RE: Stuck Com Port...
- Hi Tip,
Thanks for the email, it was appreciated.
I don't use any com port for TX/RX, it's all taken care of by the rigexpert
box. That just uses a USB lead to the PC, and then flying leads to the
It's my guess that there's a problem with the new version and how it works
with the rigexpert box. Strange as the older version still works with it.
From: Randy Tipton [mailto:wa5ufh@...]
Sent: 16 November 2005 17:53
Subject: Stuck Com Port...
This is what was recommended for a stuck comport with the older versions of
Maybe this willhelp...
Taken from WSJT Primer & WB5APD web page...
If after Updating Your Operating system with the Windows Update the Com Port
is still stuck in transmit check the following.
Go to Device Manager
Properties / port settings
Setting that should work for you are listed below:
Bits Per Second = 9600
Data Bits = 8
Stop Bits =1
Flow Control =Xon/Xoff
Use FIFO Buffers 16550 UART = checked