Loading ...
Sorry, an error occurred while loading the content.
 

Re: WUHU Redux - B112 for Beta Testers

Expand Messages
  • wuhu_software
    Jerry, Just in case, I added code to re-enable the rain sensor if it was disabled at the point where you are re-enabling all rainfall reporting. It may post a
    Message 1 of 36 , Sep 17, 2010
      Jerry,

      Just in case, I added code to re-enable the rain sensor if it was disabled at the point where you are re-enabling all rainfall reporting. It may post a message telling you to wait for another update from the console but at least it is not a black hole. Thanks for your observations.


      --- In wuhu_software_group@yahoogroups.com, "j1haaland" <cpr@...> wrote:
      >
      > No, it wasn't accidentally checked. I ran it three times to try and figure out what I was doing wrong and it did the same thing each time.
      >
      > 'Sigh' I just went and tried it again and it worked just fine. Go figure... I have no clue as to what was going on! Whatever the glitch was, it seems to have healed itself.
      >
      > Well, I experimented some more. The first time I tried it (yesterday), I checked the disable sensor. That of course didn't work, I went back in and realized what I had done, unchecked disable sensor and checked disable reporting and saved it. Then I got the message to wait until an update appeared, went back in to Tweak and found the sensor box checked instead of reporting. I unchecked sensor and rechecked reporting. That went on several times. Tonight, I just went in and checked disable reporting. I got no message about waiting for an update, but when I went back in disable reporting was still checked. I then duplicated what I did the night before and got the same results as then. Clear as mud? The bottom line is, I don't know if there's a glitch or not! Probably isn't a problem when you do it right the first time :)
      > Thanks for all your work on this project!
      > Jerry
      >
      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
      > >
      > >
      > > Hm, I have not seen or heard of this before.
      > >
      > > Are you sure that the disable rainfall sensor was accidentally checked but you had not noticed it?
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "j1haaland" <cpr@> wrote:
      > > >
      > > > That was the point of the post, I didn't disable the rainfall sensor, I checked the 'disable rainfall reporting'. Yet when I went back in to un-check it, it was no longer checked and the 'disable rainfall sensor' box was checked.
      > > > jh
      > > >
      >
    • wuhu_software
      Jerry, Just in case, I added code to re-enable the rain sensor if it was disabled at the point where you are re-enabling all rainfall reporting. It may post a
      Message 36 of 36 , Sep 17, 2010
        Jerry,

        Just in case, I added code to re-enable the rain sensor if it was disabled at the point where you are re-enabling all rainfall reporting. It may post a message telling you to wait for another update from the console but at least it is not a black hole. Thanks for your observations.


        --- In wuhu_software_group@yahoogroups.com, "j1haaland" <cpr@...> wrote:
        >
        > No, it wasn't accidentally checked. I ran it three times to try and figure out what I was doing wrong and it did the same thing each time.
        >
        > 'Sigh' I just went and tried it again and it worked just fine. Go figure... I have no clue as to what was going on! Whatever the glitch was, it seems to have healed itself.
        >
        > Well, I experimented some more. The first time I tried it (yesterday), I checked the disable sensor. That of course didn't work, I went back in and realized what I had done, unchecked disable sensor and checked disable reporting and saved it. Then I got the message to wait until an update appeared, went back in to Tweak and found the sensor box checked instead of reporting. I unchecked sensor and rechecked reporting. That went on several times. Tonight, I just went in and checked disable reporting. I got no message about waiting for an update, but when I went back in disable reporting was still checked. I then duplicated what I did the night before and got the same results as then. Clear as mud? The bottom line is, I don't know if there's a glitch or not! Probably isn't a problem when you do it right the first time :)
        > Thanks for all your work on this project!
        > Jerry
        >
        > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
        > >
        > >
        > > Hm, I have not seen or heard of this before.
        > >
        > > Are you sure that the disable rainfall sensor was accidentally checked but you had not noticed it?
        > >
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "j1haaland" <cpr@> wrote:
        > > >
        > > > That was the point of the post, I didn't disable the rainfall sensor, I checked the 'disable rainfall reporting'. Yet when I went back in to un-check it, it was no longer checked and the 'disable rainfall sensor' box was checked.
        > > > jh
        > > >
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.