      > >
      >
    • wuhu_software
      Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds. The default format of the data is the La
      Message 2 of 18 , May 2, 2012
      • 0 Attachment
        Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.

        The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.

        You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.

        There are also printable charts creating within the program. If you are only after charts, that might suffice.


        --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@...> wrote:
        >
        > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
        > > 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
        >
        > Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
        >
        >
        > > 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
        >
        > I don't care about the format as long as it is easy to export and use in any plotting program.
        >
        >
        > > 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
        >
        > Thanks. I will try.
        >
        > Best, Tom
        >
        >
        > >
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <tom@> wrote:
        > > >
        > > > Hi everybody,
        > > >
        > > > I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
        > > > 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
        > > > 2.) The log function records some things that I am not sure if they are error messages or just status reports:
        > > >
        > > > Tue May 01 13:02:33 2012 > Console clock time: Tue May 01 13:01:00 2012.
        > > > Tue May 01 13:02:33 2012 > Console Battery Voltage: 4.69
        > > > Tue May 01 13:02:33 2012 > All transmitter batteries are Ok.
        > > > Tue May 01 13:02:33 2012 > All repeater batteries are Ok.
        > > > Tue May 01 13:02:35 2012 > Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
        > > > Tue May 01 13:02:38 2012 > Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
        > > > Tue May 01 13:02:38 2012 > Retrieving outdoor temperature.
        > > > Tue May 01 13:02:38 2012 > Retrieving indoor temperature.
        > > > Tue May 01 13:02:38 2012 > Retrieving outdoor humidity.
        > > > Tue May 01 13:02:38 2012 > Retrieving indoor humidity.
        > > > Tue May 01 13:02:38 2012 > Retrieving outdoor dew point.
        > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind chill.
        > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind speed and direction.
        > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind gust (slow).
        > > > Tue May 01 13:02:39 2012 > Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
        > > > Tue May 01 13:02:39 2012 > Retrieving rainfall total.
        > > > Tue May 01 13:02:39 2012 > Retrieving daily rainfall.
        > > > Tue May 01 13:02:39 2012 > Retrieving relative pressure.
        > > > Tue May 01 13:02:39 2012 > Retrieving absolute pressure (cached).
        > > > Tue May 01 13:02:39 2012 > Retrieving solar radiation.
        > > > Tue May 01 13:02:39 2012 > Retrieving solar UV.
        > > > Tue May 01 13:02:39 2012 > Retrieving ET data.
        > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors temperature data.
        > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors humidity data.
        > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil temperature data.
        > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil moisture data.
        > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf temperature data.
        > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf wetness data.
        > > > Tue May 01 13:02:39 2012 > All data collected successfully, post processing weather data.
        > > > Tue May 01 13:02:39 2012 > Post processing weather data.
        > > > Tue May 01 13:02:39 2012 > Post processing of weather succeeded.
        > > > Tue May 01 13:02:39 2012 > Completed data collection routine.
        > > > Tue May 01 13:02:39 2012 > Calling Read().
        > > > Tue May 01 13:02:41 2012 > Read() succeeded, continuing to process.
        > > > Tue May 01 13:02:42 2012 > Console clock time: Tue May 01 13:01:00 2012.
        > > > Tue May 01 13:02:42 2012 > Console Battery Voltage: 4.69
        > > > Tue May 01 13:02:42 2012 > All transmitter batteries are Ok.
        > > > Tue May 01 13:02:42 2012 > All repeater batteries are Ok.
        > > >
        > > > 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
        > > >
        > > > Thanks soo much in advance!
        > > >
        > > > Tom
        > > >
        > >
        >
      • Tom Wassmer
        Thanks, I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to
        Message 3 of 18 , May 3, 2012
        • 0 Attachment
          Thanks,

          I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...

          Thanks in advance!

          Tom

          template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
          template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
          copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
          copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"


          --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
          >
          >
          > Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
          >
          > The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
          >
          > You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
          >
          > There are also printable charts creating within the program. If you are only after charts, that might suffice.
          >
          >
          > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
          > > > 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
          > >
          > > Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
          > >
          > >
          > > > 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
          > >
          > > I don't care about the format as long as it is easy to export and use in any plotting program.
          > >
          > >
          > > > 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
          > >
          > > Thanks. I will try.
          > >
          > > Best, Tom
          > >
          > >
          > > >
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <tom@> wrote:
          > > > >
          > > > > Hi everybody,
          > > > >
          > > > > I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
          > > > > 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
          > > > > 2.) The log function records some things that I am not sure if they are error messages or just status reports:
          > > > >
          > > > > Tue May 01 13:02:33 2012 > Console clock time: Tue May 01 13:01:00 2012.
          > > > > Tue May 01 13:02:33 2012 > Console Battery Voltage: 4.69
          > > > > Tue May 01 13:02:33 2012 > All transmitter batteries are Ok.
          > > > > Tue May 01 13:02:33 2012 > All repeater batteries are Ok.
          > > > > Tue May 01 13:02:35 2012 > Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
          > > > > Tue May 01 13:02:38 2012 > Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
          > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor temperature.
          > > > > Tue May 01 13:02:38 2012 > Retrieving indoor temperature.
          > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor humidity.
          > > > > Tue May 01 13:02:38 2012 > Retrieving indoor humidity.
          > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor dew point.
          > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind chill.
          > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind speed and direction.
          > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind gust (slow).
          > > > > Tue May 01 13:02:39 2012 > Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
          > > > > Tue May 01 13:02:39 2012 > Retrieving rainfall total.
          > > > > Tue May 01 13:02:39 2012 > Retrieving daily rainfall.
          > > > > Tue May 01 13:02:39 2012 > Retrieving relative pressure.
          > > > > Tue May 01 13:02:39 2012 > Retrieving absolute pressure (cached).
          > > > > Tue May 01 13:02:39 2012 > Retrieving solar radiation.
          > > > > Tue May 01 13:02:39 2012 > Retrieving solar UV.
          > > > > Tue May 01 13:02:39 2012 > Retrieving ET data.
          > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors temperature data.
          > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors humidity data.
          > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil temperature data.
          > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil moisture data.
          > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf temperature data.
          > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf wetness data.
          > > > > Tue May 01 13:02:39 2012 > All data collected successfully, post processing weather data.
          > > > > Tue May 01 13:02:39 2012 > Post processing weather data.
          > > > > Tue May 01 13:02:39 2012 > Post processing of weather succeeded.
          > > > > Tue May 01 13:02:39 2012 > Completed data collection routine.
          > > > > Tue May 01 13:02:39 2012 > Calling Read().
          > > > > Tue May 01 13:02:41 2012 > Read() succeeded, continuing to process.
          > > > > Tue May 01 13:02:42 2012 > Console clock time: Tue May 01 13:01:00 2012.
          > > > > Tue May 01 13:02:42 2012 > Console Battery Voltage: 4.69
          > > > > Tue May 01 13:02:42 2012 > All transmitter batteries are Ok.
          > > > > Tue May 01 13:02:42 2012 > All repeater batteries are Ok.
          > > > >
          > > > > 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
          > > > >
          > > > > Thanks soo much in advance!
          > > > >
          > > > > Tom
          > > > >
          > > >
          > >
          >
        • wuhu_software
          Are the templates not working correctly? Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not
          Message 4 of 18 , May 4, 2012
          • 0 Attachment
            Are the templates not working correctly?

            Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.

            I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.

            Were the output files on w:\ created?

            You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.



            --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@...> wrote:
            >
            > Thanks,
            >
            > I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
            >
            > Thanks in advance!
            >
            > Tom
            >
            > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
            > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
            > copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
            > copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > >
            > >
            > > Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
            > >
            > > The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
            > >
            > > You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
            > >
            > > There are also printable charts creating within the program. If you are only after charts, that might suffice.
            > >
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > > > > 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
            > > >
            > > > Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
            > > >
            > > >
            > > > > 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
            > > >
            > > > I don't care about the format as long as it is easy to export and use in any plotting program.
            > > >
            > > >
            > > > > 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
            > > >
            > > > Thanks. I will try.
            > > >
            > > > Best, Tom
            > > >
            > > >
            > > > >
            > > > >
            > > > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <tom@> wrote:
            > > > > >
            > > > > > Hi everybody,
            > > > > >
            > > > > > I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
            > > > > > 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
            > > > > > 2.) The log function records some things that I am not sure if they are error messages or just status reports:
            > > > > >
            > > > > > Tue May 01 13:02:33 2012 > Console clock time: Tue May 01 13:01:00 2012.
            > > > > > Tue May 01 13:02:33 2012 > Console Battery Voltage: 4.69
            > > > > > Tue May 01 13:02:33 2012 > All transmitter batteries are Ok.
            > > > > > Tue May 01 13:02:33 2012 > All repeater batteries are Ok.
            > > > > > Tue May 01 13:02:35 2012 > Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
            > > > > > Tue May 01 13:02:38 2012 > Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor temperature.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving indoor temperature.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor humidity.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving indoor humidity.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor dew point.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind chill.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind speed and direction.
            > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind gust (slow).
            > > > > > Tue May 01 13:02:39 2012 > Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving rainfall total.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving daily rainfall.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving relative pressure.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving absolute pressure (cached).
            > > > > > Tue May 01 13:02:39 2012 > Retrieving solar radiation.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving solar UV.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving ET data.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors temperature data.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors humidity data.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil temperature data.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil moisture data.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf temperature data.
            > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf wetness data.
            > > > > > Tue May 01 13:02:39 2012 > All data collected successfully, post processing weather data.
            > > > > > Tue May 01 13:02:39 2012 > Post processing weather data.
            > > > > > Tue May 01 13:02:39 2012 > Post processing of weather succeeded.
            > > > > > Tue May 01 13:02:39 2012 > Completed data collection routine.
            > > > > > Tue May 01 13:02:39 2012 > Calling Read().
            > > > > > Tue May 01 13:02:41 2012 > Read() succeeded, continuing to process.
            > > > > > Tue May 01 13:02:42 2012 > Console clock time: Tue May 01 13:01:00 2012.
            > > > > > Tue May 01 13:02:42 2012 > Console Battery Voltage: 4.69
            > > > > > Tue May 01 13:02:42 2012 > All transmitter batteries are Ok.
            > > > > > Tue May 01 13:02:42 2012 > All repeater batteries are Ok.
            > > > > >
            > > > > > 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
            > > > > >
            > > > > > Thanks soo much in advance!
            > > > > >
            > > > > > Tom
            > > > > >
            > > > >
            > > >
            > >
            >
          • Tom Wassmer
            Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a
            Message 5 of 18 , May 4, 2012
            • 0 Attachment
              Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?

              Thanks, Tom


              --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
              >
              >
              > Are the templates not working correctly?
              >
              > Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
              >
              > I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
              >
              > Were the output files on w:\ created?
              >
              > You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
              >
              >
              >
              > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
              > >
              > > Thanks,
              > >
              > > I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
              > >
              > > Thanks in advance!
              > >
              > > Tom
              > >
              > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
              > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
              > > copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
              > > copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
              > >
              > >
              > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > >
              > > >
              > > > Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
              > > >
              > > > The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
              > > >
              > > > You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
              > > >
              > > > There are also printable charts creating within the program. If you are only after charts, that might suffice.
              > > >
              > > >
              > > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
              > > > >
              > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > > > > 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
              > > > >
              > > > > Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
              > > > >
              > > > >
              > > > > > 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
              > > > >
              > > > > I don't care about the format as long as it is easy to export and use in any plotting program.
              > > > >
              > > > >
              > > > > > 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
              > > > >
              > > > > Thanks. I will try.
              > > > >
              > > > > Best, Tom
              > > > >
              > > > >
              > > > > >
              > > > > >
              > > > > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <tom@> wrote:
              > > > > > >
              > > > > > > Hi everybody,
              > > > > > >
              > > > > > > I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
              > > > > > > 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
              > > > > > > 2.) The log function records some things that I am not sure if they are error messages or just status reports:
              > > > > > >
              > > > > > > Tue May 01 13:02:33 2012 > Console clock time: Tue May 01 13:01:00 2012.
              > > > > > > Tue May 01 13:02:33 2012 > Console Battery Voltage: 4.69
              > > > > > > Tue May 01 13:02:33 2012 > All transmitter batteries are Ok.
              > > > > > > Tue May 01 13:02:33 2012 > All repeater batteries are Ok.
              > > > > > > Tue May 01 13:02:35 2012 > Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
              > > > > > > Tue May 01 13:02:38 2012 > Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor temperature.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving indoor temperature.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor humidity.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving indoor humidity.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor dew point.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind chill.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind speed and direction.
              > > > > > > Tue May 01 13:02:38 2012 > Retrieving outdoor wind gust (slow).
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving rainfall total.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving daily rainfall.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving relative pressure.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving absolute pressure (cached).
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving solar radiation.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving solar UV.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving ET data.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors temperature data.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors humidity data.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil temperature data.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors soil moisture data.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf temperature data.
              > > > > > > Tue May 01 13:02:39 2012 > Retrieving extra sensors leaf wetness data.
              > > > > > > Tue May 01 13:02:39 2012 > All data collected successfully, post processing weather data.
              > > > > > > Tue May 01 13:02:39 2012 > Post processing weather data.
              > > > > > > Tue May 01 13:02:39 2012 > Post processing of weather succeeded.
              > > > > > > Tue May 01 13:02:39 2012 > Completed data collection routine.
              > > > > > > Tue May 01 13:02:39 2012 > Calling Read().
              > > > > > > Tue May 01 13:02:41 2012 > Read() succeeded, continuing to process.
              > > > > > > Tue May 01 13:02:42 2012 > Console clock time: Tue May 01 13:01:00 2012.
              > > > > > > Tue May 01 13:02:42 2012 > Console Battery Voltage: 4.69
              > > > > > > Tue May 01 13:02:42 2012 > All transmitter batteries are Ok.
              > > > > > > Tue May 01 13:02:42 2012 > All repeater batteries are Ok.
              > > > > > >
              > > > > > > 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
              > > > > > >
              > > > > > > Thanks soo much in advance!
              > > > > > >
              > > > > > > Tom
              > > > > > >
              > > > > >
              > > > >
              > > >
              > >
              >
            • John Liss
              Hey Tom, That s because the line that contains template: generates your data file. Another way of putting it is the template: command creates the data.csv
              Message 6 of 18 , May 4, 2012
              • 0 Attachment
                Hey Tom,

                That's because the line that contains 'template:' generates your data file.
                Another way of putting it is the 'template:' command creates the data.csv

                You don't need to copy it to W: if it is being created on W:

                Try just:

                template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"


                The + on the data.csv means it will keep adding data to that file.
                The highsandlows.txt is a template to create a html page.

                Next step is make sure you have turned on Alerts/Actions.
                http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/

                -John

                On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                >
                > Thanks, Tom
                >
                >
                > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@...> wrote:
                >>
                >> Are the templates not working correctly?
                >>
                >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                >>
                >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                >>
                >> Were the output files on w:\ created?
                >>
                >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                >>
                >>
                >>
                >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                >>> Thanks,
                >>>
                >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                >>>
                >>> Thanks in advance!
                >>>
                >>> Tom
                >>>
                >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                >>>
                >>>
                >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                >>>>
                >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                >>>>
                >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                >>>>
                >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                >>>>
                >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                >>>>
                >>>>
                >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                >>>>>
                >>>>>
                >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                >>>>>
                >>>>>
                >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                >>>>> Thanks. I will try.
                >>>>>
                >>>>> Best, Tom
                >>>>>
                >>>>>
                >>>>>>
                >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                >>>>>>> Hi everybody,
                >>>>>>>
                >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                >>>>>>>
                >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                >>>>>>>
                >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                >>>>>>>
                >>>>>>> Thanks soo much in advance!
                >>>>>>>
                >>>>>>> Tom
                >>>>>>>
                >
                >
                >
                > ------------------------------------
                >
                > To visit your group on the web, go to:
                > http://groups.yahoo.com/group/wuhu_software_group/
                >
                > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                >
                > To unsubscribe from this group, send an email to:
                > wuhu_software_group-unsubscribe@yahoogroups.com
                >
                > WUHU Download page:
                > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                >
                >
                >
              • Tom Wassmer
                Hi John, I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files. Thanks
                Message 7 of 18 , May 5, 2012
                • 0 Attachment
                  Hi John,

                  I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.

                  Thanks in advance!

                  Tom

                  P.S. How can I upload these files?



                  --- In wuhu_software_group@yahoogroups.com, John Liss <john@...> wrote:
                  >
                  > Hey Tom,
                  >
                  > That's because the line that contains 'template:' generates your data file.
                  > Another way of putting it is the 'template:' command creates the data.csv
                  >
                  > You don't need to copy it to W: if it is being created on W:
                  >
                  > Try just:
                  >
                  > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                  > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                  >
                  >
                  > The + on the data.csv means it will keep adding data to that file.
                  > The highsandlows.txt is a template to create a html page.
                  >
                  > Next step is make sure you have turned on Alerts/Actions.
                  > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                  >
                  > -John
                  >
                  > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                  > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                  > >
                  > > Thanks, Tom
                  > >
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                  > >>
                  > >> Are the templates not working correctly?
                  > >>
                  > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                  > >>
                  > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                  > >>
                  > >> Were the output files on w:\ created?
                  > >>
                  > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                  > >>
                  > >>
                  > >>
                  > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                  > >>> Thanks,
                  > >>>
                  > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                  > >>>
                  > >>> Thanks in advance!
                  > >>>
                  > >>> Tom
                  > >>>
                  > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                  > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                  > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                  > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                  > >>>
                  > >>>
                  > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                  > >>>>
                  > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                  > >>>>
                  > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                  > >>>>
                  > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                  > >>>>
                  > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                  > >>>>
                  > >>>>
                  > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                  > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                  > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                  > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                  > >>>>>
                  > >>>>>
                  > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                  > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                  > >>>>>
                  > >>>>>
                  > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                  > >>>>> Thanks. I will try.
                  > >>>>>
                  > >>>>> Best, Tom
                  > >>>>>
                  > >>>>>
                  > >>>>>>
                  > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                  > >>>>>>> Hi everybody,
                  > >>>>>>>
                  > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                  > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                  > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                  > >>>>>>>
                  > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                  > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                  > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                  > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                  > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                  > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                  > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                  > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                  > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                  > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                  > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                  > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                  > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                  > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                  > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                  > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                  > >>>>>>>
                  > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                  > >>>>>>>
                  > >>>>>>> Thanks soo much in advance!
                  > >>>>>>>
                  > >>>>>>> Tom
                  > >>>>>>>
                  > >
                  > >
                  > >
                  > > ------------------------------------
                  > >
                  > > To visit your group on the web, go to:
                  > > http://groups.yahoo.com/group/wuhu_software_group/
                  > >
                  > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                  > >
                  > > To unsubscribe from this group, send an email to:
                  > > wuhu_software_group-unsubscribe@yahoogroups.com
                  > >
                  > > WUHU Download page:
                  > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                  > >
                  > >
                  > >
                  >
                • H. Smith
                  Tom, I do not see your attachments. You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder.
                  Message 8 of 18 , May 6, 2012
                  • 0 Attachment

                    Tom,

                    I do not see your attachments.

                    You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.

                    As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.



                    From: Tom Wassmer <twassmer@...>
                    To: wuhu_software_group@yahoogroups.com
                    Sent: Saturday, May 5, 2012 6:17 PM
                    Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU

                     
                    Hi John,

                    I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.

                    Thanks in advance!

                    Tom

                    P.S. How can I upload these files?

                    --- In wuhu_software_group@yahoogroups.com, John Liss <john@...> wrote:
                    >
                    > Hey Tom,
                    >
                    > That's because the line that contains 'template:' generates your data file.
                    > Another way of putting it is the 'template:' command creates the data.csv
                    >
                    > You don't need to copy it to W: if it is being created on W:
                    >
                    > Try just:
                    >
                    > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                    > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                    >
                    >
                    > The + on the data.csv means it will keep adding data to that file.
                    > The highsandlows.txt is a template to create a html page.
                    >
                    > Next step is make sure you have turned on Alerts/Actions.
                    > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                    >
                    > -John
                    >
                    > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                    > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                    > >
                    > > Thanks, Tom
                    > >
                    > >
                    > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                    > >>
                    > >> Are the templates not working correctly?
                    > >>
                    > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                    > >>
                    > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                    > >>
                    > >> Were the output files on w:\ created?
                    > >>
                    > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                    > >>
                    > >>
                    > >>
                    > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                    > >>> Thanks,
                    > >>>
                    > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                    > >>>
                    > >>> Thanks in advance!
                    > >>>
                    > >>> Tom
                    > >>>
                    > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                    > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                    > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                    > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                    > >>>
                    > >>>
                    > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                    > >>>>
                    > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                    > >>>>
                    > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                    > >>>>
                    > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                    > >>>>
                    > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                    > >>>>
                    > >>>>
                    > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                    > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                    > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                    > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                    > >>>>>
                    > >>>>>
                    > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                    > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                    > >>>>>
                    > >>>>>
                    > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                    > >>>>> Thanks. I will try.
                    > >>>>>
                    > >>>>> Best, Tom
                    > >>>>>
                    > >>>>>
                    > >>>>>>
                    > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                    > >>>>>>> Hi everybody,
                    > >>>>>>>
                    > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                    > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                    > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                    > >>>>>>>
                    > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                    > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                    > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                    > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                    > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                    > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                    > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                    > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                    > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                    > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                    > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                    > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                    > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                    > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                    > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                    > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                    > >>>>>>>
                    > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                    > >>>>>>>
                    > >>>>>>> Thanks soo much in advance!
                    > >>>>>>>
                    > >>>>>>> Tom
                    > >>>>>>>
                    > >
                    > >
                    > >
                    > > ------------------------------------
                    > >
                    > > To visit your group on the web, go to:
                    > > http://groups.yahoo.com/group/wuhu_software_group/
                    > >
                    > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                    > >
                    > > To unsubscribe from this group, send an email to:
                    > > wuhu_software_group-unsubscribe@yahoogroups.com
                    > >
                    > > WUHU Download page:
                    > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                    > >
                    > >
                    > >
                    >



                  • Tom Wassmer
                    Hi again, The created data files are in folder: http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/ They are expanded every 5
                    Message 9 of 18 , May 6, 2012
                    • 0 Attachment
                      Hi again,

                      The created data files are in folder:
                      http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/

                      They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?

                      Thanks, Tom

                      --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@...> wrote:
                      >
                      >
                      >
                      > Tom,
                      >
                      > I do not see your attachments.
                      >
                      > You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                      >
                      > As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                      >
                      >
                      >
                      > ________________________________
                      > From: Tom Wassmer <twassmer@...>
                      > To: wuhu_software_group@yahoogroups.com
                      > Sent: Saturday, May 5, 2012 6:17 PM
                      > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                      >
                      >
                      >  
                      > Hi John,
                      >
                      > I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                      >
                      > Thanks in advance!
                      >
                      > Tom
                      >
                      > P.S. How can I upload these files?
                      >
                      > --- In wuhu_software_group@yahoogroups.com, John Liss <john@> wrote:
                      > >
                      > > Hey Tom,
                      > >
                      > > That's because the line that contains 'template:' generates your data file.
                      > > Another way of putting it is the 'template:' command creates the data.csv
                      > >
                      > > You don't need to copy it to W: if it is being created on W:
                      > >
                      > > Try just:
                      > >
                      > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                      > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                      > >
                      > >
                      > > The + on the data.csv means it will keep adding data to that file.
                      > > The highsandlows.txt is a template to create a html page.
                      > >
                      > > Next step is make sure you have turned on Alerts/Actions.
                      > > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                      > >
                      > > -John
                      > >
                      > > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                      > > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                      > > >
                      > > > Thanks, Tom
                      > > >
                      > > >
                      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                      > > >>
                      > > >> Are the templates not working correctly?
                      > > >>
                      > > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                      > > >>
                      > > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                      > > >>
                      > > >> Were the output files on w:\ created?
                      > > >>
                      > > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                      > > >>
                      > > >>
                      > > >>
                      > > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                      > > >>> Thanks,
                      > > >>>
                      > > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                      > > >>>
                      > > >>> Thanks in advance!
                      > > >>>
                      > > >>> Tom
                      > > >>>
                      > > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                      > > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                      > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                      > > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                      > > >>>
                      > > >>>
                      > > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                      > > >>>>
                      > > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                      > > >>>>
                      > > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                      > > >>>>
                      > > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                      > > >>>>
                      > > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                      > > >>>>
                      > > >>>>
                      > > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                      > > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                      > > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                      > > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                      > > >>>>>
                      > > >>>>>
                      > > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                      > > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                      > > >>>>>
                      > > >>>>>
                      > > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                      > > >>>>> Thanks. I will try.
                      > > >>>>>
                      > > >>>>> Best, Tom
                      > > >>>>>
                      > > >>>>>
                      > > >>>>>>
                      > > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                      > > >>>>>>> Hi everybody,
                      > > >>>>>>>
                      > > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                      > > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                      > > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                      > > >>>>>>>
                      > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                      > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                      > > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                      > > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                      > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                      > > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                      > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                      > > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                      > > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                      > > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                      > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                      > > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                      > > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                      > > >>>>>>>
                      > > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                      > > >>>>>>>
                      > > >>>>>>> Thanks soo much in advance!
                      > > >>>>>>>
                      > > >>>>>>> Tom
                      > > >>>>>>>
                      > > >
                      > > >
                      > > >
                      > > > ------------------------------------
                      > > >
                      > > > To visit your group on the web, go to:
                      > > > http://groups.yahoo.com/group/wuhu_software_group/
                      > > >
                      > > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                      > > >
                      > > > To unsubscribe from this group, send an email to:
                      > > > wuhu_software_group-unsubscribe@yahoogroups.com
                      > > >
                      > > > WUHU Download page:
                      > > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                      > > >
                      > > >
                      > > >
                      > >
                      >
                    • Tom Wassmer
                      I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU
                      Message 10 of 18 , May 6, 2012
                      • 0 Attachment
                        I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.

                        Thanks in advance...

                        Tom

                        --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@...> wrote:
                        >
                        > Hi again,
                        >
                        > The created data files are in folder:
                        > http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                        >
                        > They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                        >
                        > Thanks, Tom
                        >
                        > --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@> wrote:
                        > >
                        > >
                        > >
                        > > Tom,
                        > >
                        > > I do not see your attachments.
                        > >
                        > > You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                        > >
                        > > As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                        > >
                        > >
                        > >
                        > > ________________________________
                        > > From: Tom Wassmer <twassmer@>
                        > > To: wuhu_software_group@yahoogroups.com
                        > > Sent: Saturday, May 5, 2012 6:17 PM
                        > > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                        > >
                        > >
                        > >  
                        > > Hi John,
                        > >
                        > > I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                        > >
                        > > Thanks in advance!
                        > >
                        > > Tom
                        > >
                        > > P.S. How can I upload these files?
                        > >
                        > > --- In wuhu_software_group@yahoogroups.com, John Liss <john@> wrote:
                        > > >
                        > > > Hey Tom,
                        > > >
                        > > > That's because the line that contains 'template:' generates your data file.
                        > > > Another way of putting it is the 'template:' command creates the data.csv
                        > > >
                        > > > You don't need to copy it to W: if it is being created on W:
                        > > >
                        > > > Try just:
                        > > >
                        > > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                        > > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                        > > >
                        > > >
                        > > > The + on the data.csv means it will keep adding data to that file.
                        > > > The highsandlows.txt is a template to create a html page.
                        > > >
                        > > > Next step is make sure you have turned on Alerts/Actions.
                        > > > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                        > > >
                        > > > -John
                        > > >
                        > > > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                        > > > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                        > > > >
                        > > > > Thanks, Tom
                        > > > >
                        > > > >
                        > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                        > > > >>
                        > > > >> Are the templates not working correctly?
                        > > > >>
                        > > > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                        > > > >>
                        > > > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                        > > > >>
                        > > > >> Were the output files on w:\ created?
                        > > > >>
                        > > > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                        > > > >>
                        > > > >>
                        > > > >>
                        > > > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                        > > > >>> Thanks,
                        > > > >>>
                        > > > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                        > > > >>>
                        > > > >>> Thanks in advance!
                        > > > >>>
                        > > > >>> Tom
                        > > > >>>
                        > > > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                        > > > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                        > > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                        > > > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                        > > > >>>
                        > > > >>>
                        > > > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                        > > > >>>>
                        > > > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                        > > > >>>>
                        > > > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                        > > > >>>>
                        > > > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                        > > > >>>>
                        > > > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                        > > > >>>>
                        > > > >>>>
                        > > > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                        > > > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                        > > > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                        > > > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                        > > > >>>>>
                        > > > >>>>>
                        > > > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                        > > > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                        > > > >>>>>
                        > > > >>>>>
                        > > > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                        > > > >>>>> Thanks. I will try.
                        > > > >>>>>
                        > > > >>>>> Best, Tom
                        > > > >>>>>
                        > > > >>>>>
                        > > > >>>>>>
                        > > > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                        > > > >>>>>>> Hi everybody,
                        > > > >>>>>>>
                        > > > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                        > > > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                        > > > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                        > > > >>>>>>>
                        > > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                        > > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                        > > > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                        > > > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                        > > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                        > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                        > > > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                        > > > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                        > > > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                        > > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                        > > > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                        > > > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                        > > > >>>>>>>
                        > > > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                        > > > >>>>>>>
                        > > > >>>>>>> Thanks soo much in advance!
                        > > > >>>>>>>
                        > > > >>>>>>> Tom
                        > > > >>>>>>>
                        > > > >
                        > > > >
                        > > > >
                        > > > > ------------------------------------
                        > > > >
                        > > > > To visit your group on the web, go to:
                        > > > > http://groups.yahoo.com/group/wuhu_software_group/
                        > > > >
                        > > > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                        > > > >
                        > > > > To unsubscribe from this group, send an email to:
                        > > > > wuhu_software_group-unsubscribe@yahoogroups.com
                        > > > >
                        > > > > WUHU Download page:
                        > > > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                        > > > >
                        > > > >
                        > > > >
                        > > >
                        > >
                        >
                      • wuhu_software
                        Tom, I couple of questions 1) Was W: Weather Station SienaHei data.csv created? 2) You must specify the action file under the Action/Alarm screen. Hit the
                        Message 11 of 18 , May 6, 2012
                        • 0 Attachment
                          Tom,

                          I couple of questions

                          1) Was W:\Weather Station\SienaHei\data.csv created?

                          2) You must specify the action file under the Action/Alarm screen. Hit the button next to the On Weather Update, in the Action on Activation edit box, you would enter the complete path to your Action.txt file:

                          actionfile:"C:\Temp\Actions.txt"

                          If the Actions.txt were in the C:\Temp folder.

                          Have you done this step?



                          --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@...> wrote:
                          >
                          > I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.
                          >
                          > Thanks in advance...
                          >
                          > Tom
                          >
                          > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                          > >
                          > > Hi again,
                          > >
                          > > The created data files are in folder:
                          > > http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                          > >
                          > > They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                          > >
                          > > Thanks, Tom
                          > >
                          > > --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@> wrote:
                          > > >
                          > > >
                          > > >
                          > > > Tom,
                          > > >
                          > > > I do not see your attachments.
                          > > >
                          > > > You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                          > > >
                          > > > As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                          > > >
                          > > >
                          > > >
                          > > > ________________________________
                          > > > From: Tom Wassmer <twassmer@>
                          > > > To: wuhu_software_group@yahoogroups.com
                          > > > Sent: Saturday, May 5, 2012 6:17 PM
                          > > > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                          > > >
                          > > >
                          > > >  
                          > > > Hi John,
                          > > >
                          > > > I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                          > > >
                          > > > Thanks in advance!
                          > > >
                          > > > Tom
                          > > >
                          > > > P.S. How can I upload these files?
                          > > >
                          > > > --- In wuhu_software_group@yahoogroups.com, John Liss <john@> wrote:
                          > > > >
                          > > > > Hey Tom,
                          > > > >
                          > > > > That's because the line that contains 'template:' generates your data file.
                          > > > > Another way of putting it is the 'template:' command creates the data.csv
                          > > > >
                          > > > > You don't need to copy it to W: if it is being created on W:
                          > > > >
                          > > > > Try just:
                          > > > >
                          > > > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                          > > > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                          > > > >
                          > > > >
                          > > > > The + on the data.csv means it will keep adding data to that file.
                          > > > > The highsandlows.txt is a template to create a html page.
                          > > > >
                          > > > > Next step is make sure you have turned on Alerts/Actions.
                          > > > > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                          > > > >
                          > > > > -John
                          > > > >
                          > > > > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                          > > > > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                          > > > > >
                          > > > > > Thanks, Tom
                          > > > > >
                          > > > > >
                          > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                          > > > > >>
                          > > > > >> Are the templates not working correctly?
                          > > > > >>
                          > > > > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                          > > > > >>
                          > > > > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                          > > > > >>
                          > > > > >> Were the output files on w:\ created?
                          > > > > >>
                          > > > > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                          > > > > >>
                          > > > > >>
                          > > > > >>
                          > > > > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                          > > > > >>> Thanks,
                          > > > > >>>
                          > > > > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                          > > > > >>>
                          > > > > >>> Thanks in advance!
                          > > > > >>>
                          > > > > >>> Tom
                          > > > > >>>
                          > > > > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                          > > > > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                          > > > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                          > > > > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                          > > > > >>>
                          > > > > >>>
                          > > > > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                          > > > > >>>>
                          > > > > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                          > > > > >>>>
                          > > > > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                          > > > > >>>>
                          > > > > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                          > > > > >>>>
                          > > > > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                          > > > > >>>>
                          > > > > >>>>
                          > > > > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                          > > > > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                          > > > > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                          > > > > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                          > > > > >>>>>
                          > > > > >>>>>
                          > > > > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                          > > > > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                          > > > > >>>>>
                          > > > > >>>>>
                          > > > > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                          > > > > >>>>> Thanks. I will try.
                          > > > > >>>>>
                          > > > > >>>>> Best, Tom
                          > > > > >>>>>
                          > > > > >>>>>
                          > > > > >>>>>>
                          > > > > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                          > > > > >>>>>>> Hi everybody,
                          > > > > >>>>>>>
                          > > > > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                          > > > > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                          > > > > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                          > > > > >>>>>>>
                          > > > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                          > > > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                          > > > > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                          > > > > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                          > > > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                          > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                          > > > > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                          > > > > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                          > > > > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                          > > > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                          > > > > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                          > > > > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                          > > > > >>>>>>>
                          > > > > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                          > > > > >>>>>>>
                          > > > > >>>>>>> Thanks soo much in advance!
                          > > > > >>>>>>>
                          > > > > >>>>>>> Tom
                          > > > > >>>>>>>
                          > > > > >
                          > > > > >
                          > > > > >
                          > > > > > ------------------------------------
                          > > > > >
                          > > > > > To visit your group on the web, go to:
                          > > > > > http://groups.yahoo.com/group/wuhu_software_group/
                          > > > > >
                          > > > > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                          > > > > >
                          > > > > > To unsubscribe from this group, send an email to:
                          > > > > > wuhu_software_group-unsubscribe@yahoogroups.com
                          > > > > >
                          > > > > > WUHU Download page:
                          > > > > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                          > > > > >
                          > > > > >
                          > > > > >
                          > > > >
                          > > >
                          > >
                          >
                        • Tom Wassmer
                          Hi and thanks! Yes, the file data.csv was created in W: I attached it in the files area. I link to my action file which is located in the WUHU installation
                          Message 12 of 18 , May 6, 2012
                          • 0 Attachment
                            Hi and thanks! Yes, the file data.csv was created in W: I attached it in the files area.
                            I link to my action file which is located in the WUHU installation folder.

                            Thanks, Tom


                            --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
                            >
                            >
                            > Tom,
                            >
                            > I couple of questions
                            >
                            > 1) Was W:\Weather Station\SienaHei\data.csv created?
                            >
                            > 2) You must specify the action file under the Action/Alarm screen. Hit the button next to the On Weather Update, in the Action on Activation edit box, you would enter the complete path to your Action.txt file:
                            >
                            > actionfile:"C:\Temp\Actions.txt"
                            >
                            > If the Actions.txt were in the C:\Temp folder.
                            >
                            > Have you done this step?
                            >
                            >
                            >
                            > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                            > >
                            > > I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.
                            > >
                            > > Thanks in advance...
                            > >
                            > > Tom
                            > >
                            > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                            > > >
                            > > > Hi again,
                            > > >
                            > > > The created data files are in folder:
                            > > > http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                            > > >
                            > > > They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                            > > >
                            > > > Thanks, Tom
                            > > >
                            > > > --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@> wrote:
                            > > > >
                            > > > >
                            > > > >
                            > > > > Tom,
                            > > > >
                            > > > > I do not see your attachments.
                            > > > >
                            > > > > You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                            > > > >
                            > > > > As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                            > > > >
                            > > > >
                            > > > >
                            > > > > ________________________________
                            > > > > From: Tom Wassmer <twassmer@>
                            > > > > To: wuhu_software_group@yahoogroups.com
                            > > > > Sent: Saturday, May 5, 2012 6:17 PM
                            > > > > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                            > > > >
                            > > > >
                            > > > >  
                            > > > > Hi John,
                            > > > >
                            > > > > I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                            > > > >
                            > > > > Thanks in advance!
                            > > > >
                            > > > > Tom
                            > > > >
                            > > > > P.S. How can I upload these files?
                            > > > >
                            > > > > --- In wuhu_software_group@yahoogroups.com, John Liss <john@> wrote:
                            > > > > >
                            > > > > > Hey Tom,
                            > > > > >
                            > > > > > That's because the line that contains 'template:' generates your data file.
                            > > > > > Another way of putting it is the 'template:' command creates the data.csv
                            > > > > >
                            > > > > > You don't need to copy it to W: if it is being created on W:
                            > > > > >
                            > > > > > Try just:
                            > > > > >
                            > > > > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                            > > > > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                            > > > > >
                            > > > > >
                            > > > > > The + on the data.csv means it will keep adding data to that file.
                            > > > > > The highsandlows.txt is a template to create a html page.
                            > > > > >
                            > > > > > Next step is make sure you have turned on Alerts/Actions.
                            > > > > > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                            > > > > >
                            > > > > > -John
                            > > > > >
                            > > > > > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                            > > > > > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                            > > > > > >
                            > > > > > > Thanks, Tom
                            > > > > > >
                            > > > > > >
                            > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                            > > > > > >>
                            > > > > > >> Are the templates not working correctly?
                            > > > > > >>
                            > > > > > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                            > > > > > >>
                            > > > > > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                            > > > > > >>
                            > > > > > >> Were the output files on w:\ created?
                            > > > > > >>
                            > > > > > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                            > > > > > >>
                            > > > > > >>
                            > > > > > >>
                            > > > > > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                            > > > > > >>> Thanks,
                            > > > > > >>>
                            > > > > > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                            > > > > > >>>
                            > > > > > >>> Thanks in advance!
                            > > > > > >>>
                            > > > > > >>> Tom
                            > > > > > >>>
                            > > > > > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                            > > > > > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                            > > > > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                            > > > > > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                            > > > > > >>>
                            > > > > > >>>
                            > > > > > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                            > > > > > >>>>
                            > > > > > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                            > > > > > >>>>
                            > > > > > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                            > > > > > >>>>
                            > > > > > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                            > > > > > >>>>
                            > > > > > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                            > > > > > >>>>
                            > > > > > >>>>
                            > > > > > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                            > > > > > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                            > > > > > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                            > > > > > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                            > > > > > >>>>>
                            > > > > > >>>>>
                            > > > > > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                            > > > > > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                            > > > > > >>>>>
                            > > > > > >>>>>
                            > > > > > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                            > > > > > >>>>> Thanks. I will try.
                            > > > > > >>>>>
                            > > > > > >>>>> Best, Tom
                            > > > > > >>>>>
                            > > > > > >>>>>
                            > > > > > >>>>>>
                            > > > > > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                            > > > > > >>>>>>> Hi everybody,
                            > > > > > >>>>>>>
                            > > > > > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                            > > > > > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                            > > > > > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                            > > > > > >>>>>>>
                            > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                            > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                            > > > > > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                            > > > > > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                            > > > > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                            > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                            > > > > > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                            > > > > > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                            > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                            > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                            > > > > > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                            > > > > > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                            > > > > > >>>>>>>
                            > > > > > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                            > > > > > >>>>>>>
                            > > > > > >>>>>>> Thanks soo much in advance!
                            > > > > > >>>>>>>
                            > > > > > >>>>>>> Tom
                            > > > > > >>>>>>>
                            > > > > > >
                            > > > > > >
                            > > > > > >
                            > > > > > > ------------------------------------
                            > > > > > >
                            > > > > > > To visit your group on the web, go to:
                            > > > > > > http://groups.yahoo.com/group/wuhu_software_group/
                            > > > > > >
                            > > > > > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                            > > > > > >
                            > > > > > > To unsubscribe from this group, send an email to:
                            > > > > > > wuhu_software_group-unsubscribe@yahoogroups.com
                            > > > > > >
                            > > > > > > WUHU Download page:
                            > > > > > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                            > > > > > >
                            > > > > > >
                            > > > > > >
                            > > > > >
                            > > > >
                            > > >
                            > >
                            >
                          • wuhu_software
                            Tom, I am not sure what is going on there. I would suggest that you install Team Viewer 6 (a free application) then send me your ID and password in email (to
                            Message 13 of 18 , May 6, 2012
                            • 0 Attachment
                              Tom,

                              I am not sure what is going on there.

                              I would suggest that you install Team Viewer 6 (a free application) then send me your ID and password in email (to wuhu_software at yahoo.com) and I can take a look.

                              Going out for a walk right now, back in an hour or so.


                              --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@...> wrote:
                              >
                              > Hi and thanks! Yes, the file data.csv was created in W: I attached it in the files area.
                              > I link to my action file which is located in the WUHU installation folder.
                              >
                              > Thanks, Tom
                              >
                              >
                              > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                              > >
                              > >
                              > > Tom,
                              > >
                              > > I couple of questions
                              > >
                              > > 1) Was W:\Weather Station\SienaHei\data.csv created?
                              > >
                              > > 2) You must specify the action file under the Action/Alarm screen. Hit the button next to the On Weather Update, in the Action on Activation edit box, you would enter the complete path to your Action.txt file:
                              > >
                              > > actionfile:"C:\Temp\Actions.txt"
                              > >
                              > > If the Actions.txt were in the C:\Temp folder.
                              > >
                              > > Have you done this step?
                              > >
                              > >
                              > >
                              > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                              > > >
                              > > > I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.
                              > > >
                              > > > Thanks in advance...
                              > > >
                              > > > Tom
                              > > >
                              > > > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                              > > > >
                              > > > > Hi again,
                              > > > >
                              > > > > The created data files are in folder:
                              > > > > http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                              > > > >
                              > > > > They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                              > > > >
                              > > > > Thanks, Tom
                              > > > >
                              > > > > --- In wuhu_software_group@yahoogroups.com, "H. Smith" <wuhu_software@> wrote:
                              > > > > >
                              > > > > >
                              > > > > >
                              > > > > > Tom,
                              > > > > >
                              > > > > > I do not see your attachments.
                              > > > > >
                              > > > > > You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                              > > > > >
                              > > > > > As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                              > > > > >
                              > > > > >
                              > > > > >
                              > > > > > ________________________________
                              > > > > > From: Tom Wassmer <twassmer@>
                              > > > > > To: wuhu_software_group@yahoogroups.com
                              > > > > > Sent: Saturday, May 5, 2012 6:17 PM
                              > > > > > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                              > > > > >
                              > > > > >
                              > > > > >  
                              > > > > > Hi John,
                              > > > > >
                              > > > > > I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                              > > > > >
                              > > > > > Thanks in advance!
                              > > > > >
                              > > > > > Tom
                              > > > > >
                              > > > > > P.S. How can I upload these files?
                              > > > > >
                              > > > > > --- In wuhu_software_group@yahoogroups.com, John Liss <john@> wrote:
                              > > > > > >
                              > > > > > > Hey Tom,
                              > > > > > >
                              > > > > > > That's because the line that contains 'template:' generates your data file.
                              > > > > > > Another way of putting it is the 'template:' command creates the data.csv
                              > > > > > >
                              > > > > > > You don't need to copy it to W: if it is being created on W:
                              > > > > > >
                              > > > > > > Try just:
                              > > > > > >
                              > > > > > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                              > > > > > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                              > > > > > >
                              > > > > > >
                              > > > > > > The + on the data.csv means it will keep adding data to that file.
                              > > > > > > The highsandlows.txt is a template to create a html page.
                              > > > > > >
                              > > > > > > Next step is make sure you have turned on Alerts/Actions.
                              > > > > > > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                              > > > > > >
                              > > > > > > -John
                              > > > > > >
                              > > > > > > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                              > > > > > > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                              > > > > > > >
                              > > > > > > > Thanks, Tom
                              > > > > > > >
                              > > > > > > >
                              > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                              > > > > > > >>
                              > > > > > > >> Are the templates not working correctly?
                              > > > > > > >>
                              > > > > > > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                              > > > > > > >>
                              > > > > > > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                              > > > > > > >>
                              > > > > > > >> Were the output files on w:\ created?
                              > > > > > > >>
                              > > > > > > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                              > > > > > > >>
                              > > > > > > >>
                              > > > > > > >>
                              > > > > > > >> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                              > > > > > > >>> Thanks,
                              > > > > > > >>>
                              > > > > > > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                              > > > > > > >>>
                              > > > > > > >>> Thanks in advance!
                              > > > > > > >>>
                              > > > > > > >>> Tom
                              > > > > > > >>>
                              > > > > > > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                              > > > > > > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                              > > > > > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                              > > > > > > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                              > > > > > > >>>
                              > > > > > > >>>
                              > > > > > > >>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                              > > > > > > >>>>
                              > > > > > > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                              > > > > > > >>>>
                              > > > > > > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                              > > > > > > >>>>
                              > > > > > > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                              > > > > > > >>>>
                              > > > > > > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                              > > > > > > >>>>
                              > > > > > > >>>>
                              > > > > > > >>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                              > > > > > > >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                              > > > > > > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                              > > > > > > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                              > > > > > > >>>>>
                              > > > > > > >>>>>
                              > > > > > > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                              > > > > > > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                              > > > > > > >>>>>
                              > > > > > > >>>>>
                              > > > > > > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                              > > > > > > >>>>> Thanks. I will try.
                              > > > > > > >>>>>
                              > > > > > > >>>>> Best, Tom
                              > > > > > > >>>>>
                              > > > > > > >>>>>
                              > > > > > > >>>>>>
                              > > > > > > >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                              > > > > > > >>>>>>> Hi everybody,
                              > > > > > > >>>>>>>
                              > > > > > > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                              > > > > > > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                              > > > > > > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                              > > > > > > >>>>>>>
                              > > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                              > > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                              > > > > > > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                              > > > > > > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                              > > > > > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                              > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                              > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                              > > > > > > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                              > > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                              > > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                              > > > > > > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                              > > > > > > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                              > > > > > > >>>>>>>
                              > > > > > > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                              > > > > > > >>>>>>>
                              > > > > > > >>>>>>> Thanks soo much in advance!
                              > > > > > > >>>>>>>
                              > > > > > > >>>>>>> Tom
                              > > > > > > >>>>>>>
                              > > > > > > >
                              > > > > > > >
                              > > > > > > >
                              > > > > > > > ------------------------------------
                              > > > > > > >
                              > > > > > > > To visit your group on the web, go to:
                              > > > > > > > http://groups.yahoo.com/group/wuhu_software_group/
                              > > > > > > >
                              > > > > > > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                              > > > > > > >
                              > > > > > > > To unsubscribe from this group, send an email to:
                              > > > > > > > wuhu_software_group-unsubscribe@yahoogroups.com
                              > > > > > > >
                              > > > > > > > WUHU Download page:
                              > > > > > > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                              > > > > > > >
                              > > > > > > >
                              > > > > > > >
                              > > > > > >
                              > > > > >
                              > > > >
                              > > >
                              > >
                              >
                            • Tony Randazzo
                              IF I may...Teamviewer Seven works much better... http://www.teamviewer.com/en/download/index.aspx Just helping out.... Tony From: wuhu_software Sent: Sunday,
                              Message 14 of 18 , May 6, 2012
                              • 0 Attachment
                                IF I may...Teamviewer Seven works much better...
                                 
                                Just helping out....
                                Tony
                                 
                                 
                                Sent: Sunday, May 06, 2012 3:34 PM
                                Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                                 
                                 


                                Tom,

                                I am not sure what is going on there.

                                I would suggest that you install Team Viewer 6 (a free application) then send me your ID and password in email (to wuhu_software at yahoo.com) and I can take a look.

                                Going out for a walk right now, back in an hour or so.

                                --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer" <twassmer@...> wrote:

                                >
                                > Hi and thanks! Yes,
                                the file data.csv was created in W: I attached it in the files area.
                                > I
                                link to my action file which is located in the WUHU installation folder.
                                >
                                > Thanks, Tom
                                >
                                >
                                > --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                                > >
                                > >
                                > > Tom,
                                > >
                                > > I couple of questions
                                > >
                                > > 1) Was W:\Weather Station\SienaHei\data.csv created?
                                > >
                                > > 2) You must specify the action file under the Action/Alarm screen. Hit the
                                button next to the On Weather Update, in the Action on Activation edit box, you would enter the complete path to your Action.txt file:
                                > >
                                > > actionfile:"C:\Temp\Actions.txt"
                                > >
                                > > If the
                                Actions.txt were in the C:\Temp folder.
                                > >
                                > > Have you done
                                this step?
                                > >
                                > >
                                > >
                                > > --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                                > > >
                                > > > I
                                also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.
                                > > >
                                > > > Thanks in
                                advance...
                                > > >
                                > > > Tom
                                > > >
                                > > > --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                                > > > >
                                > > > > Hi again,
                                > > > >
                                > > > > The created data
                                files are in folder:
                                > > > >
                                href="http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/">http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                                > > > >
                                > > > > They are expanded every 5 minutes so
                                data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                                > > > >
                                > > > >
                                Thanks, Tom
                                > > > >
                                > > > > --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "H. Smith" <wuhu_software@> wrote:
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > >
                                Tom,
                                > > > > >
                                > > > > > I do not see your
                                attachments.
                                > > > > >
                                > > > > > You can
                                make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                                > > > > >
                                > > > > > As I mentioned to
                                the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                                > > > > >
                                > > > > >
                                > > > > >
                                > > > > > ________________________________
                                > > > > > From: Tom
                                Wassmer <twassmer@>
                                > > > > > To:
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com
                                > > > > > Sent: Saturday, May 5, 2012 6:17 PM
                                > > > > > Subject: [wuhu_software_group] Re: Newbie Question about Davis
                                Vantage Pro2 with WUHU
                                > > > > >
                                > > > > >
                                > > > > >  
                                > > > > > Hi
                                John,
                                > > > > >
                                > > > > > I tried that now
                                it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                                > > > > >
                                > > > > > Thanks in advance!
                                > > > > >
                                > > > > > Tom
                                > > > > >
                                > > > > > P.S. How can I upload these files?
                                > > > > >
                                > > > > > --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, John Liss <john@> wrote:
                                > > > > > >
                                > > > > > > Hey Tom,
                                > > > > > >
                                > > > > > > That's because the line that contains 'template:' generates your
                                data file.
                                > > > > > > Another way of putting it is the
                                'template:' command creates the data.csv
                                > > > > > >
                                > > > > > > You don't need to copy it to W: if it is being
                                created on W:
                                > > > > > >
                                > > > > > >
                                Try just:
                                > > > > > >
                                > > > > > >
                                template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                                > > > > > >
                                template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                                > > > > > >
                                > > > > > >
                                > > > > > > The + on the data.csv
                                means it will keep adding data to that file.
                                > > > > > >
                                The highsandlows.txt is a template to create a html page.
                                > > > > > >
                                > > > > > > Next step is make sure you have
                                turned on Alerts/Actions.
                                > > > > > >
                                href="http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/">http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                                > > > > > >
                                > > > > > > -John
                                > > > > > >
                                > > > > > > On 5/4/2012 8:15 AM, Tom
                                Wassmer wrote:
                                > > > > > > > Thanks again. I use the
                                original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                                > > > > > > >
                                > > > > > > > Thanks, Tom
                                > > > > > > >
                                > > > > > > >
                                > > > > > > > --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                > > > > > > >>
                                > > > > > > >> Are the templates not working
                                correctly?
                                > > > > > > >>
                                > > > > > > >> Everything looks Ok except on the file copy commands, there is no
                                + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                                > > > > > > >>
                                > > > > > > >> I would need to see
                                your source templates, templates\csv.txt and templates\highsandlows.txt.
                                > > > > > > >>
                                > > > > > > >> Were
                                the output files on w:\ created?
                                > > > > > > >>
                                > > > > > > >> You can send me your
                                templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                                > > > > > > >>
                                > > > > > > >>
                                > > > > > > >>
                                > > > > > > >> --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                                > > > > > > >>> Thanks,
                                > > > > > > >>>
                                > > > > > > >>> I followed the guide and changed the WHU
                                Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                                > > > > > > >>>
                                > > > > > > >>> Thanks in advance!
                                > > > > > > >>>
                                > > > > > > >>> Tom
                                > > > > > > >>>
                                > > > > > > >>>
                                template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                                > > > > > > >>>
                                template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                                > > > > > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather
                                Station\SienaHei\data2.csv+"
                                > > > > > > >>>
                                copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                                > > > > > > >>>
                                > > > > > > >>>
                                > > > > > > >>> --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                > > > > > > >>>>
                                > > > > > > >>>> Yes, you can
                                save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                                > > > > > > >>>>
                                > > > > > > >>>> The default format of the data is the
                                La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                                > > > > > > >>>>
                                > > > > > > >>>> You probably want a .csv (comma
                                separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                                > > > > > > >>>>
                                > > > > > > >>>> There are
                                also printable charts creating within the program. If you are only after charts, that might suffice.
                                > > > > > > >>>>
                                > > > > > > >>>>
                                > > > > > > >>>> --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                                > > > > > > >>>>> --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                > > > > > > >>>>>> 1) I am not sure what you are saying. If you want to
                                run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                                > > > > > > >>>>> Thanks. I will
                                check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                                > > > > > > >>>>>
                                > > > > > > >>>>>
                                > > > > > > >>>>>> 2) What form of data are you talking about? In the
                                history.dat? In a .csv file? Please be more specific.
                                > > > > > > >>>>> I don't care about the format as long as it is
                                easy to export and use in any plotting program.
                                > > > > > > >>>>>
                                > > > > > > >>>>>
                                > > > > > > >>>>>>
                                3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                                > > > > > > >>>>> Thanks. I will
                                try.
                                > > > > > > >>>>>
                                > > > > > > >>>>> Best, Tom
                                > > > > > > >>>>>
                                > > > > > > >>>>>
                                > > > > > > >>>>>>
                                > > > > > > >>>>>> --- In
                                href="mailto:wuhu_software_group%40yahoogroups.com">mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                                > > > > > > >>>>>>> Hi everybody,
                                > > > > > > >>>>>>>
                                > > > > > > >>>>>>> I successfully connected our Davis Vantage Pro2
                                station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                                > > > > > > >>>>>>> 1.) As I needed to use a virtual usb to com port to
                                connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                                > > > > > > >>>>>>> 2.) The log function records some things that I am
                                not sure if they are error messages or just status reports:
                                > > > > > > >>>>>>>
                                > > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time:
                                Tue May 01 13:01:00 2012.
                                > > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery
                                Voltage: 4.69
                                > > > > > > >>>>>>> Tue
                                May 01 13:02:33 2012> All transmitter batteries are Ok.
                                > > > > > > >>>>>>> Tue May 01 13:02:33 2012> All
                                repeater batteries are Ok.
                                > > > > > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is
                                of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                                > > > > > > >>>>>>> Tue May 01 13:02:38
                                2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                                > > > > > > >>>>>>> Tue May 01 13:02:38 2012>
                                Retrieving outdoor temperature.
                                > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor
                                temperature.
                                > > > > > > >>>>>>> Tue
                                May 01 13:02:38 2012> Retrieving outdoor humidity.
                                > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving
                                indoor humidity.
                                > > > > > > >>>>>>>
                                Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                                > > > > > > >>>>>>> Tue May 01 13:02:38 2012>
                                Retrieving outdoor wind chill.
                                > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor
                                wind speed and direction.
                                > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor
                                wind gust (slow).
                                > > > > > > >>>>>>>
                                Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                                > > > > > > >>>>>>> Tue May 01
                                13:02:39 2012> Retrieving rainfall total.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily
                                rainfall.
                                > > > > > > >>>>>>> Tue May
                                01 13:02:39 2012> Retrieving relative pressure.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving
                                absolute pressure (cached).
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar
                                radiation.
                                > > > > > > >>>>>>> Tue May
                                01 13:02:39 2012> Retrieving solar UV.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET
                                data.
                                > > > > > > >>>>>>> Tue May 01
                                13:02:39 2012> Retrieving extra sensors temperature data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012>
                                Retrieving extra sensors humidity data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra
                                sensors soil temperature data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra
                                sensors soil moisture data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra
                                sensors leaf temperature data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra
                                sensors leaf wetness data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> All data collected
                                successfully, post processing weather data.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing
                                weather data.
                                > > > > > > >>>>>>> Tue
                                May 01 13:02:39 2012> Post processing of weather succeeded.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012>
                                Completed data collection routine.
                                > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Calling
                                Read().
                                > > > > > > >>>>>>> Tue May 01
                                13:02:41 2012> Read() succeeded, continuing to process.
                                > > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console
                                clock time: Tue May 01 13:01:00 2012.
                                > > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery
                                Voltage: 4.69
                                > > > > > > >>>>>>> Tue
                                May 01 13:02:42 2012> All transmitter batteries are Ok.
                                > > > > > > >>>>>>> Tue May 01 13:02:42 2012> All
                                repeater batteries are Ok.
                                > > > > > > >>>>>>>
                                > > > > > > >>>>>>> 3.) I installed the software with my faculty login
                                but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                                > > > > > > >>>>>>>
                                > > > > > > >>>>>>> Thanks soo much in advance!
                                > > > > > > >>>>>>>
                                > > > > > > >>>>>>> Tom
                                > > > > > > >>>>>>>
                                > > > > > > >
                                > > > > > > >
                                > > > > > > >
                                > > > > > > > ------------------------------------
                                > > > > > > >
                                > > > > > > > To visit your group on the
                                web, go to:
                                > > > > > > >
                                href="http://groups.yahoo.com/group/wuhu_software_group/">http://groups.yahoo.com/group/wuhu_software_group/
                                > > > > > > >
                                > > > > > > > Want more or
                                less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                                > > > > > > >
                                > > > > > > > To
                                unsubscribe from this group, send an email to:
                                > > > > > > >
                                href="mailto:wuhu_software_group-unsubscribe%40yahoogroups.com">mailto:wuhu_software_group-unsubscribe%40yahoogroups.com
                                > > > > > > >
                                > > > > > > > WUHU
                                Download page:
                                > > > > > > >
                                href="http://home.comcast.net/~wuhu_software/Yahoo">http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                                > > > > > > >
                                > > > > > > >
                                > > > > > > >
                                > > > > > >
                                > > > > >
                                > > > >
                                > > >
                                > >
                                >

                              • Tom Wassmer
                                Hi, I will go to my workstation in the university after taking a walk with my dog myself. I will then send you the user/password. However, I am not sure that
                                Message 15 of 18 , May 6, 2012
                                • 0 Attachment
                                  Hi,

                                  I will go to my workstation in the university after taking a walk with my dog myself. I will then send you the user/password. However, I am not sure that it will work as our network admins are quite paranoid and I cannot get e.g. VPN with my old university library working...

                                  Thanks, Tom

                                  --- In wuhu_software_group@yahoogroups.com, "Tony Randazzo" <tony@...> wrote:
                                  >
                                  > IF I may...Teamviewer Seven works much better...
                                  > http://www.teamviewer.com/en/download/index.aspx
                                  >
                                  > Just helping out....
                                  > Tony
                                  >
                                  >
                                  > From: wuhu_software
                                  > Sent: Sunday, May 06, 2012 3:34 PM
                                  > To: wuhu_software_group@yahoogroups.com
                                  > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                                  >
                                  >
                                  >
                                  > Tom,
                                  >
                                  > I am not sure what is going on there.
                                  >
                                  > I would suggest that you install Team Viewer 6 (a free application) then send me your ID and password in email (to wuhu_software at yahoo.com) and I can take a look.
                                  >
                                  > Going out for a walk right now, back in an hour or so.
                                  >
                                  > --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                                  > >
                                  > > Hi and thanks! Yes, the file data.csv was created in W: I attached it in the files area.
                                  > > I link to my action file which is located in the WUHU installation folder.
                                  > >
                                  > > Thanks, Tom
                                  > >
                                  > >
                                  > > --- In mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                                  > > >
                                  > > >
                                  > > > Tom,
                                  > > >
                                  > > > I couple of questions
                                  > > >
                                  > > > 1) Was W:\Weather Station\SienaHei\data.csv created?
                                  > > >
                                  > > > 2) You must specify the action file under the Action/Alarm screen. Hit the button next to the On Weather Update, in the Action on Activation edit box, you would enter the complete path to your Action.txt file:
                                  > > >
                                  > > > actionfile:"C:\Temp\Actions.txt"
                                  > > >
                                  > > > If the Actions.txt were in the C:\Temp folder.
                                  > > >
                                  > > > Have you done this step?
                                  > > >
                                  > > >
                                  > > >
                                  > > > --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                                  > > > >
                                  > > > > I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.
                                  > > > >
                                  > > > > Thanks in advance...
                                  > > > >
                                  > > > > Tom
                                  > > > >
                                  > > > > --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer" <twassmer@> wrote:
                                  > > > > >
                                  > > > > > Hi again,
                                  > > > > >
                                  > > > > > The created data files are in folder:
                                  > > > > > http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                                  > > > > >
                                  > > > > > They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                                  > > > > >
                                  > > > > > Thanks, Tom
                                  > > > > >
                                  > > > > > --- In mailto:wuhu_software_group%40yahoogroups.com, "H. Smith" <wuhu_software@> wrote:
                                  > > > > > >
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > Tom,
                                  > > > > > >
                                  > > > > > > I do not see your attachments.
                                  > > > > > >
                                  > > > > > > You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                                  > > > > > >
                                  > > > > > > As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                                  > > > > > >
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > ________________________________
                                  > > > > > > From: Tom Wassmer <twassmer@>
                                  > > > > > > To: mailto:wuhu_software_group%40yahoogroups.com
                                  > > > > > > Sent: Saturday, May 5, 2012 6:17 PM
                                  > > > > > > Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                                  > > > > > >
                                  > > > > > >
                                  > > > > > > Â
                                  > > > > > > Hi John,
                                  > > > > > >
                                  > > > > > > I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                                  > > > > > >
                                  > > > > > > Thanks in advance!
                                  > > > > > >
                                  > > > > > > Tom
                                  > > > > > >
                                  > > > > > > P.S. How can I upload these files?
                                  > > > > > >
                                  > > > > > > --- In mailto:wuhu_software_group%40yahoogroups.com, John Liss <john@> wrote:
                                  > > > > > > >
                                  > > > > > > > Hey Tom,
                                  > > > > > > >
                                  > > > > > > > That's because the line that contains 'template:' generates your data file.
                                  > > > > > > > Another way of putting it is the 'template:' command creates the data.csv
                                  > > > > > > >
                                  > > > > > > > You don't need to copy it to W: if it is being created on W:
                                  > > > > > > >
                                  > > > > > > > Try just:
                                  > > > > > > >
                                  > > > > > > > template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                                  > > > > > > > template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                                  > > > > > > >
                                  > > > > > > >
                                  > > > > > > > The + on the data.csv means it will keep adding data to that file.
                                  > > > > > > > The highsandlows.txt is a template to create a html page.
                                  > > > > > > >
                                  > > > > > > > Next step is make sure you have turned on Alerts/Actions.
                                  > > > > > > > http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                                  > > > > > > >
                                  > > > > > > > -John
                                  > > > > > > >
                                  > > > > > > > On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                                  > > > > > > > > Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                                  > > > > > > > >
                                  > > > > > > > > Thanks, Tom
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > --- In mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                  > > > > > > > >>
                                  > > > > > > > >> Are the templates not working correctly?
                                  > > > > > > > >>
                                  > > > > > > > >> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                                  > > > > > > > >>
                                  > > > > > > > >> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                                  > > > > > > > >>
                                  > > > > > > > >> Were the output files on w:\ created?
                                  > > > > > > > >>
                                  > > > > > > > >> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                                  > > > > > > > >>
                                  > > > > > > > >>
                                  > > > > > > > >>
                                  > > > > > > > >> --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                                  > > > > > > > >>> Thanks,
                                  > > > > > > > >>>
                                  > > > > > > > >>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                                  > > > > > > > >>>
                                  > > > > > > > >>> Thanks in advance!
                                  > > > > > > > >>>
                                  > > > > > > > >>> Tom
                                  > > > > > > > >>>
                                  > > > > > > > >>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                                  > > > > > > > >>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                                  > > > > > > > >>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                                  > > > > > > > >>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                                  > > > > > > > >>>
                                  > > > > > > > >>>
                                  > > > > > > > >>> --- In mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                  > > > > > > > >>>>
                                  > > > > > > > >>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                                  > > > > > > > >>>>
                                  > > > > > > > >>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                                  > > > > > > > >>>>
                                  > > > > > > > >>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                                  > > > > > > > >>>>
                                  > > > > > > > >>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                                  > > > > > > > >>>>
                                  > > > > > > > >>>>
                                  > > > > > > > >>>> --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                                  > > > > > > > >>>>> --- In mailto:wuhu_software_group%40yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                  > > > > > > > >>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                                  > > > > > > > >>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                                  > > > > > > > >>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                                  > > > > > > > >>>>> Thanks. I will try.
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>> Best, Tom
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>>
                                  > > > > > > > >>>>>>
                                  > > > > > > > >>>>>> --- In mailto:wuhu_software_group%40yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                                  > > > > > > > >>>>>>> Hi everybody,
                                  > > > > > > > >>>>>>>
                                  > > > > > > > >>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                                  > > > > > > > >>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                                  > > > > > > > >>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                                  > > > > > > > >>>>>>>
                                  > > > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                                  > > > > > > > >>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                                  > > > > > > > >>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                                  > > > > > > > >>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                                  > > > > > > > >>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                                  > > > > > > > >>>>>>>
                                  > > > > > > > >>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                                  > > > > > > > >>>>>>>
                                  > > > > > > > >>>>>>> Thanks soo much in advance!
                                  > > > > > > > >>>>>>>
                                  > > > > > > > >>>>>>> Tom
                                  > > > > > > > >>>>>>>
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > > ------------------------------------
                                  > > > > > > > >
                                  > > > > > > > > To visit your group on the web, go to:
                                  > > > > > > > > http://groups.yahoo.com/group/wuhu_software_group/
                                  > > > > > > > >
                                  > > > > > > > > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                                  > > > > > > > >
                                  > > > > > > > > To unsubscribe from this group, send an email to:
                                  > > > > > > > > mailto:wuhu_software_group-unsubscribe%40yahoogroups.com
                                  > > > > > > > >
                                  > > > > > > > > WUHU Download page:
                                  > > > > > > > > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > > >
                                  > > > > > > >
                                  > > > > > >
                                  > > > > >
                                  > > > >
                                  > > >
                                  > >
                                  >
                                • John Liss
                                  Check your WUHU Configuration.INI file for: [General Settings] Write Extended Currentdat=1 If it doesn t exist add it. If I run the files from the examples.zip
                                  Message 16 of 18 , May 7, 2012
                                  • 0 Attachment
                                    Check your WUHU Configuration.INI file for:

                                    [General Settings]
                                    Write Extended Currentdat=1

                                    If it doesn't exist add it.

                                    If I run the files from the examples.zip off the manual website
                                    (action.txt and csv.txt) to produce a csv file, it works correctly with
                                    the Write Extended Currentdat=1
                                    I see the same results you get in your csv when it is turned off or not
                                    listed in the WUHU Configuration.INI.

                                    Here is my output from the examples.zip action.txt and csv.txt:
                                    Using:
                                    template:"c:\program files\wuhu\templates\csv.txt"
                                    "z:\root\data\data_test.csv+"

                                    http://weather.lissproductions.com/data/data_test.csv

                                    -John


                                    On 5/6/2012 11:02 AM, Tom Wassmer wrote:
                                    > I also added my configuration file, the modified Action.txt and the NON-MODIFIED csv.txt and HighsAndLows.txt templates that I use and the current WUHU Configuration Data.ini file.
                                    >
                                    > Thanks in advance...
                                    >
                                    > Tom
                                    >
                                    > --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@...> wrote:
                                    >> Hi again,
                                    >>
                                    >> The created data files are in folder:
                                    >> http://tech.dir.groups.yahoo.com/group/wuhu_software_group/files/Siena%20Heights/
                                    >>
                                    >> They are expanded every 5 minutes so data.csv is now more than 5MB but only contains field names - no data. I do not have access to the configuration file from home. Would that help you to see if I did not set the settings right?
                                    >>
                                    >> Thanks, Tom
                                    >>
                                    >> --- In wuhu_software_group@yahoogroups.com, "H. Smith"<wuhu_software@> wrote:
                                    >>>
                                    >>>
                                    >>> Tom,
                                    >>>
                                    >>> I do not see your attachments.
                                    >>>
                                    >>> You can make a folder in the files area of the group and upload them. After we are done with them we can delete the folder. Just make sure you tell us where you posted them.
                                    >>>
                                    >>> As I mentioned to the other user, you must enable the writing of the currdat.lst in the general section. Enable write extended data as well.
                                    >>>
                                    >>>
                                    >>>
                                    >>> ________________________________
                                    >>> From: Tom Wassmer<twassmer@>
                                    >>> To: wuhu_software_group@yahoogroups.com
                                    >>> Sent: Saturday, May 5, 2012 6:17 PM
                                    >>> Subject: [wuhu_software_group] Re: Newbie Question about Davis Vantage Pro2 with WUHU
                                    >>>
                                    >>>
                                    >>> Â
                                    >>> Hi John,
                                    >>>
                                    >>> I tried that now it creates the two files but they do not contain data but just the field variables of the template file. See attached files.
                                    >>>
                                    >>> Thanks in advance!
                                    >>>
                                    >>> Tom
                                    >>>
                                    >>> P.S. How can I upload these files?
                                    >>>
                                    >>> --- In wuhu_software_group@yahoogroups.com, John Liss<john@> wrote:
                                    >>>> Hey Tom,
                                    >>>>
                                    >>>> That's because the line that contains 'template:' generates your data file.
                                    >>>> Another way of putting it is the 'template:' command creates the data.csv
                                    >>>>
                                    >>>> You don't need to copy it to W: if it is being created on W:
                                    >>>>
                                    >>>> Try just:
                                    >>>>
                                    >>>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                                    >>>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.html"
                                    >>>>
                                    >>>>
                                    >>>> The + on the data.csv means it will keep adding data to that file.
                                    >>>> The highsandlows.txt is a template to create a html page.
                                    >>>>
                                    >>>> Next step is make sure you have turned on Alerts/Actions.
                                    >>>> http://www.lissproductions.org/wuhu_manual/the-wuhu-software-manual/exporting-data-out-of-wuhu/create-a-csv-file-with-wuhu/
                                    >>>>
                                    >>>> -John
                                    >>>>
                                    >>>> On 5/4/2012 8:15 AM, Tom Wassmer wrote:
                                    >>>>> Thanks again. I use the original templates. I did only change the action.txt - I try to create the data file in the program directory and then copy them to a net drive, which is W:. Unfortunately, no data file is created in the /data directory of the program location - and I get a copy error to W: - I also tried to use the network ID instead \\Halo/Weatherstation but it also gives me a copy error in the log. What do I do wrong? Can it be a user rights issue?
                                    >>>>>
                                    >>>>> Thanks, Tom
                                    >>>>>
                                    >>>>>
                                    >>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                    >>>>>> Are the templates not working correctly?
                                    >>>>>>
                                    >>>>>> Everything looks Ok except on the file copy commands, there is no + needed at the end of the file name. I do not believe that the copy command will append, it always overwrites the destination file.
                                    >>>>>>
                                    >>>>>> I would need to see your source templates, templates\csv.txt and templates\highsandlows.txt.
                                    >>>>>>
                                    >>>>>> Were the output files on w:\ created?
                                    >>>>>>
                                    >>>>>> You can send me your templates and output files via email to wuhu_software at yahoo.com. If there is a problem with the template please also send a description of the problem if it is not obvious.
                                    >>>>>>
                                    >>>>>>
                                    >>>>>>
                                    >>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                                    >>>>>>> Thanks,
                                    >>>>>>>
                                    >>>>>>> I followed the guide and changed the WHU Configuration.ini to enable the Write Extended Currentdat Setting. Then I changed the sample Actions.txt to the below - however, no files are created until now...
                                    >>>>>>>
                                    >>>>>>> Thanks in advance!
                                    >>>>>>>
                                    >>>>>>> Tom
                                    >>>>>>>
                                    >>>>>>> template:"C:\Program Files\WUHU\templates\csv.txt" "W:\Weather Station\SienaHei\data.csv+"
                                    >>>>>>> template:"C:\Program Files\WUHU\templates\highsandlows.txt" "W:\Weather Station\SienaHei\HighsAndLows.txt+"
                                    >>>>>>> copy:"C:\Program Files\WUHU\data\data.csv" "W:\Weather Station\SienaHei\data2.csv+"
                                    >>>>>>> copy:"C:\Program Files\WUHU\data\HighsAndLows.txt" "W:\Weather Station\SienaHei\HighsAndLows2.txt+"
                                    >>>>>>>
                                    >>>>>>>
                                    >>>>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                    >>>>>>>> Yes, you can save data every minute. By default it saves many readings per minute on a Davis, every 3-4 seconds.
                                    >>>>>>>>
                                    >>>>>>>> The default format of the data is the La Crosse Heavy Weather Pro binary format. This is cannot be directly imported to other applications.
                                    >>>>>>>>
                                    >>>>>>>> You probably want a .csv (comma separated values) file that you can directly pull in to programs like Excel. To do this you will need to create what is called a template that executes every one minute. See the online user manual for how to create a template and post here if you have questions.
                                    >>>>>>>>
                                    >>>>>>>> There are also printable charts creating within the program. If you are only after charts, that might suffice.
                                    >>>>>>>>
                                    >>>>>>>>
                                    >>>>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<twassmer@> wrote:
                                    >>>>>>>>> --- In wuhu_software_group@yahoogroups.com, "wuhu_software"<wuhu_software@> wrote:
                                    >>>>>>>>>> 1) I am not sure what you are saying. If you want to run WUHU and Weatherlink at the same time look in to a program called VirtualVP.
                                    >>>>>>>>> Thanks. I will check this out. My main concern is that I want to keep a history file with the original 1 min. resolution. Does WUHU save all data and in which file and format?
                                    >>>>>>>>>
                                    >>>>>>>>>
                                    >>>>>>>>>> 2) What form of data are you talking about? In the history.dat? In a .csv file? Please be more specific.
                                    >>>>>>>>> I don't care about the format as long as it is easy to export and use in any plotting program.
                                    >>>>>>>>>
                                    >>>>>>>>>
                                    >>>>>>>>>> 3) Un-check "Show console Com. errors" in the log screen and you will not see these messages. That feature is for debugging and is normally not enabled.
                                    >>>>>>>>> Thanks. I will try.
                                    >>>>>>>>>
                                    >>>>>>>>> Best, Tom
                                    >>>>>>>>>
                                    >>>>>>>>>
                                    >>>>>>>>>> --- In wuhu_software_group@yahoogroups.com, "Tom Wassmer"<tom@> wrote:
                                    >>>>>>>>>>> Hi everybody,
                                    >>>>>>>>>>>
                                    >>>>>>>>>>> I successfully connected our Davis Vantage Pro2 station through WUHU with Weather Underground (KMIADRIA4). Our weather station is the USB model so I had to find out by trial and error, which COM port the virtual serial port was mapped to - in my case COM3. It now works but I have a few questions and issues:
                                    >>>>>>>>>>> 1.) As I needed to use a virtual usb to com port to connect WUHU, I cannot run WeatherLink to locally safe our data onto the specified net drive in our university network. How can I easily setup that all data are locally saved at 1 min. values?
                                    >>>>>>>>>>> 2.) The log function records some things that I am not sure if they are error messages or just status reports:
                                    >>>>>>>>>>>
                                    >>>>>>>>>>> Tue May 01 13:02:33 2012> Console clock time: Tue May 01 13:01:00 2012.
                                    >>>>>>>>>>> Tue May 01 13:02:33 2012> Console Battery Voltage: 4.69
                                    >>>>>>>>>>> Tue May 01 13:02:33 2012> All transmitter batteries are Ok.
                                    >>>>>>>>>>> Tue May 01 13:02:33 2012> All repeater batteries are Ok.
                                    >>>>>>>>>>> Tue May 01 13:02:35 2012> Transmitter ID #0 is of type "ISS_TX - An ISS station configured as an ISS.", No repeater
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Reception Data (Since Midnight): Packets Received: 1457, Total Packets Missed: 3, Number of Resyncs: 0, Max In a Row: 1079, CRC Errors: 0.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor temperature.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor temperature.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor humidity.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving indoor humidity.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor dew point.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind chill.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind speed and direction.
                                    >>>>>>>>>>> Tue May 01 13:02:38 2012> Retrieving outdoor wind gust (slow).
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving outdoor wind gust failed or is not supported by this console, manually calculating wind gust based on wind speed.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving rainfall total.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving daily rainfall.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving relative pressure.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving absolute pressure (cached).
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving solar radiation.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving solar UV.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving ET data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors temperature data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors humidity data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil temperature data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors soil moisture data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf temperature data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Retrieving extra sensors leaf wetness data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> All data collected successfully, post processing weather data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Post processing weather data.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Post processing of weather succeeded.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Completed data collection routine.
                                    >>>>>>>>>>> Tue May 01 13:02:39 2012> Calling Read().
                                    >>>>>>>>>>> Tue May 01 13:02:41 2012> Read() succeeded, continuing to process.
                                    >>>>>>>>>>> Tue May 01 13:02:42 2012> Console clock time: Tue May 01 13:01:00 2012.
                                    >>>>>>>>>>> Tue May 01 13:02:42 2012> Console Battery Voltage: 4.69
                                    >>>>>>>>>>> Tue May 01 13:02:42 2012> All transmitter batteries are Ok.
                                    >>>>>>>>>>> Tue May 01 13:02:42 2012> All repeater batteries are Ok.
                                    >>>>>>>>>>>
                                    >>>>>>>>>>> 3.) I installed the software with my faculty login but specified that it is installed for all users. However, if I log off, WUHU is shut down. Do I need to start WUHU from a low privilege account and always keep this account running on the machine?
                                    >>>>>>>>>>>
                                    >>>>>>>>>>> Thanks soo much in advance!
                                    >>>>>>>>>>>
                                    >>>>>>>>>>> Tom
                                    >>>>>>>>>>>
                                    >>>>>
                                    >>>>>
                                    >>>>> ------------------------------------
                                    >>>>>
                                    >>>>> To visit your group on the web, go to:
                                    >>>>> http://groups.yahoo.com/group/wuhu_software_group/
                                    >>>>>
                                    >>>>> Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                                    >>>>>
                                    >>>>> To unsubscribe from this group, send an email to:
                                    >>>>> wuhu_software_group-unsubscribe@yahoogroups.com
                                    >>>>>
                                    >>>>> WUHU Download page:
                                    >>>>> http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                                    >>>>>
                                    >>>>>
                                    >>>>>
                                    >
                                    >
                                    >
                                    > ------------------------------------
                                    >
                                    > To visit your group on the web, go to:
                                    > http://groups.yahoo.com/group/wuhu_software_group/
                                    >
                                    > Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
                                    >
                                    > To unsubscribe from this group, send an email to:
                                    > wuhu_software_group-unsubscribe@yahoogroups.com
                                    >
                                    > WUHU Download page:
                                    > http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
                                    >
                                    >
                                    >
                                  Your message has been successfully submitted and would be delivered to recipients shortly.