Loading ...
Sorry, an error occurred while loading the content.

Re: [wsjtgroup] WSJT/WSPR

Expand Messages
  • Andrew O'Brien
    I assume you have pressed the monitor button and the Rx noise is now somewhere around 0dB when NO stations are present ? Andy ... -- Andy K3UK
    Message 1 of 3 , Jul 26, 2008
    • 0 Attachment
      I assume you have pressed the monitor button and the Rx noise is now
      somewhere around 0dB when NO stations are present ?

      Andy



      On Sat, Jul 26, 2008 at 12:23 PM, Andrew O'Brien <andrewobrie@...> wrote:
      > The original version of WSPR was one way only. 30 meter with dial
      > frequency at 10.1386 was the default frequency. In WSJT's latest beta
      > release you can now do two-way WSPR. Set your dial on 10.139 and use
      > the SpecJT in Frequency Axis mode (that's what I am used to, anyway)
      > and you will see old fashioned beacon WSPR'ers around the 1200 mark.
      > two was WSPRing QSO seekers usually show up around the 1500 mark.
      > Watch several signals at once and double click on the signals in
      > SpectJT and you can determine the callsigns of the multiple signals
      >
      > if you want to beacon only, use the latest release of WSPR, not WSJT.
      >
      > Andy K3UK
      >
      > On Sat, Jul 26, 2008 at 11:49 AM, <wy4d@...> wrote:
      >> Just downloaded WSJT7...In the WSPR mode I don't see any decodes. Is there a
      >> beacon mode in v7?..Can someone point me to a how to do primer for this
      >> mode. I have many questions about a lot of these new modes being offered in
      >> WSJT7
      >> de WY4D Ben
      >>
      >>
      >
      >
      >
      > --
      > Andy K3UK
      > www.obriensweb.com
      > (QSL via N2RJ)
      >



      --
      Andy K3UK
      www.obriensweb.com
      (QSL via N2RJ)
    Your message has been successfully submitted and would be delivered to recipients shortly.