Re: Frequency of WUHU updates
- Steve, that did it for me! Just took the Prolific adapter off the hub I was using and am 6/6 in updates. Thanks a ton!
--- In firstname.lastname@example.org, "steve_03222" <steve_03222@...> wrote:
> I have been using the IO gear for a few years with no issues. Trying to think back, at one time I had an issue with a USB Hub that I had it plugged into. I switched and run it direct into a port on the computer and no issues.
> --- In email@example.com, "alrjr2001" <alrjr2001@> wrote:
> > Speaking of the IOGear adapter, does anyone else have an issue with the drivers on that particular unit (GUC232A)? It seems everytime I re-start my PC (running XP) say for a software update or the rare freeze, etc. I have to re-install the driver for the adapter before WUHU will communicate with it.
> > Thanks In Advance!
> > Arnold In The Smokies
> > DW1121
> > --- In firstname.lastname@example.org, "steve_03222" <steve_03222@> wrote:
> > >
> > > If you are using a USB to serial adapter, not all work very well. I and many others have had good luck with the IO Gear adapter. I forget the model at the moment, but a quick search will probably find it for you.
> > > Steve
> > >
> > > --- In email@example.com, "robsteck1" <robsteck1@> wrote:
> > > >
> > > > I have a La Crosse WS-2315 that's set up to recieve wireless data from the Thermo-Hygro sensor and is connected via a USB/Serial cable to my computer. WUHU is only getting updates from the base station about 16% of the time (currently showing 82/503). Is anyone else having an issue like this and what can I do to increase the updates WUHU gets? I just changed the batteries in the sensor, btw.
> > > >
> > >