Loading ...
Sorry, an error occurred while loading the content.

Re: Rain Total Alarm

Expand Messages
  • ronw72
    Thanks, That sounds logical and must have been what happened. Ron
    Message 1 of 7 , Jan 26, 2011
    • 0 Attachment
      Thanks,

      That sounds logical and must have been what happened.

      Ron

      --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
      >
      > I think I see the problem.
      >
      > In the specs for the WS-23XX is 0 to 98.38 inches (Total rainfall).
      >
      > It probably reached the max value and rolled over to zero.
      >
      >
      > --- In wuhu_software_group@yahoogroups.com, "ronw72" <1rondee@> wrote:
      > >
      > >
      > >
      > > The rain total now reads 0.59, as near as I can remember it was somewhere in the 98". Yesterday I did acknowledge a storm alarm from the console, but did not do anything with rain totals.
      > >
      > > Thanks,
      > >
      > > Ron
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
      > > >
      > > >
      > > > That is odd... Can you check the console to see if it is now zero? Was it 98.28 previously as the log stated?
      > > >
      > > > If it did reset, it is impossible to know how or why. If you did not do it, the software can not do it unless you hit that new Reset button on the main screen.
      > > >
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "ronw72" <1rondee@> wrote:
      > > > >
      > > > > wuhu_software,
      > > > >
      > > > > But I didn't reset my console rain total, I didn't touch the console at all.
      > > > >
      > > > > This is puzzling?
      > > > >
      > > > > Ron
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
      > > > > >
      > > > > >
      > > > > > Ron,
      > > > > >
      > > > > > This will happen if you reset your console rain total without first disabling all rainfall reporting (required).
      > > > > >
      > > > > >
      > > > > > --- In wuhu_software_group@yahoogroups.com, "ronw72" <1rondee@> wrote:
      > > > > > >
      > > > > > > Tue Jan 25 17:21:17 2011 > Rain Total reading of 0.00 Inches detected when the average rain Total is 98.28 Inches (over past 10 minutes). Replaced with average value that was calculated over the past 10 minutes.
      > > > > > > Tue Jan 25 17:21:17 2011 > To correct the rain total, under the Tweak screen, select 'Disable All Rainfall Reporting', click 'Save Settings' button. Wait for update from console on the main screen. Go back to Tweak screen, un-check 'Disable All Rainfall Reporting', click 'Save Settings' button.
      > > > > > >
      > > > > > > This is the first time I have encountered this alarm, it lasted for a little over two minutes before I noticed it.
      > > > > > >
      > > > > > > I tried the suggested remedy but nothing happened. The alarm cleared on its own.
      > > > > > >
      > > > > > > Could someone please explain this alarm and what I should be concerned with?
      > > > > > >
      > > > > > > Thanks,
      > > > > > >
      > > > > > > Ron
      > > > > > >
      > > > > >
      > > > >
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.