Loading ...
Sorry, an error occurred while loading the content.
 

RE: [wuhu_software_group] Corrupt data detected

Expand Messages
  • M. A.P
    I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is
    Message 1 of 15 , May 1, 2008

      I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is trying, at this time to obtain WWVB radio controlled time - It always appears at around the same time but not every day.
       
      I don't see any curruption of the data.
       
       
      Thu May 01 01:06:06 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:15 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:24 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:33 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:41 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:50 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:59 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:06:59 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
      Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
      Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully, attempting to resume communications.
      Thu May 01 01:07:13 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:22 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:31 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:40 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:49 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:07:58 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:07 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:07 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
      Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
      Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully, attempting to resume communications.
      Thu May 01 01:08:20 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:29 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:38 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:47 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:08:56 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:05 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:14 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:14 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
      Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
      Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to resume communications.
      Thu May 01 01:09:28 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:37 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:46 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
      Thu May 01 01:09:54 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.





      Back to work after baby– how do you know when you’re ready?
    • Joseph R Vaughn
      I have a WS-2308 and I get the same message but I have just been ignoring it. Joe ... From: wuhu_software_group@yahoogroups.com
      Message 2 of 15 , May 1, 2008

        I have a WS-2308 and I get the same message but I have just been ignoring it.

         

        Joe

         

        -----Original Message-----
        From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of M. A.P
        Sent: Thursday, May 01, 2008 8:57 AM
        To: wuhu_software_group@yahoogroups.com
        Subject: RE: [wuhu_software_group] Corrupt data detected

         


        I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is trying, at this time to obtain WWVB radio controlled time - It always appears at around the same time but not every day.
         
        I don't see any curruption of the data.
         
         
        Thu May 01 01:06:06 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:15 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:24 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:33 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:41 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:50 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:59 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:06:59 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
        Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
        Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully, attempting to resume communications.
        Thu May 01 01:07:13 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:22 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:31 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:40 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:49 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:07:58 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:07 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:07 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
        Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
        Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully, attempting to resume communications.
        Thu May 01 01:08:20 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:29 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:38 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:47 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:08:56 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:05 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:14 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:14 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
        Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
        Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to resume communications.
        Thu May 01 01:09:28 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:37 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:46 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
        Thu May 01 01:09:54 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.




        Back to work after baby– how do you know when you’re ready?

      • Jaye Ellen
        Hi --- It s been my experience that this sort of thing can happen if the Console Clock and Computer Clock are more than a minute or so different... quirk of
        Message 3 of 15 , May 1, 2008
          Hi ---
           
          It's been my experience that this sort of thing can happen if the Console Clock and Computer Clock are more than a minute or so different... quirk of the systems?
           
          Jaye Ellen

          On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn <jrvaughn@...> wrote:

          I have a WS-2308 and I get the same message but I have just been ignoring it.

           

          Joe

           

          -----Original Message-----
          From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of M. A.P
          Sent: Thursday, May 01, 2008 8:57 AM
          To: wuhu_software_group@yahoogroups.com
          Subject: RE: [wuhu_software_group] Corrupt data detected

           


          I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is trying, at this time to obtain WWVB radio controlled time - It always appears at around the same time but not every day.
           
          I don't see any curruption of the data.
           
           
          Thu May 01 01:06:06 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:15 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:24 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:33 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:41 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:50 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:59 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:06:59 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
          Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
          Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully, attempting to resume communications.
          Thu May 01 01:07:13 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:07:22 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:07:31 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:07:40 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:07:49 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:07:58 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:08:07 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:08:07 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
          Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
          Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully, attempting to resume communications.
          Thu May 01 01:08:20 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:08:29 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:08:38 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:08:47 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:08:56 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:09:05 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:09:14 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:09:14 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
          Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
          Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to resume communications.
          Thu May 01 01:09:28 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:09:37 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:09:46 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
          Thu May 01 01:09:54 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.




          Back to work after baby– how do you know when you're ready?




          --
          Jaye Ellen
        • Joseph R Vaughn
          Both have the same time. Joe ... From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of Jaye Ellen Sent: Thursday,
          Message 4 of 15 , May 1, 2008

            Both have the same time.

             

            Joe

             

            -----Original Message-----
            From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of Jaye Ellen
            Sent: Thursday, May 01, 2008 9:27 AM
            To: wuhu_software_group@yahoogroups.com
            Subject: Re: [wuhu_software_group] Corrupt data detected

             

            Hi ---

             

            It's been my experience that this sort of thing can happen if the Console Clock and Computer Clock are more than a minute or so different... quirk of the systems?

             

            Jaye Ellen

            On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn <jrvaughn@vaughnent. com> wrote:

            I have a WS-2308 and I get the same message but I have just been ignoring it.

             

            Joe

             

            -----Original Message-----
            From: wuhu_software_ group@yahoogroup s.com [mailto:wuhu_software_ group@yahoogroup s.com] On Behalf Of M. A.P
            Sent: Thursday, May 01, 2008 8:57 AM
            To: wuhu_software_ group@yahoogroup s.com
            Subject: RE: [wuhu_software_ group] Corrupt data detected

             


            I have a WS2316 (/w direct serial access) that regularly gets the following error messages. Should I assume that the WS2316 is not responding to WUHU as it is trying, at this time to obtain WWVB radio controlled time - It always appears at around the same time but not every day.
             
            I don't see any curruption of the data.
             
             
            Thu May 01 01:06:06 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:15 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:24 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:33 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:41 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:50 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:59 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:06:59 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
            Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
            Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully, attempting to resume communications.
            Thu May 01 01:07:13 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:07:22 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:07:31 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:07:40 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:07:49 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:07:58 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:08:07 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:08:07 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
            Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
            Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully, attempting to resume communications.
            Thu May 01 01:08:20 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:08:29 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:08:38 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:08:47 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:08:56 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:09:05 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:09:14 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:09:14 2008 > Detected consecutive communications failures. Attempting to recover by re-opening the port.
            Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
            Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to resume communications.
            Thu May 01 01:09:28 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:09:37 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:09:46 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.
            Thu May 01 01:09:54 2008 > Failed to retrieve weather data from console. Possible invalid/corrupt data detected.



            Back to work after baby– how do you know when you're ready?




            --
            Jaye Ellen

          • steve_03222
            Joe, Another possibility if the times all match is that the setting for daylight savings time is off. There is a setting for EDT on or off in the setup. I
            Message 5 of 15 , May 1, 2008
              Joe,
              Another possibility if the times all match is that the setting for
              daylight savings time is off. There is a setting for EDT on or off
              in the setup. I don't get the signal and manually set my console.
              One time I just changed the time by 1 hour and all seemed fine
              except for what you mentioned. I found the EDT on or off and use
              that now to change the hour ahead or behind. I am not home right
              now, but as I write it is probably listed as DST on or off.
              Steve



              --- In wuhu_software_group@yahoogroups.com, "Joseph R Vaughn"
              <jrvaughn@...> wrote:
              >
              > Both have the same time.
              >
              >
              >
              > Joe
              >
              >
              >
              > -----Original Message-----
              > From: wuhu_software_group@yahoogroups.com
              > [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of Jaye
              Ellen
              > Sent: Thursday, May 01, 2008 9:27 AM
              > To: wuhu_software_group@yahoogroups.com
              > Subject: Re: [wuhu_software_group] Corrupt data detected
              >
              >
              >
              > Hi ---
              >
              >
              >
              > It's been my experience that this sort of thing can happen if the
              Console
              > Clock and Computer Clock are more than a minute or so different...
              quirk of
              > the systems?
              >
              >
              >
              > Jaye Ellen
              >
              > On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn
              <jrvaughn@vaughnent.
              > <mailto:jrvaughn@...> com> wrote:
              >
              > I have a WS-2308 and I get the same message but I have just been
              ignoring
              > it.
              >
              >
              >
              > Joe
              >
              >
              >
              > -----Original Message-----
              > From: wuhu_software_ <mailto:wuhu_software_group@yahoogroups.com>
              > group@yahoogroups.com [mailto:wuhu_software_
              > <mailto:wuhu_software_group@yahoogroups.com>
              group@yahoogroups.com] On
              > Behalf Of M. A.P
              > Sent: Thursday, May 01, 2008 8:57 AM
              > To: wuhu_software_ <mailto:wuhu_software_group@yahoogroups.com>
              > group@yahoogroups.com
              > Subject: RE: [wuhu_software_group] Corrupt data detected
              >
              >
              >
              >
              > I have a WS2316 (/w direct serial access) that regularly gets the
              following
              > error messages. Should I assume that the WS2316 is not responding
              to WUHU as
              > it is trying, at this time to obtain WWVB radio controlled time -
              It always
              > appears at around the same time but not every day.
              >
              > I don't see any curruption of the data.
              >
              >
              > Thu May 01 01:06:06 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:15 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:24 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:33 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:41 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:50 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:59 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:06:59 2008 > Detected consecutive communications
              failures.
              > Attempting to recover by re-opening the port.
              > Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
              > Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully,
              attempting to
              > resume communications.
              > Thu May 01 01:07:13 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:07:22 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:07:31 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:07:40 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:07:49 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:07:58 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:08:07 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:08:07 2008 > Detected consecutive communications
              failures.
              > Attempting to recover by re-opening the port.
              > Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
              > Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully,
              attempting to
              > resume communications.
              > Thu May 01 01:08:20 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:08:29 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:08:38 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:08:47 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:08:56 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:09:05 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:09:14 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:09:14 2008 > Detected consecutive communications
              failures.
              > Attempting to recover by re-opening the port.
              > Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
              > Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully,
              attempting to
              > resume communications.
              > Thu May 01 01:09:28 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:09:37 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:09:46 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              > Thu May 01 01:09:54 2008 > Failed to retrieve weather data from
              console.
              > Possible invalid/corrupt data detected.
              >
              >
              >
              > _____
              >
              > Back to work after baby- how do you know when you're ready?
              > <http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-
              documentid=57
              > 97498&ocid=T067MSN40A0701A>
              >
              >
              >
              >
              > --
              > Jaye Ellen
              >
            • Joseph R Vaughn
              I get the time signal from Colorado and Bill Gates has set my CPU on daylight savings. I don t think that the issue. Joe ... From:
              Message 6 of 15 , May 1, 2008

                I get the time signal from Colorado and Bill Gates has set my CPU on daylight savings. I don’t think that the issue.

                 

                Joe

                 

                -----Original Message-----
                From: wuhu_software_group@yahoogroups.com [mailto:wuhu_software_group@yahoogroups.com] On Behalf Of steve_03222
                Sent: Thursday, May 01, 2008 1:40 PM
                To: wuhu_software_group@yahoogroups.com
                Subject: [wuhu_software_group] Re: Corrupt data detected

                 

                Joe,
                Another possibility if the times all match is that the setting for
                daylight savings time is off. There is a setting for EDT on or off
                in the setup. I don't get the signal and manually set my console.
                One time I just changed the time by 1 hour and all seemed fine
                except for what you mentioned. I found the EDT on or off and use
                that now to change the hour ahead or behind. I am not home right
                now, but as I write it is probably listed as DST on or off.
                Steve

                --- In wuhu_software_ group@yahoogroup s.com, "Joseph R Vaughn"
                <jrvaughn@.. .> wrote:

                >
                > Both have the same time.
                >
                >
                >
                > Joe
                >
                >
                >
                > -----Original Message-----
                > From: wuhu_software_ group@yahoogroup s.com
                > [mailto:wuhu_software_ group@yahoogroup s.com]
                On Behalf Of Jaye
                Ellen
                > Sent: Thursday, May 01, 2008 9:27 AM
                > To: wuhu_software_ group@yahoogroup s.com
                > Subject: Re: [wuhu_software_ group] Corrupt data detected
                >
                >
                >
                > Hi ---
                >
                >
                >
                > It's been my experience that this sort of thing can happen if the
                Console
                > Clock and Computer Clock are more than a minute or so different...
                quirk of
                > the systems?
                >
                >
                >
                > Jaye Ellen
                >
                > On Thu, May 1, 2008 at 11:02 AM, Joseph R Vaughn
                <jrvaughn@vaughnent .
                > <mailto:jrvaughn@ ...> com> wrote:
                >
                > I have a WS-2308 and I get the same message but I have just been
                ignoring
                > it.
                >
                >
                >
                > Joe
                >
                >
                >
                > -----Original Message-----
                > From: wuhu_software_ <mailto:
                href="mailto:wuhu_software_group%40yahoogroups.com">wuhu_software_ group@yahoogroup s.com>
                > group@yahoogroups. com
                [mailto:wuhu_ software_
                > <mailto:wuhu_software_ group@yahoogroup s.com>
                group@yahoogroups. com] On
                > Behalf Of M. A.P
                > Sent: Thursday, May 01, 2008 8:57 AM
                > To: wuhu_software_ <mailto:
                href="mailto:wuhu_software_group%40yahoogroups.com">wuhu_software_ group@yahoogroup s.com>
                > group@yahoogroups. com
                > Subject: RE: [wuhu_software_ group] Corrupt data detected
                >
                >
                >
                >
                > I have a WS2316 (/w direct serial access) that regularly gets the
                following
                > error messages. Should I assume that the WS2316 is not responding
                to WUHU as
                > it is trying, at this time to obtain WWVB radio controlled time -
                It always
                > appears at around the same time but not every day.
                >
                > I don't see any curruption of the data.
                >
                >
                > Thu May 01 01:06:06 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:15 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:24 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:33 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:41 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:50 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:59 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:06:59 2008 > Detected consecutive communications
                failures.
                > Attempting to recover by re-opening the port.
                > Thu May 01 01:07:09 2008 > Attempting to re-open port COM2.
                > Thu May 01 01:07:09 2008 > Port COM2 re-opened successfully,
                attempting to
                > resume communications.
                > Thu May 01 01:07:13 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:07:22 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:07:31 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:07:40 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:07:49 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:07:58 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:08:07 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:08:07 2008 > Detected consecutive communications
                failures.
                > Attempting to recover by re-opening the port.
                > Thu May 01 01:08:17 2008 > Attempting to re-open port COM2.
                > Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully,
                attempting to
                > resume communications.
                > Thu May 01 01:08:20 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:08:29 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:08:38 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:08:47 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:08:56 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:09:05 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:09:14 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:09:14 2008 > Detected consecutive communications
                failures.
                > Attempting to recover by re-opening the port.
                > Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.
                > Thu May 01 01:09:24 2008 > Port COM2 re-opened successfully,
                attempting to
                > resume communications.
                > Thu May 01 01:09:28 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:09:37 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:09:46 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                > Thu May 01 01:09:54 2008 > Failed to retrieve weather data from
                console.
                > Possible invalid/corrupt data detected.
                >
                >
                >
                > _____
                >
                > Back to work after baby- how do you know when you're ready?
                > <
                href="http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-">http://lifestyle. msn.com/familyan dparenting/ articleNW. aspx?cp-
                documentid=57
                > 97498&ocid=T067MSN4 0A0701A>
                >
                >
                >
                >
                > --
                > Jaye Ellen
                >

              • Rick
                Thats your atomic clock trying to update I believe. If your Clock and the console are off my more than 30 secs you will get those errors. RICK KOHWAPAK1
                Message 7 of 15 , May 1, 2008
                  Thats your atomic clock trying to update I believe. If your Clock and
                  the console are off my more than 30 secs you will get those errors.

                  RICK
                  KOHWAPAK1

                  http://www.wapakweather.com/


                  --- In wuhu_software_group@yahoogroups.com, "M. A.P" <m_a_p@...> wrote:
                  >
                  >
                  > I have a WS2316 (/w direct serial access) that regularly gets the
                  following error messages. Should I assume that the WS2316 is not
                  responding to WUHU as it is trying, at this time to obtain WWVB radio
                  controlled time - It always appears at around the same time but not
                  every day.
                  >
                  > I don't see any curruption of the data.
                  >
                  >
                  > Thu May 01 01:06:06 2008 > Failed to retrieve weather data from
                  console. Possible invalid/corrupt data detected.Thu May 01 01:06:15
                  2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:06:24 2008 > Failed to
                  retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:06:33 2008 > Failed to retrieve weather data
                  from console. Possible invalid/corrupt data detected.Thu May 01
                  01:06:41 2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:06:50 2008 > Failed to
                  retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:06:59 2008 > Failed to retrieve weather data
                  from console. Possible invalid/corrupt data detected.Thu May 01
                  01:06:59 2008 > Detected consecutive communications failures.
                  Attempting to recover by re-opening the port.Thu May 01 01:07:09 2008
                  > Attempting to re-open port COM2.Thu May 01 01:07:09 2008 > Port COM2
                  re-opened successfully, attempting to resume communications.Thu May 01
                  01:07:13 2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:07:22 2008 > Failed to
                  retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:07:31 2008 > Failed to retrieve weather data
                  from console. Possible invalid/corrupt data detected.Thu May 01
                  01:07:40 2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:07:49 2008 > Failed to
                  retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:07:58 2008 > Failed to retrieve weather data
                  from console. Possible invalid/corrupt data detected.Thu May 01
                  01:08:07 2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:08:07 2008 > Detected
                  consecutive communications failures. Attempting to recover by
                  re-opening the port.Thu May 01 01:08:17 2008 > Attempting to re-open
                  port COM2.Thu May 01 01:08:17 2008 > Port COM2 re-opened successfully,
                  attempting to resume communications.Thu May 01 01:08:20 2008 > Failed
                  to retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:08:29 2008 > Failed to retrieve weather data
                  from console. Possible invalid/corrupt data detected.Thu May 01
                  01:08:38 2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:08:47 2008 > Failed to
                  retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:08:56 2008 > Failed to retrieve weather data
                  from console. Possible invalid/corrupt data detected.Thu May 01
                  01:09:05 2008 > Failed to retrieve weather data from console. Possible
                  invalid/corrupt data detected.Thu May 01 01:09:14 2008 > Failed to
                  retrieve weather data from console. Possible invalid/corrupt data
                  detected.Thu May 01 01:09:14 2008 > Detected consecutive
                  communications failures. Attempting to recover by re-opening the
                  port.Thu May 01 01:09:24 2008 > Attempting to re-open port COM2.Thu
                  May 01 01:09:24 2008 > Port COM2 re-opened successfully, attempting to
                  resume communications.Thu May 01 01:09:28 2008 > Failed to retrieve
                  weather data from console. Possible invalid/corrupt data detected.Thu
                  May 01 01:09:37 2008 > Failed to retrieve weather data from console.
                  Possible invalid/corrupt data detected.Thu May 01 01:09:46 2008 >
                  Failed to retrieve weather data from console. Possible invalid/corrupt
                  data detected.Thu May 01 01:09:54 2008 > Failed to retrieve weather
                  data from console. Possible invalid/corrupt data detected.
                  > _________________________________________________________________
                  > Back to work after baby–how do you know when you're ready?
                  >
                  http://lifestyle.msn.com/familyandparenting/articleNW.aspx?cp-documentid=5797498&ocid=T067MSN40A0701A
                  >
                • jdonovanwv5
                  The ID on the tygon tubing is about 5/16 , just a hair over the 1/4 on the LaCrosse cover -- also the same length. I have the tubing set down low enough
                  Message 8 of 15 , May 1, 2008
                    The ID on the tygon tubing is about 5/16", just a hair over the 1/4"
                    on the LaCrosse cover -- also the same length. I have the tubing set
                    down low enough (just about 2 mm over the pivot crest) that I believe
                    not, the shield on the board is a good 3/4" higher, but will check
                    after a good intense rain for inside moisture. Of course it carries
                    twice the flow of water in an equivalent storm compared to the
                    original. Splashing would not only endanger the board (shorting
                    across the power lead) but also lose water, so I'll keep an eye on
                    comparison to nearby stations. We had a couple of inches both this
                    week and last, and so far, it looks to be consistent. I also have a
                    calibration bottle that leaks out slowly, and it checks. But for
                    splashing, it is how it handles intense rain that counts.

                    I am not sure I have enough drain holes in the base, but I'll see
                    what it looks like in there and if needed can pop more drain
                    holes.....The bottom of the can is not a watertight fit either no
                    hopefully it will stay dry in there.

                    Just out of curiosity, do you know of anyone who sells reeds switches
                    of this type?

                    Joe


                    --- In wuhu_software_group@yahoogroups.com,
                    "wuhu_software" <wuhu_software@...> wrote:
                    >
                    >
                    > Joe,
                    >
                    > Nice job on the bucket.
                    >
                    > I did have one question, at the end of the funnel, is the water
                    > stream isolated so it does not spray water on to the circuit board?
                    >
                    > Thanks for sharing.
                    >
                    >
                    >
                  • Rich Brunnworth
                    DigiKey sells all kinds of reed switches. Rich ... -- Rich
                    Message 9 of 15 , May 1, 2008
                      DigiKey sells all kinds of reed switches.

                      Rich

                      jdonovanwv5 wrote:
                      >
                      >
                      >
                      > Just out of curiosity, do you know of anyone who sells reeds switches
                      > of this type?
                      >

                      >
                      >

                      --
                      Rich
                    • jdonovanwv5
                      Thanks Rich! I appreciate the information! But I know very little about how reed switches are classified/measured. How do you read what a specific reed
                      Message 10 of 15 , May 2, 2008
                        Thanks Rich! I appreciate the information! But I know very little
                        about how reed switches are classified/measured. How do you read
                        what a specific reed switch is, and what do the parameters/
                        classifications mean?? there seem to be a zillion different models
                        out there. I understand resistance and capacitance, but what is
                        reedswitchance?

                        Thanks in advance.......

                        --- In wuhu_software_group@yahoogroups.com, Rich Brunnworth
                        <ibbrunnie@...> wrote:
                        >
                        > DigiKey sells all kinds of reed switches.
                        >
                        > Rich
                        >
                        > jdonovanwv5 wrote:
                        > >
                        > >
                        > >
                        > > Just out of curiosity, do you know of anyone who sells reeds
                        switches
                        > > of this type?
                        > >
                        >
                        > >
                        >
                      • Rich Brunnworth
                        When I was chasing a switch, I first measured the dimensions of it, then I looked at how much magnetism it tool to activate. Basically you are looking for a
                        Message 11 of 15 , May 2, 2008
                          When I was chasing a switch, I first measured the dimensions of it, then
                          I looked at how much magnetism it tool to activate.

                          Basically you are looking for a switch like the Coto RI-02A, Digikey
                          part number 306-1170NO. This switch is on page 1835 catalog T072.

                          Rich

                          jdonovanwv5 wrote:
                          >
                          > Thanks Rich! I appreciate the information! But I know very little
                          > about how reed switches are classified/measured. How do you read
                          > what a specific reed switch is, and what do the parameters/
                          > classifications mean?? there seem to be a zillion different models
                          > out there. I understand resistance and capacitance, but what is
                          > reedswitchance?
                          >



                          >

                          --
                          Rich
                        • Jon Golubiewski
                          Newark.com and Mouser.com are two other electronics supply houses. Sometimes the minimum shipping will kill ya,
                          Message 12 of 15 , May 2, 2008
                            Newark.com and Mouser.com are two other electronics supply houses.  Sometimes the minimum shipping will kill ya, so it's cheaper to try to find something local.

                            I just had to replace the reed switch in my rain bucket.  I went to Radio Shack, but couldn't find a reed switch.  They did have reed relay switches, so I grabbed one of those for $2-3 to see if I could make it work.  It worked just fine.  The reed switch relay is a reed switch with a coil to actuate the reed relay.  I didn't need the coil to actuate the relay, but I used the magnet on the tipping bucket instead and it worked fine.  I just used the contacts for the switch (as printed on the back of the package) and didn't use the contacts for the coil.  Bottom line is that if you can't find a reed switch, a reed relay switch will probably work just as well. 

                            I had also looked at using the magnetic switches used in alarm components.  However, they were generally normally closed (we need normally open or N.O.) and required a larger magnet.

                            Failsafe - go with what Rich recommended. 

                            Jon G.

                            On Fri, May 2, 2008 at 10:58 PM, Rich Brunnworth <ibbrunnie@...> wrote:

                            When I was chasing a switch, I first measured the dimensions of it, then
                            I looked at how much magnetism it tool to activate.

                            Basically you are looking for a switch like the Coto RI-02A, Digikey
                            part number 306-1170NO. This switch is on page 1835 catalog T072.

                            Rich



                            jdonovanwv5 wrote:
                            >
                            > Thanks Rich! I appreciate the information! But I know very little
                            > about how reed switches are classified/measured. How do you read
                            > what a specific reed switch is, and what do the parameters/
                            > classifications mean?? there seem to be a zillion different models
                            > out there. I understand resistance and capacitance, but what is
                            > reedswitchance?
                            >

                            >

                            --
                            Rich


                          • jdonovanwv5
                            Thanks guys for sharing you experience! That s really helpful Joe ... Radio ... switches, ... It ... coil to ... relay, but I ... I just ... package) and ...
                            Message 13 of 15 , May 3, 2008
                              Thanks guys for sharing you experience! That's really helpful

                              Joe


                              --- In wuhu_software_group@yahoogroups.com, "Jon
                              Golubiewski" <NH4x4Jeep@...> wrote:
                              >
                              > Newark.com <http://www.Newark.com> and Mouser.com
                              > <http://www.Mouser.com>are two other electronics supply houses.
                              > Sometimes the minimum shipping
                              > will kill ya, so it's cheaper to try to find something local.
                              >
                              > I just had to replace the reed switch in my rain bucket. I went to
                              Radio
                              > Shack, but couldn't find a reed switch. They did have reed relay
                              switches,
                              > so I grabbed one of those for $2-3 to see if I could make it work.
                              It
                              > worked just fine. The reed switch relay is a reed switch with a
                              coil to
                              > actuate the reed relay. I didn't need the coil to actuate the
                              relay, but I
                              > used the magnet on the tipping bucket instead and it worked fine.
                              I just
                              > used the contacts for the switch (as printed on the back of the
                              package) and
                              > didn't use the contacts for the coil. Bottom line is that if you
                              can't find
                              > a reed switch, a reed relay switch will probably work just as well.
                              >
                              > I had also looked at using the magnetic switches used in alarm
                              components.
                              > However, they were generally normally closed (we need normally open
                              or N.O.)
                              > and required a larger magnet.
                              >
                              > Failsafe - go with what Rich recommended.
                              >
                              > Jon G.
                              >
                              > On Fri, May 2, 2008 at 10:58 PM, Rich Brunnworth <ibbrunnie@...>
                              > wrote:
                              >
                              > > When I was chasing a switch, I first measured the dimensions of
                              it, then
                              > >
                              > > I looked at how much magnetism it tool to activate.
                              > >
                              > > Basically you are looking for a switch like the Coto RI-02A,
                              Digikey
                              > > part number 306-1170NO. This switch is on page 1835 catalog T072.
                              > >
                              > > Rich
                              > >
                              > >
                              > > jdonovanwv5 wrote:
                              > > >
                              > > > Thanks Rich! I appreciate the information! But I know very
                              little
                              > > > about how reed switches are classified/measured. How do you read
                              > > > what a specific reed switch is, and what do the parameters/
                              > > > classifications mean?? there seem to be a zillion different
                              models
                              > > > out there. I understand resistance and capacitance, but what is
                              > > > reedswitchance?
                              > > >
                              > >
                              > > >
                              > >
                              > > --
                              > > Rich
                              > >
                              > >
                              > >
                              >
                            Your message has been successfully submitted and would be delivered to recipients shortly.