Loading ...
Sorry, an error occurred while loading the content.

Re: [wuhu_software_group] Corrupt data detected

Expand Messages
  • Jaye Ellen
    Hi --- It s been my experience that this sort of thing can happen if the Console Clock and Computer Clock are more than a minute or so different... quirk of
    Message 1 of 15 , May 1, 2008
    • 0 Attachment
      Hi ---
       
      It's been my experience that this sort of thing can happen if the Console Clock and Computer Clock are more than a minute or so different... quirk of the systems?
       
      Jaye Ellen

      On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn <jrvaughn@...> wrote:

      I have a WS-2308 and I get the same message but I have just been ignoring it.

       

      Joe

       

      -----Original Message-----
      From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of M. A.P
      Sent: Thursday, May 01, 2008 8:57 AM
      To: wuhu_software_group@yahoogroups.com
      Subject: RE: [wuhu_software_group] Corrupt data detected

       


      I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is trying, at this time to obtain WWVB radio controlled time - It always appears at around the same time but not every day.
       
      I don't see any curruption of the data.
       
       
      Thu May 01 01:06:06 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:15 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:24 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:33 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:41 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:50 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:59 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:59 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
      Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
      Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully, attempting to resume communications.
      Thu May 01 01:07:13 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:22 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:31 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:40 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:49 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:58 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:07 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:07 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
      Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
      Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully, attempting to resume communications.
      Thu May 01 01:08:20 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:29 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:38 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:47 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:56 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:05 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:14 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:14 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
      Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
      Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to resume communications.
      Thu May 01 01:09:28 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:37 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:46 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:54 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.




      Back to work after baby– how do you know when you're ready?




      --
      Jaye Ellen
    • Joseph R Vaughn
      Both have the same time. Joe ... From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of Jaye Ellen Sent: Thursday,
      Message 2 of 15 , May 1, 2008
      • 0 Attachment

        Both have the same time.

         

        Joe

         

        -----Original Message-----
        From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of Jaye Ellen
        Sent: Thursday, May 01, 2008 9:27 AM
        To: wuhu_software_group@yahoogroups.com
        Subject: Re: [wuhu_software_group] Corrupt data detected

         

        Hi ---

         

        It's been my experience that this sort of thing can happen if the Console Clock and Computer Clock are more than a minute or so different... quirk of the systems?

         

        Jaye Ellen

        On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn <jrvaughn@vaughnent. com> wrote:

        I have a WS-2308 and I get the same message but I have just been ignoring it.

         

        Joe

         

        -----Original Message-----
        From: wuhu_software_ group@yahoogroup s.com [mailto:wuhu_software_ group@yahoogroup s.com] On Behalf Of M. A.P
        Sent: Thursday, May 01, 2008 8:57 AM
        To: wuhu_software_ group@yahoogroup s.com
        Subject: RE: [wuhu_software_ group] Corrupt data detected

         


        I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is trying, at this time to obtain WWVB radio controlled time - It always appears at around the same time but not every day.
         
        I don't see any curruption of the data.
         
         
        Thu May 01 01:06:06 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:15 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:24 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:33 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:41 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:50 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:59 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:59 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
        Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
        Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully, attempting to resume communications.
        Thu May 01 01:07:13 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:22 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:31 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:40 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:49 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:58 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:07 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:07 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
        Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
        Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully, attempting to resume communications.
        Thu May 01 01:08:20 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:29 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:38 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:47 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:56 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:05 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:14 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:14 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
        Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
        Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to resume communications.
        Thu May 01 01:09:28 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:37 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:46 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:54 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.



        Back to work after baby– how do you know when you're ready?




        --
        Jaye Ellen

      • steve_03222
        Joe, Another possibility if the times all match is that the setting for daylight savings time is off. There is a setting for EDT on or off in the setup. I
        Message 3 of 15 , May 1, 2008
        • 0 Attachment
          Joe,
          Another possibility if the times all match is that the setting for
          daylight savings time is off. There is a setting for EDT on or off
          in the setup. I don't get the signal and manually set my console.
          One time I just changed the time by 1 hour and all seemed fine
          except for what you mentioned. I found the EDT on or off and use
          that now to change the hour ahead or behind. I am not home right
          now, but as I write it is probably listed as DST on or off.
          Steve



          --- In wuhu_software_group@yahoogroups.com, "Joseph R Vaughn"
          <jrvaughn@...> wrote:
          >
          > Both have the same time.
          >
          >
          >
          > Joe
          >
          >
          >
          > -----Original Message-----
          > From: wuhu_software_group@yahoogroups.com
          > [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of Jaye
          Ellen
          > Sent: Thursday, May 01, 2008 9:27 AM
          > To: wuhu_software_group@yahoogroups.com
          > Subject: Re: [wuhu_software_group] Corrupt data detected
          >
          >
          >
          > Hi ---
          >
          >
          >
          > It's been my experience that this sort of thing can happen if the
          Console
          > Clock and Computer Clock are more than a minute or so different...
          quirk of
          > the systems?
          >
          >
          >
          > Jaye Ellen
          >
          > On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn
          <jrvaughn@vaughnent.
          > <mailto:jrvaughn@...> com> wrote:
          >
          > I have a WS-2308 and I get the same message but I have just been
          ignoring
          > it.
          >
          >
          >
          > Joe
          >
          >
          >
          > -----Original Message-----
          > From: wuhu_software_ <mailto:wuhu_software_group@yahoogroups.com>
          > group@yahoogroups.com [mailto:wuhu_software_
          > <mailto:wuhu_software_group@yahoogroups.com>
          group@yahoogroups.com] On
          > Behalf Of M. A.P
          > Sent: Thursday, May 01, 2008 8:57 AM
          > To: wuhu_software_ <mailto:wuhu_software_group@yahoogroups.com>
          > group@yahoogroups.com
          > Subject: RE: [wuhu_software_group] Corrupt data detected
          >
          >
          >
          >
          > I have a WS2316 (/w direct serial access) that regularly gets the
          following
          > error messages. Should I assume that the WS2316 is not responding
          to WUHU as
          > it is trying, at this time to obtain WWVB radio controlled time -
          It always
          > appears at around the same time but not every day.
          >
          > I don't see any curruption of the data.
          >
          >
          > Thu May 01 01:06:06 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:15 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:24 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:33 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:41 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:50 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:59 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:06:59 2008 > Detected consecutive communications
          failures.
          > Attempting to recover by re-opening the port.
          > Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
          > Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully,
          attempting to
          > resume communications.
          > Thu May 01 01:07:13 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:07:22 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:07:31 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:07:40 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:07:49 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:07:58 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:08:07 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:08:07 2008 > Detected consecutive communications
          failures.
          > Attempting to recover by re-opening the port.
          > Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
          > Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully,
          attempting to
          > resume communications.
          > Thu May 01 01:08:20 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:08:29 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:08:38 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:08:47 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:08:56 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:09:05 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:09:14 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:09:14 2008 > Detected consecutive communications
          failures.
          > Attempting to recover by re-opening the port.
          > Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
          > Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully,
          attempting to
          > resume communications.
          > Thu May 01 01:09:28 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:09:37 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:09:46 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          > Thu May 01 01:09:54 2008 > Failed to retrieve weather data from
          console.
          > Possible invalid/corrupt data detected.
          >
          >
          >
          > _____
          >
          > Back to work after baby- how do you know when you're ready?
          > <http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-
          documentid=57
          > 97498&ocid=T067MSN40A0701A>
          >
          >
          >
          >
          > --
          > Jaye Ellen
          >
        • Joseph R Vaughn
          I get the time signal from Colorado and Bill Gates has set my CPU on daylight savings. I don t think that the issue. Joe ... From:
          Message 4 of 15 , May 1, 2008
          • 0 Attachment

            I get the time signal from Colorado and Bill Gates has set my CPU on daylight savings. I don’t think that the issue.

             

            Joe

             

            -----Original Message-----
            From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of steve_03222
            Sent: Thursday, May 01, 2008 1:40 PM
            To: wuhu_software_group@yahoogroups.com
            Subject: [wuhu_software_group] Re: Corrupt data detected

             

            Joe,
            Another possibility if the times all match is that the setting for
            daylight savings time is off. There is a setting for EDT on or off
            in the setup. I don't get the signal and manually set my console.
            One time I just changed the time by 1 hour and all seemed fine
            except for what you mentioned. I found the EDT on or off and use
            that now to change the hour ahead or behind. I am not home right
            now, but as I write it is probably listed as DST on or off.
            Steve

            --- In wuhu_software_ group@yahoogroup s.com, "Joseph R Vaughn"
            <jrvaughn@.. .> wrote:

            >
            > Both have the same time.
            >
            >
            >
            > Joe
            >
            >
            >
            > -----Original Message-----
            > From: wuhu_software_ group@yahoogroup s.com
            > [mailto:wuhu_software_ group@yahoogroup s.com]
            On Behalf Of Jaye
            Ellen
            > Sent: Thursday, May 01, 2008 9:27 AM
            > To: wuhu_software_ group@yahoogroup s.com
            > Subject: Re: [wuhu_software_ group] Corrupt data detected
            >
            >
            >
            > Hi ---
            >
            >
            >
            > It's been my experience that this sort of thing can happen if the
            Console
            > Clock and Computer Clock are more than a minute or so different...
            quirk of
            > the systems?
            >
            >
            >
            > Jaye Ellen
            >
            > On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn
            <jrvaughn@vaughnent .
            > <mailto:jrvaughn@ ...> com> wrote:
            >
            > I have a WS-2308 and I get the same message but I have just been
            ignoring
            > it.
            >
            >
            >
            > Joe
            >
            >
            >
            > -----Original Message-----
            > From: wuhu_software_ <mailto:
            href="mailto:wuhu_software_group%40yahoogroups.com">wuhu_software_ group@yahoogroup s.com>
            > group@yahoogroups. com
            [mailto:wuhu_ software_
            > <mailto:wuhu_software_ group@yahoogroup s.com>
            group@yahoogroups. com] On
            > Behalf Of M. A.P
            > Sent: Thursday, May 01, 2008 8:57 AM
            > To: wuhu_software_ <mailto:
            href="mailto:wuhu_software_group%40yahoogroups.com">wuhu_software_ group@yahoogroup s.com>
            > group@yahoogroups. com
            > Subject: RE: [wuhu_software_ group] Corrupt data detected
            >
            >
            >
            >
            > I have a WS2316 (/w direct serial access) that regularly gets the
            following
            > error messages. Should I assume that the WS2316 is not responding
            to WUHU as
            > it is trying, at this time to obtain WWVB radio controlled time -
            It always
            > appears at around the same time but not every day.
            >
            > I don't see any curruption of the data.
            >
            >
            > Thu May 01 01:06:06 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:15 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:24 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:33 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:41 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:50 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:59 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:06:59 2008 > Detected consecutive communications
            failures.
            > Attempting to recover by re-opening the port.
            > Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
            > Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully,
            attempting to
            > resume communications.
            > Thu May 01 01:07:13 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:07:22 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:07:31 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:07:40 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:07:49 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:07:58 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:08:07 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:08:07 2008 > Detected consecutive communications
            failures.
            > Attempting to recover by re-opening the port.
            > Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
            > Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully,
            attempting to
            > resume communications.
            > Thu May 01 01:08:20 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:08:29 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:08:38 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:08:47 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:08:56 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:09:05 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:09:14 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:09:14 2008 > Detected consecutive communications
            failures.
            > Attempting to recover by re-opening the port.
            > Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
            > Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully,
            attempting to
            > resume communications.
            > Thu May 01 01:09:28 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:09:37 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:09:46 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            > Thu May 01 01:09:54 2008 > Failed to retrieve weather data from
            console.
            > Possible invalid/corrupt data detected.
            >
            >
            >
            > _____
            >
            > Back to work after baby- how do you know when you're ready?
            > <
            href="http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-">http://lifestyle. msn.com/familyan dparenting/ articleNW. aspx?cp-
            documentid=57
            > 97498&ocid=T067MSN4 0A0701A>
            >
            >
            >
            >
            > --
            > Jaye Ellen
            >

          • Rick
            Thats your atomic clock trying to update I believe. If your Clock and the console are off my more than 30 secs you will get those errors. RICK KOHWAPAK1
            Message 5 of 15 , May 1, 2008
            • 0 Attachment
              Thats your atomic clock trying to update I believe. If your Clock and
              the console are off my more than 30 secs you will get those errors.

              RICK
              KOHWAPAK1

              http://www.wapakweather.com/


              --- In wuhu_software_group@yahoogroups.com, "M. A.P" <m_a_p@...> wrote:
              >
              >
              > I have a WS2316 (/w direct serial access) that regularly gets the
              following error messages. Should I assume that the WS2316 is not
              responding to WUHU as it is trying, at this time to obtain WWVB radio
              controlled time - It always appears at around the same time but not
              every day.
              >
              > I don't see any curruption of the data.
              >
              >
              > Thu May 01 01:06:06 2008 > Failed to retrieve weather data from
              console. Possible invalid/corrupt data detected.Thu May 01 01:06:15
              2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:06:24 2008 > Failed to
              retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:06:33 2008 > Failed to retrieve weather data
              from console. Possible invalid/corrupt data detected.Thu May 01
              01:06:41 2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:06:50 2008 > Failed to
              retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:06:59 2008 > Failed to retrieve weather data
              from console. Possible invalid/corrupt data detected.Thu May 01
              01:06:59 2008 > Detected consecutive communications failures.
              Attempting to recover by re-opening the port.Thu May 01 01:07:09 2008
              > Attempting to re-open port COM2.Thu May 01 01:07:09 2008 > Port COM2
              re-opened successfully, attempting to resume communications.Thu May 01
              01:07:13 2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:07:22 2008 > Failed to
              retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:07:31 2008 > Failed to retrieve weather data
              from console. Possible invalid/corrupt data detected.Thu May 01
              01:07:40 2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:07:49 2008 > Failed to
              retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:07:58 2008 > Failed to retrieve weather data
              from console. Possible invalid/corrupt data detected.Thu May 01
              01:08:07 2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:08:07 2008 > Detected
              consecutive communications failures. Attempting to recover by
              re-opening the port.Thu May 01 01:08:17 2008 > Attempting to re-open
              port COM2.Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully,
              attempting to resume communications.Thu May 01 01:08:20 2008 > Failed
              to retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:08:29 2008 > Failed to retrieve weather data
              from console. Possible invalid/corrupt data detected.Thu May 01
              01:08:38 2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:08:47 2008 > Failed to
              retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:08:56 2008 > Failed to retrieve weather data
              from console. Possible invalid/corrupt data detected.Thu May 01
              01:09:05 2008 > Failed to retrieve weather data from console. Possible
              invalid/corrupt data detected.Thu May 01 01:09:14 2008 > Failed to
              retrieve weather data from console. Possible invalid/corrupt data
              detected.Thu May 01 01:09:14 2008 > Detected consecutive
              communications failures. Attempting to recover by re-opening the
              port.Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.Thu
              May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to
              resume communications.Thu May 01 01:09:28 2008 > Failed to retrieve
              weather data from console. Possible invalid/corrupt data detected.Thu
              May 01 01:09:37 2008 > Failed to retrieve weather data from console.
              Possible invalid/corrupt data detected.Thu May 01 01:09:46 2008 >
              Failed to retrieve weather data from console. Possible invalid/corrupt
              data detected.Thu May 01 01:09:54 2008 > Failed to retrieve weather
              data from console. Possible invalid/corrupt data detected.
              > _________________________________________________________________
              > Back to work after baby–how do you know when you're ready?
              >
              http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-documentid=5797498&ocid=T067MSN40A0701A
              >
            • jdonovanwv5
              The ID on the tygon tubing is about 5/16 , just a hair over the 1/4 on the LaCrosse cover -- also the same length. I have the tubing set down low enough
              Message 6 of 15 , May 1, 2008
              • 0 Attachment
                The ID on the tygon tubing is about 5/16", just a hair over the 1/4"
                on the LaCrosse cover -- also the same length. I have the tubing set
                down low enough (just about 2 mm over the pivot crest) that I believe
                not, the shield on the board is a good 3/4" higher, but will check
                after a good intense rain for inside moisture. Of course it carries
                twice the flow of water in an equivalent storm compared to the
                original. Splashing would not only endanger the board (shorting
                across the power lead) but also lose water, so I'll keep an eye on
                comparison to nearby stations. We had a couple of inches both this
                week and last, and so far, it looks to be consistent. I also have a
                calibration bottle that leaks out slowly, and it checks. But for
                splashing, it is how it handles intense rain that counts.

                I am not sure I have enough drain holes in the base, but I'll see
                what it looks like in there and if needed can pop more drain
                holes.....The bottom of the can is not a watertight fit either no
                hopefully it will stay dry in there.

                Just out of curiosity, do you know of anyone who sells reeds switches
                of this type?

                Joe


                --- In wuhu_software_group@yahoogroups.com,
                "wuhu_software" <wuhu_software@...> wrote:
                >
                >
                > Joe,
                >
                > Nice job on the bucket.
                >
                > I did have one question, at the end of the funnel, is the water
                > stream isolated so it does not spray water on to the circuit board?
                >
                > Thanks for sharing.
                >
                >
                >
              • Rich Brunnworth
                DigiKey sells all kinds of reed switches. Rich ... -- Rich
                Message 7 of 15 , May 1, 2008
                • 0 Attachment
                  DigiKey sells all kinds of reed switches.

                  Rich

                  jdonovanwv5 wrote:
                  >
                  >
                  >
                  > Just out of curiosity, do you know of anyone who sells reeds switches
                  > of this type?
                  >

                  >
                  >

                  --
                  Rich
                • jdonovanwv5
                  Thanks Rich! I appreciate the information! But I know very little about how reed switches are classified/measured. How do you read what a specific reed
                  Message 8 of 15 , May 2, 2008
                  • 0 Attachment
                    Thanks Rich! I appreciate the information! But I know very little
                    about how reed switches are classified/measured. How do you read
                    what a specific reed switch is, and what do the parameters/
                    classifications mean?? there seem to be a zillion different models
                    out there. I understand resistance and capacitance, but what is
                    reedswitchance?

                    Thanks in advance.......

                    --- In wuhu_software_group@yahoogroups.com, Rich Brunnworth
                    <ibbrunnie@...> wrote:
                    >
                    > DigiKey sells all kinds of reed switches.
                    >
                    > Rich
                    >
                    > jdonovanwv5 wrote:
                    > >
                    > >
                    > >
                    > > Just out of curiosity, do you know of anyone who sells reeds
                    switches
                    > > of this type?
                    > >
                    >
                    > >
                    >
                  • Rich Brunnworth
                    When I was chasing a switch, I first measured the dimensions of it, then I looked at how much magnetism it tool to activate. Basically you are looking for a
                    Message 9 of 15 , May 2, 2008
                    • 0 Attachment
                      When I was chasing a switch, I first measured the dimensions of it, then
                      I looked at how much magnetism it tool to activate.

                      Basically you are looking for a switch like the Coto RI-02A, Digikey
                      part number 306-1170NO. This switch is on page 1835 catalog T072.

                      Rich

                      jdonovanwv5 wrote:
                      >
                      > Thanks Rich! I appreciate the information! But I know very little
                      > about how reed switches are classified/measured. How do you read
                      > what a specific reed switch is, and what do the parameters/
                      > classifications mean?? there seem to be a zillion different models
                      > out there. I understand resistance and capacitance, but what is
                      > reedswitchance?
                      >



                      >

                      --
                      Rich
                    • Jon Golubiewski
                      Newark.com and Mouser.com are two other electronics supply houses. Sometimes the minimum shipping will kill ya,
                      Message 10 of 15 , May 2, 2008
                      • 0 Attachment
                        Newark.com and Mouser.com are two other electronics supply houses.  Sometimes the minimum shipping will kill ya, so it's cheaper to try to find something local.

                        I just had to replace the reed switch in my rain bucket.  I went to Radio Shack, but couldn't find a reed switch.  They did have reed relay switches, so I grabbed one of those for $2-3 to see if I could make it work.  It worked just fine.  The reed switch relay is a reed switch with a coil to actuate the reed relay.  I didn't need the coil to actuate the relay, but I used the magnet on the tipping bucket instead and it worked fine.  I just used the contacts for the switch (as printed on the back of the package) and didn't use the contacts for the coil.  Bottom line is that if you can't find a reed switch, a reed relay switch will probably work just as well. 

                        I had also looked at using the magnetic switches used in alarm components.  However, they were generally normally closed (we need normally open or N.O.) and required a larger magnet.

                        Failsafe - go with what Rich recommended. 

                        Jon G.

                        On Fri, May 2, 2008 at 10:58 PM, Rich Brunnworth <ibbrunnie@...> wrote:

                        When I was chasing a switch, I first measured the dimensions of it, then
                        I looked at how much magnetism it tool to activate.

                        Basically you are looking for a switch like the Coto RI-02A, Digikey
                        part number 306-1170NO. This switch is on page 1835 catalog T072.

                        Rich



                        jdonovanwv5 wrote:
                        >
                        > Thanks Rich! I appreciate the information! But I know very little
                        > about how reed switches are classified/measured. How do you read
                        > what a specific reed switch is, and what do the parameters/
                        > classifications mean?? there seem to be a zillion different models
                        > out there. I understand resistance and capacitance, but what is
                        > reedswitchance?
                        >

                        >

                        --
                        Rich


                      • jdonovanwv5
                        Thanks guys for sharing you experience! That s really helpful Joe ... Radio ... switches, ... It ... coil to ... relay, but I ... I just ... package) and ...
                        Message 11 of 15 , May 3, 2008
                        • 0 Attachment
                          Thanks guys for sharing you experience! That's really helpful

                          Joe


                          --- In wuhu_software_group@yahoogroups.com, "Jon
                          Golubiewski" <NH4x4Jeep@...> wrote:
                          >
                          > Newark.com <http://www.Newark.com> and Mouser.com
                          > <http://www.Mouser.com>are two other electronics supply houses.
                          > Sometimes the minimum shipping
                          > will kill ya, so it's cheaper to try to find something local.
                          >
                          > I just had to replace the reed switch in my rain bucket. I went to
                          Radio
                          > Shack, but couldn't find a reed switch. They did have reed relay
                          switches,
                          > so I grabbed one of those for $2-3 to see if I could make it work.
                          It
                          > worked just fine. The reed switch relay is a reed switch with a
                          coil to
                          > actuate the reed relay. I didn't need the coil to actuate the
                          relay, but I
                          > used the magnet on the tipping bucket instead and it worked fine.
                          I just
                          > used the contacts for the switch (as printed on the back of the
                          package) and
                          > didn't use the contacts for the coil. Bottom line is that if you
                          can't find
                          > a reed switch, a reed relay switch will probably work just as well.
                          >
                          > I had also looked at using the magnetic switches used in alarm
                          components.
                          > However, they were generally normally closed (we need normally open
                          or N.O.)
                          > and required a larger magnet.
                          >
                          > Failsafe - go with what Rich recommended.
                          >
                          > Jon G.
                          >
                          > On Fri, May 2, 2008 at 10:58 PM, Rich Brunnworth <ibbrunnie@...>
                          > wrote:
                          >
                          > > When I was chasing a switch, I first measured the dimensions of
                          it, then
                          > >
                          > > I looked at how much magnetism it tool to activate.
                          > >
                          > > Basically you are looking for a switch like the Coto RI-02A,
                          Digikey
                          > > part number 306-1170NO. This switch is on page 1835 catalog T072.
                          > >
                          > > Rich
                          > >
                          > >
                          > > jdonovanwv5 wrote:
                          > > >
                          > > > Thanks Rich! I appreciate the information! But I know very
                          little
                          > > > about how reed switches are classified/measured. How do you read
                          > > > what a specific reed switch is, and what do the parameters/
                          > > > classifications mean?? there seem to be a zillion different
                          models
                          > > > out there. I understand resistance and capacitance, but what is
                          > > > reedswitchance?
                          > > >
                          > >
                          > > >
                          > >
                          > > --
                          > > Rich
                          > >
                          > >
                          > >
                          >
                        Your message has been successfully submitted and would be delivered to recipients shortly.