Loading ...
Sorry, an error occurred while loading the content.
 

Re: Can I delete my wind data?

Expand Messages
  • wuhu_software
    I use 100% silicon lubricant and that works well. It really does make a difference especially if the sensor has been up for a few years.
    Message 1 of 8 , Oct 23, 2011
      I use 100% silicon lubricant and that works well. It really does make a difference especially if the sensor has been up for a few years.

      --- In wuhu_software_group@yahoogroups.com, Jaye Ellen Burke <jaye.ellen@...> wrote:
      >
      > Might be as simple as a shot of WD-40 in the rotational part too ...
      >
      > On Sun, Oct 23, 2011 at 9:35 AM, Ken <yahoo@...> wrote:
      >
      > > **
      > >
      > >
      > > I disabled it and am again getting data to WUHU. The stored data isn't a
      > > problem. WU's history is adequate for my interest.
      > >
      > > I have a 2317 and the wind speed has been failing for some time. I don't
      > > think it was ever right. All the reading would sawtooth from zero to speed.
      > > It didn't seem capable of reporting sustained winds.
      > >
      > > I look at the price of a replacement -- $35. I think I'll just limp along
      > > with wind disabled and think about upgrading the system to a better vendor.
      > > The wireless never worked right and having to run a wire from the unit is an
      > > annoyance.
      > >
      > > Live and learn.
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > <wuhu_software@> wrote:
      > > >
      > > >
      > > > You can disable the wind sensor under the tweak screen however if the
      > > data was already processed and uploaded, that is a different issue.
      > > >
      > > > If you want to clean up your local history.dat file, you can close WUHU,
      > > open a copy of WS-36XX and edit the file. I think there is also a freeware
      > > editor out there for the La Crosse old and new file formats.
      > > >
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "Ken" <yahoo@> wrote:
      > > > >
      > > > > Sorry I wasn't clear. I would like to disable wind at the source. WUHU
      > > errors with bad wind speed.
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > <wuhu_software@> wrote:
      > > > > >
      > > > > >
      > > > > > I am not sure which data you mean, data that has not yet been sent to
      > > WU? Where is the data? In the console but not yet read by WUHU?
      > > > > >
      > > > > > Once it is uploaded to WU, you can delete bad entries from your
      > > tabular history data. See "Delete specific entries" at the very bottom of
      > > your history page there.
      > > > > >
      > > > > >
      > > > > > --- In wuhu_software_group@yahoogroups.com, "Ken" <yahoo@> wrote:
      > > > > > >
      > > > > > > My wind reporting is erroring. I would like to eliminate that data
      > > so that the other data can be sent. Is that possible?
      > > > > > >
      > > > > >
      > > > >
      > > >
      > >
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.