13895Re: Inspeed Vortex
- Mar 3, 2009Dennis, glad it worked, you will love the Inspeed. I have had mine for a year now.
--- In firstname.lastname@example.org, D Doty <oldcessna21@...> wrote:
> Thanks Steve.
> I found the part in the forums where it said to change the alternate wind sensor to
> type 1, but did not find the specific instructions to add the alt sensor port line to the .ini file.
> Done now and all working fine.
> Dennis IZAMBALES1 / CW7056
> From: steve_03222 <steve_03222@...>
> To: email@example.com
> Sent: Wednesday, March 4, 2009 6:36:14 AM
> Subject: [wuhu_software_group] Re: Inspeed Vortex
> Dennis I found this in the forums
> "To enable the Inspeed, you add the following to the INI file in the
> general setting section:
> [General Settings]
> Alternate Wind Sensor Type=1
> Alternate Wind Sensor Port=COM4"
> or what ever comm port your Inspeed is set up on.
> --- In wuhu_software_ group@yahoogroup s.com, "oldcessna21" <oldcessna21@ ...> wrote:
> > Hi Folks;
> > This is Dennis from IZAMBALE1 in the Philippines.
> > I just installed a Davis Pro II to replace my WMR968. (The anemometer
> > failed)
> > When I purchased the Davis pro, I also purchased an Inspeed Vortex
> > anemometer.
> > Both are now installed, and the Davis is working as advertised, but
> > when I try to access the Vortex, the computer responds that it cannot
> > find the alternate sensor on the port specified. I have tried to
> > change the specified port in the .ini file and that changes the the
> > port of the weather station.
> > Can someone explain what I need to do to gather the info from the
> > Vortex? The station is on com1 and the vortex is on com4.
> > Any help will be appreciated.
> > Dennis
- << Previous post in topic Next post in topic >>