Loading ...
Sorry, an error occurred while loading the content.

Re: [wuhu_software_group] Re: Help Needed with LaCrosse WS-2316

Expand Messages
  • SmokeyBehr
    You may need to carefully disassemble the wind sensor and bend the battery clips in a little bit. That s what I had to do to make my system work after messing
    Message 1 of 4 , Mar 24, 2011
    • 0 Attachment
      You may need to carefully disassemble the wind sensor and bend the
      battery clips in a little bit. That's what I had to do to make my
      system work after messing with it for 3 days trying to get it to work.
      On Wed, 09 Mar 2011 22:42:17 -0000, you wrote:

      >Thanks for your info. I am cordless from the sensor to the console.
      >Not sure if the console is fried or what??
      >
      >--- In wuhu_software_group@yahoogroups.com, "flag_buff" <NH4x4Jeep@...> wrote:
      >>
      >> I frequently got this error when I tried to extend the cord from the console to the computer and got my cables wrong. It was VERY frustrating. I used phone cables and they were reversed... or straight through. So, if I only had the reversed cables, I'd have to actually use two so that the wire reversals canceled themselves out... I've also had problems with the cables not connecting properly (inside the insulating sleeve) - i.e. twist it slightly and it works... :-p
      >>
      >> Perhaps try different cables or a different comm port too...
      >>
      >> I don't know if it will help or not, but that's MY experience with these errors...
      >>
      >> Jon G
      >>
      >> P.S. Are you running corded or wireless for the sensor to console run?
      >>
      >>
      >> --- In wuhu_software_group@yahoogroups.com, "BrookK" <babblebck@> wrote:
      >> >
      >> > Greetings ! Not sure what is going on with this station but perhaps someone can help.This station has worked perfectly for 1 1/2 years until now.
      >> >
      >> > -Noticed that the console was not showing outside readings.
      >> >
      >> > -Changed Outside sensor batteries and reset.
      >> >
      >> > -Outside readings showed up except for wind direction/wind speed.
      >> >
      >> > -Changed inside console batteries and reset entire unit.
      >> >
      >> > -Rain data not working either.
      >> >
      >> > -Noticed that the Heavy Weather software was recording data but the weather underground/heavy weather up-loader was not doing anything.
      >> > Getting a constant error of....Tue Mar 08 17:43:48 2011 > Communications error or invalid/corrupt data retrieved from console.
      >> >
      >> > Any help/advice is appreciated.
      >> >
      >>
      >
      >
      >
      >
      >------------------------------------
      >
      >To visit your group on the web, go to:
      >http://groups.yahoo.com/group/wuhu_software_group/
      >
      >Want more or less group messages (Special notices as a minimum)?http://groups.yahoo.com/group/wuhu_software_group/join
      >
      >To unsubscribe from this group, send an email to:
      >wuhu_software_group-unsubscribe@yahoogroups.com
      >
      >WUHU Download page:
      >http://home.comcast.net/~wuhu_software/Yahoo! Groups Links
      >
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.