Loading ...
Sorry, an error occurred while loading the content.

Re: [dxlab] Commander with new WSJT-X 1.1

Expand Messages
  • Joe Subich, W4TV
    ... In WSJT-X Set-up | Configuration (center right) set Polling interval (s) to something greater than 0. The orange button indicates you are set to only
    Message 1 of 5 , Jul 4, 2013
    • 0 Attachment
      > I am not sure why the frequency display in WSJT-X 1.1 does not follow
      > the rig until you press tghe orange button, but I suspect this is by
      > design.

      In WSJT-X Set-up | Configuration (center right) set Polling interval (s)
      to something greater than 0. The orange "button" indicates you are set
      to only send CAT data to Commander/the rig.

      73,

      ... Joe, W4TV


      On 7/4/2013 10:45 AM, Andrew O'Brien wrote:
      > Just a note to say how nice the latest version of Commander is for use
      > with WSJT-X 1.1 . After I upgraded via DX-Lab Launcher and selected
      > Commander (towards the bottom of the radio list in WSJT-X set-up
      > area) , WSJT-X is working well and keying my Kenwood or Flex radios as
      > desired. I am not sure why the frequency display in WSJT-X 1.1 does
      > not follow the rig until you press tghe orange button, but I suspect
      > this is by design. Changing the frequency in WSJT-X via the drop-down
      > list does QSY the rigs. PTT is easy . So, again we have full use of
      > the DX Lab Suite when using WSJT-X
      >
      > Andy K3UK
      >
      >
      > ------------------------------------
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
    • Andrew O'Brien
      Thanks, the polling was set at zero. All is well now. Andy
      Message 2 of 5 , Jul 4, 2013
      • 0 Attachment
        Thanks, the polling was set at zero. All is well now.
        Andy
      Your message has been successfully submitted and would be delivered to recipients shortly.