Loading ...
Sorry, an error occurred while loading the content.
 

Re: VFO B Freq Not Changing on TX

Expand Messages
  • kc2nyu
    Thanks to Sam K5OAI, I found out that I did not have split checked in WSJT-X configuration. That seems to have it squared away. 73 Paul
    Message 1 of 4 , Jul 18, 2013
      Thanks to Sam K5OAI, I found out that I did not have "split" checked in WSJT-X configuration. That seems to have it squared away.

      73 Paul

      --- In wsjtgroup@yahoogroups.com, "charlie cartmel" <chas@...> wrote:
      >
      > Paul
      >
      > Is split mode selected in both the rig and WSJT-Z?
      >
      > Also if the 'tone' is within the normal passband then the TX frequency need
      > not change (I think).
      >
      >
      >
      > 73
      >
      > Charlie
      >
      > www.G4EST.me.uk
      >
      >
      >
      >
      >
      > From: wsjtgroup@yahoogroups.com [mailto:wsjtgroup@yahoogroups.com] On Behalf
      > Of kc2nyu
      > Sent: 18 July 2013 17:47
      > To: wsjtgroup@yahoogroups.com
      > Subject: [wsjtgroup] VFO B Freq Not Changing on TX
      >
      >
      >
      >
      >
      > I am using a K3 with Signalink usb interface with WSJT-X v1.1 r3487 which I
      > thought I had fully up and running yesterday. But this morning I noticed
      > that with Mode JT9+JT65 selected, dial freq at 14.076, I am receiving both
      > modes just fine, but when I respond to a JT9 CQ, VFO B freq is not changing
      > to 14.078. I have double checked that both VFO's are in Data Mode, I am in
      > Data A and have split mode selected. What am I missing or doing wrong?
      >
      > TU & 73
      > Paul
      > kc2nyu
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.