Loading ...
Sorry, an error occurred while loading the content.

Re: wind and gust readings

Expand Messages
  • axelvold
    i have sent you a picture. //Lars
    Message 1 of 14 , Oct 13, 2009
    • 0 Attachment
      i have sent you a picture.

      //Lars

      --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
      >
      >
      > Take a screen capture of the tweak screen then send to me:
      >
      > wuhu_software at yahoo.com
      >
      > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
      > >
      > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
      > >
      > > //Lars
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
      > > >
      > > >
      > > > Also, the values should be comma separated. Example:
      > > >
      > > > 57.0, 75.0, 114.1
      > > >
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
      > > > >
      > > > > Is the box checked next to where you put in the values to ignore?
      > > > >
      > > > > steve
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
      > > > > >
      > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
      > > > > >
      > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
      > > > > >
      > > > > > What should i do to correct this?
      > > > > >
      > > > >
      > > >
      > >
      >
    • axelvold
      Any sugestion to solve this problem? //Lars
      Message 2 of 14 , Oct 14, 2009
      • 0 Attachment
        Any sugestion to solve this problem?

        //Lars

        --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@...> wrote:
        >
        > i have sent you a picture.
        >
        > //Lars
        >
        > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
        > >
        > >
        > > Take a screen capture of the tweak screen then send to me:
        > >
        > > wuhu_software at yahoo.com
        > >
        > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
        > > >
        > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
        > > >
        > > > //Lars
        > > >
        > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
        > > > >
        > > > >
        > > > > Also, the values should be comma separated. Example:
        > > > >
        > > > > 57.0, 75.0, 114.1
        > > > >
        > > > >
        > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
        > > > > >
        > > > > > Is the box checked next to where you put in the values to ignore?
        > > > > >
        > > > > > steve
        > > > > >
        > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
        > > > > > >
        > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
        > > > > > >
        > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
        > > > > > >
        > > > > > > What should i do to correct this?
        > > > > > >
        > > > > >
        > > > >
        > > >
        > >
        >
      • wuhu_software
        Can you point to a history page on WU where a bad wind reading was uploaded? I looked over the code, everything looks ok. You are using direct serial correct?
        Message 3 of 14 , Oct 14, 2009
        • 0 Attachment
          Can you point to a history page on WU where a bad wind reading was uploaded?

          I looked over the code, everything looks ok.

          You are using direct serial correct?


          --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@...> wrote:
          >
          > Any sugestion to solve this problem?
          >
          > //Lars
          >
          > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
          > >
          > > i have sent you a picture.
          > >
          > > //Lars
          > >
          > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
          > > >
          > > >
          > > > Take a screen capture of the tweak screen then send to me:
          > > >
          > > > wuhu_software at yahoo.com
          > > >
          > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
          > > > >
          > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
          > > > >
          > > > > //Lars
          > > > >
          > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
          > > > > >
          > > > > >
          > > > > > Also, the values should be comma separated. Example:
          > > > > >
          > > > > > 57.0, 75.0, 114.1
          > > > > >
          > > > > >
          > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
          > > > > > >
          > > > > > > Is the box checked next to where you put in the values to ignore?
          > > > > > >
          > > > > > > steve
          > > > > > >
          > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
          > > > > > > >
          > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
          > > > > > > >
          > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
          > > > > > > >
          > > > > > > > What should i do to correct this?
          > > > > > > >
          > > > > > >
          > > > > >
          > > > >
          > > >
          > >
          >
        • axelvold
          Check this page, there are several values over the limit that i did set in the tweak screen
          Message 4 of 14 , Oct 15, 2009
          • 0 Attachment
            Check this page, there are several values over the limit that i did set in the tweak screen

            http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=ISKNEAXE2&day=15&year=2009&month=10&graphspan=month

            //Lars

            --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
            >
            >
            > Can you point to a history page on WU where a bad wind reading was uploaded?
            >
            > I looked over the code, everything looks ok.
            >
            > You are using direct serial correct?
            >
            >
            > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
            > >
            > > Any sugestion to solve this problem?
            > >
            > > //Lars
            > >
            > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
            > > >
            > > > i have sent you a picture.
            > > >
            > > > //Lars
            > > >
            > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > > > >
            > > > >
            > > > > Take a screen capture of the tweak screen then send to me:
            > > > >
            > > > > wuhu_software at yahoo.com
            > > > >
            > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
            > > > > >
            > > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
            > > > > >
            > > > > > //Lars
            > > > > >
            > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
            > > > > > >
            > > > > > >
            > > > > > > Also, the values should be comma separated. Example:
            > > > > > >
            > > > > > > 57.0, 75.0, 114.1
            > > > > > >
            > > > > > >
            > > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
            > > > > > > >
            > > > > > > > Is the box checked next to where you put in the values to ignore?
            > > > > > > >
            > > > > > > > steve
            > > > > > > >
            > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
            > > > > > > > >
            > > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
            > > > > > > > >
            > > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
            > > > > > > > >
            > > > > > > > > What should i do to correct this?
            > > > > > > > >
            > > > > > > >
            > > > > > >
            > > > > >
            > > > >
            > > >
            > >
            >
          • KNHBRIST1
            Just a quick observation, you stated over the values The values that you put in the tweaks section are specific values, it will disregard only th especific
            Message 5 of 14 , Oct 15, 2009
            • 0 Attachment
              Just a quick observation, you stated " over the values" The values that you put in the tweaks section are specific values, it will disregard only th especific values that you put in ther.
              Steve

              --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@...> wrote:
              >
              >
              >
              > Check this page, there are several values over the limit that i did set in the tweak screen
              >
              > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=ISKNEAXE2&day=15&year=2009&month=10&graphspan=month
              >
              > //Lars
              >
              > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > >
              > >
              > > Can you point to a history page on WU where a bad wind reading was uploaded?
              > >
              > > I looked over the code, everything looks ok.
              > >
              > > You are using direct serial correct?
              > >
              > >
              > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
              > > >
              > > > Any sugestion to solve this problem?
              > > >
              > > > //Lars
              > > >
              > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
              > > > >
              > > > > i have sent you a picture.
              > > > >
              > > > > //Lars
              > > > >
              > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > > > >
              > > > > >
              > > > > > Take a screen capture of the tweak screen then send to me:
              > > > > >
              > > > > > wuhu_software at yahoo.com
              > > > > >
              > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
              > > > > > >
              > > > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
              > > > > > >
              > > > > > > //Lars
              > > > > > >
              > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
              > > > > > > >
              > > > > > > >
              > > > > > > > Also, the values should be comma separated. Example:
              > > > > > > >
              > > > > > > > 57.0, 75.0, 114.1
              > > > > > > >
              > > > > > > >
              > > > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
              > > > > > > > >
              > > > > > > > > Is the box checked next to where you put in the values to ignore?
              > > > > > > > >
              > > > > > > > > steve
              > > > > > > > >
              > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
              > > > > > > > > >
              > > > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
              > > > > > > > > >
              > > > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
              > > > > > > > > >
              > > > > > > > > > What should i do to correct this?
              > > > > > > > > >
              > > > > > > > >
              > > > > > > >
              > > > > > >
              > > > > >
              > > > >
              > > >
              > >
              >
            • axelvold
              In the tweak screen i have checked the box reject all wind speeds above 100 mph, but it semms not to work, or? //Lars
              Message 6 of 14 , Oct 15, 2009
              • 0 Attachment
                In the tweak screen i have checked the box reject all wind speeds above 100 mph, but it semms not to work, or?

                //Lars

                --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@...> wrote:
                >
                > Just a quick observation, you stated " over the values" The values that you put in the tweaks section are specific values, it will disregard only th especific values that you put in ther.
                > Steve
                >
                > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                > >
                > >
                > >
                > > Check this page, there are several values over the limit that i did set in the tweak screen
                > >
                > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=ISKNEAXE2&day=15&year=2009&month=10&graphspan=month
                > >
                > > //Lars
                > >
                > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > >
                > > >
                > > > Can you point to a history page on WU where a bad wind reading was uploaded?
                > > >
                > > > I looked over the code, everything looks ok.
                > > >
                > > > You are using direct serial correct?
                > > >
                > > >
                > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                > > > >
                > > > > Any sugestion to solve this problem?
                > > > >
                > > > > //Lars
                > > > >
                > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                > > > > >
                > > > > > i have sent you a picture.
                > > > > >
                > > > > > //Lars
                > > > > >
                > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > > > > >
                > > > > > >
                > > > > > > Take a screen capture of the tweak screen then send to me:
                > > > > > >
                > > > > > > wuhu_software at yahoo.com
                > > > > > >
                > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                > > > > > > >
                > > > > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
                > > > > > > >
                > > > > > > > //Lars
                > > > > > > >
                > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                > > > > > > > >
                > > > > > > > >
                > > > > > > > > Also, the values should be comma separated. Example:
                > > > > > > > >
                > > > > > > > > 57.0, 75.0, 114.1
                > > > > > > > >
                > > > > > > > >
                > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
                > > > > > > > > >
                > > > > > > > > > Is the box checked next to where you put in the values to ignore?
                > > > > > > > > >
                > > > > > > > > > steve
                > > > > > > > > >
                > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                > > > > > > > > > >
                > > > > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
                > > > > > > > > > >
                > > > > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
                > > > > > > > > > >
                > > > > > > > > > > What should i do to correct this?
                > > > > > > > > > >
                > > > > > > > > >
                > > > > > > > >
                > > > > > > >
                > > > > > >
                > > > > >
                > > > >
                > > >
                > >
                >
              • wuhu_software
                I am not seeing the high wind readings in the tabular data, did you delete them?
                Message 7 of 14 , Oct 16, 2009
                • 0 Attachment
                  I am not seeing the high wind readings in the tabular data, did you delete them?


                  --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@...> wrote:
                  >
                  > Just a quick observation, you stated " over the values" The values that you put in the tweaks section are specific values, it will disregard only th especific values that you put in ther.
                  > Steve
                  >
                  > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                  > >
                  > >
                  > >
                  > > Check this page, there are several values over the limit that i did set in the tweak screen
                  > >
                  > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=ISKNEAXE2&day=15&year=2009&month=10&graphspan=month
                  > >
                  > > //Lars
                  > >
                  > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > >
                  > > >
                  > > > Can you point to a history page on WU where a bad wind reading was uploaded?
                  > > >
                  > > > I looked over the code, everything looks ok.
                  > > >
                  > > > You are using direct serial correct?
                  > > >
                  > > >
                  > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                  > > > >
                  > > > > Any sugestion to solve this problem?
                  > > > >
                  > > > > //Lars
                  > > > >
                  > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                  > > > > >
                  > > > > > i have sent you a picture.
                  > > > > >
                  > > > > > //Lars
                  > > > > >
                  > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > > > > >
                  > > > > > >
                  > > > > > > Take a screen capture of the tweak screen then send to me:
                  > > > > > >
                  > > > > > > wuhu_software at yahoo.com
                  > > > > > >
                  > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                  > > > > > > >
                  > > > > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
                  > > > > > > >
                  > > > > > > > //Lars
                  > > > > > > >
                  > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                  > > > > > > > >
                  > > > > > > > >
                  > > > > > > > > Also, the values should be comma separated. Example:
                  > > > > > > > >
                  > > > > > > > > 57.0, 75.0, 114.1
                  > > > > > > > >
                  > > > > > > > >
                  > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
                  > > > > > > > > >
                  > > > > > > > > > Is the box checked next to where you put in the values to ignore?
                  > > > > > > > > >
                  > > > > > > > > > steve
                  > > > > > > > > >
                  > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                  > > > > > > > > > >
                  > > > > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
                  > > > > > > > > > >
                  > > > > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
                  > > > > > > > > > >
                  > > > > > > > > > > What should i do to correct this?
                  > > > > > > > > > >
                  > > > > > > > > >
                  > > > > > > > >
                  > > > > > > >
                  > > > > > >
                  > > > > >
                  > > > >
                  > > >
                  > >
                  >
                • axelvold
                  Chech the gust value //Lars
                  Message 8 of 14 , Oct 17, 2009
                  • 0 Attachment
                    Chech the gust value

                    //Lars

                    --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...> wrote:
                    >
                    >
                    > I am not seeing the high wind readings in the tabular data, did you delete them?
                    >
                    >
                    > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
                    > >
                    > > Just a quick observation, you stated " over the values" The values that you put in the tweaks section are specific values, it will disregard only th especific values that you put in ther.
                    > > Steve
                    > >
                    > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                    > > >
                    > > >
                    > > >
                    > > > Check this page, there are several values over the limit that i did set in the tweak screen
                    > > >
                    > > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=ISKNEAXE2&day=15&year=2009&month=10&graphspan=month
                    > > >
                    > > > //Lars
                    > > >
                    > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                    > > > >
                    > > > >
                    > > > > Can you point to a history page on WU where a bad wind reading was uploaded?
                    > > > >
                    > > > > I looked over the code, everything looks ok.
                    > > > >
                    > > > > You are using direct serial correct?
                    > > > >
                    > > > >
                    > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                    > > > > >
                    > > > > > Any sugestion to solve this problem?
                    > > > > >
                    > > > > > //Lars
                    > > > > >
                    > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                    > > > > > >
                    > > > > > > i have sent you a picture.
                    > > > > > >
                    > > > > > > //Lars
                    > > > > > >
                    > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                    > > > > > > >
                    > > > > > > >
                    > > > > > > > Take a screen capture of the tweak screen then send to me:
                    > > > > > > >
                    > > > > > > > wuhu_software at yahoo.com
                    > > > > > > >
                    > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                    > > > > > > > >
                    > > > > > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
                    > > > > > > > >
                    > > > > > > > > //Lars
                    > > > > > > > >
                    > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                    > > > > > > > > >
                    > > > > > > > > >
                    > > > > > > > > > Also, the values should be comma separated. Example:
                    > > > > > > > > >
                    > > > > > > > > > 57.0, 75.0, 114.1
                    > > > > > > > > >
                    > > > > > > > > >
                    > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
                    > > > > > > > > > >
                    > > > > > > > > > > Is the box checked next to where you put in the values to ignore?
                    > > > > > > > > > >
                    > > > > > > > > > > steve
                    > > > > > > > > > >
                    > > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                    > > > > > > > > > > >
                    > > > > > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
                    > > > > > > > > > > >
                    > > > > > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
                    > > > > > > > > > > >
                    > > > > > > > > > > > What should i do to correct this?
                    > > > > > > > > > > >
                    > > > > > > > > > >
                    > > > > > > > > >
                    > > > > > > > >
                    > > > > > > >
                    > > > > > >
                    > > > > >
                    > > > >
                    > > >
                    > >
                    >
                  • wuhu_software
                    Ok, I see it now. Do you have 85.7 entered as a rejected speed under tweaks?
                    Message 9 of 14 , Oct 17, 2009
                    • 0 Attachment
                      Ok, I see it now. Do you have 85.7 entered as a rejected speed under tweaks?


                      --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@...> wrote:
                      >
                      > Chech the gust value
                      >
                      > //Lars
                      >
                      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                      > >
                      > >
                      > > I am not seeing the high wind readings in the tabular data, did you delete them?
                      > >
                      > >
                      > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
                      > > >
                      > > > Just a quick observation, you stated " over the values" The values that you put in the tweaks section are specific values, it will disregard only th especific values that you put in ther.
                      > > > Steve
                      > > >
                      > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                      > > > >
                      > > > >
                      > > > >
                      > > > > Check this page, there are several values over the limit that i did set in the tweak screen
                      > > > >
                      > > > > http://www.wunderground.com/weatherstation/WXDailyHistory.asp?ID=ISKNEAXE2&day=15&year=2009&month=10&graphspan=month
                      > > > >
                      > > > > //Lars
                      > > > >
                      > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                      > > > > >
                      > > > > >
                      > > > > > Can you point to a history page on WU where a bad wind reading was uploaded?
                      > > > > >
                      > > > > > I looked over the code, everything looks ok.
                      > > > > >
                      > > > > > You are using direct serial correct?
                      > > > > >
                      > > > > >
                      > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                      > > > > > >
                      > > > > > > Any sugestion to solve this problem?
                      > > > > > >
                      > > > > > > //Lars
                      > > > > > >
                      > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                      > > > > > > >
                      > > > > > > > i have sent you a picture.
                      > > > > > > >
                      > > > > > > > //Lars
                      > > > > > > >
                      > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > > Take a screen capture of the tweak screen then send to me:
                      > > > > > > > >
                      > > > > > > > > wuhu_software at yahoo.com
                      > > > > > > > >
                      > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                      > > > > > > > > >
                      > > > > > > > > > Yes i have checked the box and the values is comma seperated but still it's just 114.1 and 57.0 thats ignoredall other values is sent.
                      > > > > > > > > >
                      > > > > > > > > > //Lars
                      > > > > > > > > >
                      > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@> wrote:
                      > > > > > > > > > >
                      > > > > > > > > > >
                      > > > > > > > > > > Also, the values should be comma separated. Example:
                      > > > > > > > > > >
                      > > > > > > > > > > 57.0, 75.0, 114.1
                      > > > > > > > > > >
                      > > > > > > > > > >
                      > > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@> wrote:
                      > > > > > > > > > > >
                      > > > > > > > > > > > Is the box checked next to where you put in the values to ignore?
                      > > > > > > > > > > >
                      > > > > > > > > > > > steve
                      > > > > > > > > > > >
                      > > > > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "axelvold" <axelvold@> wrote:
                      > > > > > > > > > > > >
                      > > > > > > > > > > > > I have entered several wind and gust values as bad readings in the tweak data but WUHU does not filter them out.
                      > > > > > > > > > > > >
                      > > > > > > > > > > > > So those bad values goes in to both VWS and WD and they are also sent to WU PWS CWOP and other sites that i send data to.
                      > > > > > > > > > > > >
                      > > > > > > > > > > > > What should i do to correct this?
                      > > > > > > > > > > > >
                      > > > > > > > > > > >
                      > > > > > > > > > >
                      > > > > > > > > >
                      > > > > > > > >
                      > > > > > > >
                      > > > > > >
                      > > > > >
                      > > > >
                      > > >
                      > >
                      >
                    Your message has been successfully submitted and would be delivered to recipients shortly.