Loading ...
Sorry, an error occurred while loading the content.

7815Re: Variables template min-max weather data

Expand Messages
  • petros0022
    Sep 7, 2007
    • 0 Attachment
      Ok WUHU author my is mistake i forget to mark wrriten extended
      data
      all is ok now thank you very much

      Dimitris from Greece
      http://www.geocities.com/meteo19671967





      --- In wuhu_software_group@yahoogroups.com, "petros0022"
      <petros0022@...> wrote:
      >
      > WUHU author i do it, but i don not see anything in new file on
      > notepad .
      >
      > I do this
      > i do a new file D:\ActionList.txt and I put inside this
      > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
      > template:"D:\minmax.txt" "D:\minmaxoutput.txt"
      >
      > ACTION and activation i put inside this
      > actionfile:"D:\ActionList.txt"
      >
      > AND a file from notepad name "D:\minmaxoutput.txt"
      >
      > and i put inside this
      >
      > %[daily_extremes]low_outdoor_temperature_deg_C%
      > %[daily_extremes]high_outdoor_temperature_deg_C%
      > %[daily_extremes]low_outdoor_humidity%
      > %[daily_extremes]high_outdoor_humidity%
      > %[daily_extremes]low_outdoor_dewpoint_deg_C%
      > %[daily_extremes]high_outdoor_dewpoint_deg_C%
      > %[daily_extremes]low_outdoor_relative_pressure_hpa%
      > %[daily_extremes]high_outdoor_relative_pressure_hpa%
      > %[daily_extremes]low_outdoor_wind_speed_km/h%
      > %[daily_extremes]high_outdoor_wind_speed_km/h%
      >
      > i see in D:/ disk a new notepad name minmaxoutput but it is empty
      it
      > no wrriten inside nothing
      >
      > Where is my wrong ??
      >
      > Thank you Dimitris
      >
      >
      >
      > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > <wuhu_software@> wrote:
      > >
      > > _time variables contain AM/PM, hh:mm:ss AM/PM
      > >
      > > _time_hms variables are the 24 hour format: hh:mm:ss
      > >
      > >
      > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
      > > <petros0022@> wrote:
      > > >
      > > > Thank you WUHU i will try it
      > > >
      > > > i put and wind at km/h is corect ??i see variables have %time%
      > and
      > > > time_hms what is hms ,and i put and time it time it was styl
      > > > 12:30 ???
      > > >
      > > > I see for it i must to go from another way and no like before
      > like
      > > > zwntana.txt file .
      > > >
      > > > %[daily_extremes]low_outdoor_temperature_deg_C%
      > > > %[daily_extremes]high_outdoor_temperature_deg_C%
      > > > %[daily_extremes]low_outdoor_humidity%
      > > > %[daily_extremes]high_outdoor_humidity%
      > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
      > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
      > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
      > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
      > > > %[daily_extremes]low_outdoor_wind_speed_km/h%
      > > > %[daily_extremes]high_outdoor_wind_speed_km/h%
      > > >
      > > > Thank you
      > > > Dimitris
      > > >
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > <wuhu_software@> wrote:
      > > > >
      > > > > Dimitris,
      > > > >
      > > > > Before following the below, hit Stop on WUHU so that it is
      not
      > > > > attempting to process templates while you are making changes.
      > > > >
      > > > > Since you are wanting to process multiple template files, I
      > would
      > > > > recommend creating an action file. Action files allow you to
      > > > process
      > > > > multiple templates and other commands, one per line.
      > > > >
      > > > > To use an action file, would would enter the following line
      in
      > to
      > > > the
      > > > > action on activation:
      > > > >
      > > > > actionfile:"C:\ActionList.txt"
      > > > >
      > > > > Open notepad. Enter the following lines:
      > > > >
      > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt"
      > > > > template:"D:\mynewtemplate.txt" "D:\mynewtemplateoutput.txt"
      > > > >
      > > > > Save this file to C:\ActionList.txt
      > > > >
      > > > > Create a new Notepad file, enter the following:
      > > > >
      > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
      > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
      > > > > %[daily_extremes]low_outdoor_humidity%
      > > > > %[daily_extremes]high_outdoor_humidity%
      > > > > %[daily_extremes]low_outdoor_dewpoint_deg_C%
      > > > > %[daily_extremes]high_outdoor_dewpoint_deg_C%
      > > > > %[daily_extremes]low_outdoor_relative_pressure_hpa%
      > > > > %[daily_extremes]high_outdoor_relative_pressure_hpa%
      > > > >
      > > > > Save this file to C:\mynewtemplate.txt
      > > > >
      > > > > Press start on WUHU to resume processing.
      > > > >
      > > > > After an update, the following files should be created:
      > > > >
      > > > > D:\zwntana.txt
      > > > > D:\mynewtemplateoutput.txt
      > > > >
      > > > >
      > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
      > > > > <petros0022@> wrote:
      > > > > >
      > > > > > Yes WUHU author nad thank you
      > > > > >
      > > > > > Do you make for me a template like this for max-min
      > > > > > temperature,humidity,wind,dew point,barometer ,pressure ??
      > > > > > And tell me please what to do step by step : i think Alert
      > > > action --
      > > > > >
      > > > > > WUHU operation alarm Action -->mark on weather up date -->
      > > press
      > > > > > sound action -->and action and activation i put like it
      > > > > > template:"D:\inputzwntana.txt" "D:\zwntana.txt" ?? i am
      > > correct
      > > > or
      > > > > > no ??.
      > > > > >
      > > > > > Thank you
      > > > > > Dimitris from Greece
      > > > > > http://www.geocities.com/meteo19671967
      > > > > >
      > > > > >
      > > > > >
      > > > > > --- In
      wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > <wuhu_software@> wrote:
      > > > > > >
      > > > > > > Dimitris,
      > > > > > >
      > > > > > > Are you talking about the extended currdat.lst template
      > > > variables
      > > > > > like:
      > > > > > >
      > > > > > > %[daily_extremes]low_outdoor_temperature_deg_C%
      > > > > > > %[daily_extremes]high_outdoor_temperature_deg_C%
      > > > > > >
      > > > > > > and so on?
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > > > --- In wuhu_software_group@yahoogroups.com, "petros0022"
      > > > > > > <petros0022@> wrote:
      > > > > > > >
      > > > > > > > Hello from Greece
      > > > > > > > I like to ask you ,i can to make a temblate variables
      > about
      > > > min-
      > > > > > max
      > > > > > > > weather data every day , temperature-humidity-pressure-
      > wind-
      > > > dew
      > > > > > point-
      > > > > > > > barometer ?
      > > > > > > > And if yes how is the way ?
      > > > > > > >
      > > > > > > > Thank you
      > > > > > > > Dimitris from Greece
      > > > > > > > http://www.geocities.com/meteo19671967
      > > > > > > >
      > > > > > >
      > > > > >
      > > > >
      > > >
      > >
      >
    • Show all 11 messages in this topic