I have added several new actions/alerts that are as follows:
1) On Update - Fires whenever new data is received from the console
using direct serial or currdat.lst mode (or any other mode). This can
be used to transfer the current weather data to another application
The Alert and Action are fired one time upon update.
The Alert tone is not played when this alarm is fired.
You can limit the firing of this alarm by selecting the check
box "Use Minimum Update". If that box is checked, this Alarm will
only fire after the minimum update interval has expired (when it
uploads to CWOP and AWEKAS).
2) Console update failure - After 10 minutes have elapsed, and no
updates have been received by the console either by direct serial or
currdat.lst, this alarm will fire. This is used to detect a console
communication failure of one sort or another (Heavyweather Gray-outs,
loose cables using direct).
This Alarm will continue to fire every 10 minute interval that
elapses without and update.
3) Console Data Rejected - If bad data is received from the console
or if the variables are out of range this alarm will fire.
4) Console data corrected - If a weather variable is within the valid
range, but has sharply drifted away from the average for whatever
reason WUHU will replace the data with the average reading and
continue. This alarm fires when that happens.
5) WU Upload Failure
6) CWOP Upload Failure
7) AWEKAS Upload Failure
If any upload errors occur, these alarms will fire.
Feel free to upload your short .wav files within a .zip file to the
files upload area. Try to keep the individual files fairly small (<
I have uploaded a zip containing various sound effects and snippets
from popular movies.