RE: [wsjtgroup] WSJT on Netbook?
Thanks very much – this looks like the solution. And your web page write up is great.
73, Bud N7CW
From: email@example.com [mailto: firstname.lastname@example.org ] On Behalf Of Peter Frenning [OZ1PIF]
Sent: Friday, April 10, 2009 3:01 PM
To: Bud Semon N7CW
Subject: Re: [wsjtgroup] WSJT on Netbook?
Bud Semon N7CW skrev:
I recently purchased a Samsung NC10 netbook and have been trying to make it work with WSJT. The problem I’m having is that the SpecJT display appears to contain large noise spikes randomly, although occurring very often, distributed across the 30 seconds and when it transfers to WSJT6 decode window, it decodes a lot of gibberish. The noise spikes are large enough to cause the Rx noise level display to jump around by a dB or 2. The netbook has only a microphone input and headphones output and I’m using isolation transformers on both. I tried an attenuator on the microphone input, but that didn’t make any difference. I’ve tried 2 radios and they both act the same. I suspect that the processor just can’t keep up, but I have adjusted the application priority up to realtime and that made no detectable difference. The tone generation and transmit path seem to work fine. My next step is to try a newer laptop, but I wondered if anyone has any ideas or suggestions? I’m going to be doing some grid expeditions this spring and summer and the netbook would be much nicer to use.
Thanks and 73,
In my experience, you'll be much better off leaving the on-board sound device for your other sound usages, and purchase either a cheap USB sound "card" or a complete device like the "SignaLink USB" (See : http://www.frenning .dk/OZ1PIF_ HOMEPAGE/ SignaLinkUSB- mods.html for caveats).
And btw: this is valid not just for Notebooks, but for all on-board devices, and regardless of which OS you prefer.
Vy 73 de OZ1PIF/5Q2M, Peter
** CW: Who? Me? You must be joking!! **
email: peter(no-spam-filler) @frenning. dk
Ph. +45 4619 3239
DK-4130 Viby Sj.
************ ********* ********* *****