Loading ...
Sorry, an error occurred while loading the content.
 

Re: CAT and WSJT-X

Expand Messages
  • Roger Kendall
    Hi Charles, The CAT doesn t go through the SignaLink as this only interfaces the audio in/out to the TS2000 and operates the PTT function which is activated
    Message 1 of 4 , Aug 27, 2013
      Hi Charles,

      The CAT doesn't go through the SignaLink as this only interfaces the audio
      in/out to the TS2000 and operates the PTT function which is activated
      internally on TX by the SignaLinkUSB. You need a matching cable between the
      TS2000 ACC(13 pin) connector and the SignaLink (you specify the appropriate
      cable when buying the interface). All other CAT functions of the TS2000 can
      be accessed independently using a computer control system such as HRD,
      ARCSII, ARCP etc all of which require a serial cable connection between
      computer and TS2000. Feel free to contact me directly if you have any other
      queries about the setup.

      Roger, G8BNE
    Your message has been successfully submitted and would be delivered to recipients shortly.