Loading ...
Sorry, an error occurred while loading the content.
 

Re: [wsjtgroup] JT65A xmit after brk @ 45 sec

Expand Messages
  • WY5R
    Bob, Are you manually transmitting or using the Auto transmit? From your description, two questions come to mind. Is your clock set, and you are manually
    Message 1 of 4 , Dec 26, 2009
      Bob,
       
      Are you manually transmitting or using the Auto transmit?  From your description, two questions come to mind.  Is your clock set, and you are manually transmitting.  Make sure the clock is set, and use the Auto transmit button (assuming WSJT).
       
      73's de KD - WY5R
       
       
      ----- Original Message -----
      From: Bob KD7YZ
      To: WSJT
      Sent: Friday, December 25, 2009 5:35 PM
      Subject: [wsjtgroup] JT65A xmit after brk @ 45 sec

       

      sometimes .... somewheres about 45 seconds into sending, the program
      stops, the txcvr reverts to rx and then JT65A keys the rig and continues
      until "00"

      I haven't noticed a pattern. I have seen that other stations do the same.

      It's my understanding that the program stops so the receiving station
      may work out the decode sequence.

      Thus, my feeble newbie mind concludes that the extra transmitting on my
      art is fruitless.

      --
      Bob

    Your message has been successfully submitted and would be delivered to recipients shortly.