Loading ...
Sorry, an error occurred while loading the content.

Re: Setup help

Expand Messages
  • wuhu_software
    In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated? Please send me the wu.txt file in
    Message 1 of 15 , Dec 1, 2010
    View Source
    • 0 Attachment
      In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?

      Please send me the wu.txt file in email to wuhu_software at yahoo.com.


      --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@...> wrote:
      >
      >
      >
      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
      > >I'm using WV32 V 7.0 with WU Heavyweather uploader
      > >
      > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
      > >
      > > What kind of station is this? Are you using Heavyweather or some other application?
      > >
      > > The more details the better.
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
      > > >
      > > >
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
      > > > >Thats the bad part all my dials read zero
      > > > >
      > > > > If the data on your screen makes sense, do not worry about it.
      > > > >
      > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
      > > > >
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
      > > > > >
      > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
      > > > > >
      > > > >
      > > >
      > >
      >
    • davewierstad
      Message 2 of 15 , Dec 2, 2010
      View Source
      • 0 Attachment
        --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
        >Were do I find the wu txt file? the one thats generated is the log file and it cant be copyed and pasted
        >
        > In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?
        >
        > Please send me the wu.txt file in email to wuhu_software at yahoo.com.
        >
        >
        > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
        > >
        > >
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
        > > >I'm using WV32 V 7.0 with WU Heavyweather uploader
        > > >
        > > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
        > > >
        > > > What kind of station is this? Are you using Heavyweather or some other application?
        > > >
        > > > The more details the better.
        > > >
        > > >
        > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
        > > > >
        > > > >
        > > > >
        > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
        > > > > >Thats the bad part all my dials read zero
        > > > > >
        > > > > > If the data on your screen makes sense, do not worry about it.
        > > > > >
        > > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
        > > > > >
        > > > > >
        > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
        > > > > > >
        > > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
        > > > > > >
        > > > > >
        > > > >
        > > >
        > >
        >
      • wuhu_software
        Search the hard drive for wu.txt. I am not sure what you have pointed WUHU to in the Setup section, what file did you point it to?
        Message 3 of 15 , Dec 2, 2010
        View Source
        • 0 Attachment
          Search the hard drive for wu.txt.

          I am not sure what you have pointed WUHU to in the Setup section, what file did you point it to?



          --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@...> wrote:
          >
          >
          >
          > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
          > >Were do I find the wu txt file? the one thats generated is the log file and it cant be copyed and pasted
          > >
          > > In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?
          > >
          > > Please send me the wu.txt file in email to wuhu_software at yahoo.com.
          > >
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
          > > >
          > > >
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
          > > > >I'm using WV32 V 7.0 with WU Heavyweather uploader
          > > > >
          > > > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
          > > > >
          > > > > What kind of station is this? Are you using Heavyweather or some other application?
          > > > >
          > > > > The more details the better.
          > > > >
          > > > >
          > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
          > > > > >
          > > > > >
          > > > > >
          > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
          > > > > > >Thats the bad part all my dials read zero
          > > > > > >
          > > > > > > If the data on your screen makes sense, do not worry about it.
          > > > > > >
          > > > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
          > > > > > >
          > > > > > >
          > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
          > > > > > > >
          > > > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
          > > > > > > >
          > > > > > >
          > > > > >
          > > > >
          > > >
          > >
          >
        • davewierstad
          Sat Dec 04 14:42:09 2010 WUHU monitoring stopped. Sat Dec 04 14:42:39 2010 WUHU monitoring started (WUHU21632D). Sat Dec 04 14:42:39 2010 Monitoring
          Message 4 of 15 , Dec 4, 2010
          View Source
          • 0 Attachment
            Sat Dec 04 14:42:09 2010 > WUHU monitoring stopped.
            Sat Dec 04 14:42:39 2010 > WUHU monitoring started (WUHU21632D).
            Sat Dec 04 14:42:39 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU History.dat".
            Sat Dec 04 14:42:39 2010 > Weather Underground ID: KMNNORTH13
            Sat Dec 04 14:48:40 2010 > WUHU monitoring stopped.
            Sat Dec 04 14:49:13 2010 > WUHU monitoring started (WUHU21632W).
            Sat Dec 04 14:49:13 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log.txt".
            Sat Dec 04 14:49:13 2010 > Weather Underground ID: KMNNORTH13
            Sat Dec 04 14:59:13 2010 > Alarm Console Failure has been activated.
            Sat Dec 04 15:39:14 2010 > Alarm Console Failure has been activated.
            Sat Dec 04 15:41:40 2010 > WUHU monitoring stopped.
            Sat Dec 04 15:42:04 2010 > WUHU monitoring started (WUHU21632D).
            Sat Dec 04 15:42:04 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
            Sat Dec 04 15:42:04 2010 > Weather Underground ID: KMNNORTH13
            Sat Dec 04 15:42:30 2010 > WUHU monitoring stopped.
            Sat Dec 04 15:44:57 2010 > WUHU monitoring started (WUHU21632D).
            Sat Dec 04 15:44:57 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
            Sat Dec 04 15:44:57 2010 > Weather Underground ID: KMNNORTH13
            Sat Dec 04 15:51:40 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
            Sat Dec 04 15:51:40 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
            Sat Dec 04 15:51:40 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
            Sat Dec 04 15:51:40 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
            Sat Dec 04 15:51:40 2010 > Alarm Data Rejected has been activated.
            Sat Dec 04 15:51:40 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
            Sat Dec 04 15:54:58 2010 > Alarm Console Failure has been activated.
            Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been deactivated.
            Sat Dec 04 16:21:38 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
            Sat Dec 04 16:21:38 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
            Sat Dec 04 16:21:38 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
            Sat Dec 04 16:21:38 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
            Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been activated.
            Sat Dec 04 16:21:38 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.


            --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
            >
            >
            > Search the hard drive for wu.txt.
            >
            > I am not sure what you have pointed WUHU to in the Setup section, what file did you point it to?
            >
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
            > >
            > >
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > > >Were do I find the wu txt file? the one thats generated is the log file and it cant be copyed and pasted
            > > >
            > > > In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?
            > > >
            > > > Please send me the wu.txt file in email to wuhu_software at yahoo.com.
            > > >
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
            > > > >
            > > > >
            > > > >
            > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > > > > >I'm using WV32 V 7.0 with WU Heavyweather uploader
            > > > > >
            > > > > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
            > > > > >
            > > > > > What kind of station is this? Are you using Heavyweather or some other application?
            > > > > >
            > > > > > The more details the better.
            > > > > >
            > > > > >
            > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
            > > > > > >
            > > > > > >
            > > > > > >
            > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > > > > > > >Thats the bad part all my dials read zero
            > > > > > > >
            > > > > > > > If the data on your screen makes sense, do not worry about it.
            > > > > > > >
            > > > > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
            > > > > > > >
            > > > > > > >
            > > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
            > > > > > > > >
            > > > > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
            > > > > > > > >
            > > > > > > >
            > > > > > >
            > > > > >
            > > > >
            > > >
            > >
            >
          • wuhu_software
            Dave, If you are looking for the .dat file to monitor, point WUHU to the STATION_Data_01.Dat located in the WV32 folder where STATION is the type of station
            Message 5 of 15 , Dec 4, 2010
            View Source
            • 0 Attachment
              Dave,

              If you are looking for the .dat file to monitor, point WUHU to the STATION_Data_01.Dat located in the WV32 folder where STATION is the type of station you own.

              In the General Settings of WUHU, set the station type to WV32 - Weather Station Data File (*.dat) then hit the Change button to browse for the above mentioned file.

              Like I said before, the support for WV32 is very limited as I recall.

              --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@...> wrote:
              >
              > Sat Dec 04 14:42:09 2010 > WUHU monitoring stopped.
              > Sat Dec 04 14:42:39 2010 > WUHU monitoring started (WUHU21632D).
              > Sat Dec 04 14:42:39 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU History.dat".
              > Sat Dec 04 14:42:39 2010 > Weather Underground ID: KMNNORTH13
              > Sat Dec 04 14:48:40 2010 > WUHU monitoring stopped.
              > Sat Dec 04 14:49:13 2010 > WUHU monitoring started (WUHU21632W).
              > Sat Dec 04 14:49:13 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log.txt".
              > Sat Dec 04 14:49:13 2010 > Weather Underground ID: KMNNORTH13
              > Sat Dec 04 14:59:13 2010 > Alarm Console Failure has been activated.
              > Sat Dec 04 15:39:14 2010 > Alarm Console Failure has been activated.
              > Sat Dec 04 15:41:40 2010 > WUHU monitoring stopped.
              > Sat Dec 04 15:42:04 2010 > WUHU monitoring started (WUHU21632D).
              > Sat Dec 04 15:42:04 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
              > Sat Dec 04 15:42:04 2010 > Weather Underground ID: KMNNORTH13
              > Sat Dec 04 15:42:30 2010 > WUHU monitoring stopped.
              > Sat Dec 04 15:44:57 2010 > WUHU monitoring started (WUHU21632D).
              > Sat Dec 04 15:44:57 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
              > Sat Dec 04 15:44:57 2010 > Weather Underground ID: KMNNORTH13
              > Sat Dec 04 15:51:40 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
              > Sat Dec 04 15:51:40 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
              > Sat Dec 04 15:51:40 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
              > Sat Dec 04 15:51:40 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
              > Sat Dec 04 15:51:40 2010 > Alarm Data Rejected has been activated.
              > Sat Dec 04 15:51:40 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
              > Sat Dec 04 15:54:58 2010 > Alarm Console Failure has been activated.
              > Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been deactivated.
              > Sat Dec 04 16:21:38 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
              > Sat Dec 04 16:21:38 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
              > Sat Dec 04 16:21:38 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
              > Sat Dec 04 16:21:38 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
              > Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been activated.
              > Sat Dec 04 16:21:38 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
              >
              >
              > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > >
              > >
              > > Search the hard drive for wu.txt.
              > >
              > > I am not sure what you have pointed WUHU to in the Setup section, what file did you point it to?
              > >
              > >
              > >
              > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
              > > >
              > > >
              > > >
              > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > > >Were do I find the wu txt file? the one thats generated is the log file and it cant be copyed and pasted
              > > > >
              > > > > In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?
              > > > >
              > > > > Please send me the wu.txt file in email to wuhu_software at yahoo.com.
              > > > >
              > > > >
              > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
              > > > > >
              > > > > >
              > > > > >
              > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > > > > >I'm using WV32 V 7.0 with WU Heavyweather uploader
              > > > > > >
              > > > > > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
              > > > > > >
              > > > > > > What kind of station is this? Are you using Heavyweather or some other application?
              > > > > > >
              > > > > > > The more details the better.
              > > > > > >
              > > > > > >
              > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
              > > > > > > >
              > > > > > > >
              > > > > > > >
              > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > > > > > > >Thats the bad part all my dials read zero
              > > > > > > > >
              > > > > > > > > If the data on your screen makes sense, do not worry about it.
              > > > > > > > >
              > > > > > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
              > > > > > > > >
              > > > > > > > >
              > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
              > > > > > > > > >
              > > > > > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
              > > > > > > > > >
              > > > > > > > >
              > > > > > > >
              > > > > > >
              > > > > >
              > > > >
              > > >
              > >
              >
            • davewierstad
              Message 6 of 15 , Dec 4, 2010
              View Source
              • 0 Attachment
                --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
                >I have one stupid ? I have two computers in my room the one I'm trying to setup wuhu does not have my wv32 station on it,the second compu is the one thats running the wv32 software,do I have to setup wuhu software on THAT compu?
                >
                > Dave,
                >
                > If you are looking for the .dat file to monitor, point WUHU to the STATION_Data_01.Dat located in the WV32 folder where STATION is the type of station you own.
                >
                > In the General Settings of WUHU, set the station type to WV32 - Weather Station Data File (*.dat) then hit the Change button to browse for the above mentioned file.
                >
                > Like I said before, the support for WV32 is very limited as I recall.
                >
                > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                > >
                > > Sat Dec 04 14:42:09 2010 > WUHU monitoring stopped.
                > > Sat Dec 04 14:42:39 2010 > WUHU monitoring started (WUHU21632D).
                > > Sat Dec 04 14:42:39 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU History.dat".
                > > Sat Dec 04 14:42:39 2010 > Weather Underground ID: KMNNORTH13
                > > Sat Dec 04 14:48:40 2010 > WUHU monitoring stopped.
                > > Sat Dec 04 14:49:13 2010 > WUHU monitoring started (WUHU21632W).
                > > Sat Dec 04 14:49:13 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log.txt".
                > > Sat Dec 04 14:49:13 2010 > Weather Underground ID: KMNNORTH13
                > > Sat Dec 04 14:59:13 2010 > Alarm Console Failure has been activated.
                > > Sat Dec 04 15:39:14 2010 > Alarm Console Failure has been activated.
                > > Sat Dec 04 15:41:40 2010 > WUHU monitoring stopped.
                > > Sat Dec 04 15:42:04 2010 > WUHU monitoring started (WUHU21632D).
                > > Sat Dec 04 15:42:04 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
                > > Sat Dec 04 15:42:04 2010 > Weather Underground ID: KMNNORTH13
                > > Sat Dec 04 15:42:30 2010 > WUHU monitoring stopped.
                > > Sat Dec 04 15:44:57 2010 > WUHU monitoring started (WUHU21632D).
                > > Sat Dec 04 15:44:57 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
                > > Sat Dec 04 15:44:57 2010 > Weather Underground ID: KMNNORTH13
                > > Sat Dec 04 15:51:40 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
                > > Sat Dec 04 15:51:40 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
                > > Sat Dec 04 15:51:40 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
                > > Sat Dec 04 15:51:40 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
                > > Sat Dec 04 15:51:40 2010 > Alarm Data Rejected has been activated.
                > > Sat Dec 04 15:51:40 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
                > > Sat Dec 04 15:54:58 2010 > Alarm Console Failure has been activated.
                > > Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been deactivated.
                > > Sat Dec 04 16:21:38 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
                > > Sat Dec 04 16:21:38 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
                > > Sat Dec 04 16:21:38 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
                > > Sat Dec 04 16:21:38 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
                > > Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been activated.
                > > Sat Dec 04 16:21:38 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
                > >
                > >
                > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > >
                > > >
                > > > Search the hard drive for wu.txt.
                > > >
                > > > I am not sure what you have pointed WUHU to in the Setup section, what file did you point it to?
                > > >
                > > >
                > > >
                > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                > > > >
                > > > >
                > > > >
                > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > > > >Were do I find the wu txt file? the one thats generated is the log file and it cant be copyed and pasted
                > > > > >
                > > > > > In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?
                > > > > >
                > > > > > Please send me the wu.txt file in email to wuhu_software at yahoo.com.
                > > > > >
                > > > > >
                > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                > > > > > >
                > > > > > >
                > > > > > >
                > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > > > > > >I'm using WV32 V 7.0 with WU Heavyweather uploader
                > > > > > > >
                > > > > > > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
                > > > > > > >
                > > > > > > > What kind of station is this? Are you using Heavyweather or some other application?
                > > > > > > >
                > > > > > > > The more details the better.
                > > > > > > >
                > > > > > > >
                > > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                > > > > > > > >
                > > > > > > > >
                > > > > > > > >
                > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > > > > > > > >Thats the bad part all my dials read zero
                > > > > > > > > >
                > > > > > > > > > If the data on your screen makes sense, do not worry about it.
                > > > > > > > > >
                > > > > > > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
                > > > > > > > > >
                > > > > > > > > >
                > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                > > > > > > > > > >
                > > > > > > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
                > > > > > > > > > >
                > > > > > > > > >
                > > > > > > > >
                > > > > > > >
                > > > > > >
                > > > > >
                > > > >
                > > >
                > >
                >
              • wuhu_software
                WUHU must be located on the same computer that runs WV32 otherwise it cannot receive updates.
                Message 7 of 15 , Dec 4, 2010
                View Source
                • 0 Attachment
                  WUHU must be located on the same computer that runs WV32 otherwise it cannot receive updates.


                  --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@...> wrote:
                  >
                  >
                  >
                  > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > >I have one stupid ? I have two computers in my room the one I'm trying to setup wuhu does not have my wv32 station on it,the second compu is the one thats running the wv32 software,do I have to setup wuhu software on THAT compu?
                  > >
                  > > Dave,
                  > >
                  > > If you are looking for the .dat file to monitor, point WUHU to the STATION_Data_01.Dat located in the WV32 folder where STATION is the type of station you own.
                  > >
                  > > In the General Settings of WUHU, set the station type to WV32 - Weather Station Data File (*.dat) then hit the Change button to browse for the above mentioned file.
                  > >
                  > > Like I said before, the support for WV32 is very limited as I recall.
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                  > > >
                  > > > Sat Dec 04 14:42:09 2010 > WUHU monitoring stopped.
                  > > > Sat Dec 04 14:42:39 2010 > WUHU monitoring started (WUHU21632D).
                  > > > Sat Dec 04 14:42:39 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU History.dat".
                  > > > Sat Dec 04 14:42:39 2010 > Weather Underground ID: KMNNORTH13
                  > > > Sat Dec 04 14:48:40 2010 > WUHU monitoring stopped.
                  > > > Sat Dec 04 14:49:13 2010 > WUHU monitoring started (WUHU21632W).
                  > > > Sat Dec 04 14:49:13 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log.txt".
                  > > > Sat Dec 04 14:49:13 2010 > Weather Underground ID: KMNNORTH13
                  > > > Sat Dec 04 14:59:13 2010 > Alarm Console Failure has been activated.
                  > > > Sat Dec 04 15:39:14 2010 > Alarm Console Failure has been activated.
                  > > > Sat Dec 04 15:41:40 2010 > WUHU monitoring stopped.
                  > > > Sat Dec 04 15:42:04 2010 > WUHU monitoring started (WUHU21632D).
                  > > > Sat Dec 04 15:42:04 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
                  > > > Sat Dec 04 15:42:04 2010 > Weather Underground ID: KMNNORTH13
                  > > > Sat Dec 04 15:42:30 2010 > WUHU monitoring stopped.
                  > > > Sat Dec 04 15:44:57 2010 > WUHU monitoring started (WUHU21632D).
                  > > > Sat Dec 04 15:44:57 2010 > Monitoring file: "C:\Program Files\WUHU\WUHU Log Messages.dat".
                  > > > Sat Dec 04 15:44:57 2010 > Weather Underground ID: KMNNORTH13
                  > > > Sat Dec 04 15:51:40 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
                  > > > Sat Dec 04 15:51:40 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
                  > > > Sat Dec 04 15:51:40 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
                  > > > Sat Dec 04 15:51:40 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
                  > > > Sat Dec 04 15:51:40 2010 > Alarm Data Rejected has been activated.
                  > > > Sat Dec 04 15:51:40 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
                  > > > Sat Dec 04 15:54:58 2010 > Alarm Console Failure has been activated.
                  > > > Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been deactivated.
                  > > > Sat Dec 04 16:21:38 2010 > Indoor temperature reading of 0.0 F detected. Value out of range (-14.1 to 139.8).
                  > > > Sat Dec 04 16:21:38 2010 > Indoor humidity reading of 0.0 percent detected. Value out of range (1 to 100).
                  > > > Sat Dec 04 16:21:38 2010 > Absolute air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45).
                  > > > Sat Dec 04 16:21:38 2010 > Relative air pressure reading of 1.00 InHg detected. Value out of range (8.85 to 32.45). To new users, have you set up your console's relative air pressure yet? See station user's manual.
                  > > > Sat Dec 04 16:21:38 2010 > Alarm Data Rejected has been activated.
                  > > > Sat Dec 04 16:21:38 2010 > One or more data items could not be automatically corrected, Ignoring ALL data on this update.
                  > > >
                  > > >
                  > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > > >
                  > > > >
                  > > > > Search the hard drive for wu.txt.
                  > > > >
                  > > > > I am not sure what you have pointed WUHU to in the Setup section, what file did you point it to?
                  > > > >
                  > > > >
                  > > > >
                  > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > > > > >Were do I find the wu txt file? the one thats generated is the log file and it cant be copyed and pasted
                  > > > > > >
                  > > > > > > In the setup, did you configure the station type WV32 to and set the file to monitor to the wu.txt file being generated?
                  > > > > > >
                  > > > > > > Please send me the wu.txt file in email to wuhu_software at yahoo.com.
                  > > > > > >
                  > > > > > >
                  > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                  > > > > > > >
                  > > > > > > >
                  > > > > > > >
                  > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > > > > > > >I'm using WV32 V 7.0 with WU Heavyweather uploader
                  > > > > > > > >
                  > > > > > > > > Ok for now, go to setup and un-check the enable uploads until we figure out what is going on.
                  > > > > > > > >
                  > > > > > > > > What kind of station is this? Are you using Heavyweather or some other application?
                  > > > > > > > >
                  > > > > > > > > The more details the better.
                  > > > > > > > >
                  > > > > > > > >
                  > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                  > > > > > > > > >
                  > > > > > > > > >
                  > > > > > > > > >
                  > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > > > > > > > > >Thats the bad part all my dials read zero
                  > > > > > > > > > >
                  > > > > > > > > > > If the data on your screen makes sense, do not worry about it.
                  > > > > > > > > > >
                  > > > > > > > > > > Awekas has their own data quality checking that sometimes raises false alarms and sends out emails.
                  > > > > > > > > > >
                  > > > > > > > > > >
                  > > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "davewierstad" <davewierstad@> wrote:
                  > > > > > > > > > > >
                  > > > > > > > > > > > I'm trying to setup Awekas software and it connects to WU ok,but it says my sensors values our out of range,were in the setup menu do I set the values like temperature,humidity etc
                  > > > > > > > > > > >
                  > > > > > > > > > >
                  > > > > > > > > >
                  > > > > > > > >
                  > > > > > > >
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                Your message has been successfully submitted and would be delivered to recipients shortly.