Loading ...
Sorry, an error occurred while loading the content.

RE: [wsjtgroup] JT65B- not printing calls

Expand Messages
  • John Lemay
    Eugene I work lots of JT65B on VHF but I m not too familiar with HF data modes. However, I ve taken a quick look on 20m and found some JT65A signals. You need
    Message 1 of 6 , Sep 21 5:24 AM
    • 0 Attachment

      Eugene

       

      I work lots of JT65B on VHF but I’m not too familiar with HF data modes.

       

      However, I’ve taken a quick look on 20m and found some JT65A signals. You need to select the correct mode (from the Mode pull down menu).

       

      John G4ZTR

       


      From: wsjtgroup@yahoogroups.com [mailto:wsjtgroup@yahoogroups.com] On Behalf Of Eugene Morgan
      Sent: 21 September 2013 10:44
      To: wsjtgroup@yahoogroups.com
      Subject: RE: [wsjtgroup] JT65B- not printing calls

       

       

      Hi Bruce and Rudy,

       

      Please accept this reply to both of you.

       

      Thank you both for your information and suggestions – I will pass this on to my son, Ciaran /M0XTD. We live about 150 miles apart and trying to do this with Skype and screen-shots. He has applied to join the group but this may take a few days – at which point he will take over, if we haven’t solved the problem by then!

       

      We have read the manual and downloaded the .WAV files but so far without success. I started him off on 20m and the band was full of JT65B signals – I mirrored his settings and I was able to decode all the signals and he also was receiving the same signal but his print-out did not show the calls/grid.

       

      I will not be able to speak with my son until later today when I will pass on both your emails. And we will go from there.

       

      73 de Eugene/G4AIU

       

    Your message has been successfully submitted and would be delivered to recipients shortly.