9018[wsjtgroup] KVASD_95 for ARM linux
- Jun 26, 2012Hi,
Forgot to put the list in cc:
2nd try. :-)
Kristoff - ON1ARFYes, I was aware of that. (hence the "I don't know who has the source-code" remark) :-)
-------- Original Message --------
Subject: Re: [wsjtgroup] KVASD_95 for ARM linux Date: Tue, 26 Jun 2012 08:26:52 +0200 From: Kristoff Bonne <kristoff@...> To: Joe Taylor <joe@...>
On 25-06-12 21:48, Joe Taylor wrote:
> I'm currently experimenting with wsjt on a pandaboard running ubuntu/ARM.
> When enabling "deep decode", I get an error on the console saying
> "KVASD_95 not found" (quit normal as the libraries provided as i386).
> Is there any way to provide an ARM version of these applications? I
> don't know who has the source-code for these, but it would be nice if
> somebody would cross-compile them for the ARM platform.
> This application could then run other ARM based systems too (e.g. like
> the Ras Pi). :-)
As you probably know, KVASD is a soft-decision decoder for the Reed
Solomon (63,12) code using six-bit symbols. It uses a petented
algorithm (see the note at bottom of this WSJT web page
There are three options:
- set up a ARM cross development enviroment on a i386 box
- set up a ARM emulator on i386
- Or else, I can provide you with an account on my pandaboard.
I already run WSPR on the pandaboard withouy any issues.
I have a small project to see what kind of ham-related project you can all run on these kind of boards.
In principle there's no reason it could not be compiled for the ARM
processor. Evidently there is not much demand; I have never before seen
such a request.
Two years ago, when I started this, there where only the "plug-computers" (like the sheeva-plug or guruplug), but now we have a whole range of options: high-end high-power boards like the pandaboard and the pandaboard, over the low-power (< 1W) board like the friendlyarm mini2440, boards dedicated for I/O like the beaglebone to "as cheap as possible" Ras Pi.
The new "Universal Digital Radio" John K9VE is working on is nothing else but an ARM board with a radio wrapped around it.
I now run WSPR on my pandaboard. The gmskmodem developement I do is on one of the boards I have, including real-time codec2 encoding/decoding on the pandaboard.
The ARM1176JZF-S does have a vector FPU and additional DSP core, so I think it mainly depends on the quality of the gcc optimalisation code for this processor.
I do not have an ARM-based machine on which to do the
compile. It's not clear that the Raspberry Pi has enough "horsepower"
to make it a useful platform for the JT65 mode.
But it also depends on what you want to do.
One thing I think of is -concidering the small size and power of Raspberry Pi- a platform for a JT65 monitoring device. Connect it to a HF receiver somewhere and let it continuesly monitor the JT65 frequencies and upload the spots to the net. It can use up to a whole minute to decode the audio.
No need for a GUI for that, so less code. Cheaper then a PC, less power-consumpting that a PC and no fans that make noise.
-- 73, Joe, K1JT
Kristoff - ON1ARF
- << Previous post in topic