Loading ...
Sorry, an error occurred while loading the content.
 

WSJT-X split freq

Expand Messages
  • georgesdaniel@bellsouth.net
    I just joined the Yahoo Group yesterday and saw your messages pertaining to the wrong transmit frequency anomaly. My config: TS-590, Ham Radio Deluxe, WSJT-X
    Message 1 of 2 , Sep 5, 2013
      I just joined the Yahoo Group yesterday and saw your messages pertaining to the wrong transmit frequency anomaly. My config: TS-590, Ham Radio Deluxe, WSJT-X r3563. Here is my experience:

      Been using WSJT-X for about 3 months, and really enjoy using the
      program. Just this week I installed r3563 and learned about the
      SPLIT mode.

      While using Split mode, I have had the exact same experience (as
      others have reported)with the wrong transmit frequency. I am
      using a TS-590 and am also running Ham Radio Deluxe in the
      background. I tried using COMMANDER for CAT control and had the
      same results, as with using WSJT-X for direct CAT control:

      When attempting to use SPLIT mode, the TS-590 is correctly in
      split configuration. When I move (double-click) the cursor along
      the Wide graph, I see the VFO B frequency change on the radio, as
      expected with a +/- 500, 1000, 1500, or 2000 hz being set by
      WSJT-X. Looks good at this point. After I transmit, when I get a
      reply, the other station is off my displayed WIDE GRAPH frequency by +/- 500, 1000, etc.

      WSJT-X configuration: Lock Tx=Rx is selected, PTT is VOX, Kenwood
      TS-590 settings are correct for the CAT Comm port, SPLIT mode
      selected, Data is selected, Polling interval 1. Audio in/out is
      USB Audio. Can't find the onboard sound card settings to verify
      48000 sampling rate, but assume it is correct since I have been using the program satisfactorily in simple mode for a few months. Perhaps,
      that is an issue (?)

      Have you had any more luck with this anomaly Dan? Thanks.

      73,
      George
      AB4KN
    • Rudy Benner
      I would suggest a QSO with someone who has it working correctly. That way you are getting accurate information. ve3bdr From: georgesdaniel@bellsouth.net Sent:
      Message 2 of 2 , Sep 5, 2013
        I would suggest a QSO with someone who has it working correctly.
         
        That way you are getting accurate information.
         
        ve3bdr
         
        Sent: Thursday, September 05, 2013 12:27 PM
        Subject: [wsjtgroup] WSJT-X split freq
         
         

        I just joined the Yahoo Group yesterday and saw your messages pertaining to the wrong transmit frequency anomaly. My config: TS-590, Ham Radio Deluxe, WSJT-X r3563. Here is my experience:

        Been using WSJT-X for about 3 months, and really enjoy using the
        program. Just this week I installed r3563 and learned about the
        SPLIT mode.

        While using Split mode, I have had the exact same experience (as
        others have reported)with the wrong transmit frequency. I am
        using a TS-590 and am also running Ham Radio Deluxe in the
        background. I tried using COMMANDER for CAT control and had the
        same results, as with using WSJT-X for direct CAT control:

        When attempting to use SPLIT mode, the TS-590 is correctly in
        split configuration. When I move (double-click) the cursor along
        the Wide graph, I see the VFO B frequency change on the radio, as
        expected with a +/- 500, 1000, 1500, or 2000 hz being set by
        WSJT-X. Looks good at this point. After I transmit, when I get a
        reply, the other station is off my displayed WIDE GRAPH frequency by +/- 500, 1000, etc.

        WSJT-X configuration: Lock Tx=Rx is selected, PTT is VOX, Kenwood
        TS-590 settings are correct for the CAT Comm port, SPLIT mode
        selected, Data is selected, Polling interval 1. Audio in/out is
        USB Audio. Can't find the onboard sound card settings to verify
        48000 sampling rate, but assume it is correct since I have been using the program satisfactorily in simple mode for a few months. Perhaps,
        that is an issue (?)

        Have you had any more luck with this anomaly Dan? Thanks.

        73,
        George
        AB4KN

      Your message has been successfully submitted and would be delivered to recipients shortly.