Loading ...
Sorry, an error occurred while loading the content.

Re: transmission problem ws2316

Expand Messages
  • Dimitris
    Hi Joseph Take a look here how you replace the antenna http://users.otenet.gr/~meteo/project_replace-antenna-weather-station.html Best regards from Greece
    Message 1 of 4 , Apr 1 2:07 AM
    View Source
    • 0 Attachment
      Hi Joseph
      Take a look here how you replace the antenna


      http://users.otenet.gr/~meteo/project_replace-antenna-weather-station.html


      Best regards from Greece
      Dimitris
      http://users.otenet.gr/~meteo/index.html



      --- In wuhu_software_group@yahoogroups.com, Joseph Kareh <josephkareh@...> wrote:
      >
      > Dear forum
      >
      > my base are far away from the thermo hygro sensor and many walls between the
      > materials,
      >
      > and i am obliged to use wireless mode since no way to use the cables since i
      > have ground issues.
      >
      > therefore i am facing a problem of miss receiving data frequently, is there
      > anyway to increase the signal ?????
      > for ex repeater or else materials.
      >
      > regards
      >  Joseph A. Kareh
      > josephkareh@...
      > www.jkajaltoun.localweatherview.net
      >
    • Joseph Kareh
      i already did it Dimitris, i fix new antenna cables inside the base (30cm) and inside the thermo sensor to ouside (10cm)  same as its mentioned in your link
      Message 2 of 4 , Apr 4 2:13 AM
      View Source
      • 0 Attachment
        i already did it Dimitris,
         
        i fix new antenna cables inside the base (30cm) and inside the thermo sensor to ouside (10cm)  same as its mentioned in your link
        but i realize that the interference increased!!! do you have any suggestion?
         
        other thing Dimitris can i extend the cable between the base and the pc ????
         
         
         
        have a nice day
         
        Joseph A. Kareh
        josephkareh@...
        www.jkajaltoun.localweatherview.net



        From: Dimitris <meteo@...>
        To: wuhu_software_group@yahoogroups.com
        Sent: Fri, April 1, 2011 12:07:43 PM
        Subject: [wuhu_software_group] Re: transmission problem ws2316

         

        Hi Joseph
        Take a look here how you replace the antenna

        http://users.otenet.gr/~meteo/project_replace-antenna-weather-station.html

        Best regards from Greece
        Dimitris
        http://users.otenet.gr/~meteo/index.html

        --- In wuhu_software_group@yahoogroups.com, Joseph Kareh <josephkareh@...> wrote:
        >
        > Dear forum
        >
        > my base are far away from the thermo hygro sensor and many walls between the
        > materials,
        >
        > and i am obliged to use wireless mode since no way to use the cables since i
        > have ground issues.
        >
        > therefore i am facing a problem of miss receiving data frequently, is there
        > anyway to increase the signal ?????
        > for ex repeater or else materials.
        >
        > regards
        >  Joseph A. Kareh
        > josephkareh@...
        > www.jkajaltoun.localweatherview.net
        >

      • Dimitris
        Hi Joseph You must put cable antenna 34,6 cm L /2 tuning wave 433 Mhz ,and not 30 cm,and not only 10 cm antenna out remote sensor. You can extend the cable
        Message 3 of 4 , Apr 4 2:35 AM
        View Source
        • 0 Attachment
          Hi Joseph

          You must put cable antenna 34,6 cm L /2 tuning wave 433 Mhz ,and not 30 cm,and not only 10 cm antenna out remote sensor.

          You can extend the cable between the base and the pc,if i am correct you use usb-serial adaptor.You can use simple usb cable 5 meters ,if you want more meters must you buy usb booster cable,every one from it is 5 meters ,you can work 3 piece five meters cable total lenght 15 meters.

          http://www.data-alliance.net/-strse-74/USB-2.0-Active-Repeater/Detail.bok


          This is a total 10 meters

          http://www.amazon.com/gp/product/B002VG39BI/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=1278548962&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B001LWZ4BG&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0TG3PF88RZPXNEW2PFVR

          Or if you need more meters usb extender via cat 5

          http://www.networktechinc.com/usbc5.html

          Best regards from Greece
          Dimitris
          http://users.otenet.gr/~meteo/index.html



          --- In wuhu_software_group@yahoogroups.com, Joseph Kareh <josephkareh@...> wrote:
          >
          > i already did it Dimitris,
          >
          > i fix new antenna cables inside the base (30cm) and inside the thermo sensor to
          > ouside (10cm)  same as its mentioned in your link
          > but i realize that the interference increased!!! do you have any suggestion?
          >
          > other thing Dimitris can i extend the cable between the base and the pc ????
          >
          >
          >
          > have a nice day
          >  Joseph A. Kareh
          > josephkareh@...
          > www.jkajaltoun.localweatherview.net
          >
          >
          >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.