Loading ...
Sorry, an error occurred while loading the content.

18024Re: B152 Release.

Expand Messages
  • wuhu_software
    Dec 1, 2010
    • 0 Attachment
      Mike,

      So the swap axis did work to correct on it's own?

      Thanks.


      --- In wuhu_software_group@yahoogroups.com, "Mike" <mike.a.p@...> wrote:
      >
      > Ok fixed it; value format was set to 0.
      >
      > >
      > >
      > >
      > > Heath,
      > > so now if I swap, I get RH axis wind speed: 0, 1, 1.5, 2, 2.5, 3,
      > > 3.5, 4, 4.5, etc, etc
      > > but if I put the wind speed on the LH axis I get: 0, 1, 1, 2, 2, 3,
      > > 3, 4, 4, etc, etc (no
      > > x.5s) (increment is set to 0.1 for both axis)
      > >
      > > -Mike
      > > >
      > > >
      > > >
      > > > Mike,
      > > >
      > > > Yes that was the problem, the swap axis after the install of the
      > > > latest version should have
      > > > addressed that.
      > > >
      > > > Thanks.
      > > >
      > > > --- In wuhu_software_group@yahoogroups.com, "Mike"
      > > <mike.a.p@>
      > > > wrote:
      > > > >
      > > > > Heath,
      > > > > Unfortunately this fix didn't address this problem - but
      > > poking
      > > > around on the chart
      > > > > edit. I see that my axis increment was somehow set to 45, I set
      > > it
      > > > to 1 and now the axis
      > > > > shows up, 0 - 11 - all good.
      > > > >
      > > > > Thanks,
      > > > > Mike
      > > > >
      > > > > >
      > > > > >
      > > > > >
      > > > > > Mike,
      > > > > >
      > > > > > Please download the latest refresh then swap the axis on the
      > > > wind
      > > > > > chart.
      > > > > >
      > > > > > That should fix the problem.
      > > > > >
      > > > > > Thanks
      > > > > >
      > > > > > ---
      > > > > >
      > > > > > Software Download:
      > > > > >
      > > > > > WUHU216_32.zip
      > > > > >
      > > > > >
      > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
      > > > > > <wuhu_software@>
      > > > > > wrote:
      > > > > > >
      > > > > > >
      > > > > > > I found the problem and will upload when I can.
      > > > > > >
      > > > > > > Apparently there is a problem with the Comcast FTP server.
      > > > > > >
      > > > > > > Thanks
      > > > > > >
      > > > > > > --- In wuhu_software_group@yahoogroups.com, "Mike"
      > > mike.a.p@
      > > > > > wrote:
      > > > > > > >
      > > > > > > > Don't know if this is related to the current upgrade...
      > > > > > > >
      > > > > > > > But I'm getting just a 0 (zero) on the Wind chart for
      > > the
      > > > wind
      > > > > > speed axis, i.e. the graph
      > > > > > > > is showing data but the axis only shows 0 (checking and
      > > > > > unchecking automatic on the
      > > > > > > > axis makes no difference)
      > > > > > > >
      > > > > > > > See pic attached.
      > > > > > > >
      > > > > > > > -Mike
      > > > > > > >
      > > > > > > >
      > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > > > I found a bug on the swapping of the vertical axis for
      > > > the
      > > > > > rain
      > > > > > > > > chart.
      > > > > > > > >
      > > > > > > > > I have refreshed the image.
      > > > > > > > >
      > > > > > > > > ---
      > > > > > > > >
      > > > > > > > > Software Download:
      > > > > > > > >
      > > > > > > > > WUHU216_32.zip
      > > > > > > > >
      > > > > > > > >
      > > > > > > > > --- In wuhu_software_group@yahoogroups.com, "H. Smith"
      > > > > > > > > <wuhu_software@> wrote:
      > > > > > > > > >
      > > > > > > > > >
      > > > > > > > > > I do need to clean up on the webspace... Next
      > > > release...
      > > > > > > > > > Thanks.
      > > > > > > > > >
      > > > > > > > > > --- On Mon, 11/29/10, Don Lafferty don@ wrote:
      > > > > >
      > > > >
      > > >
      > > >
      > > >
      > >
      > >
      > >
      >
    • Show all 27 messages in this topic