Re: [wsjtgroup] Startup Order of Audio Streams in Windows-7
- Hey Bob,Ya know, WSJT is open-source code. You can do it yourself! What a keen idea!!And that ‘s probably about the only way it’s going to get done. I know your “100k lines of code” was a SLIGHT exaggeration ... You can do it in your SPARE TIME!LOLHave fun Bob – Hope you needed NM on the bands I’ve been working you on lately (80m etc) – If you need 160, no joy on this end. I don’t have any antenna that will load on that band.....73Bill W5WVO
whoops, I forgot to see that there were two recipients me and the wsjt group
On 10/13/2011 9:51 PM, Barry Garratt wrote:
>The only different I see is that use an external USB
Did you forget a word: "you" maybe? otherwise I am unclear why it can't
happen to you.
See, Windows takes whatever it finds ... in my case an external USB
device mapped to Audio: SignaLink-USB
If I opted to always use the internal audio, I would have to connect the
microphone-input to the receive output, a PITA with little control.
The way I am running it now, I have JT65hf and FLdigi running at the
same time. Also DXLAB-suite ... they are all reading my FT-950.
Except when I boot up I have to go and change the gd numbers around
FLDigi searches for String name associated with each device number. In
my case it's USB Audio Codec ///sometimes that string goes to 03 and
sometimes to 04 .. who cares.... If WSJT9 would just look for the
String Name which the device ALWAYS sends to the operating system at
Pretty simple concept. Easy to say but we aren't looking at the 100k
lines of code either (previously a programmer)